Black & DeckerメーカーVEC054Dの使用説明書/サービス説明書
ページ先へ移動 of 15
MAXX SST TM COMP A CT PO WER INVER TER INSTR UCTION MANU AL Thank you for choosing Black & Decker! Go to www .BlackandDecker .com/NewOwner to register your new product Catalog Number VEC054D BEFORE RETURNING THIS PRODUCT FOR ANY REASON PLEASE CALL 1-800-544-6986 BEFORE Y OU CALL, HA VE THE CA T ALOG No , AND D A TE CODE A V AILABLE.
1 GENERAL SAFETY WARNINGS AND INSTRUCTIONS FOR ALL APPLIANCES READ ALL INSTRUCTIONS WARNING: Read all instructions before operating product. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury . • AVOID DANGEROUS ENVIRONMENTS Don’t use appliances in damp or wet locations.
• EXTENSION CORDS. Make sure your extension cord is in good condition. When using an extension cord, be sure to use one heavy enough to carry the current your product will draw. An undersized cord will cause a drop in line voltage resulting in loss of power and overheating.
3 IMPORT ANT CABLE INFORMA TION: Substantial power loss and reduced battery operating time results from inverters installed with cables that are not able to supply full power . Symptoms of low battery power can result from cables that are either excessively long or an insufficient gauge.
• Overload and over -temperature shutdown activated if AC output exceeds rated watts • AC short-circuit shutdown • Low voltage audible alarm (sounds at 10.5 volts input) • Low-voltage shutdown (activates at 10.0 volts DC) • High-input voltage shutdown (activates at above 15.
APPLIANCE PO WER CONSUMPTION MAXX SST™ inverters are ideal for powering: • Lights • TVs and TV/DVD (VCR) combinations units • Radio receivers/transceivers and stereo systems • Computers and .
Appliance Consumption in Amps and Watts Chart (continued) APPLIANCE AMPS@ WA TTS@ 120V AC 120V AC 10-Speed Blender 2.93 352 Belt Sander 3.11 374 3/8" Reversible Drill 3.20 385 Household Food Processor 3.30 396 Computer and Monitor 3.66 440 Portable Vacuum 4.
safely operated. The equipment that needs the highest starting wattage are pumps and compressors that start under load. This equipment can be safely tested. If an overload is detected, the inverters will simply shut down until the overload situation is corrected.
Note: All operating time curves assume permanent installation with the appropriate DC input wire (See the “Specifications” section of this Instruction Manual) and a full charge on the batteries.
3. At least three inches of clearance from other objects is maintained for cooling air flow; 4. The unit is not exposed to direct heat, sunlight or to explosive or flammable fumes; and 5. The unit is as close to the DC power source as possible. Never connect the chassis ground wire from the inverter to the DC negative input.
Permanent Installation For permanent installation to heavy-duty battery power you will need: • T wo cables (as indicated in the “Specifications” section) • T erminals to fit cable ends and stu.
13. Connect the stripped, soldered (longer) end of the positive (+) cable to the red stud marked (+) on the inverter and tighten the retaining nut. 14. Connect the stripped, soldered end of the negative (–) cable to the black stud marked (–) on the inverter and tighten the retaining nut.
TR OUBLESHOO TING Common Audio/Visual Problems Resetting the Unit After over -voltage or thermal automatic shutdown, the VEC054D will reset automatically . T o reset all other units, turn the ON/OFF Power Switch to the “OFF” position, then back “ON.
CARE AND MAINTENANCE Storage 1. Ideal storage temperature range is 50-68°F (10-20°C). 2. Store and use the inverter in a cool, dr y place with adequate ventilation. 3. Avoid locations that are exposed to heating units, radiators, direct sunlight or excessive humidity or dampness.
SPECIFICA TIONS Maximum continuous power: 2000 watts Surge capacity (peak power): 4000 watts Output voltage range: 105-125 volts Output frequency: 58-62 Hz Output voltage: 110/120 V AC, 60 Hz Maximum efficiency: > _ 87% Full load efficiency: > _ 82% No load current draw: >1.
デバイスBlack & Decker VEC054Dの購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Black & Decker VEC054Dをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはBlack & Decker VEC054Dの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Black & Decker VEC054Dの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Black & Decker VEC054Dで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Black & Decker VEC054Dを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はBlack & Decker VEC054Dの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Black & Decker VEC054Dに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちBlack & Decker VEC054Dデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
