BenQメーカー9H.A1301.7AEの使用説明書/サービス説明書
ページ先へ移動 of 53
We l c o m e E146X Series Digital Camera U ser M anual E146X_UM - EN.book Page i Thursday, April 21, 2011 5:54 PM.
Copyr ig ht Copyright 2011 by BenQ Corporation. All rights reserved. No part of this publication ma y be reprod uced, transmitted, transcribed, stored in a r etrieval system or translated into any lan.
WEEE directiv e Recycling information: See http://www .benq.com/support/recycle for details. CE Regulat or y Notic e This devise is herewith confirmed to comply with the require ments set out in the C.
Safety warning and notice Before operating the camera, p lease make sur e that you read and f ully understand the co ntent in this section. If you ignore and violate all safe ty wa rning notices indicated in this section, the camera warranty may be void.
• If a foreign substance or wat er gets in your ca me ra, please turn the power off immediately an d disconnect the batteries. N ext, remov e the foreign substance or wate r and send it to the maintenanc e cente r .
Do not hold the camera by excessive force. Plus, be sure to protect the camera from strong impacts. To avoid accidental falling, please attach the hand strap to the camera and always hold the camera by keeping the hand strap around your wrist.
Table of Contents Touring the camera ...................................... ............................... .... 1 Checking the package contents ........................................................................ 1 Camera ........................
Smart Scene ......................................................................................... ............ 24 Smile Catch ..................................................................................................... 25 Blink Detector .
Touring the camera 1 English To u r i n g t h e c a m e r a Checking the package cont ents Carefully unpack your kit bo x and ensure that you have the following items. • All pictures, screen captur es, and icons used in this manual are fo r illustration only .
2 Touring the camera English Camera Fr ont vi ew and bottom view Re ar v ie w 1. Shut ter button 2. Power button 3. Flash 4. AF Assist Lamp / Self- timer LED indicator 5. Lens 6. Microphone 7. S peaker 8. T ripod mount 9. USB / A V port 10. Battery/card cover 1.
Preparing the camera for use 3 English Pr eparing the camer a for use Use only the specified battery for the camera , and al ways turn off the camera before removing the battery. Indicator St ate Description S tatus LED No light The digital camera is of f.
4 Preparing the camera for use English Charging the batter y The battery charge status affects the camera performance . To maximi ze the perfor mance and the battery life, fully charge the battery via a wall outlet (or a comp uter), and then fully discharge it through normal use at least once.
Preparing the camera for use 5 English U sing multifunctional buttons You can choose camera se ttings by pressing the 4-way control or the button. 1. Left/Focus : • Scrolls lef t in menus. • T oggles between differen t focus modes. 2. Up : • Scrolls up in menus.
6 Preparing the camera for use English U sing an SD card The camera comes with i nternal memory for st oring captured images, video clips, or audio files. You can also add an SD card to store more files. Before initial use of an SD card, please format th e card first by p ressing > > Manage Memory > / > Format > > Ye s .
Initial setting 7 English Initial setting You will be prompted to set up the lang uage and the date and time when the camera is turned on for the first time. Setting language Selects the language version shown on the screen. T o select a langu age: 1.
8 Operating t he camera English Oper ating the camera The procedure below is a general guideline for basi c operation. It is part icularly useful if you are new to the camera.
Capture mode 9 English Capture mode Item Description Page reference 1 Shooting mode 16 2 Flash mode 1 1 3 Focus mode 12 4 Drive mode 22 5A E B 2 2 6 Number of shots available -- 7 Image size 12 8 Imag.
10 Capture mode English M ore capture options in the Function menu Press the Function button to access more capture options. Depending on your settings, the displayed option icon s in the Function menu may vary. T o use the F unction menu: 1. Press to enter the Function menu, the current ly selected settings are shown.
Capture mode 11 English Flash mode The flash offers additional light source (usua lly used in a l ow-ligh t environment). You can capture an image using one of the following flash modes. T o select a flash m ode: 1. Go to the Capture mode. 2. Keep pressing to toggle among dif ferent flash modes and select a desired option.
12 Capture mode English Foc u s mo d e T o select the fo cus mode: 1. Go to the Capture mode. 2. Keep pressing to toggle between Auto focus and focus modes. Image size T o select an image size: 1. Press > Resolution . 2. Press or to select a setting.
