WoodstockメーカーW1774の使用説明書/サービス説明書
ページ先へ移動 of 20
Phone: (360) 734-3482 • Online Technical Support: tech-support@shopfox.biz COPYRIGHT © JUNE, 2007 BY WOODSTOCK INTERNATIONAL, INC., REVISED DECEMBER, 2007 (JM) WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE OR FORM WITHOUT THE WRITTEN APPROVAL OF WOODSTOCK INTERNATIONAL, INC.
This manual provide s cr itical safety instru ctions on the proper setup , operat ion , maintenan ce , a nd s erv ice o f this machine /equipm ent. F ailure to read , und erst and , an d follow t he inst ruct ions g iven in this manual may result in ser ious per sonal i n jur y , in c ludin g am putatio n , elec trocution, or death.
Model W1774 18 Gauge Brad Nailer -1- SAF E T Y Saf ety Ins tru ctio ns f or P ne um at ic T ools 1. KEEP ALL SAFETY DEVICES IN PLACE and in working order. 2. REMOVE ADJUSTING KEYS AND WRENCHES. Form habit of checking to see that keys and adjusting wrenches are removed from tool before operation.
Model W1774 18 Gauge Brad Nailer -2- 10. USE PROPER AIR HOSE for the tool. Make sure your air hose is in good condition and is long enough to reach your work without stretching. 11. WEAR PROPER APPAREL. Do not wear loose clothing, gloves, neckties, rings, bracelets, or other jewelry which may get caught in moving parts.
Model W1774 18 Gauge Brad Nailer -3- Never point this nailer at yourself or another person! Always pay attention to the direction this nailer is pointed. Use this tool with respect and caution to lessen the possibility of operator or bystander injury.
Model W1774 18 Gauge Brad Nailer -4- No list of safety guidelines can be complete. Every shop environment is different. Always consider safety first, as it applies to your individual working conditions. Use this and other tools with caution and respect.
Model W1774 18 Gauge Brad Nailer -5- The Mo del W1 774 is designe d to be oper ated at 6 0- 1 0 0 P SI using clean , dr y , reg ulated , compre ssed air .
Model W1774 18 Gauge Brad Nailer -6- SETUP In ven t or y This brad nailer h as b een caref ully pack aged for safe transp ort a tion. If you notice the tool has been damaged dur ing shipping, pleas e contact your author ized Shop Fo x dealer immediately .
Model W1774 18 Gauge Brad Nailer -7- Safety Nose A s af ety mechanism on the n ose of the nai ler protects against accid ental firing. When the trigger is pressed, the nail er will not fire until the safety no se mechanism is depresse d.
Model W1774 18 Gauge Brad Nailer -8- OP E R A TI ONS Loa di ng Whe n replac ing nail s in your M odel W1 77 4 , follow these guideline s: Gauge: ........................................ 18 Length: .................................. 5 ⁄ 8 "–2" Capacity: .
Model W1774 18 Gauge Brad Nailer -9- 5. Pull the trigger. — If the nail drove into the wood far enough, continue with your intended operations. — If the nail either went too far or not far enough, then adjust the air pressure. More air pressure will increase nail depth, and less air pressure will decrease nail depth.
Model W1774 18 Gauge Brad Nailer -10- A jamm ed nail must b e cleared before using the nai ler aga in. To clear a jammed nail from the dis- charge area, do these steps: 1. DISCONNECT NAILER FROM THE AIR SUPPLY! 2. Depress the magazine latch and pull back the magazine cover until it stops.
Model W1774 18 Gauge Brad Nailer -11- Re pl aci ng Pi sto ns/ O-Rings Always disconnect nailer from air whenever servicing! During main- tenance, a nailer connected to air may fire accidentally, causing seri- ous personal injury! Under heav y us e , a piston or piston shaft may wear out.
Model W1774 18 Gauge Brad Nailer -12- C LEANIN G & L UB RICA TION C le an in g Use a go od solvent to clean the n ose asse mbly of the nailer . Al ways be sure that th e nailer is dr y before using it again. Do not allow d ust , chips, san d , etc.
Model W1774 18 Gauge Brad Nailer -13- W 1 7 7 4 P ARTS BREAK DO WN .
Model W1774 18 Gauge Brad Nailer -14- W 1 7 7 4 P ARTS L IS T REF PART � # DESCRIPTION REF PART � # DESCRIPTION 101 X1774101 SPECIAL � BOLT 136 X1774136 COMPRESSION � SPRING 102 X1774102 EXHAUST � PORT 137 X1774137 SAFETY � NOSE 103 X1774103 COMPRESSION � SPRING 138 X1774138 DRIVER � GUIDE 104 XPB42M HEX � BOLT � M5-.
Model W1774 18 Gauge Brad Nailer -15- T r o ub l es h oo ti ng Symptom Possible Cause Possible Solution Air leaking at trig ger valve area. 1. O-rings in trigger valve housing are damaged. 1. O-rings must be replaced & operation of safety nose must be checked.
.
CUT ALONG DOTTED LINE Name ___________________________________________________________________________________ Street __________________________________________________________________________________.
TAPE ALONG EDGES--PLEASE DO NOT STAPLE FOLD ALONG DOTTED LINE WOODSTOCK INTERNATIONAL INC. P.O. BOX 2309 BELLINGHAM, WA 98227-2309 Place Stamp Here FOLD ALONG DOTTED LINE.
デバイスWoodstock W1774の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Woodstock W1774をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはWoodstock W1774の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Woodstock W1774の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Woodstock W1774で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Woodstock W1774を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はWoodstock W1774の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Woodstock W1774に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちWoodstock W1774デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。