Actiontec electronicメーカー56K/V.92の使用説明書/サービス説明書
ページ先へ移動 of 43
U ser Manual 56K/V .92 Ex ternal Modem.
i T able of C on tents Introduction 1 Fe a tures 1 P ackage Contents 2 Fir m w ar e Updates 2 Safety Information 3 T echnical Support 4 C onnecting the Modem 5 Pow er Switch 6 Fr ont Panel 6 Installing the Software 7 Windows 98 and 98 SE 7 Windows Me 10 Windows NT 4.
ii Ac tion tec External 56K/V92 Modem User Manual.
1 Intr oduc tion Thank you for pur chasing the Act ion te c V .92 External Modem. The Modem is also co mpatible w ith the V .90 and K56Flex™ standards. ☞ Im por tant : Please read this entire c hapter . It contains important safety information. Fe a tures Am ong the features of the V .
2 Ac tion tec 56K/v92 External Modem User Manual V .80 video standard support for v ideophone and video conferencing Co ntroller -based, w ith support for W indows 98, M e, NT , 2000, and XP S imple “Plug-N-Pla y” installation P ackage C ontents Ac tiontec V .
3 Chapter 1 Introduction Sa fe ty Information Shock Hazard To av oid shock hazard: The power c ord and any other equipment t o which this product is attac hed m ust be c onnected to properly wired rec eptacles.
4 Ac tion tec 56K/v92 External Modem User Manual T echnical Suppor t Ac t ion te c Electronics, I nc., prides itself on making durable, high-quality , hig h- performance products. If you need assistance, the Ac t ion te c T echnical Support Department is always available, 24 hours a day , seven da ys a week, to pr ovide pro- fessional support.
5 C onnec ting the Modem To co nnect the Modem: 1. Ensure the co mputer is po wered do w n. 2. Plug the serial cable connected to the r ear panel of the Modem in the serial port on the computer . 3. Plug one end of the phone cable to the “Line ” port on the rear panel of the Mo dem, and the other end to the phone wall jack.
6 Ac tion tec External 56K/V92 Modem User Manual Pow er Switch The Modem ’ s P ower S w itch is located on the left side of the rear panel, and is a push-button type sw itch.
7 Installing the Sof twar e Af te r connecting the M odem to the comput er and the phone line, the driver soft- ware must be loaded on the c omputer . Select the operating system used, and fol- low the instructions.
8 Ac tion tec External 56K/V92 Modem User Manual 4. In the next window , select Search for the best driv er for y our dev ice (Rec ommended) , then click N ext.
9 Chapter 3 Installing the Software 6. In the next window that appears, W indows sear ches for and then finds the proper softwar e on the Installation CD . Click N ext . 7. The software is loaded on the hard driv e of the computer . W hen the window , below , appears, click Finish .
10 Ac tion tec External 56K/V92 Modem User Manual W indo ws Me 1. Ensure the M odem is tur ned off, then power up the comput er and, while it is booting, insert the Installation CD in the CD-R OM dr ive. 2. Af te r the computer has booted, tur n on the M odem.
11 Chapter 3 Installing the Software 5. The “Bro wse for Folder” w indow appears. Click on the + next to “EX T 560_V181 [X:]” CD-ROM icon (wher e X is the drive lett er of the CD-ROM drive on the c omputer). Three folders appear underneath “EXT 560_V181 [X:].
12 Ac tion tec External 56K/V92 Modem User Manual 7. In the next “ Add N ew Hard ware W izard” w indow , c lick N ext . 8. In the next window , Windo ws searches for and then finds the pr oper software on the Installation CD .
13 Chapter 3 Installing the Software 9. The final “ Add New H ardware Wizard” window appears. Click Finish to co m- plete the download. The Modem is no w ready to use. Ve rifying Driver Software Installation ( Windows 98 and Me) To ver ify the Modem and its driv er software ar e configur ed properly: 1.
