BenQメーカーP330の使用説明書/サービス説明書
ページ先へ移動 of 59
Welcom e Joybee P 330 Digital Audio Player User.s Manual.
Welcom e Copyright All rights reserved. No part of this publication may be reproduced, transmitted, recorded,stored in a retrieval system, or translated into any language or computer language, in any form or by a ny means, electronic or mechanical, recording, photocopying, or otherwise,without the prior written permission of the BenQ Corporation.
3 Important information FCC compliance This device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference to radio or television reception.
4 handed over to the applicable take - back scheme for the recycling of electrical and electronic equipment. By ensuring this product is disposed on correctly, you will help prevent potential negati ve consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product.
5 Force shutting down the Player …………………………… ..13 Using Joybee P330 as digital audio Player ………………… ..14 Playing the music files ………………………………… .. … ..14 Using the recording functions ………………… .
6.
7 Precautions u Do not place the Player in places with too high/ low temperature or damp. u Do not let any object drop or impact onto the Player. u Avoid using the Player in places with too much dust or soot. u Do not use chemicals such as alcohol and benzene attenuant .
8 BenQ Joybee P330 Digital Audio Player Introduction Thank yo u for purchasing the BenQ Joybee P330 Digital Audio Player. In this manual, you will find all the information about your player, including instructions . Please read this manual carefully in order to make the best use of your player.
9 Package contents Please check the contents of the packaging. Should any part be missing or damaged, please contact your dealer immediately The parts illustrated may differ slightly in appearance from those supplied.
10 Gettin g to know your Joybee P330 Digital Audio Player .
11 Key definition PLAY : Turn On, Turn Off, Play, Pause, and Stop. MODE: Switching Working Mode, Menu Options, Interf ace Switching. NEXT : Move to Right, Forward LAST : Move to Left, Backward VOL.
12 The Joybee N200 Digital Audio Player menu map Main menu PIC Play REC Voi ce REC Video Music FM E - Book Setting C.
13 Getting Started Charging the player The player offers about 2 0 hours of continuous MP3 playtime when the battery is new and fully charged. The exact playtime is subject to battery age and condition, and the format of the files bein g played.
14 Turning the player on and off ・ To turn on th e player, press and hold play key for 3 seconds when the power key is on . The player enters the last mode when it was turned off.
15 Using BenQ Joybee P330 as digital audio player Playing the music files Select t he “ Music ” in the main menu, enter the music files playback interface. The Musical File Playback function realize the playback of musical files in MP3 and WMA formats along with the features of repeating, following and contrasting.
16 represents that the current song has its lyric. “ M y Heart Will Go On ” is the name of the song. If the song does not hav e a Tag, then its file name will be displayed here. “Celine Dion” is the name of the singer. Button Function in the Stop Interface l Long - Press of MODE: Enter into the main menu.
17 In this interface, press MODE to enter into the Deleting Ways selection interface. Button Function in the Deleting Interface l Long - Press of PLAY: Turn the player off. l Short - Press of PLAY: Return to the Stop Interface. l Short - Press of A - B: Switch to the recording interface and start recording.
18 next directory one by one. The selection strip scrolls in a way of two lines. l Short - Press or Long - Press of “ Vol+ ” : The selection strip switches to the last directory one by one. The selection strip scrolls in a way of two lines. l A short - pres s of MODE will select the directory and return to the Stop interface.
19 l Short - Press of A - B: Enter into the Repeat interface and confirm the A point. One more short - press of A - B will confirm the B point and start repeating the segment between A and B. Playing M enu Interface Note: This interface provides the user with the following options: ① Repeat : To set the ways for playing songs.
20 C urrent directory, it will continue to play the songs in the next directory . Repeat One: Repeat playing the current song. Play Folder : The player will stop if it finishes playing the songs in the current directory. Repeat Folder : Repeat playing the songs in the directory.
21 Manual Repeat Operation When yo u enter Manual Repeat, the “ A ” in will flash. u A short - press of NEXT or A - B will set the “ A ” point, and then “B” will flash. u A short - press of NEXT or A - B will set the “B” point. Then the segment between “ A ” and “B” will play repeatedly.
