BelkinメーカーN1の使用説明書/サービス説明書
ページ先へ移動 of 114
User Manual WIR ELES S MO DEM R OUT ER.
T abl e of Contents 1. Intr oduction ...................................... 1 Advantages of a Wireless Network .................... 1 Placement of your Router ........................... 2 2. Pr oduct Overview ................................. 6 Product Features .
section Intr oduction Thank you for purchasing the Belkin N1 Vision Wireless Modem Router (the Router). Following are two short sections—the first discusses the benefits of home networking, and the other outlines best practices that maximize your wireless home network range and performance.
Intr oduction 2 3 2 Revolutionary N1 Wir el ess T echnology with MIMO (N1 MIMO) Your Belkin N1 Vision Wireless Modem Router uses a new smart-antenna technology called Multiple Input Multiple Output (MIMO). N1 MIMO complies with the IEEE draft 802.11n specification.
2 section Intr oduction 3 2 If you have concerns about your network’s performance that might be related to range or obstruction factors, try moving the computer to a position between five and 10 feet from the Router in order to see if distance is the problem.
Intr oduction 4 5 4 3. Cor dless Phones If the performance of your wireless network is impaired after attending to the above issues, and you have a cordless phone: • Trymoving cordless phones awayfrom your Routerand your wireless-enabled computers.
4 section Intr oduction 5 4 5. Secur e Connections, VPNs, and AOL Secure connections typically require a user name and password, and are used where security is important.
Pr oduct Overvie w 6 7 6 Pr oduct F eatures In minutes you will be able to share your Internet connection and network your computers. The following is a list of features that make your new Belkin Router an ideal solution for your home or small office network.
6 section Pr oduct Overvie w 7 6 Integrated 10/100 4-Port Switch The Router has a built-in, four-port network switch to allow your wired computers to share printers, data and MP3 files, digital photos, and much more. The switch features automatic detection so it will adjust to the speed of connected devices.
Pr oduct Overvie w 9 8 Integrated N1 Wir eless Acc ess Point N1 MIMO is an exciting new wireless technology based on the draft IEEE 802.11n specification. It employs MIMO (Multiple Input Multiple Output) smart-antenna technology that achieves data rates of up to 300Mbps.
9 8 Knowing your Router section Package Contents • BelkinN1 Vision Wireless ModemRouter • QuickInstallation Guide • BelkinAssistant CD with UserManua.
10 Knowing your Router 11 10 Har dware Characteristics The Router has been designed to be placed on a desktop. All of the cables exit from the BACK of the Router for better organization and utility. The Router’s interactive display is easily visible on the FRONT of the Router to provide you with information about network activity and status.
10 11 10 Knowing your Router section A. Interactive Display The interactive display is on the front of the Router, which indicates which features are in operation. B. 4-W ay Keypad The keypad enables the movement of the up, down, left, and right function that may apply to the screen shown in the interactive display.
12 Knowing your Router 13 12 1 2 3 4 to powe r DC 12V / 1.25A to wired computer s ADSL por t Rese t (F) (H) (G) (E).
12 13 12 Knowing your Router section E. Connections to Wired Computers – Y ellow Ports Connect your wired (non-wireless) computers to these ports. Theseports are RJ45, 10/100/1000auto-negotiation, auto- uplinking ports for standard UTP category 5 or 6 Ethernet cable.
14 Connecting and Configuring your Router 15 14 V erif y the con te nts of you r bo x. Y ou should have the foll owing: • BelkinN1 Vision Wireless ModemRouter • QuickInstal.
16 Connecting and Configuring your Router 17 16 Step 1 Har dwar e Connections – Foll ow the Quick Installation Guide 1.1 Brand-New Setup Follow these steps if you are not replacing an existing modem. If you are replacing an existing modem, skip to the next section, “Replacing an Existing Modem or Modem Router”.
