Boca ResearchメーカーM73-APO01-810の使用説明書/サービス説明書
ページ先へ移動 of 20
M73-APO01-810 802.11g Wireless LAN Card Quick Installation Guide.
INSTALLATION Caution: Do not i nsert the Wireless PC Car d into your computer un til the procedures in “ Install the Driver & Utility ” has been performed. Install the Driver & Utility 1. Exit all Windows progr ams. Insert the CD-ROM into the CD-ROM drive of your computer.
- 2 - 4. The Choose Destination Location scree n will show you the default destinatio n chosen by the utility. Click Next to c ontinue. 5. Follow the instruction to select th e program folder.
- 3 - 6. Clic k Finish to complete the in stallation.
- 4 - Install the device Note : Make sure the procedures in “ Install the Driver & Utility ” has been p erformed. 1. If you are using the Wireless PCI Car d, before installing t he device, m ake sure the com puter is turned off . Remove the expansion slot cover from the computer.
Note for Windows 2000 users: During the installation, when the “ Digital Signature Not Found” screen appears, click “ Yes” to continue. Note for Windows XP users: 1.
- 6 - 3. Click Continue Anyway. 4. Click Finish to complete the installation . Verify Device Installation To verify t hat the de vice has bee n properly installed in your compu ter and is enabled , go to Start Æ Settings Æ Contro l Panel Æ Syst em ( Æ Hardware) Æ Device Manager .
- 7 - PCI/CardBus PC Card is listed, it means that your device is properly installed and enabled. CONFIGURATION After successful installation of the Wireless LAN Card’s driver, a Networ k Status icon will display in the task bar. You will be able to access the Configuration Utility through the N etwork Status icon.
- 8 - The Network Status Icon The Network Status Icon will display on the t ask bar of your desktop and show the current network connection status of your system.
- 9 - Disconnected from network Accessing the Configuration Utility The Configuration Utility is ac cessed by clicking on the Network Status Icon . All settings are categor ized into 5 Tabs: Main Tab Advanced Tab Privacy Tab Statistics Tab About Tab Main Tab The Main tab displays the current status of t he Wireless Network Adapter.
Item Description External Configuration To Enable or Disable the manufacturer’s configuration utility ： Enable ： Check this item to use Windo ws XP build-in utility or other manufacture rs’, such a s Funk, Odyssey client utility. Disable ： Left th is item unchecked to use the utility we provide.
Item Description - 1 1 - Network Adapter and the Access Point it connects to. BBS ID A set of wireless stations is referred to as a Basic S ervice Set (BSS) . Computers in a BSS must be configured with the same BSS ID. Current Configuration Pref. SSID It shows the current SSID setting of the Wireless Network Adapter.
- 12 - Preferred SSID Type in the SSID name of the device you want to connect. BSS Type You can select Peer-to-Peer , Acce ss Point or Auto Mode of the device you to connect. Tx Rate You can select the data rate or set to auto mode from the pull-down menu.
- 13 - 802.11b +(B-Plus) , 802.11g ( G-Only )standard or B&G Mode (If you choose this option the device will automatica lly convert the suitable standard ).
- 14 - of this value are recommended. Preamble A preamble is a signal used in wireless environment to synchronize the transm itting timing including Synchronization and Start frame delimiter. ( Note : If you want to change the Preamble type into Long or Short , please check the setting of AP.
- 15 - Advanced Tab The Advanced tab display s the current stat us of the Wireless Network Adapter. Privacy Tab Use the Privacy Tab to configure your WEP and CCX settings. WEP (Wired Equivalent Privac y) and CCX （ Cisco Compatible Extensio n ） encryption can be used t o ensure the security of your wireless network.
- 16 - If you check ed External Configur ation in the Main tab(see page 10 ), functions in the fol lowing figure will be disabled. Privacy Mod e Configure your NONE 、 WEP or CCX settings ： NONE ： No security defined. WEP (Wired Equivalent Privacy) is a data security m echanism based on a 40 Bit/128 Bit/256 Bit shared key algorithm.
- 17 - CCX （ Cisco Compatible Extension ） . It provides user-based, centralized auth entication, as w ell as per-u ser wir ed equi vale nt priva cy (WEP) session keys. Press the Select button to change CCX configuration. A new dialog window will be opened.
- 18 - (0-9, A-F) is required if a 128-bit Key Length was selected. A key of 58 hexadecimal characters (0-9, A-F) is required if a 256-bit Key Length was selected. Key size 40 Bit , 128 Bit or 256 Bit . CCX Configuration Network Security Typ e None – Choosing it will enable the WEP Select button.
- 19 - timeout packets, Authentication rejec t packets, Authentication timeou t packets . About Tab Click on the About tab to view ba sic vers ion information about the OS V ersion, Utility V ersion, Driver V ersion, Firmwar e V ersion and EEPROM V ersion .
デバイスBoca Research M73-APO01-810の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Boca Research M73-APO01-810をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはBoca Research M73-APO01-810の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Boca Research M73-APO01-810の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Boca Research M73-APO01-810で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Boca Research M73-APO01-810を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はBoca Research M73-APO01-810の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Boca Research M73-APO01-810に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちBoca Research M73-APO01-810デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
