AcerメーカーXD1250D seriesの使用説明書/サービス説明書
ページ先へ移動 of 45
Manual for Acer Projector XD1150/XD1150D/ XD1250/XD1250D series.
Dispos al ins tr uctions Do not throw this electronic device into the trash when discarding. T o minimize pollution and ensure utmost protection of the global environment, please re- cycle it.
1 ... English Table of Contents T able of Contents ......................................................................................... 1 Usage Notice ...............................................................................................
2 English ... Usage Notice P recau t i ons Follow all warnings, precautions and maintenance as recommended in this user’s guide to maximize the life of your unit. W a r n i ng- Do not look i nto t he proj ec tor ’ s le n s when t he la mp is on. T he b rig ht lig ht may hur t your e yes.
3 ... English Usage Notice Do: Turn off the product before cleaning. Use a soft cloth moistened with mild detergent to clean the display housing. Disconnect the power plug from AC outlet if the product is not being used for a long period of time.
4 English ... Introduction Product Features This product is an XGA(XD1250/XD1250D)/ SVGA(XD1150/XD1150D) single chip 0.55” DLP ® projec- tor. Outstanding features include: True XGA, 1024 x 768 addressable pixels (for XD1250/ XD1250D) True SVGA, 800 x 600 addressable pixels (for XD1150/ XD1150D) Single chip DLP ® technology NTSC3.
5 ... English Introduction Package Overview This projector comes with all the items shown below. Check to make sure your unit is complete. Contact your dealer immediately if anything is missing.
6 English ... Introduction Two remote control receiver provided at front panel and front-top cover. Main Unit Product Overview 1. Focus Ring 2. Zoom Ring 3. Remote Control Receivers 4. Zoom Lens 5. Elevator Foot 6. Elevator Button 7. Power Socket 8.
7 ... English Introduction Control Panel 1. Temp Indicator LED 2. Lamp Indicator LED 3. Power and Indicator LED (Power LED) 4. Source 5. Resync 6. Menu 7.
8 English ... Introduction Connection Ports 1. DVI Input Connector (for Digital signal with HDCP function) (*) 2. VGA Input Connector (PC Analog Signal/HDTV/Component Video) 3. Audio Input Connector (*) 4. S-Video Input Connector 5. Composite Video Input Connector 6.
9 ... English Introduction 1. Power 2. Resync 3. Source 4. Freeze 5. Hide 6. Aspect Ratio 7. Mute (*) 8. Four Directional Select Keys 9. Back 10. Keystone +/- 11. Menu 12. Volume +/- (*) 13. Page Up/Page Down Remote Control 14. Empowering Key 15. VGA 16.
Installation 10 English ... Connecting the Projector 1. .................................................................................................................... Power Cord 2. ................................................................
Installation 1 1 ... English Powering On/Off the Projector Power Powering On the Projector 1. Remove the lens cap. 2. Ensure that the power cord and signal cable are securely connected. The Power LED will fl ash red . 3. Turn on the lamp by pressing “Power” button on the control panel.
Installation 12 English ... Warning Indicator When the “ LAMP ” indicator lights solid red, the projector will automatically shut itself down. Please contact your local reseller or service center. When the “ TEMP ” indicator lights solid red for about 20 sec- onds, it indicates the projector has been overheated.
Installation 13 ... English Adjusting the Projected Image Adjusting the Projector Image Height The projector is equipped with an elevator foot for ad- justing the image height.
Installation 14 English ... This graph is for user’s reference only. Scree n (Diagonal) Max. 25.41 ”(64.5cm) 76.23 ”(193.6cm) 127.05 ”(322.7cm) 177.87 ”(451.8cm) 254.10 ”(645.4cm) 30 4.93 ”(774.5cm) Min. 23.10 ”(58.7cm) 69.33 ”(176.
User Controls 15 ... English Control Panel & Remote Control There are two ways for you to control the functions: Re- mote Control and Control Panel. Control Panel Using the Control Panel Power Refer to the “Power On/Off the Projector” section on pages 11-12.
User Controls 16 English ... Using the Remote Control Power Refer to the “Power On/Off the Projector” section on pages 11-12 Resync Automatically synchronizes the projector to the input source. Source Press “Source” to choose RGB, Component-p, Component-i, S-Video, Composite Video and HDTV sources.
User Controls 17 ... English Empowering Key Acer Empowering Key provides three Acer unique functions, they are “ Acer eView Management ” , “ Acer eTimer Management ” and “ Acer eOpening Management ” respectively. Press “ e ” key for more than one second to launch the on screen display main menu to modify its function.
User Controls 18 English ... VGA Press “VGA” to change source to VGA-In connector. This con- nector supports Analog RGB, YPbPr (480p/576p/720p/1080i), YCbCr (480i/576i) and RGBsync. Component Video Press “Component” to change source to component Video source.
User Controls 19 ... English On Screen Display Menus Main Menu Sub Menu Settings The Projector has multilingual On Screen Display menus that allow you to make image adjustments and change a variety of settings. The projector will automatically detect the source.
User Controls 20 English ... Color (Computer / Video Mode) Display Mode There are many factory prese ts optimized for various types of images. Bright : For brightness optimization. PC : For computer or notebook. Video : For playing video in a bright environment.
