

QuietCab Elite™ Cabinet Assembly Instructions
Follow these instructions to assemble your QuietCab Elite Cabinet:
Make sure you have the following items:
A. (1) base


B. (4) caster plates
C. (4) load-bearing casters with (16) M6 pozi pan screws
D. (4) corner posts with (16) M6 pozi pan screws
E. (4) mounting angles with (16) M6 pozi pan screws
F. (72) M6 pozi pan screws
G. (32) M6 socket button screws
H. (1) 4-mm Allen key

I. (1) top cover
J. (4) depth-support rails with (16) M6 pozi pan screws

K. (4) infills with (24) M6 pozi screws
L. (8) 16-mm gasket foam side panels
M. (8) 100-mm front and rear gasket foam panels
N. (1) anti-recirculation kit ([5] pieces per side
and [6] pieces for top and bottom front)
O. (2) side panels
P. (1) front left door
Q. (1) front right door
R. (1) rear left door
S. (1) rear right door
© Copyright 2012. Black Box Corporation. All rights reserved. Black Box and the Double Diamond logo are registered trademarks, and Elite is a trademark, of BB Technologies,
Inc. Any third-party trademarks appearing in this document are acknowledged to be the property of their respective owners.
724 -746 -5500 | blackbox.com
Page 1






the distance between front and rear mounting angles. Leave a distance of 1.9” (50 mm) between any mounted equipment and the front and rear doors.

724 -746 -5500 | blackbox.com
’ · Page 2







thumbs, install the gasket into place. Remember that the 0.6” (15-mm) gasket is for the sides and the 0.4” (10-mm) gasket is for the front and rear.


724 -746 -5500 | blackbox.com
Page 3
この取扱説明書で参照されているリンク(メーカー、サポート、ダウンロード等)。
ユーザーまたはスタッフが通常1日以内に回答します。あなたの質問が次の人の助けにもなります。
最初の質問を投稿しましょう。他のユーザーや当チームが回答します。