Yamahaメーカー6Y9-2819U-E0の使用説明書/サービス説明書
ページ先へ移動 of 36
Command Link Plus Multifunction Color Gau g e O W NER’S MAN U AL Read this manual carefully before using the Co mm and Link Plus Mu lt ifunction Col or Gauge.
Read this manual carefu lly before usin g the Command Lin k Plus Multifunct ion Color Gauge. Keep this manual onboard in a waterproof b ag when boati ng. This man ual should stay with the Command Link Plus Mul t ifunction Co lo r Gauge if it is sold. 6Y9_US_E0.
Important manual information T o the owner Thank you for selecting the Command Li nk Plus Multifunction Color Gauge (hereinafter called the Multi-Display).
Safety information Safety inf ormation The Multi-Display will n otify th e operator when engine abnormali ties occur by disp laying a pop-up window and alert icons.
Safety information Maintenance Notifica tions Other Notificat ions Engine trouble ale rt Displayed when the engine mal- functions. Consult a Yamaha dealer. Displayed when scheduled main tenance is overdue. Carry out the maintenance and reset the maintenance schedule .
List of abbreviations List of abbreviations The following are abbreviations displayed on this meter or used in this manual. Abbreviation Description ABYC American Boat and Yacht Council AVAL Available fuel CL Command Link C PORT Center Port side C STBD Center Starboard side ECO, ECON Fuel Economy Eng Engine EUR Europe Ex.
1 Table of contents/Specifications T able of contents Specifications ................ ............. ................ ................ ............ 1 Names and functions of part s ............. ... ... ... ............. ... .... ... .. 2 Initialization .
2 Names and functions of parts Names and functions of parts Name Explanation of function 1 Display Displays engine information, boat/e nvironme nt information, setting menus, and so on.
3 Initialization Initialization The initialization screen is not normall y displaye d, except during installation. TIP: If it does appear, consult a Yamaha dealer. Configuring the number of outboar d motor s 1. Turn the engine switch to “ON.” The initialization screen is displayed.
4 Initialization Configuring fuel tank paramete r s Configuring the tank sensor s 1. Use the directi onal keypad and the “SET” button to display the “Fuel Capacity” in the me nu screen. 2. Use the directional keypad to configure the total fuel capacity on your boat.
5 Initialization Initializ i ng trim angle 4. Use the directi onal keypad to select the sensor from the “Sensor” l ist. 5. Set using the “SET” bu tton. 1. Fully trim the outboard motor down. 2. Use the directi onal keypad and the “SET” button to display the “Trim Level” in the menu screen.
6 Initialization Configuring the depth alarm NO TICE Make sure to con f igure water dep th before turnin g on the depth alarm. 1. Use the directi onal keypad and the “SET” button to display the “Depth Alarms” in the menu screen. 2. Use the directi onal keypad and the “SET” button to select “Threshold Set- ting.
7 Meter display Meter display Main screens The layouts of main screen differ de pending on th e number of outboard moto rs on your boat. Display can be switched between digital and analog displays.
8 Meter display ■ COMBO 1 : Alert display area 2 : Condition display area 3 : Basic display area 4 : Specific selection area Single-engine type T win-, Quadru ple-engi ne type T riple-engine typ e Analog displa y 1 3 4 2 1 3 4 2 1 3 4 2 1 3 4 2 6Y9_US_E0.
9 Meter display ■ ENGINE 1 : Alert display area 2 : Condition display area 3 : Basic display area 4 : Specific selection area T win-, Quadruple-engine types T riple-engine type Analog display 1 3 4 2 1 3 4 2 1 3 4 2 6Y9_US_E0.
10 Meter display ■ BOAT STATS ■ TROLL Digital displa y Analog disp lay Single-engine type T win-, Quadruple-engine types T riple-engine typ e 6Y9_US_E0.
11 Meter display Aler t display Red-colored alert ind icators will be displayed in the alert display area for “Overheat alert,” “Low oil pressure alert,” “Low battery volta ge al ert,” “Water in fuel al ert,” and “Engine trouble alert.
12 Meter display Condition displa y Orange signals are displa yed in the condition display area for “Engine warming up ,” “Engine synchronization controlling,” a nd “Yamaha Security System Y-COP is locked.” W ater in fuel alert NO TICE W ater in fuel can cau se engine malfunction.
13 Meter display Basic displa y “Shift position,” “Tachometer,” and “Trim angl e” are displayed in the basic displa y area. Single-engine typ e T win-engine type T riple-engine typ e 1 : Shift position area 2 : Tachometer area 3 : Trim angle area 1 23 1 23 23 1 23 1 23 1 23 1 6Y9_US_E0.
