Bosch AppliancesメーカーVJR SERIESの使用説明書/サービス説明書
ページ先へ移動 of 194
AutoDome Junior HD VJR Series en Installation Manual.
.
AutoDome Junior HD Table of Cont ents | en 3 Bosch Security Systems, Inc. Installation Manual F .01U.275.803 | 6.0 | 2012.11 T able of Contents 1S a f e t y 8 1.1 Important Safety Instructions 8 1.2 Safety Precautions 11 1.3 Important Notices 11 1.4 Customer Support and Service 18 2 Unpacking 19 2.
4 en | Table of Cont ents AutoDome Junior HD F .01U.275.803 | 6.0 | 2012.11 Installation Manual Bosch Security Systems, Inc. 6 Installing a Recessed Mount 46 6.1 Description 46 6.2 Indoor Recessed Installation 47 6.2.1 Additional Requirements 47 6.2.2 Preparing the Ceiling for Installation 48 6.
AutoDome Junior HD Table of Cont ents | en 5 Bosch Security Systems, Inc. Installation Manual F .01U.275.803 | 6.0 | 2012.11 11 Using the IP Interface 88 11.1 Ove rview of Features 89 11.2 Sys tem Requirements 90 11.3 Conn ecting the AutoDome Junior HD to the PC 91 11.
6 en | Table of Cont ents AutoDome Junior HD F .01U.275.803 | 6.0 | 2012.11 Installation Manual Bosch Security Systems, Inc. 12.22 PTZ Settings 137 12.23 Diagnostics 138 12.24 Preposition and Tours 139 12.25 Sectors 140 12.26 Miscellaneous 141 12.27 Logs 141 12.
AutoDome Junior HD Table of Cont ents | en 7 Bosch Security Systems, Inc. Installation Manual F .01U.275.803 | 6.0 | 2012.11 13 Keyboard Commands by Number 179 14 Preventive Maintenance 181 15 Troubleshooting 182 15.1 AutoDome Junior Operation and Control 182 15.
8 en | Saf ety Aut oDome Junior HD F .01U.275.803 | 6.0 | 2012.11 Installation Manual Bosch Security Systems, Inc. 1S a f e t y 1.1 Impor tant Safety Instr uctions Read, follow, and retain for future reference all of the following safety instructions.
AutoDome Junior HD Safety | en 9 Bosch Security Systems, Inc. Installation Manual F .01U.275.803 | 6.0 | 2012.11 7. Control adjustment - Adjust only those controls specif ied in the operating instructions. Improper adjustment of other controls may cause damage to the un it.
10 en | Saf ety Aut oDome Junior HD F .01U.275.803 | 6.0 | 2012.11 Installation Manual Bosch Security Systems, Inc. 11. Servicing - Do not attempt to service this unit yourself. Opening or removing covers may expose you to dangerous voltage or other hazards.
AutoDome Junior HD Safety | en 11 Bosch Security Systems, Inc. Installation Manual F .01U.275.803 | 6.0 | 2012.11 1.2 Safety Precautions 1.3 Impor tant Notices Accessories - Do not place this unit on an unstable stand, tripod, bracket, or mount. The unit may fall, causing serious injury to persons and/or severe damage to the unit.
12 en | Saf ety Aut oDome Junior HD F .01U.275.803 | 6.0 | 2012.11 Installation Manual Bosch Security Systems, Inc. switch as the main disconnect device for switching off the voltage to the unit.
AutoDome Junior HD Safety | en 13 Bosch Security Systems, Inc. Installation Manual F .01U.275.803 | 6.0 | 2012.11 Environmental statement - Bosch has a strong commitment to the environment. This unit has been designed to respect the environment as mu ch as possible.
14 en | Saf ety Aut oDome Junior HD F .01U.275.803 | 6.0 | 2012.11 Installation Manual Bosch Security Systems, Inc. Power disconnect - Units have power supplied wh enever the power cord is inserted into th e power source. The power cord is the main power disconnect for all units.
AutoDome Junior HD Safety | en 15 Bosch Security Systems, Inc. Installation Manual F .01U.275.803 | 6.0 | 2012.11 FCC & ICES INFORMATION (U.S.A. and Canadian Models Only) This device complie s with part 15 of the FCC Rules .
16 en | Saf ety Aut oDome Junior HD F .01U.275.803 | 6.0 | 2012.11 Installation Manual Bosch Security Systems, Inc. INFORMATIONS FCC ET ICES (modèles utilisés aux États-Un is et au Canada uniquement) Ce pro duit est co nfor me aux norme s FCC p artie 15.
AutoDome Junior HD Safety | en 17 Bosch Security Systems, Inc. Installation Manual F .01U.275.803 | 6.0 | 2012.11 Disclaimer Underwriter Laboratories Inc. (“UL”) has not tested the performance or reliability of the securit y or signaling aspects of this product.
18 en | Saf ety Aut oDome Junior HD F .01U.275.803 | 6.0 | 2012.11 Installation Manual Bosch Security Systems, Inc. 1.4 Customer Support and Ser vice If this unit needs service, con tact the nearest Bosch Security Systems Service Center for author ization to return and shipping instructions.
AutoDome Junior HD Unpacking | en 19 Bosch Security Systems, Inc. Installation Manual F .01U.275.803 | 6.0 | 2012.11 2 Unpacking This equipment should be unpack ed and handled with care. If an item appears to have been damaged in shipment, notify the shipper immediately.
20 en | Unpacking AutoDome Junior HD F .01U.275.803 | 6.0 | 2012.11 Installation Manual Bosch Security Systems, Inc. 2.2 Saf ety Rules To ensure safety, the following warnings are specified: – The device must be insta lled and maintained by skilled technical personnel.
AutoDome Junior HD Description | en 21 Bosch Security Systems, Inc. Installation Manual F .01U.275.803 | 6.0 | 2012.11 3 Description The AutoDome Junior is part of a larger building block for any surveillance/security system. By using multiple keyboard controllers and multiple dome came ras, no place is too large for monitoring.
22 en | Description AutoDome Junior HD F .01U.275.803 | 6.0 | 2012.11 Installation Manual Bosch Security Systems, Inc. This installation should be made by qualified service personnel and conform to the National El ectrical Code and applicable local codes.
AutoDome Junior HD Installing a Surface Mount | en 23 Bosch Security Systems, Inc. Installation Manual F .01U.275.803 | 6.0 | 2012.11 4 Installing a Sur face Mount 4.1 Description This chapter details how to mo unt the AutoDome Junior to a hard surface.
24 en | Installing a Surface Mount AutoDome Junior HD F .01U.275.803 | 6.0 | 2012.11 Installation Manual Bosch Security Systems, Inc. 4.1.1 Additional Tools Required – Appropriate straigh t slot screwdrivers – No. 2 Phillips screwdriver – Appropriate tool for cutting a ho le in drywall or ceiling tile (if applicable) – 4 in.
AutoDome Junior HD Installing a Surface Mount | en 25 Bosch Security Systems, Inc. Installation Manual F .01U.275.803 | 6.0 | 2012.11 2. Install a 4 in. gang box or square metal junction box (not supplied). Ensure junction b o x and mounting screws are capable of supporting a maximum load of 11.
