WestinghouseメーカーLD-268 SERIESの使用説明書/サービス説明書
ページ先へ移動 of 59
.
.
T ABLE OF CONTENTS i English T ABLE OF CONTENTS TABLE OF CONTENTS .................................................... i DIGITAL TELEVISION TRANSITION NOTICE .................. 1 AVISO RELATIVO A LA TRANSICIÓN A TELEVISIÓN DIGITAL ..................
T ABLE OF CONTENTS ii English CABLE TV (CTV/DTV) CONNECTION ....................... 1 7 EXTERNAL DEVICE CONNECTIONS ............................ 1 8 POWER CONNECTION ................................................ 2 0 CONNECTING AC POWER ............
DIGIT AL TELEVISION TR ANSITION NOTICE 1 English DIGIT AL TELEVISION TRANSITION NOTICE This device contains a digi tal television tuner , so it should receive di gital over the air TV programming, with a suitable anten na, after the end of full-power analog TV broadcasting in the United S tates on June 12, 2009.
IMPORT ANT INFORMA TION 2 English IMPORT ANT INFORMA TION War ni ng s T o reduce the risk of fire or electric shock: • Do not expose this product to rain or moisture. • Do not remove the rear cover. Ther e are no user-servic eable parts inside. Refer all servicing requirements to qualified service personnel.
IMPORT ANT INFORMA TION 3 English NOTICES Important Notices Concerning Power Cord Selection The specific power cord for this LED TV is enclosed and has been selected according to the country of destination. Use the enclosed po wer cord to prevent electric shock.
IMPORT ANT INFORMA TION 4 English FCC COMPLIANCE ST A TEMENT This equipment has been tested and complies with the limits for a Class B digital device, pursuant to part 15 of the FCC Ru les. These limits are designed to provide reasonable protection against ha rmful interference in a residential in stallation.
IMPORT ANT INFORMA TION 5 English IMPORT ANT SAFETY INSTR UCTIONS Make sure to note and follow all warnin gs and instructions marked on the LED TV . Observe the following sa fety instructions. • Read these instructions. • Keep these instructions. • Heed all warnings.
IMPORT ANT INFORMA TION 6 English Circuit Overload Do not overload wall outlets, exten sion cords, or power strips. This can result in a fire or electronic shock. Po wer Cord Pr otection Power supply cords should be routed so that they are not likel y to be walked on or pinched by items placed upon or agai nst t hem.
IMPORT ANT INFORMA TION 7 English WARNINGS AND PRECA UTIONS • Do not orient the LED TV towards direct sunlight to reduce glare. • If the LED TV will not be used for a lo ng period of time, unplug the unit and remove the batteries from the remote control.
IMPORT ANT INFORMA TION 8 English ANTENNA INST ALLA TION SAFETY Out door Antenna Grounding If an outside antenna or cable system is connected to the LED TV , be sure the antenna or cable system is grounded to pr event vol tage surges and built-up static charges.
IMPORT ANT INFORMA TION 9 English CLEANING THE LED TV T o clean the screen : 1 Wipe the screen with a clean, soft, lint-free clo th. This remov es dust and other parti cl es. 2 If it is still not clean, apply a sma ll amount of non-ammonia, non-alcohol based glass cleaner onto a clean, soft, lint-free cloth, and wipe the screen.
P ACKAGE CONTENTS 10 English P A CKA GE CONTENTS 26 ” LED TV Unit Remote Control (with 2x AAA batteries) LED TV Base User Manual Power Cord W arranty Card AC Adapter Screws for Base Favorite MTS Z Z Z C.
CONTROL P ANEL 11 English CONTROL P ANEL Item Description 1. MENU Displays the LED TV setup screen. 2. V olume +/- • Adjusts the volume during playback. • Selects an item on a menu screen. 3. Channel +/- • Switches the channel during TV viewing.
TERMINALS 12 English TERMINAL S Item Function 1. DC in Connects the AC adapter from this outlet to a power source. 2. TV tuner Connects the LED TV to an antenna or cable service. 3. Composite A V input Connect to an external A V device such as a VCR, DVD player , set-top box, or game system.