Capture mode 13 English T o select an imag e quality level: 1. Press > Image Qu ality . 2. Press or to select a setting. 3. Press to confirm setting.
14 Capture mode English 2. Press or to select a white balance option. The preview result based on the currently selected white balance is shown in the middle th umbnail.
Capture mode 15 English Effect Adds color filter effects to the image or video you want to capture. Icon Mode Description Normal No effect s are added. LOMO (For Movie Record only) Creates a lomo-li ke effect by adding over sat urated colors, dark corners, and so on.
16 Capture mode English T o select an eff ect: 1. Press > Effect . 2. Press or to select an Effect option. The previe w result based on the currently selected eff ect is shown in the middle thumbnail. 3. Press to confirm setting. Shooting mode Select one of the following shooting mo des to fit your shooting condition.
Capture mode 17 English Shutter Priority Y ou can choose a shutter speed, while the aperture value is automatical ly determined by the lighting condition of the subject. Manual Lets you set both apertur e and shutter speed manually . Smile Catch Automatically takes a shot when a smile is detected.
18 Capture mode English Night Scene Captures photos in a low-light environment, such as in the evening or at night. Night Portrait S hoots night scenes and portra its clearly . Please keep the camera steady or use a tripod while using this mode. Self Portrait T akes a self portrait with at least one face in a confined area.
Capture mode 19 English Snow Used under a very bright light environment su ch as snow scenes. Fireworks Adds exposure time to shoot firework trails. Please keep the camera steady or use a tripod while using this mode. Building Enhances lines & contra cts to highlight t he sense of the three dimensions (3D) for a building.
20 Capture mode English ISO, Metering, and White Balance are not av ailable in some shooting modes like Auto Mode. Y ou must select anothe r mode like Manual to enable these options. Party Captures the p arty atmosphere usually under indoor light sour ce.
Capture mode 21 English T o select a sh ooting mode: 1. Press > > Shooting Mode > . 2. The currently selected shooting mode shows. Press or to locate another desired option. When you are selecting from diffe rent shooting modes, slide to for detailed explanation of each shooti ng mode.
22 Capture mode English 3. Press / to adjust the aperture value, or / to adjust the shutter speed. 4. Press to confirm setting. When toggling between A v/Tv , press the shutter halfway for exposure metering. Drive mode T o select a drive mode: 1. Go to the Capture mode.
Capture mode 23 English AF area T o select an aut omatic focus area: 1. Press > > AF Area . 2. Press or , and then select a focusing area. 3. Press > . AF Assist Lamp This function emits red ligh t allowing the camera to focus easil y when the Shutter butt on is half pressed.
24 Capture mode English T o select a digital zoom: 1. Press > > Digit al Zoom . 2. Press or , and then select a digital zoom type or . 3. Press > . Date Stamp Imprints the date when a picture was taken on the picture itself. T o set the da te stamp: 1.
Capture mode 25 English Smil e Ca tch Captures an image when the subject smiles. 1. Press > > Shooting Mode and select Smile Catch . 2. The camera is tracking the face of your subject (a whit e frame shows). 3. Once a smile is detected, the camera inst antly takes a picture.
26 Capture mode English 3. Press the shutter to capture the first shot. 4. A guidance bar appears on top of the screen. The screen icon indicates the location of the current screen. Pan the camera following the guidance arrow . 5. Once the screen icon overlaps the green block, the camera will automatically t ake the second shot.
Capture mode 27 English 6. T o take the third shot, pan the camera to the direction of the guidance ar row . Once the screen icon overlaps the green bl ock, the camera will automatically take the third shot. LO M O Creates a lomo-like effect by adding over saturated co lors, dark corners, and so on.
28 Capture mode English Pr e-c omposition Captures the background first for positioning the final image. Ideal for asking others to take your photo. 1. Press > > Shooting Mode and select Pre-composition . 2. Press the shutter to capture the background.
Capture mode 29 English 3. Press the shutter to take one picture. 4. If you are satisfie d with the picture , press to take the next one. (If you wan t to re-take the previous picture, press and repeat S tep 3.) 5. Once you have finished taking all pictures, the camera will automatically combine the se images into one.