26 en | Installing a Surface Mount AutoDome Junior HD F .01U.275.803 | 6.0 | 2012.11 Installation Manual Bosch Security Systems, Inc. 4.1.3 Preparing the Surface Mount for an Outdoor Installation The .
AutoDome Junior HD Installing a Surface Mount | en 27 Bosch Security Systems, Inc. Installation Manual F .01U.275.803 | 6.0 | 2012.11 2. Use the VEZ-A2-JC or VEZ-A2 -JW Surface Mount Adapter as a template to mark the location of the four (4) M4 or #10 pan head screws (Item 1, below).
28 en | Installing a Surface Mount AutoDome Junior HD F .01U.275.803 | 6.0 | 2012.11 Installation Manual Bosch Security Systems, Inc. b. Thread the flat side of the ga sket (item 1, below) onto the recessed side of the retaining ring (item 2). The illustration below shows a cross-section of the gasket on the retai ning rin g.
AutoDome Junior HD Installing a Surface Mount | en 29 Bosch Security Systems, Inc. Installation Manual F .01U.275.803 | 6.0 | 2012.11 8. Determine the side of the Su rface Mount Adapter in which the external wires are to be routed and remove the plug from the knockout.
30 en | Installing a Surface Mount AutoDome Junior HD F .01U.275.803 | 6.0 | 2012.11 Installation Manual Bosch Security Systems, Inc. 11. Route the external wires through the conduit and into the Surface Mount Adapter. 12. Secure the mounting plate to the Surface Mount Adapter with the three (3) M4 – .
AutoDome Junior HD Installing a Surface Mount | en 31 Bosch Security Systems, Inc. Installation Manual F .01U.275.803 | 6.0 | 2012.11 5. Unlock the single safety locking screw on the base of the unit using the user-supplied Allen wrench. Figure 4. 9 Unl ock Safe t y Locki ng S crew 6.
32 en | Installing a Surface Mount AutoDome Junior HD F .01U.275.803 | 6.0 | 2012.11 Installation Manual Bosch Security Systems, Inc. 8. Attach the camera to the mounting plate by inserting the vertical tab on the plate (item 1, below) into the recessed slot on the top of the camera dome (Item 3) to the right of the safety locking screw (item 2).
AutoDome Junior HD Installing a Surface Mount | en 33 Bosch Security Systems, Inc. Installation Manual F .01U.275.803 | 6.0 | 2012.11 9. Rotate the camera approximately 15 degrees in a clockwise direction to lock firm ly into place, as shown in the next illustration.
34 en | Installing a W all Mount AutoDome Junior HD F .01U.275.803 | 6.0 | 2012.11 Installation Manual Bosch Security Systems, Inc. 5 Installing a W a ll Mount 5.
AutoDome Junior HD Installing a W all Mount | en 35 Bosch Security Systems, Inc. Installation Manual F .01U.275.803 | 6.0 | 2012.11 5.1.2 Preparing the Wall Mount for an Indoor or Installation Use the following instructions to mount to an indoor wall.
36 en | Installing a W all Mount AutoDome Junior HD F .01U.275.803 | 6.0 | 2012.11 Installation Manual Bosch Security Systems, Inc. 3. Attach a grounded metal co nduit to the junction box clamp. Figu re 5.2 Metal Conduit 4. Feed the wires through the conduit.
AutoDome Junior HD Installing a W all Mount | en 37 Bosch Security Systems, Inc. Installation Manual F .01U.275.803 | 6.0 | 2012.11 8. Secure with the appropriate user-pro vided SEMS screws that have an integral lock wa sher to dig through the paint and ensure an electrical gr ound connection to the arm housing or ground lug.
38 en | Installing a W all Mount AutoDome Junior HD F .01U.275.803 | 6.0 | 2012.11 Installation Manual Bosch Security Systems, Inc. 5.1.3 Preparin g the Wall Mo unt for an O utdoor Installation The followin g instructio ns detai l the surface preparations and the steps to install the Wall Mo unt for an outdoor application.
AutoDome Junior HD Installing a W all Mount | en 39 Bosch Security Systems, Inc. Installation Manual F .01U.275.803 | 6.0 | 2012.11 a. Locate the flat side of th e gasket and the recessed side of the retaining ring. b. Thread the flat side of the gasket (item 1, below) onto the recessed side of the re taining ring (item 2).
40 en | Installing a W all Mount AutoDome Junior HD F .01U.275.803 | 6.0 | 2012.11 Installation Manual Bosch Security Systems, Inc. 6. Attach the mounting cap to the arm. Using the AutoDome Junior Outdoor Installation Ki t, apply the following O-ri ng and the retaining ring to the locations specified below: Figu re 5.
AutoDome Junior HD Installing a W all Mount | en 41 Bosch Security Systems, Inc. Installation Manual F .01U.275.803 | 6.0 | 2012.11 8. Place the Wall Mount flat gask et (item 1, below), between the surface and Wall Mount; then secure the mount using four (4) appropriate user-p rovid ed fasteners such as Moly or Toggle bolts.
42 en | Installing a W all Mount AutoDome Junior HD F .01U.275.803 | 6.0 | 2012.11 Installation Manual Bosch Security Systems, Inc. Figu re 5.7 At tach Mounting P late t o Dome Cap 2. Route wires on side of mounting plate with c rescent shaped cut-out (Ref.
AutoDome Junior HD Installing a W all Mount | en 43 Bosch Security Systems, Inc. Installation Manual F .01U.275.803 | 6.0 | 2012.11 6. Unlock the single safety locking screw on the base of the unit using the user-supplied Allen wrench. Figure 5. 8 Unl ock Safe t y Locki ng S crew 7.
44 en | Installing a W all Mount AutoDome Junior HD F .01U.275.803 | 6.0 | 2012.11 Installation Manual Bosch Security Systems, Inc. 9. Attach the camera to the mounting plate by inserting the vertical tab on the plate (item 1, below) into the recessed slot on the top of the camera dome (Item 3) to the right of the safety locking screw (item 2).
AutoDome Junior HD Installing a W all Mount | en 45 Bosch Security Systems, Inc. Installation Manual F .01U.275.803 | 6.0 | 2012.11 10. Rotate the camera approximately 15 degrees in a clockwise direction to lock firm ly into place, as shown in the next illustration.
46 en | Installing a Recessed Mount AutoDome Junior HD F .01U.275.803 | 6.0 | 2012.11 Installation Manual Bosch Security Systems, Inc. 6 Installing a Recesse d Mount 6.1 Descrip tion This chapter details how to instal l an AutoDome Junior into an indoor ceiling space or into an outdoor soffit.
AutoDome Junior HD Installing a Recessed Mount | en 47 Bosch Security Systems, Inc. Installation Manual F .01U.275.803 | 6.0 | 2012.11 6.2 Indoor Recesse d Installation This section details the steps to install an AutoDome Junior into an indoor ceiling space using the VJR-A3-IC AutoDome Junior HD Indoor In-ceiling Mount.
48 en | Installing a Recessed Mount AutoDome Junior HD F .01U.275.803 | 6.0 | 2012.11 Installation Manual Bosch Security Systems, Inc. 6.2.2 Preparing the Ceiling for Installation To mount to a recess mo unt, do the following: 1. Determine a secure location for the recesse d mount (supplied separately).