16 17 16 Connecting and Configuring your Router section 1. Plug the power supply into the wall outlet. 2. Plug the other end into the black port on the Router. 3. Locate the cable that connects your old modem to the ADSL wall jack. Unplug it from your old modem and then connect it to the gray port labeled “ADSL” on the back of your Router.
18 Connecting and Configuring your Router 19 18 Step 2 Set Up the Router – Using the Plug-and-Play Router Setup 3. Select the country you are located in by using the drop-down box. Click “Next” to continue. 2. The Belkin plug-and-play Setup Wizard should automatically appear.
18 19 18 Connecting and Configuring your Router section 6. If your Internet account requires VPI and VCI settings, you will be taken to this screen to enter this information. Click “Next” to save and continue. 7. The Router will now check for your Internet connection.
20 Connecting and Configuring your Router 21 20 Interactive Display The Router’s interactive display is a powerful instrument for viewing your network information. The display can provide essential router- status information such as the state of the Internet connection to details such as each device usage and speed of the Internet connection.
20 21 20 Connecting and Configuring your Router section 1. Int erne t Conne ctio n This icon shows you when the Router is connected to the Internet. OFF No Internet connection has been detected Solid White Router is connected to the Internet Blinking White Internet connection was detected; Router is not currently able to connect to the Internet 2.
22 Connecting and Configuring your Router 23 22 5. Wir eless Computers This icon represents if there are any wireless connections present. OFF Wireless device is not present Solid White Wireless device(s) is connected to the Router 6. Security This icon indicates wireless security.
22 23 22 Connecting and Configuring your Router section D. Connections/Speed This screen displays all devices currently connected to the Router and the speed of the broadband data that is being downloaded or uploaded per each device. G. Date & Time This screen displays the date and time.
24 Connecting and Configuring your Router 25 24 Menu Screen Push the “Menu” button to open the display’s Menu options. The Menu option allows you to enable features within the Router. The following outlines the details of each feature within the Menu section.
24 25 24 Connecting and Configuring your Router section To make a WPS connection, select the “New Connection” option. To do so, you must have WPS enabled on the computer or device connecting to the Router. You will need to push the WPS button in your computer or device within two minutes.
26 Connecting and Configuring your Router 27 26 T r oubleshooting Assist ant CD Belkin has provided our Assistant software to make installing your Router a simple and easy task.
26 27 26 Connecting and Configuring your Router section Confirmation Screen Verify that you have completed all QIG steps by checking the box to the right of the arrow. Click “Next” to continue. Progress Screen Setup Assistant will show you a progress screen each time a step in the setup has been completed.
28 Connecting and Configuring your Router 29 28 2.2 Verifying Hardware Connections The Setup Assistant will now verify your hardware connection. 2.3 Naming your Wireless Network The Setup Assistant will display the default wireless network name or Service Set Identifier (SSID).
28 29 28 Connecting and Configuring your Router section 2.4 Requesting Internet Account Info (if needed) Select your ISP from the drop-down boxes. If your Internet account requires a login and password, you will be prompted with a screen similar to the illustration below.
30 Connecting and Configuring your Router 31 30 2.6 Checking Internet Connection We are almost done. The Setup Assistant will now check your connection to the Internet. Congratulations You have finished installing your new Router. You will see the Congratulations screen when your Router can connect to the Internet.
30 31 30 Connecting and Configuring your Router section 2.7 Optional: Assistance Connecting Other Computers This optional step will help you to connect additional wired and wireless computers to your network.
32 Connecting and Configuring your Router 33 32 Step 3 Set Up Wirel ess Security – Run the Security Assistant Softwar e Now that your network is set up and working, it is recommended that you turn on wireless security to prevent unauthorized access to your network from neighboring wireless-enabled computers.
32 33 32 Connecting and Configuring your Router section 3.3 T ransferring the Key After setting up your wireless security, you will have to transfer the network key to each of your wireless computers. Click on “Transfer Key” if you have a USB flash drive.