REMOTE CONTROL 13 English REMO TE CONTRO L Item Description 1. Mute Mutes the sound. Press aga in to toggle the sound back on. 2. Power T oggles the TV po wer on or off. 3. Backlight Adjusts the LED screen backlight. 4. MTS T oggles t he Multichannel T elevision Sound opti ons.
REMOTE CONTROL OPERA TION 14 English REMO TE CONTROL OPERA TION INST ALLING THE REMOTE CONTROL B A TTERIES 1 Remove the battery cov er . 2 Insert the batteries. Make sure the (+) and (–) marks on the batteries match those inside the compartment. 3 Re-attach the battery cover .
LED TV BASE 15 English LED TV B ASE INST ALLING THE LED TV BASE 1 Open the LED TV carton box. 2 Remove the LED TV base. 3 Remove the plastic bag. 4 Remove the two top carton stabilizers from the LED TV . 5 Remove the protective plastic covering the LED TV .
LED TV BASE 16 English REMO VING THE LED TV BASE If you intend to repack the LED TV unit (for shipping or storage) or you want to change the installation to a wal l mount option, you must first remove the LED TV base. 1 T urn off the LED TV and all co nnected devic es.
ANTENNA CONNECTION 17 English ANTENNA CO NNECTION OUTDOOR ANTENNA CONNECTION CABLE TV (CTV/DTV) CONNECTION The unit has a T V tuner (75 ohm co axial cable connector) located on the rear I/O panel for easy cable hookup. When connecting the 75 ohm coaxial ca ble to the unit, screw the 75 ohm cab le to the TV tun er .
EXTERNAL DEVICE CONNECTIONS 18 English • A position on the RF switch (not supp lied) – You can view all unscrambled channels by using the TV's channel keys. • B position on the RF switch (not s upplied) – You can view the scrambled channels via the converter/descrambler by using the converter's channel keys.
EXTERNAL DEVICE CONNECTIONS 19 English The following diag ram shows the external device con nections. SPDIF L - R Y - L - R VGA AUDIO IN TUNER DC IN HDMI 1 HDMI 2 USB Antenna cable / Cable TV line Antenna / Cable system PC Audio ampl ifier AUDIO OUT AUDIO OUT 3.
POWER CONNECTION 20 English POWER CO NNECTION CONNECTING AC POWER Connect the power cord of the AC adap ter to the LED TV then to a prope r AC outlet. INITIAL SETUP Press on the co ntrol panel or on the remote control to turn on the LED TV . Select the desired language and se lect Ye s to use the SetupWizar d.
BASIC OPERA TIONS 21 English BASIC OPERA TIONS TURNING THE PO WER ON AND OFF T urnin g on the power Press on the contro l panel or on the remo te control to turn on the LED TV . T urning off the power Press on the co ntrol panel or on the remote control to turn off the LED TV .
BASIC OPERA TIONS 22 English CHANGING CHANNELS Follow the instructions bel ow to change channels. Using the Ch / Buttons Browse channels T o browse through the available channels, press Ch / on the remote control or on the control panel.
BASIC OPERA TIONS 23 English Using the Input Key Select source usin g Input Key 1 Press Input . 2 A list of supported video sources is displayed. 3 Press / to select the preferred source. 4 Press to switch to the selected input source. ADJUSTING THE DISPLA Y FORMA T The input source can sometimes affect the way images are displayed on-screen.
SETUP MENUS 24 English SETUP MENUS SETUP MENU OPERA TION Use the setup menus to configure the various op erational settings of the LED TV . Displaying the setup menu screen Press on the remote co ntrol or MENU on the control panel to display the setup menu screen.
SETUP MENUS 25 English PICTURE Use the Picture sub-menus to configure the display quality . Press on the remote control or MENU on the control panel to display the setup menu screen then select Picture to disp lay the Picture sub-menu.
SETUP MENUS 26 English Saturation Use Satura tion to adjust the color inten sity . Adjusting Saturation 1 Use the / keys to select Saturation and press . 2 Press the / keys on the remote control to adjust the saturation level. 3 Press to save and exit the screen.