AutoDome Junior HD Installing a Recessed Mount | en 49 Bosch Security Systems, Inc. Installation Manual F .01U.275.803 | 6.0 | 2012.11 4. Align holes of mounting plate (supplied with dome) with mounting bracket and attach with screws.
50 en | Installing a Recessed Mount AutoDome Junior HD F .01U.275.803 | 6.0 | 2012.11 Installation Manual Bosch Security Systems, Inc. 6. Insert mount through the hole in the ceiling. Slide clamps out and down so that the ceiling/drywall is captured in between the clamps and the bracket flange.
AutoDome Junior HD Installing a Recessed Mount | en 51 Bosch Security Systems, Inc. Installation Manual F .01U.275.803 | 6.0 | 2012.11 6.2.3 Installing the Camera to the Mounting Plate To install the base to a surface or suspende d ceiling using the supplied mounting pl ate, do the following: 1.
52 en | Installing a Recessed Mount AutoDome Junior HD F .01U.275.803 | 6.0 | 2012.11 Installation Manual Bosch Security Systems, Inc. 6. Connect the mating connector s (supplied in the accessory kit) with the flying leads to the user supplied wiring (see the Section 8 Preparing the Wiring, page 77 for wiring information).
AutoDome Junior HD Installing a Recessed Mount | en 53 Bosch Security Systems, Inc. Installation Manual F .01U.275.803 | 6.0 | 2012.11 Figure 6. 7 Tab/Slo t Alignment Detail 9. Rotate the camera approx imately 15 degrees in the clockwise direction. Then, lock firmly into place, as shown in the next illustration.
54 en | Installing a Recessed Mount AutoDome Junior HD F .01U.275.803 | 6.0 | 2012.11 Installation Manual Bosch Security Systems, Inc. 10. Ensure unit is centered.
AutoDome Junior HD Installing a Recessed Mount | en 55 Bosch Security Systems, Inc. Installation Manual F .01U.275.803 | 6.0 | 2012.11 6.3 Outdoor and IP54 Re cessed Installation This section details the steps to install an AutoDome Junior into an indoor ceiling space that requires IP54 or a plenum rating or into an outdoor soffit.
56 en | Installing a Recessed Mount AutoDome Junior HD F .01U.275.803 | 6.0 | 2012.11 Installation Manual Bosch Security Systems, Inc. 6.3.1 Installation Requirements – Appropriate straigh t slot screwdrivers – No.
AutoDome Junior HD Installing a Recessed Mount | en 57 Bosch Security Systems, Inc. Installation Manual F .01U.275.803 | 6.0 | 2012.11 2. Drill or cut a 200 mm hole with a tolerance of 2.
58 en | Installing a Recessed Mount AutoDome Junior HD F .01U.275.803 | 6.0 | 2012.11 Installation Manual Bosch Security Systems, Inc. 5. Attach the retaining ring with gasket (item 2, below, supplied with the AutoDome Ju nior camera) to the VJR-A3- JW.
AutoDome Junior HD Installing a Recessed Mount | en 59 Bosch Security Systems, Inc. Installation Manual F .01U.275.803 | 6.0 | 2012.11 10. Attach the VJR-A3-JW to th e mounting bracket using the four (4) M4 x 16 Phillips Pa n Head Machine Screws (item 2, below) .
60 en | Installing a Recessed Mount AutoDome Junior HD F .01U.275.803 | 6.0 | 2012.11 Installation Manual Bosch Security Systems, Inc. 12. Loosen the tw o clamp drive sc rews (item 1, below) so that the clamping plates (item 2) move freely. Figu re 6.
AutoDome Junior HD Installing a Recessed Mount | en 61 Bosch Security Systems, Inc. Installation Manual F .01U.275.803 | 6.0 | 2012.11 14. Tighten both clamps using the clamp drive screws (installed on the assembly) an d a #2 Phillips screwdriver. Figure 6.
62 en | Installing a Recessed Mount AutoDome Junior HD F .01U.275.803 | 6.0 | 2012.11 Installation Manual Bosch Security Systems, Inc. 2. Remove the screw from the Earth ground ( )on the inside of the VJR-A3-JW. 3. Attach a user-supplied ground wire to the Earth ground ( ) screw hole on the VJR-A3-JW and secure with the screw.
AutoDome Junior HD Installing a Recessed Mount | en 63 Bosch Security Systems, Inc. Installation Manual F .01U.275.803 | 6.0 | 2012.11 8. Attach the camera to the mounting plate by inserting the verti.
64 en | Installing a Recessed Mount AutoDome Junior HD F .01U.275.803 | 6.0 | 2012.11 Installation Manual Bosch Security Systems, Inc. 9. Rotate the camera approximately 15 degrees in the clockwise direction. Then, lock firmly into place, as shown in the next illustration.
AutoDome Junior HD Installing a Recessed Mount | en 65 Bosch Security Systems, Inc. Installation Manual F .01U.275.803 | 6.0 | 2012.11 11. Align trim ring so th e four alignment posts (item 1, below) align with the recesses in the camera housing (item 2) and so the two safety screws align with the off center holes (item 3) on the locking clamps.
66 en | Installing a Pipe Mount AutoDome Junior HD F .01U.275.803 | 6.0 | 2012.11 Installation Manual Bosch Security Systems, Inc. 7 Installing a Pipe Mount 7.
AutoDome Junior HD Installing a Pipe Mount | en 67 Bosch Security Systems, Inc. Installation Manual F .01U.275.803 | 6.0 | 2012.11 7.1.1 Tools/Supplies Required – Appropriate straight sl ot screwdrivers – No.
68 en | Installing a Pipe Mount AutoDome Junior HD F .01U.275.803 | 6.0 | 2012.11 Installation Manual Bosch Security Systems, Inc. 2. Use the four (4) holes in the flange as a template to mark the position where the holes should be drilled to secure the mount.
AutoDome Junior HD Installing a Pipe Mount | en 69 Bosch Security Systems, Inc. Installation Manual F .01U.275.803 | 6.0 | 2012.11 Figure 7. 3 Location of O-rings for an outdoor installation a. Thread a 21.82 mm I.D. by Ø3.00 mm O-ring (item 1, above) between the flange threads and the upper coupler threads.
70 en | Installing a Pipe Mount AutoDome Junior HD F .01U.275.803 | 6.0 | 2012.11 Installation Manual Bosch Security Systems, Inc. 6. Outdoor Installation : Ensure that the gasket is attached to the retaining ring. If the gask et and the retaining ring are separate: a.
AutoDome Junior HD Installing a Pipe Mount | en 71 Bosch Security Systems, Inc. Installation Manual F .01U.275.803 | 6.0 | 2012.11 Figure 7. 4 O-ring and retaining ring placement for outdoor installation a. Thread the 21.82 mm I.D. by Ø3.00 mm O-ring (item 1, above) onto the lower pipe threads.
72 en | Installing a Pipe Mount AutoDome Junior HD F .01U.275.803 | 6.0 | 2012.11 Installation Manual Bosch Security Systems, Inc. 9. Pull the wires from the pipe, starting at the flange end. Figu re 7.5 At tach Pendant Pipe Mount to Ceiling NOTICE! The fasteners and mounting surface must be capable of supporting a maximum load of 11.