34 Alternate Setup Method 35 34 Step 1 Har dwar e Connections – Foll ow the Quick Installation Guide (QIG) See the QIG or Step 1: Hardware Connections from the previous section.
34 35 34 Alternate Setup Method section Logging into the Router You will see the Router’s home page in your browser window. The home page is visible to any user who wants to see it. To make any changes to the Router’s settings, you have to log in.
36 Alternate Setup Method 37 36 1. Quick-Navigation Links You can go directly to any of the Router’s advanced UI pages by clicking directly on these links. The links are divided into logical categories and grouped by tabs to make finding a particular setting easier to find.
36 37 36 Alternate Setup Method section 4. Login/Logout Button This button enables you to log in and out of the Router with the press of one button. When you are logged into the Router, this button will change to read “Logout”. Logging into the Router will take you to a separate login page where you will need to enter a password.
38 Alternate Setup Method 39 38 Step 4 Configuring your Router f or Connection to your Internet Service Pr ovider (ISP) The“Internet/WAN” tab is whereyou will setup your Routerto connect to your Internet Service Provider (ISP).
38 39 38 Alternate Setup Method section Connection Type From the “Connection Type” page, you can select one of these five connection types based on the instruction provided by your ISP: • PPP.
40 Alternate Setup Method 41 40 Setting your ISP Connection T ype to PPPoE or PPPoA PPPoE (Point-to-Point Protocol over Ethernet) is the standard method of connecting networked devices. It requires a user name and password to access the network of your ISP for connecting to the Internet.
40 41 40 Alternate Setup Method section 6. Encapsulation – Select your encapsulation type here. (Supplied by your ISP) VC-MUX: PPPOA Virtual Circuit Multiplexer (null encapsulation) allows only one protocol running per virtual circuit with fewer overheads.
42 Alternate Setup Method 43 42 Setting your Connection Type to Dynamic/Fixed IP (1483 Bridged) This connection method bridges your network and ISP’s network together. The Router can obtain an IP address automatically from your ISP’s DHCP server or accept a fixed IP address assigned by your ISP.
42 43 42 Alternate Setup Method section Setting your ISP Connection T ype to Static IP (IPoA) This connection type is also called “Classical IP over ATM” or “CLIP”, which your ISP provides to a fixed IP for your Router to connect to the Internet.
44 Alternate Setup Method 45 44 Setting your Connection Type to Modem Only (Disable Internet Sharing) In this mode, the Router simply acts as a bridge passing packets across the DSL port. It requires additional software to be installed on your computers in order to access the Internet.
44 45 44 Alternate Setup Method section Setting Custom Domain Name Server (DNS) Settings A “Domain Name Server” is a server located on the Internet that translates Universal Resource Locaters (URLs) like “www.belkin.com” to IP addresses. Many Internet Service Providers (ISPs) do not require you to enter this information into the Router.
46 Alternate Setup Method 47 46 Configuring your WAN Media Acc ess Controll er (MAC) Addres s All network components including cards, adapters, and routers, have a unique “serial number” called a MAC address.
46 47 46 Using the W eb-Based Advanced User Interfac e section Using your Internet browser, you can access the Router’s Web-Based Advanced User Interface. In your browser, type “192.168.2.1” (do not typein anything else suchas “http://” or“www”) then pressthe “Enter” key.
48 Using the W eb-Based Advanced User Interfac e 49 48 Changing LAN Settings All settings for the internal LAN setup of the Router can be viewed and changed here. (1) (2) (5) (6) (4) (3) 1. IP Address The “IP address” is the internal IP address of the Router.
48 49 48 Using the W eb-Based Advanced User Interfac e section 3. DHCP Server The DHCP server function makes setting up a network very easy by assigning IP addresses to each computer on the network automatically.
50 Using the W eb-Based Advanced User Interfac e 51 50 Viewing the DHCP Client List Page You can view a list of the computers (known as clients), which are connected to your network.