SETUP MENUS 27 English Adjusting Video Presets 1 Use the / keys to select Video Presets and press . 2 Press the / keys on the remote control to select the desired option. 3 Press to save and exit the screen. Sharpness Use Sharpness to adjust the sharpness or softness of the display .
SETUP MENUS 28 English Adjusting Color T emperature 1 Use the / keys to select Color tempera ture and press . 2 Press the / keys on the remote control to select the desired option. 3 Press to save and exit the screen. Hue Use Hue to adjust the balance of the red, green, and blu e colors in the display .
SETUP MENUS 29 English AUD I O Use the Audio sub-menus to configure the au dio quality . These settings apply to the LED TV speakers only . Any connected audio devices are not affected. Press on the remote control or MENU on the control panel to display the setup menu screen then select Audio to display the Audio sub-menu.
SETUP MENUS 30 English Balance Use Balance to adjust the sound balance between th e L/R speakers. Adjusting Balance 1 Use the / keys to select Balance and press . 2 Press the / keys on the remote control to adjust the balance level. 3 Press to save and exit the screen.
SETUP MENUS 31 English Audio Preset Use this sub-me nu to select one of four pr eset audio options optimized for different sounding conditions. The follo wing optio ns are av ailable: • Rock : Sets the equalizer to the Rock mode. • Pop : Sets the equalizer to the Pop mode.
SETUP MENUS 32 English Adjusting T ruSurround HD 1 Use the / keys to select T ruSurround HD and press . 2 Press the / keys on the remote control to select On or OFF . 3 Press to save and exit the screen. Reset Select Ye s on t his sub-menu to reset all audio-relat ed setting s.
SETUP MENUS 33 English VIEW MODE Use the View Mode sub-menu to select the aspect ratio of the display . Press on the remote control or MENU on the control panel to display the setup menu screen then select Vi e w M o de to display the View Mode sub-menu.
SETUP MENUS 34 English •1 : 1 M o d e : Matches the incoming resolution exactly to the pixels without any scaling. • Standard : Picture is displayed in its original size. • Fill : Picture is displayed to cover the entire screen. H. Position Use this sub-me nu to adjust the horizontal position of the display .
SETUP MENUS 35 English TV PROGRAM Use the TV Program sub-menus to manage the channel list, lang uage sound, and to scan for available TV channels in your area. Press on the remote control or MENU on the control panel to display the setup menu screen then select TV Program to display the TV Program sub-menu.
SETUP MENUS 36 English Channel Edit Use Channel Edit to assign a name to a channel. Editing Channel Names 1 Use the / keys to select Channel Edit and press . The Chann el Name Edit screen appears. 2 Use the / keys to select the desired channel and press to open the Edit Name screen.
SETUP MENUS 37 English MTS Use MTS to select multichannel television sound. The follo wing optio ns are av ailable: • Mono : Allows mono output (useful when stereo is noisy or inconsistent). • Stereo : Allows stereo sound for s uperior TV viewing experience.
SETUP MENUS 38 English Manual Add Use Manual Add to add channels manually . Adding Channels Manually 1 Use the / keys to select Manual Search and press . The Channel Add screen appears. 2 Use the Channel keys on the remote c ontrol to enter the channel number and select Enter .
SETUP MENUS 39 English SETTINGS Use the Settings sub-menus to con figure th e LED TV op erational setup and vie w the current firmware version. Press on the remote control or MENU on the control panel to display the setup menu screen then select Settings to di splay the Settings sub-menu.
SETUP MENUS 40 English Adjusting Date and Time 1 Use the / keys to select Date and Time and press . 2 Use the / keys to select Date or Current Time and press . 3 Use the / keys to select a date or time segment. 4 Use the / keys to a djust the value. 5 Press to save and exit the screen.
SETUP MENUS 41 English • Font: Can be set to As Broadcaster , Style 1 , Style 2 , Style 3 , Style 4 , Style 5 , Style 6 , or Style 7 . • Size: Can be set to As Broadcaster , Small , Medium , or Large . • Font Color: Can be set to As Broadcaster , Black , White , Green , Blue , Red , Cyan , Yellow , or Magenta .