AutoDome Junior HD Installing a Pipe Mount | en 73 Bosch Security Systems, Inc. Installation Manual F .01U.275.803 | 6.0 | 2012.11 10. Attach user supplied ground lug. 11. Align holes of mounting pl ate (supplied with dome) with dome mounting cap and attach with the three (3) screws supplied.
74 en | Installing a Pipe Mount AutoDome Junior HD F .01U.275.803 | 6.0 | 2012.11 Installation Manual Bosch Security Systems, Inc. 7.1.3 Installing the Camera to the Mounting Plate To install the camera to a ceiling mount using the supplied mounting plate, do the following: 1.
AutoDome Junior HD Installing a Pipe Mount | en 75 Bosch Security Systems, Inc. Installation Manual F .01U.275.803 | 6.0 | 2012.11 Note: Do not loosen brass mounting buttons.
76 en | Installing a Pipe Mount AutoDome Junior HD F .01U.275.803 | 6.0 | 2012.11 Installation Manual Bosch Security Systems, Inc. 9. Rotate the camera approximately 15 degrees in the clockwise direction and lock firmly into place, as shown in the next illustration.
AutoDome Junior HD Preparing the Wiring | en 77 Bosch Security Systems, Inc. Installation Manual F .01U.275.803 | 6.0 | 2012.11 8 Preparing the Wiring All AutoDome Junior HD units provide three standard cables: an Ethernet cable, a 24 VAC power input cable for the camera, and an alarm input/output cable.
78 en | Preparing the Wiring AutoDome Junior HD F .01U.275.803 | 6.0 | 2012.11 Installation Manual Bosch Security Systems, Inc. 8.2 Connecting th e Po wer The AutoDome Junior HD is availa ble as an indoor or an outdoor model.
AutoDome Junior HD Preparing the Wiring | en 79 Bosch Security Systems, Inc. Installation Manual F .01U.275.803 | 6.0 | 2012.11 8.2.1 Power Connections to Indoor/Outdoor Cameras Figu re 8.
80 en | Preparing the Wiring AutoDome Junior HD F .01U.275.803 | 6.0 | 2012.11 Installation Manual Bosch Security Systems, Inc. 8.2.2 Power Connections to Heater (all outdoor models) The heater in an outdoor AutoDome Junior HD unit accepts power only from a single 24 VAC isolated power connector (white/red and white/black wir es).
AutoDome Junior HD Preparing the Wiring | en 81 Bosch Security Systems, Inc. Installation Manual F .01U.275.803 | 6.0 | 2012.11 8.3 Etherne t Connection The AutoDome Junior HD connect s to a 10 Base-T/100 Base-TX network either directly or via a switch.
82 en | Audio, Alarms and Rela y Connec tions AutoDome Junior HD F .01U.275.803 | 6.0 | 2012.11 Installation Manual Bosch Security Systems, Inc. 9 Audio, Alarms and Relay Connections 9.1 Alarm Input All AutoDome Junior models pr ovide connections for two alarm inputs, one alarm output, and one audio input.
AutoDome Junior HD Audio, Alarms and Relay Connections | en 83 Bosch Security Systems, Inc. Installation Manual F .01U.275.803 | 6.0 | 2012.11 9.2 Connecting Alarms (inputs 1 through 2) You can configure alarms 1 throug h 2 as Normally Open (N.O.) or Normally Closed (N.
84 en | Audio, Alarms and Rela y Connec tions AutoDome Junior HD F .01U.275.803 | 6.0 | 2012.11 Installation Manual Bosch Security Systems, Inc. 9.2.2 Connecting a Normally Closed Alarm 1. Connect the alarm to the appr opriate input (1 thro ugh 2) and ground at the AutoDome Junior.
AutoDome Junior HD Audio, Alarms and Relay Connections | en 85 Bosch Security Systems, Inc. Installation Manual F .01U.275.803 | 6.0 | 2012.11 9.3 Alarm Outputs The AutoDome Junior incorporates one (1) alar m output: an open collector output. Figu re 9.
86 en | Audio, Alarms and Rela y Connec tions AutoDome Junior HD F .01U.275.803 | 6.0 | 2012.11 Installation Manual Bosch Security Systems, Inc. Wire Specifications Max.
Au to D o m e Ju n i o r HD G e t ti n g St a r ted | en 87 Bosch Security Systems, Inc. Installation Manual F .01U.275.803 | 6.0 | 2012.11 10 G e t ting Star te d Once the installation is complete, the AutoDome Junior HD can be programmed.
88 en | Using the IP Interface AutoDome Junior HD F .01U.275.803 | 6.0 | 2012.11 Installation Manual Bosch Security Systems, Inc. 11 Using the IP Interface The AutoDome Junior HD tran smits PTZ control c ommands and images over a TCP/IP network.
AutoDome Junior HD Using the IP Int er face | en 89 Bosch Security Systems, Inc. Installation Manual F .01U.275.803 | 6.0 | 2012.11 11.1 Overview of F eatures The AutoDome Junior HD modu le includes the following functionality: Function Description Video Encoding The camera uses the H.
90 en | Using the IP Interface AutoDome Junior HD F .01U.275.803 | 6.0 | 2012.11 Installation Manual Bosch Security Systems, Inc. 11.2 Syst em Requirements The AutoDome Junior HD requires specific software and hardware to allow a user to view live images and to configure camera settings over a TCP/IP network.
AutoDome Junior HD Using the IP Int er face | en 91 Bosch Security Systems, Inc. Installation Manual F .01U.275.803 | 6.0 | 2012.11 – Software: – Microsoft Internet Explorer, version 9.0 or higher – Bosch Video Client (BVC) –D i r e c t X 9 . 0 c – MPEG-ActiveX 5.
92 en | Using the IP Interface AutoDome Junior HD F .01U.275.803 | 6.0 | 2012.11 Installation Manual Bosch Security Systems, Inc. 11.4 Configuring the AutoDome Junior HD Camera To operate the camera in your network you must assign it a valid network IP address.
AutoDome Junior HD Using the IP Int er face | en 93 Bosch Security Systems, Inc. Installation Manual F .01U.275.803 | 6.0 | 2012.11 The AutoDome Junior HD defaults are as follows: – IP Address: 192.168.0.1 – Subnet Mask: 255.255.255.0 – Gateway IP Address: 0.
94 en | Using the IP Interface AutoDome Junior HD F .01U.275.803 | 6.0 | 2012.11 Installation Manual Bosch Security Systems, Inc. 3. Check the Always Trust box, then click YES . 4. Click the Settings link, locate d at the top of the LivePage. 5. Click the Service Settings link, located in the left pane of the Settings window.
AutoDome Junior HD Using the IP Int er face | en 95 Bosch Security Systems, Inc. Installation Manual F .01U.275.803 | 6.0 | 2012.11 8. Click the Set button to save the settings. 9. Launch another instance of Microsoft Internet Explorer. 10. Type the original IP addr ess followed by /reset (for example, http://192.
96 en | Using the IP Interface AutoDome Junior HD F .01U.275.803 | 6.0 | 2012.11 Installation Manual Bosch Security Systems, Inc. Display Stamping Various overlays or “stamps” in the video image provide important status information. The overlays provide the following information: Decoding error.