User Controls 21 ... English Color (Computer / Video Mode) White Segment Use the white Segment control to set the white peaking level of DMD chip. 0 stands for minimal segment, and 10 stands for maximum seg- ment. If you prefer a stronger image, adjust towards the maximum setting.
User Controls 22 English ... Image (Computer / Video Mode) Keystone Adjust image distortion caused by tilting projection. (±16 degrees) Aspect Ratio Use this function to choose your desired aspect ratio. Auto : Keep the image with original width-higth ratio and maxi- mize the image to fit native horizontal or vertical pixels.
User Controls 23 ... English Image (Computer / Video Mode) “H. Position”, “V. Position”, “Frequency” and “ Tracking” func- tions are not supported under DVI and Video mode. “Sharpness” func- tions is not supported under VGA connector source.
User Controls 24 English ... Auto Shutdown (Minutes) The projector will auto shutdown while there is no signal input after the setting time. Source Lock When source lock is turned off, the projector will search for other signals if the current input signal is lost.
User Controls 25 ... English Acer eOpening Management is a PC utility for user to change the default startup screen of Acer projector to their desired image.
User Controls 26 English ... Management (Computer / Video Mode) Lamp Hour Reset Press the button after choosing “Yes ”to turn the lamp hour counter to 0 hours. Security Press to start “Security” setting. You must enter “Administrator Password” first before Security setting.
User Controls 27 ... English Management (Computer / Video Mode) Once “Security” is set to “On”, administrator can set timeout function. Press or to select timeout duration. The range is from 10 minutes to 990 minutes. When time is up, the projector will request user to enter password again.
User Controls 28 English ... Management (Computer / Video Mode) The projector provide two options of “Security Mode”. Select “Request password only after plugging power cord”, the project will request user to input password only for the first time plugging on power cord of the projector.
User Controls 29 ... English Management (Computer / Video Mode) If administrator forgot “Administrator Password”, do the following to retrieve the “Administrator Password”: 1. Press “MENU” for more than 4 seconds when any of “Enter Password” or “Enter Administrator Password” dialogue is currently displayed.
User Controls 30 English ... Management (Computer / Video Mode) Reset Press the button after choosing “Yes” to return the display pa- rameters on all menus to the factory default settings.
User Controls 31 ... English Audio (Computer / Video Mode) Volume Press the to decrease the volume. Press the to increase the volume. Mute Choose the “On” to turn mute on. Choose the “Off” to turn mute off. Power On/Off Volume Choose this function to adjust volume when power on/off.
User Controls 32 English ... Timer (Computer / Video Mode) Timer Start Press the to start/stop timer. Timer Period Press the to adjust timer period. Timer Volume (*) Choose this function to adjust volume when timer function is enable and time is up. Timer Display Press the to choose timer display mode on the screen.
User Controls 33 ... English Language (Computer / Video Mode) Language Choose the multilingual OSD menu . Use the or key to select your preferred language.
Appendices 34 English ... Troubleshooting If you experience trouble with the projector, refer to the following information. If the problem persists, please contact your local reseller or service center.
Appendices 35 ... English 6. Click on “Show all devices”. Then select “Standard monitor types” under the “Manufacturers” box ; choose the resolution mode you need under the “Models” box. 7. Verify that the resolution setting of the monitor display is less than or equal to 1024 x 768 (XD1250/XD1250D)/800 x 600 (XD1150/XD1150D).
Appendices 36 English ... Problem: The image is outstretched when displaying 16:9 DVD. The projector automatically detects 16:9 DVD and adjusts the aspect ratio by digitizing to full screen with 4:3 default set- ting.
Appendices 37 ... English Problem: Message Reminders “Lamp is approaching the end of its useful life in full power opera- tion. Replacement Suggested!” will be shown about 10 seconds when lamp life is going to deplete. “Projector Overheated.
Appendices 38 English ... Replacing the lamp The projector will detect the lamp life itself. It will show you a warning message “Lamp is approaching the end of its useful life in full power operation. Replacement Suggested!” When you see this message, changing the lamp as soon as possible.
Appendices 39 ... English Specifi cations The specs specifi ed below are subject to change without notice. Regarding the fi nal specs, please refer to Acer announced marketing specs.
Appendices 40 English ... Compatibility Modes Mode Resolution (ANALOG) V.Frequency (Hz) H.Frequency (kHz) VESA VGA 640 x 350 70 31.5 VESA VGA 640 x 350 85 37.9 VESA VGA 640 x 400 85 37.9 VESA VGA 640 x 480 60 31.5 VESA VGA 640 x 480 72 37.9 VESA VGA 640 x 480 75 37.
Appendices 41 ... English Regulation & safety notices This appendix lists the general notices of your Acer Projector. FCC notice This device has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC rules.
Appendices 42 English ... Operation conditions This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. this device may not cause harmful interference, and 2. this device must accept any interference received, in cluding interfer- ence that may cause undesired operation.
Appendices 43 ... English Important safety instructions Read these instructions carefully. Save them for future reference. 1. Follow all warnings and instructions marked on the product. 2. Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners.
デバイスAcer XD1250D seriesの購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Acer XD1250D seriesをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはAcer XD1250D seriesの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Acer XD1250D seriesの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Acer XD1250D seriesで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Acer XD1250D seriesを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はAcer XD1250D seriesの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Acer XD1250D seriesに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちAcer XD1250D seriesデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。