50 51 50 Using the W eb-Based Advanced User Interfac e section Changing the Wirel ess Network Name (SSID) To identify your wireless network, a name called the SSID is used. The SSID is your network name. The default network name of the Router is “Belkin N1 Wireless” followed by six digits that are unique to your Router.
52 Using the W eb-Based Advanced User Interfac e 53 52 Changing the Wirel ess Channel There are a number of operating channels from which you can choose—in the United States, there are 11 and in the United Kingdom (and most of Europe), there are 13.
52 53 52 Using the W eb-Based Advanced User Interfac e section Using the Bandwidth Switch This switch allows you to set the Router’s wireless bandwidth modes. There are several modes available: 1) 20MHz only Setting the Router to this mode allows only 20MHz operation.
54 Using the W eb-Based Advanced User Interfac e 55 54 Using the Broadcas t SSID Featur e Note: This advanced feature should be employed by advanced users only. For security, you can choose not to broadcast your network’s SSID. Doing so will keep your network name hidden from computers that are scanning for the presence of wireless networks.
54 55 54 Using the W eb-Based Advanced User Interfac e section Using Wi-Fi Protected Setup WPS uses WPA2 for encryption. It does not provide additional security, but rather, standardizes the method for securing your wireless network.
56 Using the W eb-Based Advanced User Interfac e 57 56 1. Wi-Fi Protected Setup (WPS): Enabled or Disabled. 2. Personal Identification Number (PIN) Method: In this method, a wireless client wishing to access your network must supply a 4- or 8-digit PIN to the Router.
56 57 56 Using the W eb-Based Advanced User Interfac e section WP A2 Requirements IMPORT ANT: In order to use WPA2 security, all your computers and wireless client adapters must be upgraded with patches, driver, and client utility software that supported WPA2.
58 Using the W eb-Based Advanced User Interfac e 59 58 Setting WP A/WP A2-Per sonal (PSK) Like WPA security, WPA2 is available in both WPA2-Personal (PSK) mode and WPA2-Enterprise (RADIUS) mode.
58 59 58 Using the W eb-Based Advanced User Interfac e section IMPORT ANT: Make sure your wireless computers are updated to work with WPA2 and have the correct settings to get proper connection to the Router. Setting WP A Security Note: To use WPA security, your wireless network cards must be equipped with software that supports WPA.
60 Using the W eb-Based Advanced User Interfac e 61 60 Setting Guest Acc ess Within the WPA security page, the Guest-Access feature is available. Select this option to create a separate network that allows guests to connect to the Internet while keeping them away from accessing your network, computers, and private files.
60 61 60 Using the W eb-Based Advanced User Interfac e section Setting WEP Encryption Note to Mac users: The “Passphrase” option will not operate with Apple ® AirPort ® . To configure encryption for your Mac computer, set the encryption using the manual method described in the next section.
62 Using the W eb-Based Advanced User Interfac e 63 62 Using a Hexadecimal Key A hexadecimal key is a mixture of numbers and letters from A–F and 0–9. 64-bit keys are 10 digits long and can be divided into five two-digit numbers. 128-bit keys are 26 digits long and can be divided into 13 two-digit numbers.
62 63 62 Using the W eb-Based Advanced User Interfac e section Setting MAC Addres s Contr ol The MAC address filter is a powerful security feature that allows you to specify which computers are allowed on the wireless network. Note: This list applies only to wireless computers.
64 Using the W eb-Based Advanced User Interfac e 65 64 Setting up an Allo w Acces s List 1. Select the “Allow” radio button (1) to begin setting up a list of computers allowed to connect to the wireless network.
64 65 64 Using the W eb-Based Advanced User Interfac e section Configuring the Fir ewall Your Router is equipped with a firewall that will protect your network from a wide array of common hacker attac.
