WesloメーカーWEBE13810の使用説明書/サービス説明書
ページ先へ移動 of 16
Model No. WEBE13810 Serial No. Write the serial number in the space above for future reference. CAUTION Read all precautions and instruc- tions in this manual before using this equipment. Save this manual for future reference. Serial Number Decal USER’S MANUAL Visit our website at www .
2 IMPORT ANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3 W ARNING: T o reduce the risk of serious injury , read the following important precautions before using the weight bench. 1. Read all instructions in this manual before using the weight bench. Use the weight bench only as described in this manual. 2.
4 Backrest Weight Rests Support Rod Upright Lat Bar Cable Leg Lever Weight T ube Weight T ube Weight Carriage Lat T ower Fly Arm Thank you for selecting the WEIDER ® 140 weight bench. The versatile WEIDER ® 140 weight bench is designed to be used with your own weight set (not included) to develop every major muscle group of the body .
5 This chart is provided to help you identify the small parts used in assembly . The number in parenthesis below each part refers to the key number of the part from the P ART LIST on page 14. Important: Some parts may have been pre-assembled for shipping purposes.
Before beginning assembly , carefully read the following information and instructions: • Assembly requires two people. • For help identifying small parts, use the P ART IDENTIFICA TION CHART on page 5. • T ighten all parts as you assemble them, unless instructed to do otherwise.
3. Attach the Frame (2) to the Crossbar (3) with two M8 x 57mm Bolts (18), two M8 W ashers (16), and two M8 Nylon Locknuts (17). Note: Do not tighten the Nylon Locknuts yet. 4. T ap a 30mm Square Inner Cap (22) into each end of the Leg Lever (4). T ap a 1” Round Inner Cap (24) into the indicated end of the weight tube on the Leg Lever (4).
8 7. T ap two 1” Square Inner Caps (35) into each of the two Backrest T ubes (5). Attach each Backrest T ube (5) to the Backrest (6) with two M6 x 38mm Screws (30) and two M6 W ashers (26). Note: Do not tighten the Screws yet. 8. T ap a 3/4” Round Inner Cap (9) into each end of the Support Rod (7).
9 1 1. T ap a Fly Arm Stop (15) onto the welded tube on each Upright (1). Press two Plastic Bushings (14) into the indicated holes in an Upright (1). Attach a Fly Arm (25) to the Upright using an M10 x 1 14mm Bolt (19) and a Butterfly Knob (13). Make sure the Fly Arm is on the outside of the Fly Arm Stop (15).
ADJUSTING THE BACKREST The Backrest (6) can be used in a declined position, a level position, or three inclined positions. T o use the Backrest in a declined position, remove the Support Rod (7) and lay the Backrest on the Crossbar (3).
11 A TT ACHING THE LA T TOWER For some exercises, the Lat T ower (40) needs to be attached to the weight bench. T o do this, remove the 38mm Square Inner Cap (21) from the Front Leg (8). Insert the Lat T ower into the Front Leg and align the indicated hole in the Lat T ower with the adjustment hole in the Front Leg.
12 EXERCISE GUIDELINES THE FOUR BASIC TYPES OF WORKOUTS Muscle Building T o increase the size and strength of your muscles, push them close to their maximum capacity . Y our mus- cles will continually adapt and grow as you progres- sively increase the intensity of your exercise.
13 Rest for a short period of time after each set. The ideal resting periods are: • Rest for three minutes after each set for a muscle building workout. • Rest for one minute after each set for a toning work- out. • Rest for 30 seconds after each set for a weight loss workout.
14 Key No. Qt y . Description 1 2 Upright 2 1 Frame 3 1 Crossbar 4 1 Leg Lever 5 2 Backrest T ube 6 1 Backrest 7 1 Support Rod 8 1 Front Leg 9 8 3/4” Round Inner Cap 10 2 Long Pad T ube 1 1 1 Seat 1.
7 11 2 21 3 21 8 25 18 18 14 13 16 16 15 17 16 19 9 24 28 22 22 27 17 18 31 1 12 9 9 26 14 17 1 13 15 14 17 16 16 14 21 25 22 27 22 19 24 28 9 12 29 29 26 10 22 23 9 24 4 9 23 9 22 32 33 20 30 6 5 30 .
LIMITED W ARRANTY Part No. 176982 R0801A Printed in China © 2001 ICON Health & Fitness, Inc. T o order replacement parts, call our Customer Service Department toll-free at 1-800-999-3756, Monday through Friday , 6 a.m. until 6 p.m. Mountain T ime (excluding holidays).
デバイスWeslo WEBE13810の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Weslo WEBE13810をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはWeslo WEBE13810の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Weslo WEBE13810の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Weslo WEBE13810で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Weslo WEBE13810を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はWeslo WEBE13810の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Weslo WEBE13810に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちWeslo WEBE13810デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。