AutoDome Junior HD Using the IP Int er face | en 97 Bosch Security Systems, Inc. Installation Manual F .01U.275.803 | 6.0 | 2012.11 Maximum Number of C onnections If you do not connect, the unit may have reached its max imum number of connections.
98 en | Using the IP Interface AutoDome Junior HD F .01U.275.803 | 6.0 | 2012.11 Installation Manual Bosch Security Systems, Inc. View Con trol The View Control tab allows you to control camera functions (pan, tilt, zoom, focus, and iris ), navigate through on-screen menus and to view preset shot s.
AutoDome Junior HD Using the IP Int er face | en 99 Bosch Security Systems, Inc. Installation Manual F .01U.275.803 | 6.0 | 2012.11 3. To manually pan throughout the image area, move your cursor over any part of the live video. The image area displays a directional arrow ( , then click and hold the right mouse key to pan the camera.
100 en | Using the IP Interface AutoDome Junior HD F .01U.275.803 | 6.0 | 2012.11 Installation Manual Bosch Security Systems, Inc. Events such as the triggering or end of alarms are shown in the Event Log field. You can save these messages automatically in a file (see the AutoDome Junior online help).
AutoDome Junior HD Using the IP Int er face | en 101 Bosch Security Systems, Inc. Installation Manual F .01U.275.803 | 6.0 | 2012.11 To Enter a Keyboard Control Command: 1. Place the cursor in the Command Number field. 2. Click the desire d command number via the on-s creen keypad.
102 en | Using the IP Interface AutoDome Junior HD F .01U.275.803 | 6.0 | 2012.11 Installation Manual Bosch Security Systems, Inc. 11.5.2 Using Special Functions The AutoDome offers several special command button s on the Livepage. Scan 360 Click this button to start a cont inuous 360° pan.
AutoDome Junior HD Using the IP Int er face | en 103 Bosch Security Systems, Inc. Installation Manual F .01U.275.803 | 6.0 | 2012.11 11.6 Commissioning the AutoDome Junior Fixed Came r a The remote commissioning feature simplifies installation by allowing operators to position and zoom the camera via a remote head-end unit.
104 en | Using the IP Interface AutoDome Junior HD F .01U.275.803 | 6.0 | 2012.11 Installation Manual Bosch Security Systems, Inc. 11.7 Saving Snapshot s You can save individual images from the video sequence currently shown on th e Livepage in JPEG format on your computer's hard drive.
AutoDome Junior HD Using the IP Int er face | en 105 Bosch Security Systems, Inc. Installation Manual F .01U.275.803 | 6.0 | 2012.11 11.9 Proces sor Load If the AutoDome Junior IP is accessed via the Web browser, you will see the processor load indi cator in the top left of the window next to the manufacturer's logo.
106 en | Using the IP Interface AutoDome Junior HD F .01U.275.803 | 6.0 | 2012.11 Installation Manual Bosch Security Systems, Inc. Controlling a Playback You will see a time bar below the video image for quick orientation. A green arrow above the bar indicates the position of the image currently being play ed back within the sequence.
AutoDome Junior HD Using the IP Int er face | en 107 Bosch Security Systems, Inc. Installation Manual F .01U.275.803 | 6.0 | 2012.11 Bookmarks In addition, you can set markers in the sequences, so-called bookmarks, and leap directly to these. These bookmarks are indicated as small yellow arrows above the time interval.
108 en | Conf iguring the AutoDome Junior HD AutoDome Junior HD F .01U.275.803 | 6.0 | 2012.11 Installation Manual Bosch Security Systems, Inc. 12 Configuring the AutoDome Junior HD The SETTINGS page provides access to the configuration menu, which contains all the unit's pa rameters arranged in groups.
AutoDome Junior HD Configuring the Aut oDome Junior HD | en 109 Bosch Security Systems, Inc. Installation Manual F .01U.275.803 | 6.0 | 2012.11 2. Click one of the entries in the submenu. The Web browser opens the corresponding page. Making Changes Each configuration screen shows the current settings.
110 en | Conf iguring the AutoDome Junior HD AutoDome Junior HD F .01U.275.803 | 6.0 | 2012.11 Installation Manual Bosch Security Systems, Inc. The highest authorization level is service . After entering the correct password, you can access all the functions of the AutoDome Junior HD and change all configuration settings.
AutoDome Junior HD Configuring the Aut oDome Junior HD | en 111 Bosch Security Systems, Inc. Installation Manual F .01U.275.803 | 6.0 | 2012.11 12.2 Basic Mode: Date/Time Device date/Device time/Device time zone If there are multiple devices operating in your system or network, it is important to sync hronize their internal clocks.
112 en | Conf iguring the AutoDome Junior HD AutoDome Junior HD F .01U.275.803 | 6.0 | 2012.11 Installation Manual Bosch Security Systems, Inc. DHCP If a DHCP server is employed in the network for the dynamic assignment of IP addresses, you can activate acceptance of IP addresses automatically assigned to the AutoDome Junior HD.
AutoDome Junior HD Configuring the Aut oDome Junior HD | en 113 Bosch Security Systems, Inc. Installation Manual F .01U.275.803 | 6.0 | 2012.11 12.4 Basic Mode: Encoder Default profile You can select a profile for encodin g the video signal.
114 en | Conf iguring the AutoDome Junior HD AutoDome Junior HD F .01U.275.803 | 6.0 | 2012.11 Installation Manual Bosch Security Systems, Inc. – Modem Target bit rate: 20 kbps Maximum bit rate: 22 kbps Encoding interval: 15 .00 ips – GSM Target bit rate: 7 kbps Maximum bit rate: 8 kbps Encoding interval: 7.
AutoDome Junior HD Configuring the Aut oDome Junior HD | en 115 Bosch Security Systems, Inc. Installation Manual F .01U.275.803 | 6.0 | 2012.11 12.6 Basic Mode: Recording You can record the images from the AutoDome Junior HD on various local storage media or on an appropriately configured iSCSI system.
116 en | Conf iguring the AutoDome Junior HD AutoDome Junior HD F .01U.275.803 | 6.0 | 2012.11 Installation Manual Bosch Security Systems, Inc. Enter a unique, unambiguous name for the camera in this field. You can use both lines for this. You can use the second line for entering additional characters; these can be selected from a table.
AutoDome Junior HD Configuring the Aut oDome Junior HD | en 117 Bosch Security Systems, Inc. Installation Manual F .01U.275.803 | 6.0 | 2012.11 12.10 Passwor d An AutoDome Junior HD is gene rally pr otected by a pass word to prevent unauthorized acce ss to the unit.
118 en | Conf iguring the AutoDome Junior HD AutoDome Junior HD F .01U.275.803 | 6.0 | 2012.11 Installation Manual Bosch Security Systems, Inc. 12.11 Date/Time Date format Select your requ ired date format.
AutoDome Junior HD Configuring the Aut oDome Junior HD | en 119 Bosch Security Systems, Inc. Installation Manual F .01U.275.803 | 6.0 | 2012.11 1. First check whether the correct time zone is selected. If it is not correct, select the ap propriate time zone for the system, and cli ck the Set button.
120 en | Conf iguring the AutoDome Junior HD AutoDome Junior HD F .01U.275.803 | 6.0 | 2012.11 Installation Manual Bosch Security Systems, Inc. 12.12 Advanced Mode: W eb Interface 12.13 Appearance On this page you can adapt the appearance of the web interface and change the website language to meet your requirements.