22 ③ In all the steps above, a short - press of PLAY will quit the Repeat interface and the Playing interface, and return to the Stop interface. Auto Repeat Operation u When you enter Auto Repeat, the “ A ” in will flash. u A short - press of NEX T/ A - B will set the “ A ” point, and then “B” will flash.
23 ③ In all the steps above, a short - press of PLAY will quit the Repeat interface and the Playing interface, and return to the Stop interface. Tempo rate Setting Interface Note: You can set the current playing speed in here. This will affect the playing of musical files in the MP3 format.
24 Lyrics Show Interface Note: When you enter into the Lyrics Show interface, the current song continue to play and the corresponding lyrics will display according to th e playing progress of the song. When the playing of the song is over, the player will run the subsequent song playing functions according to the Playing mode set.
25 lines. Each line has 7 Chinese characters. n When the song is playing, its lyrics will be highlighted, and the next sentence of the lyrics will wait in the other part. The waiting lyrics will be highlighted when its time comes. The next sentence will be displayed in the part where the last sentence has finished its presence.
26 Using the recording functions Select the “ Voice REC ” in the main menu, enter the recorder interface. In this interface, it r ealize recording sound files of WAV and ACT format. It has the following interf aces: s top, r ecording, p ause and d irectory s election.
27 The Stop Menu Interface Note: You can select Local folder , REC Types and Exit in here. When you enter into this interface, the enabled position is the o ne where you quit last time. Local folder Selection Interface Note: Here, you can select any directory as your current recording directory.
28 The Recording Interface Note: When you enter into the Recording interface, a new recording file will be generated, and the recording will start in a current coding ways. The scrolling bar indicates that the player is in recording. It al so indicates the progress of the current recording.
29 will be saved, and then the player will return to the Stop interface. The Pause Interface When you enter into the Pause interface, the Pause status will be displayed and user ’ s operations are wanted. In this case, 00:00:03 will flash at the rate of once per second.
30 Playing the recorded files Select the “ Play REC ” in the main menu, enter the inter face of playing the recorded files. Realize the playback of *.WAV and *.ACT files. It has the following interfaces: Playing, Local folder Selection, Dele te , as well as function selection and settings interfaces.
31 l Short - Press of LAST: To switch to the last recorded file in the current directory and reset the time point to zero. l Long - Press of LAST: To cycle to the last recorded files and reset the time point to zero. l Short - Press of NEXT: To switch to the next recorded file in the current direct ory and reset the time point to zero.
32 one by one. The selection strip scrolls in a way of two lines. l Short - Press of MODE: To select the selection strip and return to the Stop interface. When you switch to a new directory, the resume playing memory will be cleared. l Short - Press of PLAY: To quit to the Stop Interface.
33 The “REC01 2004/01/01 10:23” is scrolling hori zontally when the file is playing, Button Function in the Playing interface l Short - Press of MODE: To enter into the Playing menu interface. l Short - Press of PLAY: To enter into the Stop Interface.
34 Note: You can select Repeat Mode for playing songs in here. The music is still playing. It is the same as the interface when playing music. Repeat Interface Note: You can perform the repeat function here. Repeat Operation u When you enter the Repeat functi on, the “ A ” in will flash.
35 Liste ning to FM radio Select the “ FM ” in the main menu, enter the FM interface. Each time when you enter into this function, you are in the playing mode. You need to restore the current prestored radio stations to play. The first time you enter this function th e frequency of the current radio station is the minimum one.
36 play its program. If its frequency is the same as the one prestored, then its channel number will display. A short - press o f LAST will move the frequency backward at a step of 100KHz for fine - tuning. u Short - Press of “ Vol+ ” or ” Vol - ” will adjust the volume.
37 l Long REC: To record the radio progra m you are now listening in act format . l Exi t: To quit the menu. Sav e Note: Save the frequency to a new preset channel number. If the frequency is just the saved one that is fine tuned, then it will be saved to the current channel number.
38 Browsing the JPEG/BMP/GIF pictures Select the “ PIC ” in the main menu, enter the picture browsing interface. Realize viewing of JPEG, BMP, GIF pictures. Common formats are supported. File Selection Status A press of Play will enter into the Picture Playing status.
