Woods Equipmentメーカー111877の使用説明書/サービス説明書
ページ先へ移動 of 28
I NST AL LA TION MAN U AL SA VE THIS MANU AL! Include it with your Loader Manual. It contains safety , operation, and repair part information not found in other manuals.
2 Introduction LMK (Rev . 7/20/2 007) T O THE DEALER : Assemb ly and prop er installation of this pro duct is the re sponsi bility of the Woods ® dealer .
Safety 3 Loader Mounti ng Kit SR 3 (4/25/200 3) INST ALLA TION This Loader Mounting Ki t is to be used only fo r the loa d ers and tractor s specif ied in this man ual. Any other use or modif ication of this moun ting kit may result in serious injury or death.
4 Mount Installation MAN006 4 (Rev . 7/20/ 2007) LOADER MOUNT INST ALLA TION ■ Only use 1 1 1877 Loader Mounting Kit for mounting W oods 1020, 1027, LU126 loaders on Ford New Holla nd 2000, 2310, 2600, 26 10, 2810 , 2910, 3000 , 3600, 3 610, 391 0, 4000SU, 4 100, 4600SU, and 4610SU tractor s.
Mount Inst allation 5 MAN0064 (Rev . 7/20/2007 ) Inst all Right and Lef t Rear Mounts 1. Attach rig ht rear m ount ( 1) to t he trac tor clutc h housing us ing two cap scr ews (12) and ha rdened flat washer s (14) in the top holes and two cap screws ( 16) harden ed flat washers ( 14) in the lower two holes.
6 Mount Installation MAN006 4 (Rev . 7/20/ 2007) Inst all Front Mount 1. Insert f our (two per s ide) carri age bolt s (13) in to upper hol es of front mount prio r to attaching to tractor . Ca rriage bolts shou ld be ins erted from th e ins ide poin ting outwar d.
Mount Inst allation 7 MAN0064 (Rev . 7/20/2007 ) Inst all Grill Guard (Optional) Attach g rill guar d (21) t o fro nt mount ( 3) us ing four (two per side) cap scre w (23), lock washe rs (25), hardened flat wa shers (24 ) and hex nuts (22) . T orque hardware to: .
8 Mount Installation MAN006 4 (Rev . 7/20/ 2007) NOTES.
Hydraulic Inst allation 9 MAN0064 (Rev . 7/20/2007 ) HOSE KIT INST ALLA TION Keep hands and body away from pres surized lines. Use paper or cardboard, not hands or other body p a rt s to check for lea ks. Wear safety goggles. Hydraulic fluid under pressure can ea sily penetrate skin and will c ause serious injury or death.
10 Hydraulic Inst allation MAN00 64 (Rev . 7/20 /2007) 59723 Hose Ki t Route Hy draulic Hoses Route hoses along loade r mount , under the right s ide of the oper ator ’s plat form, a nd over the rear ax le. Be sure to avoi d contact wit h 3-point link age, brak e pedals, a nd othe r moveab le trac tor comp onents.
Hydraulic Inst allation 11 MAN0064 (Rev . 7/20/2007 ) 57923 Hose Ki t V e rify Control Movement s 1. Mount loader to tractor: Remove m ount pi ns from loa der uprigh ts. Align tr actor with l oader an d slowly drive trac tor into loader . S hut off tractor .
12 Hydraulic Inst allation MAN00 64 (Rev . 7/20 /2007) 1001420 HOSE KIT General De scripti o n These set-up i nstruct ions are for o perating the 1020/1027 l oader usi ng a single- lever control mounted on the right load er upright as shown Figur e 13.
Hydraulic Inst allation 13 MAN0064 (Rev . 7/20/2007 ) 100142 0 Hose Kit Inst all Hoses 1. Attach 90° end of h oses (7) to the IN, OUT and PBY por ts of the load er contr ol valve. 2. Locate the fi ll plug on the to p of right rear ax le and remo ve. 3.
14 Hydraulic Inst allation MAN00 64 (Rev . 7/20 /2007) 100142 0 Hose Kit Inst all Hose Hanger 1. Install hose hanger br acket (8 ) under pl atform between brake peda ls an d chassis as show n in Figure 17 . 2. Secu re with hex he ad cap scr ew (10), fla t washers ( 1 1), a nd lock nut (12).
Hydraulic Inst allation 15 MAN0064 (Rev . 7/20/2007 ) 100142 0 Hose Kit V e rify Control Movement s 1. Mount loader to tractor: Remove m ount pi ns from loa der uprigh ts. Align tr actor with l oader an d slowly drive trac tor into loader . S hut off tractor .