AutoDome Junior HD Configuring the Aut oDome Junior HD | en 121 Bosch Security Systems, Inc. Installation Manual F .01U.275.803 | 6.0 | 2012.11 12.14 Liv epage Functions On this page you can adapt the Livepage functions to your requirements. You can choose from a variety of different options for displaying informati on and controls.
122 en | Conf iguring the AutoDome Junior HD AutoDome Junior HD F .01U.275.803 | 6.0 | 2012.11 Installation Manual Bosch Security Systems, Inc. Show VCA metadata When video content analysis (V CA) is activated, additional information is displayed in the live video stream.
AutoDome Junior HD Configuring the Aut oDome Junior HD | en 123 Bosch Security Systems, Inc. Installation Manual F .01U.275.803 | 6.0 | 2012.11 12.15 Logging Save event log Check this option to save event messages in a text file on your local computer.
124 en | Conf iguring the AutoDome Junior HD AutoDome Junior HD F .01U.275.803 | 6.0 | 2012.11 Installation Manual Bosch Security Systems, Inc. Reboot device Performs a reboot of the AutoDo me. There is a ten (10) second pause before the dome starts its homing phase.
AutoDome Junior HD Configuring the Aut oDome Junior HD | en 125 Bosch Security Systems, Inc. Installation Manual F .01U.275.803 | 6.0 | 2012.11 – HD High high quality / low latency Target bit rate: 5000 kbps Maximum bit rate: 10000 kbps Encoding interval: 30.
126 en | Conf iguring the AutoDome Junior HD AutoDome Junior HD F .01U.275.803 | 6.0 | 2012.11 Installation Manual Bosch Security Systems, Inc. Profile name You can enter a new name for the profile here. The name is then displayed in the list of availab le profiles in the Profile name field.
AutoDome Junior HD Configuring the Aut oDome Junior HD | en 127 Bosch Security Systems, Inc. Installation Manual F .01U.275.803 | 6.0 | 2012.11 Maximum data rate This maximum data rate is not exceeded under any circumstances. Depending on th e video quality settings for the I- and P-frames, this fact can result in individual images being skipped.
128 en | Conf iguring the AutoDome Junior HD AutoDome Junior HD F .01U.275.803 | 6.0 | 2012.11 Installation Manual Bosch Security Systems, Inc. I-frame Distance This parameter allows you to se t the intervals in which the I- frames will be coded. 0 means auto mode, whereby the video server inserts I-frames as nec essa ry.
AutoDome Junior HD Configuring the Aut oDome Junior HD | en 129 Bosch Security Systems, Inc. Installation Manual F .01U.275.803 | 6.0 | 2012.11 HD stream options: – H.264 MP 720p25/30 Fixed – H.264 MP 720p30/60 Fixed – H.264 MP 1080p Fixed SD stream options (use these options if a second H.
130 en | Conf iguring the AutoDome Junior HD AutoDome Junior HD F .01U.275.803 | 6.0 | 2012.11 Installation Manual Bosch Security Systems, Inc. Property Select one of the H.
AutoDome Junior HD Configuring the Aut oDome Junior HD | en 131 Bosch Security Systems, Inc. Installation Manual F .01U.275.803 | 6.0 | 2012.11 12.19 Privacy Masks Privacy Masking is used to block out a specific area of a scene from being viewed. Masks can be co nfigured as a gray area with four corners.
132 en | Conf iguring the AutoDome Junior HD AutoDome Junior HD F .01U.275.803 | 6.0 | 2012.11 Installation Manual Bosch Security Systems, Inc. 7. Click Set to save the priv acy mask si ze and position. An image window displays the privacy mask. 8. To hide an individual mask, select the mask number and clear the Enable check box.
AutoDome Junior HD Configuring the Aut oDome Junior HD | en 133 Bosch Security Systems, Inc. Installation Manual F .01U.275.803 | 6.0 | 2012.11 Gain Control Adjusts the automatic gain control (AGC). Automatically sets the gain to the lowest possible va lue needed to maintain a good picture.
134 en | Conf iguring the AutoDome Junior HD AutoDome Junior HD F .01U.275.803 | 6.0 | 2012.11 Installation Manual Bosch Security Systems, Inc. Auto SensUp Maximum Sets the Auto SensUp minimu m value for the AutoDome. T he Auto SensUp Min. value is the factor by which the sensitivity of the camera is increased.
AutoDome Junior HD Configuring the Aut oDome Junior HD | en 135 Bosch Security Systems, Inc. Installation Manual F .01U.275.803 | 6.0 | 2012.11 12.21 Lens Set tings Auto Focus Continuously adjusts the lens au tomatically to the correct focus for the sharpest picture.
136 en | Conf iguring the AutoDome Junior HD AutoDome Junior HD F .01U.275.803 | 6.0 | 2012.11 Installation Manual Bosch Security Systems, Inc. Iris Polarity Capability to reverse the operati on of the iris button on the controller. – Normal (default): iris contro ls operate normal ly.
AutoDome Junior HD Configuring the Aut oDome Junior HD | en 137 Bosch Security Systems, Inc. Installation Manual F .01U.275.803 | 6.0 | 2012.11 12.22 PTZ Set tings Auto Pan Speed Continuously pans the camera at a speed between right and left limit settings.
138 en | Conf iguring the AutoDome Junior HD AutoDome Junior HD F .01U.275.803 | 6.0 | 2012.11 Installation Manual Bosch Security Systems, Inc. button. The camera will not move past this limit when in Auto Pan Between Limits mode (AUX 2 ON). Tilt Up Limit Sets the upper tilt limit of the camera.
AutoDome Junior HD Configuring the Aut oDome Junior HD | en 139 Bosch Security Systems, Inc. Installation Manual F .01U.275.803 | 6.0 | 2012.11 12.24 Preposition and T ours The AutoDome Junior HD can store up to 99 preset scenes and this section allows you to defi ne the individual scenes and a preposition tour comprised of the defined scene s.
140 en | Conf iguring the AutoDome Junior HD AutoDome Junior HD F .01U.275.803 | 6.0 | 2012.11 Installation Manual Bosch Security Systems, Inc. 8. To view a scene in the preview window, select the scene in the list and click the Show scene button. 9. To view a scene from the Livepage: a.
AutoDome Junior HD Configuring the Aut oDome Junior HD | en 141 Bosch Security Systems, Inc. Installation Manual F .01U.275.803 | 6.0 | 2012.11 12.26 Miscellaneous Address Allows the appropriate dome to be operated via the numerical address in the control system.
142 en | Conf iguring the AutoDome Junior HD AutoDome Junior HD F .01U.275.803 | 6.0 | 2012.11 Installation Manual Bosch Security Systems, Inc. Record Format Select a format for audio recording. The default value is G.711. Select L16 if you want better audi o quality with higher sampling rates.
AutoDome Junior HD Configuring the Aut oDome Junior HD | en 143 Bosch Security Systems, Inc. Installation Manual F .01U.275.803 | 6.0 | 2012.11 Recording media Select the required recording media here so that you can then activate them and configur e the recording parameters.