30 Other settings English T o select a Movie Re cord option: 1. Slide the mode swit ch to and enter the Movie Record mode. 2. Press , and then select an option. 3. Press or to select a setting. 4. Press to confirm setting. Battery status Other settings Press > , and then select an option.
Other settings 31 English Power S aving [1 min.] For power conservation, t he camera automatica lly enters the standby mode af ter it has been idle for a period of time. (Press any key to resume.) [3 min.] [5 min.] [Off] The camera remains on when idle.
32 Other settings English Reset All Resets the ent ire menu and button operation settings to ini tial default. The following settings do not ch ange after Reset All: Date & Time setting Language setting TV Format setting E146X_UM - EN.
Playback mode 3 3 English Pla yback mode Slide the mode switch to to enter the Playback mode. While pausing video playback, you can press t he shutter to capture the video frame as a still image in the VGA format. Item Description Page reference 1 Indicates that the camera is in the Playback mode .
34 Playback mode English Options for playback and editing When the camera is in the Playback mode, press , or to move to different files. You can also select any of the following opti ons. Enlarging an image Magnifies an image, so more details can be seen.
Playback mode 3 5 English Playing back video clips View recorded video clips in the playbac k mode. T o view a video clip: 1. Slide the mode switch to . 2. Press or to move to the video clip you want to view . 3. S tart playing back. • Press to start playing the video clip.
36 Playback mode English • Applies a transition ef fect from upper-left side to lower- right side. • Applies a horizontal transit ion effect. • Applies a vertical transition ef fect. • Applies a horizontal tr ansition effect by inte rsecting an image.
Playback mode 3 7 English Y ou canno t use this fu nction on i mages ca ptured in Panorama m ode. V oice memo Inserts a voice annotation to an image file. T o record a voice me mo: 1. Slide the mode switch to . 2. Press or to move to the image you want to add a voice memo.
38 Playback mode English 4. Press , or to select the effect. The preview result based on the currently selected effect is shown in the middle thumbnail. 5. Press to confirm the change and save the image file. Y ou cannot use this function on im ages captured in Pano rama mode.
Playback mode 3 9 English Y ou cannot resi ze images in the size of 3:2, 16:9, or VGA, or i mages captured in Panorama mode. Startup image Sets the welcome screen when the camera is powering on . T o select a startup image: 1. Press > > Startup Image > or .
40 Working with computer and AV system English W orking w ith comput er and A V system Bundled software The camera offers the followi ng programs on a CD.
Working with computer and AV system 41 English Printing with PictBr idge You can directly print images by con nectin g your camera to a PictBridge-compatible printer without using a computer. T o print image s from a PictBridge-com patible printer: 1.
42 Troubleshooting and service information English T roubleshooting and ser v ice informat ion If your camera cannot operate normally, see the frequently encountered problems and solutions listed below. If the problem pers ists, contact your nearest service center or technical support.
Troubleshooting and service informatio n 43 English T echnical support For technical assistanc e, free driver updates, product information, and news rel eases, visit the following web site: http://www.BenQ.com The camera does not shoot even when pressing the shutter button.
44 Specifications English Specifications Sensor Panasonic 14 Mega Pixels, 1/2.3 inch CCD Zoom Optical: 4X Digital: Up to 4X (Preview) / Up to 12X (Playback) Lens f = 4.8 (W) ~ 19.2 (T) mm F= 2.9 (W) ~ 6.5 (T) f = 27 mm ~ 108 mm, 35 mm equivalent Focus Range Normal: W = 10 cm ~ Infin ity T = 60 cm ~ Infinity Super Macro: 5 cm LCD 2.
Specifications 45 English All information, designs, and specifi cations are subject to change without prior notice. Accessories USB Cable / Software & User Manual CD / User Manual or Quick Guide /.
デバイスBenQ 9H.A1301.7AEの購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
BenQ 9H.A1301.7AEをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはBenQ 9H.A1301.7AEの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。BenQ 9H.A1301.7AEの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。BenQ 9H.A1301.7AEで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
BenQ 9H.A1301.7AEを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はBenQ 9H.A1301.7AEの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、BenQ 9H.A1301.7AEに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちBenQ 9H.A1301.7AEデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。