14 Ac tion tec External 56K/V92 Modem User Manual 3. In the “Diagnostics” tab of the “Modem Pr operties” window , select the COM port used by the Modem, then click Mor e I nf o … . 4. The “M ore Info ” w indow appears, displaying the settings used by the M o dem.
15 Chapter 3 Installing the Software W indow s NT 4.0 1. Ensure the M odem is tur ned off, then power up the comput er and, while it is booting, insert the Installation CD in the CD-R OM dr ive. 2. Af te r the computer has booted, tur n on the M odem.
16 Ac tion tec External 56K/V92 Modem User Manual 6. In the next window , click Ha ve Disk… 7. In the “Install Fr om Disk” window , na v igate to the CD-R OM dr ive (either b y bro wsing using t.
17 Chapter 3 Installing the Software 8. The “Locate File ” w indow appears. Select the CD-R OM drive ic on from the “Look in ” drop do wn list. 9. The contents of the CD appear in the “Locate File” window . Select EX T 56KV92 , then click Open.
18 Ac tion tec External 56K/V92 Modem User Manual 10. The contents of the folder appear in the “Locate File” window . Select Drivers , then click Open. 11. The contents of the “Drivers ” folder appear in the “Locate File ” window . Select W inNT , then click Open .
19 Chapter 3 Installing the Software 12. The contents of the “W inNT ” folder appear in the “Locate File” window . Select M dmatex.inf , then click Open.
20 Ac tion tec External 56K/V92 Modem User Manual 14. In the next window , ensure Ac ti ontec 56K External Modem is listed in the “Models ” list box, then click OK 15. A nother window appears. Ensure Ac ti ontec 56K External Modem is listed in the text bo x, then click N ext .
21 Chapter 3 Installing the Software 16. A “M odem Setup ” window appears, stating that the computer needs to be r estarted before the M odem can be used. Click OK . 17. Af te r the computer has r estarted, an “Install New M odem” window appears, stating that the Modem has been set up suc cessfully .
22 Ac tion tec External 56K/V92 Modem User Manual W indow s 2000 1. Ensure the M odem is tur ned off, then power up the comput er and, while it is booting, insert the Installation CD in the CD-R OM dr ive. 2. Af te r the computer has booted, tur n on the M odem.
23 Chapter 3 Installing the Software 4. In the next window , select Search for a suitable driv er for m y device (rec- ommended) , then click N ext . 5. A nother “Found New H ardware Wizard” window appears. Select CD-ROM drives from the “Optional search locations” list, then click N ext .
24 Ac tion tec External 56K/V92 Modem User Manual 6. In the next window , Windo ws states it has found the driv er . Click N ext . 7 .T he final “Found N ew Hardwar e W izard” window appears. Click Finish .T h e driver softwar e is now installed. The Modem is no w ready to use.
25 Chapter 3 Installing the Software W indow s XP 1. Ensure the M odem is tur ned off, then power up the comput er and, while it is booting, insert the Installation CD in the CD-R OM dr ive. 2. Af te r the computer boots up , turn on the M odem. 3. The first “Har dwar e U pdate Wizard” window appears.
26 Ac tion tec External 56K/V92 Modem User Manual 4. A nother “Hardwar e U pdate Wizard” window appears. Select Search remo v- able media (floppy , CD-ROM…) , then click N ext . 5. Wh en the “Found N ew Hard ware W izard” w indow appears, click Finish .
27 Chapter 3 Installing the Software Ve rifying Driver Software Installation ( Windows 2000 and XP) To ver ify the Modem and its driv er software ar e configur ed properly: 1. Right-click My Co mputer , then select Prop er t ies . 2. In the “System Pr operties” window , select Har dw ar e , then click Dev ice M anager… .
28 Ac tion tec External 56K/V92 Modem User Manual 4. Wh en the “ Actiontec V .92 External Modem Pr oper ties” window appears, select Diagnostics , then click Quer y Modem .