144 en | Conf iguring the AutoDome Junior HD AutoDome Junior HD F .01U.275.803 | 6.0 | 2012.11 Installation Manual Bosch Security Systems, Inc. 1. In the Recording media section, click the iSCSI Media and Local Media tabs to display the applicable storage media in the overview.
AutoDome Junior HD Configuring the Aut oDome Junior HD | en 145 Bosch Security Systems, Inc. Installation Manual F .01U.275.803 | 6.0 | 2012.11 Formatting Storage Media You can delete all recordings on a storage medium at any time. 1. Click a storage medium in the Managed stora ge media list to select it.
146 en | Conf iguring the AutoDome Junior HD AutoDome Junior HD F .01U.275.803 | 6.0 | 2012.11 Installation Manual Bosch Security Systems, Inc. 1. Click one of the tabs to edit the corres ponding profile. 2. If necessary, click the Default button to return all settings to their default values.
AutoDome Junior HD Configuring the Aut oDome Junior HD | en 147 Bosch Security Systems, Inc. Installation Manual F .01U.275.803 | 6.0 | 2012.11 Standard profile From this field, you can select the encode r profile to be used for recording (see Section 12.
148 en | Conf iguring the AutoDome Junior HD AutoDome Junior HD F .01U.275.803 | 6.0 | 2012.11 Installation Manual Bosch Security Systems, Inc. Recording includes You can specify whether, in addition to video data and metadata (for example alarms, VC A data and serial data) should also be recorded.
AutoDome Junior HD Configuring the Aut oDome Junior HD | en 149 Bosch Security Systems, Inc. Installation Manual F .01U.275.803 | 6.0 | 2012.11 In addition to the normal week days, you can define holidays that are not in the standard weekly schedule on which recordings are to apply.
150 en | Conf iguring the AutoDome Junior HD AutoDome Junior HD F .01U.275.803 | 6.0 | 2012.11 Installation Manual Bosch Security Systems, Inc. Time periods You can change the names of the recording profile s. 1. Click a profile and then the Rename button.
AutoDome Junior HD Configuring the Aut oDome Junior HD | en 151 Bosch Security Systems, Inc. Installation Manual F .01U.275.803 | 6.0 | 2012.11 By setting Follows input 1 the unit maintains the connection that has been automatically establi shed for as long as an alarm exists on alarm input 1.
152 en | Conf iguring the AutoDome Junior HD AutoDome Junior HD F .01U.275.803 | 6.0 | 2012.11 Installation Manual Bosch Security Systems, Inc. Video transmission If the unit is operated behind a firewall, TCP (HTTP port) should be selected as the transf er protocol.
AutoDome Junior HD Configuring the Aut oDome Junior HD | en 153 Bosch Security Systems, Inc. Installation Manual F .01U.275.803 | 6.0 | 2012.11 Decoder Select a decoder of the receiver to display the alarm image. The decoder selected has an impact on the position of the image in a split screen.
154 en | Conf iguring the AutoDome Junior HD AutoDome Junior HD F .01U.275.803 | 6.0 | 2012.11 Installation Manual Bosch Security Systems, Inc. 12.38 VC A The AutoDome Junior HD contai ns an integrated video content analysis (VCA), which can detect and analyze changes in the signal on the basis of image proce ssing.
AutoDome Junior HD Configuring the Aut oDome Junior HD | en 155 Bosch Security Systems, Inc. Installation Manual F .01U.275.803 | 6.0 | 2012.11 1. To rename the file, click the icon to the right of the list field and enter the new profile name in the field.
156 en | Conf iguring the AutoDome Junior HD AutoDome Junior HD F .01U.275.803 | 6.0 | 2012.11 Installation Manual Bosch Security Systems, Inc. Motion detector (MOTION+ only) For the detector to function, th e following conditions must be met: – Analysis must be activated.
AutoDome Junior HD Configuring the Aut oDome Junior HD | en 157 Bosch Security Systems, Inc. Installation Manual F .01U.275.803 | 6.0 | 2012.11 Select Area (MOTION+ only) The areas of the image to be mo nitored by the mo tion detector can be selected.
158 en | Conf iguring the AutoDome Junior HD AutoDome Junior HD F .01U.275.803 | 6.0 | 2012.11 Installation Manual Bosch Security Systems, Inc. Sensitivity The basic sensitivity of the tam per detection can be adjusted for the environmental conditions to which the camera is subject.
AutoDome Junior HD Configuring the Aut oDome Junior HD | en 159 Bosch Security Systems, Inc. Installation Manual F .01U.275.803 | 6.0 | 2012.11 Scene too bright Activate this function if tamperi ng associated with exposure to extreme light (for instance, s hining a flashlight directly on the lens) should trigger an alarm.
160 en | Conf iguring the AutoDome Junior HD AutoDome Junior HD F .01U.275.803 | 6.0 | 2012.11 Installation Manual Bosch Security Systems, Inc. 12.39 Alarm E-Mail As an alternative to automatic connecting, alarm states can also be documented by e-mail.
AutoDome Junior HD Configuring the Aut oDome Junior HD | en 161 Bosch Security Systems, Inc. Installation Manual F .01U.275.803 | 6.0 | 2012.11 Attach JPEG from camera Click the checkbox to specify that JPEG images are sent from the camera. An enabled video input is indicated by a check mark.
162 en | Conf iguring the AutoDome Junior HD AutoDome Junior HD F .01U.275.803 | 6.0 | 2012.11 Installation Manual Bosch Security Systems, Inc. 12.41 Alarm Rules The AutoDome Junior HD features an alarm rule engine. In its simplest form, an alarm rule can define which input(s) activate which output(s).
AutoDome Junior HD Configuring the Aut oDome Junior HD | en 163 Bosch Security Systems, Inc. Installation Manual F .01U.275.803 | 6.0 | 2012.11 3. Choose one of the follo wing output commands for both Output 1 and Output 2 settings: – None: no defined command.
164 en | Conf iguring the AutoDome Junior HD AutoDome Junior HD F .01U.275.803 | 6.0 | 2012.11 Installation Manual Bosch Security Systems, Inc. Name You can enter a name for each alarm input, which is then displayed below the icon fo r the alarm input on the Livepage if configured correctly (see Section 12.
AutoDome Junior HD Configuring the Aut oDome Junior HD | en 165 Bosch Security Systems, Inc. Installation Manual F .01U.275.803 | 6.0 | 2012.11 Operations Mode Select an operating mode for the relay. For example, if you want an al arm-activated lamp to stay on after the alarm ends, select Bistable .
166 en | Conf iguring the AutoDome Junior HD AutoDome Junior HD F .01U.275.803 | 6.0 | 2012.11 Installation Manual Bosch Security Systems, Inc. Automatic IP assignment If a DHCP server is employed in the network for the dynamic assignment of IP addresses, you can activate acceptance of IP addresses automatically assigned to the AutoDome 800 Series.
AutoDome Junior HD Configuring the Aut oDome Junior HD | en 167 Bosch Security Systems, Inc. Installation Manual F .01U.275.803 | 6.0 | 2012.11 IP Address Enter the desired IP address for the AutoDome 800 Series in this field. The IP address must be valid f or the network.
168 en | Conf iguring the AutoDome Junior HD AutoDome Junior HD F .01U.275.803 | 6.0 | 2012.11 Installation Manual Bosch Security Systems, Inc. HTTP browser port Select a different HTTP browser po rt from the list if required . The default HTTP port is 80.