SETUP MENUS 42 English The follo wing optio ns are av ailable: • Rating : Select ON / OFF to hide or display the hidden submenu. • Block Unrated : Select ON/OFF to block/unlock all unrated programs. Adjusting Rating and Block Unrated 1 Use the / keys to select Rating or Block Unrated and press .
SETUP MENUS 43 English Adjusting TV Rating 1 Use the / keys to select TV Rating and press . 2 Use the / / / keys to select the desired rating and press repeatedly to block or unbloc k. Y ou can also select Lock All to block all or Unlock All to unblock all.
SETUP MENUS 44 English Adjusting MP AA Rating 1 Use the / keys to select MP AA Rating and press . 2 Use the / / / keys to select the desired rating and press repeatedly to block or unblock.
SETUP MENUS 45 English 2 Use the / / / keys to select the desired rating and press repeatedly to block or unblock. 3 Press to save and exit the screen.
SETUP MENUS 46 English • Channel Block : Channel Block allows you to block channels. Adjusting Channel Block 1 Use the / keys to select Channel Block and press . 2 Use the / keys to select the desired channel and press repeatedly to block or unblock.
SETUP MENUS 47 English OSD Timeout Use OSD Timeout to adjust the OSD duratio n on the screen: 10 sec, 20 sec, or 30 sec. Adjusting OSD Timeout 1 Use the / keys to select OSD Timeout and press . 2 Press the / keys on the remote control to select 10 sec , 20 sec , or 30 sec .
SETUP MENUS 48 English Power Settings Use this sub-menu to configure powe r-related settings for the LED TV . The follo wing optio ns are av ailable: • VGA port -DPMS : Use this setting to enable or disable VGA port -DPMS. • Backlight : Use this setting to select t he backlight mode: Bright Room, Medium Room, or Dark Room.
SETUP MENUS 49 English Ve r s i o n Use this sub-me nu to view th e LED TV’s serial number and firmware version. V ersion en.
W ALL MOUNT OPTION 50 English WALL MOUNT OPTION The LED TV has been fitted with VESA FP MPMI compliant mounting holes. These 200 x 100 mm mounting holes allow the unit to be mounted on a wal l. Use the four M4 x L10 mm screws to wall mount the LED TV .
TROUBLESHOOTING 51 English TROUBLESHOO TING Problem Corrective Action No power • Make sure the power indicator is illuminated blue. • Make sure the power cord is securely connected to the AC-in jack and is plugged into a functional AC outlet.
TROUBLESHOOTING 52 English No picture or the No Signal message appears when a VGA cable is connected. • Make sure the VGA cable is properly connected to the LED TV’s VGA port. • Decrease the video resolution setting on the computer and try again.
TROUBLESHOOTING 53 English No sound • Make sure the audio input cable is properly connected to the correct terminal, and that the correct input mode is enabled. • The volume may be muted, press or Vol+ key to turn on the volume. • Adjust the Bass, Treble, and Balance settings in Audio menu.
SPECIFICA TIONS 54 English SPECIFICA TIONS Item Specification Model Name LD-268 Series Panel Active Area 576 mm (H) x 324 mm (V) Resolution 1920 (H) x 1080 (V) Brightness (typ) 235 Nits Contrast Ratio (typ) 800:1 Response T ime T R 1.4 ms T F 3.6 ms Aspect Ratio 1.
SPECIFICATIONS 55 English Physical S pecifications Dimensions (WxHxD) With stand: 657 x 472 x 179 mm 25.86 x 18.58 x 7.05 inch Without stand: 657 x 438 x 39.5 mm 25.86 x 17.24 x 1.56 inch Wei gh t ( Ne t ) 4.6 kg Weight (Gross) 6.55 kg NOTES: • The se product specifications are su bjec t to cha nge without user n otification.
デバイスWestinghouse LD-268 SERIESの購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Westinghouse LD-268 SERIESをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはWestinghouse LD-268 SERIESの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Westinghouse LD-268 SERIESの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Westinghouse LD-268 SERIESで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Westinghouse LD-268 SERIESを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はWestinghouse LD-268 SERIESの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Westinghouse LD-268 SERIESに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちWestinghouse LD-268 SERIESデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