66 Using the W eb-Based Advanced User Interfac e 67 66 Configuring Internal F orwarding Settings The Virtual Servers function will allow you to route external (Internet) calls for services such as a web server (port 80), FTP server (Port 21), or other applications through your Router to your internal network.
66 67 66 Using the W eb-Based Advanced User Interfac e section Setting Client IP Filters The Router can be configured to restrict access to the Internet, e-mail, or other network services at specific days and times. Restriction can be set for a single computer, a range of computers, or multiple computers.
68 Using the W eb-Based Advanced User Interfac e 69 68 Enabling the Demilitarized Zone (DMZ) The DMZ feature allows you to specify one computer on your network to be placed outside of the firewall. This may be necessary if the firewall is causing problems with an application such as a game or video conferencing application.
68 69 68 Using the W eb-Based Advanced User Interfac e section Using Dynamic DNS The Dynamic DNS service allows you to alias a dynamic IP address to a static host name in any of the many domains DynDNS.org offers, allowing your network computers to be more easily accessed from various locations on the Internet.
70 Using the W eb-Based Advanced User Interfac e 71 70 Setting up the Router’ s Dynamic DNS Update Client You must register with DynDNS.org’s free update service before using this feature. Once you have your registration, follow the directions below.
70 71 70 Using the W eb-Based Advanced User Interfac e section Blocking an ICMP Ping Computer hackers use what is known as “pinging” to find potential victims on the Internet. By pinging a specific IP address and receiving a response from the IP address, a hacker can determine that something of interest might be there.
72 Using the W eb-Based Advanced User Interfac e 73 72 Utilities The “Utilities” screen lets you manage different parameters of the Router and perform certain administrative functions.
74 Using the W eb-Based Advanced User Interfac e 75 74 Restarting the Router Sometimes it may be necessary to restart or reboot the Router if it begins working improperly. Restarting or rebooting the Router will NOT delete any of your configuration settings.
74 75 74 Using the W eb-Based Advanced User Interfac e section Restoring F actory Default Settings Using this option will restore all of the settings in the Router to the factory (default) settings. It is recommended that you back up your settings before you restore all of the defaults.
76 Using the W eb-Based Advanced User Interfac e 77 76 Saving a Curr ent Configuration You can save your current configuration by using this feature. Saving your configuration will allow you to restore it later if your settings are lost or changed. It is recommended that you back up your current configuration before performing a firmware update.
76 77 76 Using the W eb-Based Advanced User Interfac e section 3. When the save is complete, you will see this window. Click “Close”. The configuration is now saved. Restoring a Pr evious Configuration This option will allow you to restore a previously saved configuration.
78 Using the W eb-Based Advanced User Interfac e 79 78 2. You will be asked if you want to continue. Click “OK”. 3. A reminder window will appear. It will take up to 60 seconds for the configuration restoration to complete. Click “OK”. 4. A 60-second countdown will appear on the screen.
78 79 78 Using the W eb-Based Advanced User Interfac e section Updating the Firmwar e From time to time, Belkin may release new versions of the Router’s firmware. Firmware updates contain feature improvements and fixes to problems that may have existed.
80 Using the W eb-Based Advanced User Interfac e 81 80 Downl oading a New V ersion of Firmware If you click the “Check Firmware” button and a new version of firmware is available, you will see a screen similar to the one below: 1. To download the new version of firmware, click “Download”.
80 81 80 Using the W eb-Based Advanced User Interfac e section Updating the Router’ s Firmwar e 1. In the “Firmware Update” page, click “Browse”. A window will open that allows you to select the location of the 3. When the save is complete, you will see the following window.
82 Using the W eb-Based Advanced User Interfac e 83 82 3. The “Update Firmware” box will now display the location and name of the firmware file you just selected.
82 83 82 Using the W eb-Based Advanced User Interfac e section Changing System Settings The “System Settings” page is where you can enter a new administrator password, set the time zone, enable remote management, and turn on and off the NAT function of the Router.