14 Meter display 1 : Shift position area 2 : Tachometer area 3 : Trim angle area Quadruple -engine ty pe 23 1 23 1 6Y9_US_E0.fm Page 14 Tu esday, March 23, 2010 2:17 PM.
15 Meter display Specific selec tion You can select the followi ng meter displays for display in the speci fic selection area. You can combine the displayed meters and register up to 4 different types of settings.
16 Meter display Fuel economy Sailing dista nce Fuel consumption Total fuel flow PORT fuel flow STBD fuel flow CENTER fuel flow C PORT fuel flow C STBD fuel flow PORT hour meter STBD hour meter CENTER hour meter C PORT hour meter C STBD hour meter Water Depth Water temperature Available fuel 6Y9_US_E0.
17 Meter opera tion Meter operation You can switch main screens to suit your prefere nces. Adjust the trolling engine speed from the main screen. Switching the mete r di sp l ay ■ Switching the main screen Press the “ HJ ” (Left/Right) buttons on the directional keypad to switch the main screen.
18 Meter operation ■ Switching the registered screens Press the “ LI ” (Up/Down) buttons on the directional keypad to select a display from 4 screen types (A, B, C, D). Single-engine typ e Twin-, Triple-, Q uadruple-engine types ■ Customizing the registered screen Use the menu screen to customize the specific selection area.
19 Menu screen Menu screen Operating the me nu scr een You can configure and reset the settings on the menu screen. You can also check information recorded on the outboard motor. 1. Press the “MENU” button. The menu screen is displayed. 2. Use the directional keypad buttons a nd the “SET” button to display the desired menu.
20 Menu screen Menu items and functions ■ Logs Trip • Reset fuel consumption • Reset sailing distance • Reset designated dr iving time Maintenance • Reset time elapsed sin ce pre vious maint.
21 Menu screen Tone • Adjusting button operati on sounds • Changing the Multi-Di splay settings individually/in a batch Display Favorites • Setting displa y fields for ENGINE, BOA T ST A TS and .
22 Menu screen Clock • Time offset setting Units • Changing display units Initial Fuel Capacity • Setting the total vo lume of the fuel tanks connected to the Multi-Displ a y Tank Type • Setti.
23 Menu screen Calibrate Trim Level • Zero-setting the trim angle Fuel Flow • Adjusting the fuel consumption figure ■ Alarms Current • Displays currently occurring aler ts. Fo r fur ther informati on, see pages 11 a nd 12. Trouble Codes • Displays the troub le code and name of the alert.
24 Menu screen ■ Other Views Tanks • Can display the v olume of any tanks . • Each tank type is display ed in a prede- fined color . Fuel tanks : Na vy b lue F resh water tanks: Blue Sew age tank: Orange Generator fuel tank: Green Trim • Displays trim angle as a percentage.
25 Adjusting trolling engine speed Adjusting trolli ng engine speed Adjust the trolling en gine speed using “TRO LL” on th e main screen. You can adjust desig- nated trolling speed in units of 50 r/min. The trolling engine spe ed is synchronized for all en- gines in a multi-engine configuration.
26 Adjusting trollin g engine speed 3. Set the gear shift in the N position , and then press the “CANCEL” bu tton to cancel the trolling mode. “TROLL” on the status bar will switch to “VIEW.
27 Trouble codes T roub le codes Tr o u b l e code Item Cause 13 Pulser Coil Pulser coil ma lfunction 15 Temp Sensor Water temperature sensor malfunction (Thermo sensor malfunction) 19 Battery Voltage.
28 Trouble codes 186-187 Remote Cont rol System Remote control system malfunction (Dig- ital Electronic Control) Tr o u b l e code Item Cause 6Y9_US_E0.
6Y9_US_E0.fm Page 29 Tu esday, March 23, 2010 2:17 PM.
Pri nted in Japan March 20 10 - 0.6 x 2 ABE Y AMAHA M OT O R C O RPOR A T ION, US A Pr in t ed on rec yc led paper 6Y9_US_E0.fm Page 30 Tu esday, March 23, 2010 2:17 PM.
デバイスYamaha 6Y9-2819U-E0の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Yamaha 6Y9-2819U-E0をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはYamaha 6Y9-2819U-E0の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Yamaha 6Y9-2819U-E0の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Yamaha 6Y9-2819U-E0で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Yamaha 6Y9-2819U-E0を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はYamaha 6Y9-2819U-E0の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Yamaha 6Y9-2819U-E0に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちYamaha 6Y9-2819U-E0デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
