Black BoxメーカーIC136Cの使用説明書/サービス説明書
ページ先へ移動 of 23
SEPTEMBER 2003 IC136C USB Car d CUSTOMER SUPPORT INFORMATION Order toll-free in the U.S.: Call 877-877-BBOX (outside U.S. call 724-746-5500 ) FREE technical support 24 hours a day, 7 days a week: Call 724-746-5500 or fax 724-746-0746 Mailing address: Black Box Corporation , 1000 Park Drive, Lawrence, PA 15055-1018 Web site: www.
1 FCC AND IC RFI STATEMENTS FEDERAL COMMUNICATIONS COMMISSION AND INDUSTRY CANADA RADIO FREQUENCY INTERFERENCE STATEMENTS This equipment generates, uses, and can radiate radio-frequency energy, and if not installed and used properly, that is, in strict accordance with the manufacturer’s instructions, may cause interference to radio communication.
2 USB CARD TRADEMARKS USED IN THIS MANUAL IBM is a registered trademark of International Business Machines Corporation. Microsoft and Windows are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.
3 CONTENTS Contents Chapter Page 1. Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 2. Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 2.1 Overview. . . . . . . . . . . . . . . . . . . . . . . . . .
4 USB CARD 1. Specifications System Requirements : Hardware: IBM ® PC or compatible, PCI slot; Software: Microsoft ® Windows ® 98/ 2000/XP Interface : PCI Connectors : (2) USB “A” type Power : From the PCI bus Size : 1"H x 4"W x 4"D (2.
5 CHAPTER 2: Introduction 2. Intr oduction 2.1 Overview The USB Card upgrades your PC to Universal Serial Bus (USB). It’s plug-and-play and provides a user-friendly interface.
6 USB CARD 2.3 System Requirements • IBM PC compatible • PCI slot. • A supported operating system: Windows 98, 2000, or XP. 2.4 What the Package Includes • USB Card.
7 CHAPTER 3: Installation 3. Installation Follow these steps to install the card and software: 1. Add the USB driver to a system that is running Windows 98, 2000, or XP. 2. Install the card in your computer. 3. Install the software for either Windows 98, 2000, or XP.
8 USB CARD disappear, the installation is complete. Remove the diskette from your A: drive. 3.2 Hardware Installation 1. Turn off the power to your computer and disconnect the power cable. 2. Open the computer case. 3. Select an open PCI slot. Remove the cover plate for that slot.
9 CHAPTER 3: Installation 3.3 Installing the USB Card in Windows 98 NOTE You must already have Windows 98 installed on your computer and running properly before installing the USB Card. 1. After you install your card in your computer’s PCI slot, the Windows 98 Plug-and-Play will start detecting the USB Card and will load the driver automatically.
10 USB CARD 2. Click Next to continue. The Wizard will prompt, What do you want Windows to do? See Figure 3-2. Figure 3-2. “ What do you want Windows to do?” prompt.
11 CHAPTER 3: Installation 3. Click Next to continue. The Wizard will prompt with Specify a Location . See Figure 3-3. Figure 3-3. “Specify a Location” prompt.
12 USB CARD 4. Choose path A: if your diskette is at A. Click Next to continue. See Figure 3-4. Figure 3-4. Selecting the updated driver..
13 CHAPTER 3: Installation 5. Click Next to continue. See Figure 3-5. Figure 3-5. Windows driver file search for the device..
14 USB CARD 6. Click Next to continue. The Install Completed screen appears. See Figure 3-6. Figure 3-6. “Install Completed” screen. 7. Click Finish to continue. 8. Attach the USB peripheral on the USB connector. Reboot the system after installation is complete.
15 CHAPTER 3: Installation 3.4 Installing the USB Card in Windows 2000 Right click on My Computer , select Properties , and Hardware , then Device Manager to verify that the installation is complete.
16 USB CARD 3.5 Installing the USB Card in Windows XP 1. Select Install the software automatically (Recommended) and click Next . See Figure 3-8. Figure 3-8.
17 CHAPTER 3: Installation 2. Click Continue Anyway . See Figure 3-9. Figure 3-9. Hardware Installation screen..
18 USB CARD 3. The wizard has finished installing the software. Click Finish . See Figure 3-10. Figure 3-10. Completing the Found New Hardware Wizard screen. 4. Repeat steps 1 to 3 if needed. 5. Right-click My Computer , select Properties , and Hardware , then Device Manager to verify that the driver installation is complete.
19 CHAPTER 3: Installation Figure 3-11. Device Manager tab..
20 USB CARD Appendix: T r oubleshooting A.1 Problem/Solution Problem : A device in your computer does not work, or does not work properly, after the USB Card is installed. Solution : There might be a hardware conflict between the USB Card and another device.
21 USB CARD • the nature and duration of the problem. • when the problem occurs. • the components involved in the problem. • any particular application that, when used, appears to create the problem or make it worse. A.3 Shipping and Packaging If you need to transport or ship your USB Card: • Package it carefully.
1000 Park Drive • Lawrence, PA 15055-1018 • 724-746-5500 • Fax 724-746-0746 © Copyright 2003. Black Box Corporation. All rights reserved..
デバイスBlack Box IC136Cの購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Black Box IC136Cをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはBlack Box IC136Cの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Black Box IC136Cの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Black Box IC136Cで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Black Box IC136Cを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はBlack Box IC136Cの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Black Box IC136Cに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちBlack Box IC136Cデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。