84 Using the W eb-Based Advanced User Interfac e 85 84 Setting the Time and Time Zone The Router keeps time by connecting to a Simple Network Time Protocol (SNTP) server.
84 85 84 Using the W eb-Based Advanced User Interfac e section Advanced Feature: The “Remote Access Port” option allows you to configure the desired “Remote Access Port for Remote Management” feature. The default access port is set to port 80.
Using the W eb-Based Advanced User Interfac e 87 86 Enabling/Disabling UPnP UPnP (Universal Plug-and-Play) is yet another advanced feature offered by your Belkin Router. It is a technology that offers seamless operation of voice messaging, video messaging, games, and other applications that are UPnP-compliant.
87 86 Manuall y Configuring Network Settings section Set up the computer that is connected to the ADSL modem FIRST using these steps. You can also use these steps to add computers to your Router after the Router has been set up to connect to the Internet.
88 Manuall y Configuring Network Settings 89 88 Manuall y Configuring Network Settings in Mac OS X 1. Click on the “System Preferences” icon. 2. Select “Network” (1) from the “System Preferences” menu. 3. Select “Built-in Ethernet” (2) next to “Show” in the Network menu.
88 89 88 Manuall y Configuring Network Settings section 4. Selectthe “TCP/IP” tab (3) . Next to “Configure” (4) , you should see “Manually” or “Using DHCP”. If you do not, check the PPPoE tab (5) to make sure that “Connect using PPPoE” is NOT selected.
90 Manuall y Configuring Network Settings 91 90 Manuall y Configuring Network Settings in Windows 2000, NT ® , or XP 1. Click “Start”, “Settings”, then “Control Panel”. 2. Double-click on the “Network and dial-up connections” icon (Windows 2000) or the “Network” icon (Windows XP).
90 91 90 Manuall y Configuring Network Settings section Manuall y Configuring Network Adapters in Windows 98SE or Me 1. Right-click on “My Network Neighborhood” and select “Properties” from the drop-down menu. 2. Select “TCP/IP Settings” foryour installed networkadapter.
92 Rec ommended W eb Br owser Settings 93 92 In most cases, you will not need to make any changes to your web browser’s settings. If you are having trouble accessing the Internet or the advanced web-based user interface, then change your browser’s settings to the recommended settings in this section.
92 93 92 Rec ommended W eb Br owser Settings section 4. Make sure there are no check marks next to any of the displayed options: “Automatically detect settings”, “Use automatic configuration script”, and “Use a proxy server”. Click “OK”.
94 T r oubl eshooting 95 94 Assistant CD does not automaticall y start. If the CD-ROM does not start the Assistant software automatically, it could be that the computer is running other applications that are interfering with the CD drive.
94 95 94 T r oubl eshooting section 2. Unplu g powe r to the Route r for 10 seco nds, and then plug the power back into the Router . Ensure that the Router’ s “router” Dis play is on . If not, check to mak e sur e tha t the AC adapt er is connected to the Router and plugged into a wall outlet.
96 T r oubl eshooting 97 96 • The Assistant software completed installation, but my web br owser doesn’t work. • I am unable to connect to the Internet. The “ ADSL ” icon on my Router is blinking, and the “internet” icon is blinking.
96 97 96 T r oubl eshooting section • The Assistant software completed installation, but my web br owser doesn’t work. • I am unable to connect to the Internet. The “ ADSL ” icon on my Router is on, and the “internet” icon is blinking.
98 T r oubl eshooting 99 98 • The Assistant software completed, but my web browser doesn’t work. • I am unable to connect to the Internet. The “ ADSL ” icon on my Router is blinking, and the “internet” icon is solid.
98 99 98 T r oubl eshooting section I can’t connect to the Internet wirel essl y. If you are unable to connect to the Internet from a wireless computer, please check the following items: 1. Look at the lights on your Router . They should be as foll ows: •The “router”iconshould beon.