39 Playing the AMV files Select the “ Video ” in the main menu, enter the interface of playing AMV files. The *.AMV files could be playback in this function(the *.AMV files can be convert ed by using the software which in the CD). Button Function l Short - Press of MODE: Enter into the Playing menu interface.
40 Browsing the E - book Select the “ E - Book ” in the main menu, enter the interface of viewing txt files. File Selection Status When you enter from the main menu, you are at the fi le selection status. Press the PLAY button, begin to read the selected text file.
41 u A short - p ress “ LAST ” or “ NEXT ” to select the last page/next page u A short – press of Play will return to the File Selection status.
42 System setup Note: This is mainly used for the setting of system - related parameter and status display. These settings include: Clock , LCD Set, Language, Power off , Replay Mode , Memory Info , Firmware Ver sion , Firmware Upgrade and Exit Menu.
43 recording. The Setting Procedure u 2003 flashes(2HZ) u Hold - on of NEXT will increase the year number step by step. u Hold - on of Last will decrease the year number step by step.
44 Power off Button Function l A short - press of “ Vol - “ or “ Vol+ ” will switch between the two modes. l A short - press of MOD E will select and enter the Energy Saving Mode or Sleeping Mode. l A short - press of PLAY will cancel the setting and quit.
45 Rep lay Note: In here, you can set the working status for the repeat function. One is Manual, the o ther is Auto. It is the same as the Power o ff Setting interface. Button Function l A short - press of “ Vol - “ or ” Vol+ ” will switch between the two modes.
46 Using BenQ Joybee P330 as a flash disk Realize the standard USB DISK functions. Except the UPGRADE module, in other status, when inserted into the USB Port, the player will enter into the Udisk function. Interface Display There are three status: Ready, Download and U pload.
47 u In Ready m ode, a short - press of MODE will switch to the MUSIC mode. u Short - Press of A - B: Switch to the recording function and start recording. Ejection When PC is ejected (without pulling out the player from the PC), the player will go into the main menu automatic ally.
48 Advanced operation BenQ Joybee P330 Notice: Before install the software, be sure of that the Media Player9(or above) and the DirectX9 have been installed in your PC. After the installation, you can find the program in the “ start ” : AMV Convert Tool ： It could convert the other video formats to .
49 Click the button of ① , select the files which need to be converted; click the button of ② , select the path of the .amv files(you could not change the name of the file) Click the button of ③ , select the settings of the file which will be converted.
50 You can select: Fram es per second of the AMV files: “ low 、 middle 、 high ” After finishing the settings, click the “ OK ” button, it will return the main figure.
51 When the work finished, the figure will be shown as below: Click the “ OK ” button, the conversion will be finished. You can find the .amv files in the path you have appointed.
52 About the formats: If your Media Player co uld not playback the source video(click the button of ④ in the main figure , it could not playback normally) , you should install the more decoders, or the software will not work successfully.
53 Connect the MP3 player to the PC, enter the firmware upgrade interface, then click the program “ MP3 Player Upgrade Tool ” . Click the “ Selec t new firmware file ” to select the firmware you need, then click the “ Begin upgrade ” button.
54 The tool is designed for fo rmat conversion from rcd/rec/act to WAV for recording files , with the function of files playback in WAV, MP3 format files included.
55 Troubleshooting 1. Push the play for 3 seconds, there is no display on the screen. Please check the following: The battery is no power left, or the ON/OFF switch is not put on the “ ON ” position. 2 . The mess timing display on the screen when playbacking some songs.
56 relevant software to recompress the song ’ s file into a standard one. Remark: To confirm the song ’ s file , you can connect the MP3 player to PC, to check the file information by the playback tool in the computer (e.g: Winamp) 5 . No sound when playing a file.
57 format) 10 . Why my PC can ’ t use the Video converting software installed in the player? Please check the following: If your computer is installed “ Windows 20 00 ” , please install the “ DirectX9 ” software, which you may find in the CD we attached in the accessories .
58 <Memo>.
59.
デバイスBenQ P330の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
BenQ P330をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはBenQ P330の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。BenQ P330の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。BenQ P330で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
BenQ P330を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はBenQ P330の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、BenQ P330に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちBenQ P330デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