16 Hydraulic Inst allation MAN00 64 (Rev . 7/20 /2007) 1023582 HOSE KIT General De scripti o n These set up instr uctions are for oper ating the L U126 loader us ing a sing le lev er contro l valve mou nted t o the right loader mo unt brack et as sho wn in F igure 21 .
Hydraulic Inst allation 17 MAN0064 (Rev . 7/20/2007 ) 102358 2 Hose Kit Inst all Hoses 1. Attach s traight e nd of ho ses (1) to th e IN, O UT and PBY ports of the l oader contr ol val ve. 2. Locate the fi ll plug on the to p of right rear ax le and remo ve.
18 Hydraulic Inst allation MAN00 64 (Rev . 7/20 /2007) 102358 2 Hose Kit Connect Loader Feedline Hoses 1. The control valv e kit contains hoses as semble d with quick coupler s. A ttach the h oses to load er feedlines , followi ng the col or pattern. 2.
Hydraulic Inst allation 19 MAN0064 (Rev . 7/20/2007 ) 1023596 HOSE KIT General Des cription These instructi ons are for o perating the L U126 load er using the tractor hydrau lic rem ote co ntrol le ver . T o use this hydr aulic c onnectio n, the tracto r must be equipped with fou r tracto r hydraul ic coup lers.
20 Hydraulic Inst allation MAN00 64 (Rev . 7/20 /2007) 102359 6 Hose Kit V e rify Control Movement s 1. Mount loader to tractor: Remove m ount pi ns from loa der uprigh ts. Align tr actor with l oader an d slowly drive trac tor into loader . S hut off tractor .
Part s 21 MAN006 4 (Rev . 7/20/200 7) 1 1 1877 LOADER MOUNTING KIT R E F P ART QTY DESCRIPTION 1 1026490 1 Right rear mo unt 2 1026491 1 Left rear mo unt 3 1001642 1 Front mo unt 4 1026492 1 Right si .
22 Part s MAN00 64 (Rev . 7/20 /2007) 1001420 HOSE KIT (1020/1 0 27 LO ADERS ) R E F P ART QTY DESCRIPTION A — —— 1 Acc esso ry pla te (t ract or part) 1 316004 2 Elbow , 3/4 JICM x 3/4 OR BM 90.
Part s 23 MAN006 4 (Rev . 7/20/200 7) 1023582 HOSE KIT (LU126 LOADER) R E F P ART QTY DESCRIPTION A ——— 1 Accessory plate (tractor part ) 1 1001422 3 Hose, 86" x 3/4 JICF x 3/4 JICF 2 10014.
24 Part s MAN00 64 (Rev . 7/20 /2007) 57923 HOSE KIT (10120/ 1027 LOADERS) 1023596 HOSE KIT (LU126 LOADER) R E F P ART QTY DESCRIPTION 1 5791 2 4 Hose, 120" x 3/4 JICM x 3 /4 JICM 2 313053 4 Elbo.
Appendix 25 Bolt T orque & Siz e Chart s (Rev . 3/28/2007 ) BOLT T O RQUE CHART Always tighten har dware to these values unles s a different tor que value or tighte ning p rocedure i s list ed for a specifi c applica tion . F ast eners must al wa ys be repla ced with t he sam e grade as sp ecified in the manual par ts list.
26 Appendix Bolt T orque & Size Chart s (Rev . 3/28/2007) BOLT SIZE CHART NOTE: Chart s hows b olt thr ead siz es and c orres ponding he ad (wr ench) sizes f or standa rd SAE and met ric bol ts. ABBREVIATIONS AG ..... ................. ...........
F-3079 (Rev . 3/31/2010) W oods Equipment Company 260 6 South Illinois Route 2 Post Office Box 1000 Oregon, Illi nois 610 61 USA 800-319-663 7 tel 800 -399-66 3 7 f ax www .W oodsEquipmen t.com W ARRANTY All Models Except Mow ’ n Machin e TM Zero-T urn Mowers Plea se Ent er In form atio n Be low and Save fo r Futu re R efer ence .
F-8494 (Rev . 6/23/2005) W ARRANTY (Replacement Parts F or All Models Except Mow’ n Machine TM Zero-T urn Mowers and W oods Boundary TM Utility V ehicles ) W oods Equipm ent Company ( “WOODS”) w.
デバイスWoods Equipment 111877の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Woods Equipment 111877をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはWoods Equipment 111877の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Woods Equipment 111877の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Woods Equipment 111877で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Woods Equipment 111877を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はWoods Equipment 111877の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Woods Equipment 111877に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちWoods Equipment 111877デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。