100 T r oubl eshooting 101 100 I can’t connect to the Internet wirel essl y , but my network name is listed. If the name of your network is listed in the “Available Networks” list, please follow the steps below to connect wirelessly: 1. Click on the corr ect network name in the “ Available Networks” list.
100 101 100 T r oubl eshooting section • Mywirel essnetwork performanc e isinconsistent. • Datatransferis sometimesslow. • Signalstrengthis poor . • Difficultyestablishing and/ormaintaining a VirtualPrivate Network (VPN) connection.
102 T r oubl eshooting 103 102 I am having difficulty setting up Wir ed Equival ent Privacy (WEP) security on my Belkin Router . 1. Log into your Router . Open yo ur web br owse r and typ e in the IP ad dr es s of the Ro uter . (Th e Rout er’ s def aul t is 192.
102 103 102 T r oubl eshooting section I am having difficulty setting up Wir ed Equival ent Privacy (WEP) security on a Belkin client card. The client card must use the same key as the Router. For instance, if your Router uses the key 00112233445566778899AABBCC, then the client card must be set to the exact same key.
104 T r oubl eshooting 105 104 Do Belkin products support WPA? Note: To use WPA security, all your clients must be upgraded to drivers and software that support it. At the time of this FAQ publication, a security patch download is available, for free, from Microsoft.
104 105 104 T r oubl eshooting section I am having difficulty setting up Wirel ess Protected Acces s (WP A) security on a Belkin wirel ess client card for a home network. Clients must use the same key that the Router uses. For instance, if the key is “Smith Family Network Key” in the Router, the clients must also use that same key.
106 T r oubl eshooting 107 106 I am NOT using a Belkin client car d for a home network and I am having difficulty setting up Wir eless Pr otected Access (WP A) security.
106 107 106 T r oubl eshooting section 3. Under the “Wir eles s Networks” tab, click the “Configure” button and you wil l see the f oll ow ing scr een. 4. F or a home or small business user , sel ect “WP A-PSK” under “Network Administration”.
108 T r oubl eshooting 109 108 Wir eless Comparison Chart Wireless Technology 802.11b G (802.11g) G Plus (802.11g with HSM) G Plus MIMO (802.11g with MIMO MRC) N1 MIMO (draft 802.11n with MIMO) Speed* 11Mbps link rate/baseline 5x faster than 802.11b* 10x faster than 802.
108 109 108 T r oubl eshooting section F r ee T ech Support * You can find additional support information on our website www.belkin.com through the tech-support area. If you want to contact technical support by phone, please call the number you need from the list below*.
110 Information 111 110 Modifications The FCC requires the user to be notified that any changes or modifications to this device that are not expressly approved by Belkin International, Inc.
110 111 110 Information section Belkin International, Inc., Limited Lifetime Product Warranty What this warranty covers. Belkin International, Inc. (“Belkin”) warrants to the original purchaser of this Belkin product that the product shall be free of defects in design, assembly, material, or workmanship.
112 Information 113 112 Belkin reserves the right to review the damaged Belkin product. All costs of shipping the Belkin product to Belkin for inspection shall be borne solely by the purchaser.
112 113 112 Information section EC Declaration of Conformity to R&TTE Directive 1999/5/EC CE0560 Manufacturer : BELKIN LTD, EXPRESS BUSINESS PARK, SHIPTON WAY ,RUSHDEN NN10 6GL ENGLAND Representat.
P75618uk •F5D8632-4 © 2008 Belkin International, Inc. All rights reserved. All trade names are registered trademarks of respective manufacturers listed. Mac, Mac OS, Apple, and AirPort are trademarks of Apple Inc., registered in the U.S. and other countries.
デバイスBelkin N1の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Belkin N1をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはBelkin N1の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Belkin N1の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Belkin N1で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Belkin N1を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はBelkin N1の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Belkin N1に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちBelkin N1デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。