29 Tr oubleshooting This section describes a few problems that may be enc ounter ed when using the Mo dem, and solutions to over come them. When I restart my computer , the Modem is not detected. Ensure the M odem is tur ned on, and the ser ial cable is connect ed properly t o a COM port on the computer , then restart the computer .
30 Ac tion tec External 56K/V92 Modem User Manual.
31 AT C ommands To access the M odem manually , use A T commands. A T c ommands can be sent to the Modem fr om a computer running a communications pr ogram. C ommand F ormat All commands must begin with the A T prefix, follo wed by the parameter , and end- ing by pressing the Ent er ke y on the keyboard.
32 Ac tion tec External 56K/V92 Modem User Manual H0 H angs up the telephone line* H1 Picks up the telephone line Ln Speaker v olume L0 Off or low speak er volume L1 Low v olume L2 Me dium volume* L3 Hig h vo lu me ITU–T V .90 Operation Commands Three S-registers support K56flex, V .
33 Chapter 4 Tr oubleshooting S37 = 12 16800 bits/s S37 = 13 19200 bits/s S37 = 14 21600 bits/s S37 = 15 24000 bits/s S37 = 16 26400 bits/s S37 = 17 28800 bits/s S37 = 18 31200 bits/s S37 = 19 33600 b.
34 Ac tion tec External 56K/V92 Modem User Manual S38 = 16 48000 bits/s S38 = 17 49333 bits/s S38 = 18 50666 bits/s S38 = 19 52000 bits/s S38 = 20 53333 bits/s K56flex and V .90 S election (S109) U se this register to disable 56K co nnections, or to select between K56flex and V .
35 Notic es Regulatory Complianc e Notices Class B Equipment This equipment has been tested and found t o comply with the limits for a Class B digital dev ice, pursuant to P a rt 15 of the FCC R ules. These limits are designed to provide reasonable pr otection against har mful interfer ence in a residential installa- tion.
36 Ac tion tec External 56K/V92 Modem User Manual Modifications The FCC re quires the user to be notified that an y changes or modifications made to this dev ice that are not expr essly approved b y A ction te c Electronics, Inc., may vo id the user’ s author ity to operate the equipment.
37 Limited W arran ty Har d ware : Ac t ion te c Elect ronics, Inc., warrants to the end user (“C ustomer”) that this hardwar e product w ill be free fr om defects in workmanship and materials, under normal use and ser vice, for twelve (12) months fr om the date of purchase from Ac t ion te c Electronics or its authorized reseller .
38 Ac tion tec External 56K/V92 Modem User Manual THIS A CTION TEC ELECTRONICS PRODUCT MA Y INCLUDE OR BE B UNDLED WITH THIRD-P AR TY SOFTW ARE, THE USE OF WHICH IS GO VERNED BY A SEP A- RA TE END-USER LICENSE A GREEMENT . THIS A CTION TEC ELECTRONICS W ARRANTY DOES NOT APPL Y TO SUCH THIRD- PA R TY SOFTW ARE.
39 Limited W arranty NEITHER ASSUMES NOR A UTHORIZES ANY OTHER P ERSON T O ASSUME FOR IT ANY OTHER LIABILITY IN CONNECTION WITH THE SALE, INST ALLA TION, MAIN- TEN ANCE OR USE OF ITS PR ODUCTS.
40 Ac tion tec External 56K/V92 Modem User Manual Gov erning Law :T his Limited W arrant y shall be governed b y the laws of the State of California, U .S.A., excluding its c onflicts of laws and principles, and excluding the U nited Nations C on vention on Contracts for the International Sale of Goods.
デバイスActiontec electronic 56K/V.92の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Actiontec electronic 56K/V.92をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはActiontec electronic 56K/V.92の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Actiontec electronic 56K/V.92の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Actiontec electronic 56K/V.92で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Actiontec electronic 56K/V.92を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はActiontec electronic 56K/V.92の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Actiontec electronic 56K/V.92に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちActiontec electronic 56K/V.92デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。