WesloメーカーWLTL35530の使用説明書/サービス説明書
ページ先へ移動 of 19
Serial Number Decal USER'S MANUAL Model No. WLTL35530 Serial No. CAUTION Read all precautions and instruc- tions in this manual before using this equipment.
T ABLE OF CONTENTS IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
The decals shown have been placed on your treadmill. If a decal is missing, or if it is not legible, please call our Customer Service Department, toll-free, to order a free replace- ment decal (see ORDERING REPLACEMENT PARTS on the back cover of this manual).
Congratulations for selecting the new WESLO ® CA- DENCE R20 treadmill. The CADENCE R20 treadmill combines advanced technology with innovative design to help you get the most from your exercise in th e con- venience and privacy of y our h ome.
ASSEMBL Y Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials. Do not dispose of the packing materials until assembly is completed. Note: The underside of the treadmill walking belt is coated with high-performance lubricant.
6 4. Identify the Right Handrail (47), which has a large hole in the left side. Attach two Cage Nuts (35 [not shown]) to the inside of the bracket on the Right Handrail as de- scribed in step 3. Feed the Wire Harness (21) into the hole in the bottom of the Right Handrail and out of the large hole in the left side.
9. Make sure that all parts are properly tightened before you use the treadmill. Note: Extra hardware may be included. Keep the included allen wrenches in a secure place. The large allen wrench is used to adjust the walking belt (see page 14). To protect the floor or carpet, place a mat under the treadmill.
8 OPERA TION AND ADJUSTMENT THE PERFORMANT LUBE TM WALKING BELT Your treadmill features a walking belt coated with PERFORMANT LUBE TM , a high-performance lubricant. IMPORTANT: Never apply silicone spray or other substances to the walking belt or the walking plat- form.
9 STEP-BY-STEP CONSOLE OPERATION Before operating the console, make sure that the power cord is properly plugged in (see page 8). The on/off circuit breaker near the power cord should be in the reset position (see page 13). Next, stand on the foot rails of the treadmill.
10 To stop the walking belt, press the Stop button. The Time display will begin to flash. Note: During the first few minutes that the treadmill is used, inspect the alignment of the walking belt and align it if necessary (see page 14). Change the incline of the treadmill as desired.
11 1 1 THE INFORMATION MODE The console features an information mode that keeps track of the total number of hours that the treadmill has been operated and the total number of miles that the walking belt has moved. The information mode also al- lows you to switch the console from miles per hour to kilometers per hour.
HOW T O FOLD AND MOVE THE TREADMILL HOW TO FOLD THE TREADMILL FOR STORAGE Before folding the treadmill, unplug the power cord. CAUTION: You must be able to safely lift 45 pounds (20 kg) in order to raise, lower, or move the treadmill. 1. Hold the treadmill with your hands in the locations shown at the right.
13 TROUBLESHOOTING Most treadmill problems can be solved by following the steps below. Find the symptom that applies, and follow the steps listed. If further assistance is needed, please call our Customer Service Department toll- free at 1-800-999-3756, Monday through Friday, 6 a.
PROBLEM: The walking belt slows when walked on SOLUTION: a. Use only a single-outlet surge suppressor that meets all of the specifications described on page 8. b. If the walking belt is overtightened, treadmill perfor- mance may decrease and the walking belt may be- come damaged.
CONDITIONING GUIDELINES The following guidelines will help you to plan your ex- ercise program. For more detailed exercise informa- tion, obtain a reputable book or consult your physician.
P ART LIST—Model No. WL TL35530 R1203A Key No. Qty. Description Key No. Qty. Description 1 1 Left Handrail 2 1 Key/Clip 3 2 Incline Leg Pivot Bolt 4 1 Cover 5 1 Left Foot Rail 6 1 Lift Motor 7 1 Rea.
Star W asher (29)–2 3/4” T ek Screw (3)–4 Frame Bolt (70)–2 Wheel Nut (38)–2 Handrail Bolt (42)–4 Upright Bolt (65)–4 1/4” W asher (38)–4 3/8” W asher (66)–8 Crossbar Screw (53).
22 65 25 24 56 25 42 25 77 59 40 33 33 33 60 33 33 40 102 102 33 39 39 13 58 57 13 14 99 2 46 25 33 43 44 45 50 15 48 48 39 51 23 81 25 73 61 63 15 69 68 67 93 5 74 84 83 39 83 39 66 7 48 16 38 38 75 .
Part No. 208761 R1203A Printed in USA © 2003 ICON Health & Fitness, Inc. ORDERING REPLACEMENT P ARTS To order replacement parts, call our Customer Service Department toll-free at 1-800-999-3756, Monday through Friday, 6 a.m. until 6 p.m. Mountain Time (excluding holidays).
デバイスWeslo WLTL35530の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Weslo WLTL35530をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはWeslo WLTL35530の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Weslo WLTL35530の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Weslo WLTL35530で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Weslo WLTL35530を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はWeslo WLTL35530の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Weslo WLTL35530に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちWeslo WLTL35530デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。