WesloメーカーWLTL46080の使用説明書/サービス説明書
ページ先へ移動 of 26
® USER'S MANUAL CAUTION Read all precautions and instructions in this manual before using this equipment. Keep this manual for future reference. Model No. WLTL46080 Serial No. QUESTIONS? As a manufacturer, we are committed to providing com- plete customer satisfaction.
2 T able of Contents IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3 1. It is the responsibility of the owner to ensure that all users of the CADENCE DL35 are adequately informed of all warnings and precautions. 2. Use the CADENCE DL35 only as described in this manual. 3. Place the CADENCE DL35 on a level surface, with eight feet of clearance behind it.
4 W ARNING: Before beginning this or any exercise program, consult your physician. This is especially important for persons over the age of 35 or persons with pre-existing health problems. Read all instructions before using. ICON assumes no responsibility for personal injury or property damage sustained by or through the use of this product.
5 Congratulations for purchasing the revolutionary WESLO ® CADENCE DL35 treadmill. The CADENCE DL35 offers both aerobic exercise and strength training exercise to help you achieve total fitness in the conve- nience and privacy of your home.
6 Part Identification Chart 3/8" Jam Nut (1 1) Catch Screw (126) 5/16" Nylon Locknut (15) 3/8" x 4 1/2" Pulley Bolt (44) 5/16" W asher (102) 3/8" x 1" Lat Bolt (141).
7 Assembly Everything in this manual is designed to ensure that the CADENCE DL35 can be assembled suc- cessfully by anyone. However, it is important to recognize that the CADENCE DL35 contains many parts and that the assembly process will take time.
8 3. You have one of two types of Carriage Pins (38). If you have type 2 (refer to the drawing), make sure the Carriage Pin Knob (39) is attached to the Carriage Pin (38). Slide the Weight Carriage (23) onto the Lat Tower (34). Make sure that the Weight Carriage is turned as shown in the inset drawing.
9 6. Lay the Lat Cable (40) over a Pulley (42). Slide the Cable Trap (47) and Pulley onto a 3/8” x 1 1/2” Pulley Bolt (46). Next, insert a Square Nut (30) into the bracket on the Lat Tower (34) and insert a screwdriver up into the bracket to hold the Square Nut in place.
10 11. Tap two 3/4” Inner Caps (12) into each Pad Tube (20). Insert the Pad Tubes (20) through the holes in the Leg Lever (14). Center the Pad Tubes and slide two Foam Pads (12) onto each Pad Tube. 10. Lubricate the 3/8” x 2 1/4” Bolt (10). Attach the Leg Lever (14) to the Bench Frame (5) with the Bolt and a 3/8” Jam Nut (11).
11 14. Attach the Seat (9) to the bracket on the Bench Frame (5) with two 1/4” x 3/4” Screws (3). 15. Press a Frame Cap (7), into the Bench Frame (5). Insert the Bench Pivot Rod (8) through the Bench Frame (5) as shown. Center the Bench Pivot Rod and slide a Bench Spacer (4) onto each end of it.
12 17. Insert the left end of the Bench Pivot Rod (8) into the indicated hole in the Lat Tower (34). Loosely thread a Bench Pivot Bolt (41) with a 5/16” Washer (102) into the end of the Bench Pivot Rod. Next, insert the right end of the Bench Pivot Rod (8) into the Upright (70) and slide the Corner Base (33) against the lower end of the Upright.
13 How to Operate the T readmill THE PERFORMANT LUBE TM WALKING BELT Your treadmill features a walking belt coated with PERFORMANT LUBE TM , a high-performance lubricant. Important: Never apply silicone spray or other sub- stances to the walking belt or the walking platform.
14 HOW TO LOWER THE TREADMILL FOR USE CAUTION: You must be able to safely lift 50 pounds (23 kg) in order to lower the treadmill. To lower the treadmill, hold the upper end of the treadmill with your right hand as shown. Using your left hand, slide the storage latch to the left.
STEP BY STEP CONSOLE OPERATION Make sure that batteries are installed in the console. (See assembly step 1 on page 7.) Next, make sure that the power cord is properly plugged in. (See How to Plug in the Power Cord on page 13). Step onto the foot rails of the treadmill.
Press the MODE button to select the desired monitor mode. The monitor offers five different modes to provide instant exercise feedback: • SPEED— displays your speed, in miles per hour. • TIME—displays the elapsed time. • DISTANCE—dis- plays the distance that you have walked or run, in miles.
17 How to Exercise on the T readmill EXERCISE INTENSITY Whether your goal is to burn fat or to strengthen your cardiovascular system, the key to achieving the desired results is to exercise with the proper intensity. The proper intensity level can be found by using your heart rate as a guide.
18 SUGGESTED STRETCHES Move slowly as you stretch—never bounce. 1. Hamstring Stretch Sit with one leg extended. Bring the sole of the opposite foot toward you and rest it against the inner thigh of your extended leg. Reach toward your toes as far as possible.
19 HOW TO ADJUST THE BACKREST To use the backrest in an inclined posi- tion, first lift the backrest. Insert the support rod through the in- dicated holes in the lat tower and the up- right. Rotate the support rod to the locked position, with the hook clipped onto the lat tower as shown.
20 The treadmill offers a variety of exercises designed to trim, tone, and strengthen the body. Please read these guidelines before using the weight bench. WARNING: Before beginning any exercise pro- gram, consult your physician. This is especially important for persons over the age of 35 or per- sons with pre-existing health problems.
21 T rouble-Shooting and Maintenance Most treadmill problems can be solved by following the steps below. Find the symptom that applies, and follow the steps listed. If further assistance is needed, please call our Customer Service Department toll- free at 1-800-999-3756, Monday through Friday, 6 a.
22 PROBLEM: The walking belt is off-center or slips when walked on SOLUTION: a. If the walking belt has shifted to the left , first re- move the key and UNPLUG THE POWER CORD . Using the allen wrench, turn the left rear roller adjust- ment bolt clockwise, and the right bolt counterclock- wise, 1/4 of a turn each.
Part List—Model No. WL TL46080 R0898E 1 1 Backrest 2 2 Backrest Bracket 3 6 1/4” x 3/4” Screw 4 2 Bench Spacer 5 1 Bench Frame 6 2 Bench Frame Bushing 7 3 Frame Cap 8 1 Bench Pivot Rod 9 1 Seat .
Part No. 148099 H02442DC R0898E Printed in USA © 1998 ICON Health & Fitness, Inc. How to Order Replacement Parts To order replacement parts, simply call our Customer Service Department toll-free at 1-800-999-3756, Monday through Friday, 6 a.m. until 6 p.
1 2 2 3 4 5 6 4 7 8 9 12 13 14 10 18 11 3 15 7 15 19 16 17 20 21 22 13 13 12 23 24 25 27 11 28 29 28 29 28 29 31 32 33 11 34 35 40 36 37 35 11 42 44 31 46 47 42 48 30 40 39 38 141 31 11 7 12 12 24 74 .
54 80* 49* 50 51 52 53 55 56 57 58 59 60 61 62 63 53 64 63 65 53 70 63 71 72 73 29 75 76 77 79 78 82 83 84 85 61 86 29 75 75 75 61 61 88 89 90 91 92 94 95 29 93 96 97 132 98 99 100 101 101 101 103 66 .
デバイスWeslo WLTL46080の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Weslo WLTL46080をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはWeslo WLTL46080の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Weslo WLTL46080の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Weslo WLTL46080で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Weslo WLTL46080を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はWeslo WLTL46080の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Weslo WLTL46080に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちWeslo WLTL46080デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