AutoDome Junior HD Configuring the Aut oDome Junior HD | en 169 Bosch Security Systems, Inc. Installation Manual F .01U.275.803 | 6.0 | 2012.11 Telnet support. The unit will then no longer be access ible using the Telnet protocol. Interface mode ETH If necessary, select the Ethernet link type for the ETH interface.
170 en | Conf iguring the AutoDome Junior HD AutoDome Junior HD F .01U.275.803 | 6.0 | 2012.11 Installation Manual Bosch Security Systems, Inc. User name Enter the user name you regi stered at DynDNS.org here. Password Enter the password you registered at DynDNS.
AutoDome Junior HD Configuring the Aut oDome Junior HD | en 171 Bosch Security Systems, Inc. Installation Manual F .01U.275.803 | 6.0 | 2012.11 them automatically, but only repl ies to SNMP re quests. If you enter one or two SNMP host addresses, SNMP traps are s ent automatically.
172 en | Conf iguring the AutoDome Junior HD AutoDome Junior HD F .01U.275.803 | 6.0 | 2012.11 Installation Manual Bosch Security Systems, Inc. UPnP You can activate the universal plug and play function (UPnP).
AutoDome Junior HD Configuring the Aut oDome Junior HD | en 173 Bosch Security Systems, Inc. Installation Manual F .01U.275.803 | 6.0 | 2012.11 itself and then distributes it to multiple receivers (Mu.
174 en | Conf iguring the AutoDome Junior HD AutoDome Junior HD F .01U.275.803 | 6.0 | 2012.11 Installation Manual Bosch Security Systems, Inc. unit). The AutoDome Junior HD supports multi-unicast connections for up to five simu ltaneously connected receivers.
AutoDome Junior HD Configuring the Aut oDome Junior HD | en 175 Bosch Security Systems, Inc. Installation Manual F .01U.275.803 | 6.0 | 2012.11 – Date/tim e suffix The date and time are automatically added to the file name. When setting this parameter, ensure that the unit's date and time are always corr ectly set.
176 en | Conf iguring the AutoDome Junior HD AutoDome Junior HD F .01U.275.803 | 6.0 | 2012.11 Installation Manual Bosch Security Systems, Inc. 12.51 Advanced Mode: Service 12.52 Maintenance Firmware The AutoDome Junior HD is designed in such a way that its functions and parameters can be updated with firmware.
AutoDome Junior HD Configuring the Aut oDome Junior HD | en 177 Bosch Security Systems, Inc. Installation Manual F .01U.275.803 | 6.0 | 2012.11 Configuration You can save configuration data fo r the AutoDome Junior HD on a computer and then load sa ved configuration data from a computer to the unit.
178 en | Conf iguring the AutoDome Junior HD AutoDome Junior HD F .01U.275.803 | 6.0 | 2012.11 Installation Manual Bosch Security Systems, Inc. Maintenance log You can download an internal ma intenance log from the unit to send it to Custo mer Servic e fo r support purposes.
AutoDome Junior HD K eyboar d Commands by Number | en 179 Bosch Security Systems, Inc. Installation Manual F .01U.275.803 | 6.0 | 2012.11 13 K e yboard Commands by Number Alarm Rule Output Function Key Comm No.
180 en | K eyboard Commands by Number AutoDome Junior HD F .01U.275.803 | 6.0 | 2012.11 Installation Manual Bosch Security Systems, Inc. On/Off 601 Vivid Color Toggles the vivid color option on or of f. On/Off 602 Flickerless Toggles the flickerless mode on or off.
AutoDome Junior HD Preventive Maintenance | en 181 Bosch Security Systems, Inc. Installation Manual F .01U.275.803 | 6.0 | 2012.11 14 Preve nt i ve Ma i nte n an c e The following preventive maintenance s chedule allows detection and correction of mino r faults before they become serious and cause equipment failure .
182 en | T roubleshooting AutoDome Junior HD F .01U.275.803 | 6.0 | 2012.11 Installation Manual Bosch Security Systems, Inc. 15 T roubleshoo ting If you experience difficulties operating your AutoDome Junior camera, refer to the following. If the guidelines do not enable you to solve the problem, con tact an authorized technician.
AutoDome Junior HD T roublesho oting | en 183 Bosch Security Systems, Inc. Installation Manual F .01U.275.803 | 6.0 | 2012.11 Problem Solution No Network Connection – Check all network connections – Ensure that the maximum distance between any two Ethernet connections is 100 m (328 ft) or less.
184 en | T roubleshooting AutoDome Junior HD F .01U.275.803 | 6.0 | 2012.11 Installation Manual Bosch Security Systems, Inc. 15.2 LED Diagnostics Use the following illustration to identify the LEDs (n.
AutoDome Junior HD BVIP F irmwar e Updates | en 185 Bosch Security Systems, Inc. Installation Manual F .01U.275.803 | 6.0 | 2012.11 16 BVIP Firm ware Update s The AutoDome Junior HD incorporates a network vi deo server in the IP module. The primary function of the server is to encode video and control data fo r transmission over a TCP/IP network.
186 en | BVIP F irmware Updat es AutoDome Junior HD F .01U.275.803 | 6.0 | 2012.11 Installation Manual Bosch Security Systems, Inc. 16.2 Beginning the Firmwar e Update Proce ss Use this procedure to connect to your AutoDome Junior HD and to navigate to the Firmware Update page.
187 en | Index AutoDome Junior HD F .01U.275.803 | 6.0 | 2012.11 Installation Manual Bosch Security Systems, Inc. Inde x Symbols /reset 95 A activation key 178 alarm e-mail 160 alarm inputs non-supe r.
AutoDome Junior HD Index | en 188 Bosch Security Systems, Inc. Installation Manual F .01U.275.803 | 6.0 | 2012.11 DirectX 91 Display stamping 96 displaying on-screen menus 100 drywall ceiling 24 dual .
189 en | Index AutoDome Junior HD F .01U.275.803 | 6.0 | 2012.11 Installation Manual Bosch Security Systems, Inc. M manufacturer logo 120 Media-replay 105 motion detector 154 motion detector defaults .
AutoDome Junior HD Index | en 190 Bosch Security Systems, Inc. Installation Manual F .01U.275.803 | 6.0 | 2012.11 standard recording profile values 146 storage media 143 storage medium 115 , 142 strea.
191 en | Index AutoDome Junior HD F .01U.275.803 | 6.0 | 2012.11 Installation Manual Bosch Security Systems, Inc..
192 en | Index AutoDome Junior HD F .01U.275.803 | 6.0 | 2012.11 Installation Manual Bosch Security Systems, Inc..
.
Bosch Security Systems, Inc. 850 Greenfield Road Lancaster, PA 17601 U.S.A. www.boschsecurity.com © Bosch Security Systems, Inc., 2012.
デバイスBosch Appliances VJR SERIESの購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Bosch Appliances VJR SERIESをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはBosch Appliances VJR SERIESの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Bosch Appliances VJR SERIESの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Bosch Appliances VJR SERIESで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Bosch Appliances VJR SERIESを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はBosch Appliances VJR SERIESの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Bosch Appliances VJR SERIESに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちBosch Appliances VJR SERIESデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。