BreadmanメーカーCF3102の使用説明書/サービス説明書
ページ先へ移動 of 162
CF2002/CF3102 Printer User Manual.
CF2002/CF3 102 i Welcom e Thank y ou very m uch for you r purchasi ng of t he CF2002/CF 3102 Printer. This us er manua l explain s how to op erate the p rinter and replenish its supp lies. It also gi ves so me tro ubl eshoo tin g tips as well as gen eral precau ti ons to be obse rved when o perating t he printer.
Contents ii CF 2002/CF3102 Contents 1 Introduction 1.1 Safety Information ............... ................. ................. ................. ...... 1-1 Warning and Precaut ion Symbols ................ ........... ................. ...... 1-1 Meanin g of Symbols .
Contents CF2002/CF 3102 iii 3 Before Ma king Pr ints 3.1 Compone nts and Their Functions ........... ................. ................. .. 3-1 3.2 Parts Names and Their Func tions ...................... ................. ........ 3-4 Outside o f Printer .
Contents iv CF 2002/CF3102 5 Printer Panel Message s 5.1 Message List ............. ................. ........... ................. ................. ...... 5-1 5.2 When t he Messag e “ No xxxx toner Please chan ge ” Appears .......... ...........
Contents CF2002/CF3 102 v 7.2 Care of th e Printer ......... ................. ................. ................. ............. 7-8 Cleaning ............... ................. ................ ................. ................. ........ 7- 8 Housing cover .
Contents vi CF 2002/CF3102.
1.1 Safety Informa tion 1 CF2002/CF3 102 1- 1 Introdu ction Ch apter 1 1 Introduction 1.1 Safet y Informat ion This sec tion contai ns detaile d instructions on the operation and mainten ance of this machi ne. To ach ieve optimu m utility of this d evice, a ll operato rs should ca refully read and follow t he instruc tions in t his manual.
1 1.1 Safet y Information 1-2 CF 2002/CF3 102 Introdu ction Ch apter 1 WAR NIN G • Do not modify this pr oduct, as a fire , electr ical shock, or b reakdown could r esult. If the product e mploys a lase r, the laser beam source cou ld cause blindness.
1.1 Safety Informa tion 1 CF2002/CF3 102 1- 3 Introdu ction Ch apter 1 CAUTION Conne ct the po wer cord to a n elec trical ou tlet that is equi pped with a grou nding te rminal. • Do not use flamma ble spra ys, liq uids, or gases nea r this pr oduct, as a fire cou ld result.
1 1.1 Safet y Information 1-4 CF 2002/CF3 102 Introdu ction Ch apter 1 Precau tions for Routine Use FCC PART 15 - RADIO FREQUENCY DEVICES (F or U.S.A. Users) NOTE: Thi s equipmen t has been tested an d found to comply with the limi ts for a Class A digital de vice, pursu ant to P art 15 of the FCC Rul es.
1.1 Safety Informa tion 1 CF2002/CF3 102 1- 5 Introdu ction Ch apter 1 CE Marking (Declaration of Conformity) for Use rs of the Europe an Union (EU) This pro duct compl ies with th e following EU directiv es: 89/336/EE C, 73/23/ EEC and 93/68 /EEC directives .
1 1.2 Expla nation of Man ual Conve ntions 1-6 CF 2002/CF3 102 Introdu ction Ch apter 1 1.2 Explanation of Manual Conventions The marks and te xt formats used in this manual are desc ribed belo w. WARNING Failure to observe ins tructions highl ighted in thi s manner may re sult in fatal or critical injuries.
1.3 Explan ation of Ba sic Conce pts 1 CF2002/CF3 102 1- 7 Introdu ction Ch apter 1 1.3 Explanation of Basic Concepts The use of words an d symbo ls in this m anual are ex plained b elow.
1 1.3 Explan ation of Bas ic Conce pts 1-8 CF 2002/CF3 102 Introdu ction Ch apter 1 “ Width ” and “ Length ” Whenev er paper di mension s are men tioned in this m anual, the first value always refe rs to the width of the pap er (shown as “ Y ” i n the illust ration) and the seco nd to the l ength (sho wn as “ X ” ).
1.4 Energy Star ® 1 CF2002/CF3 102 1- 9 Introdu ction Ch apter 1 1.4 Ene rgy Star ® As an ENERGY STAR ® Partner, we have d etermined that thi s machi ne meets the ENERGY STAR ® Gu idelines for energy eff iciency .
1 1.5 T rademarks and Regis tered T rademarks 1-10 CF 2002/CF3 102 Introdu ction Ch apter 1.
2.1 Installat ion Precaution s 2 CF2002/CF3 102 2- 1 Precauti ons Chap ter 2 2 Precautions 2.1 Installation Precau tions Installatio n Site To ensu re utmo st safety and prev ent possibl e malfunc tions, in stall the printer in a locat ion that meet s the f oll owin g requ ir emen ts.
2 2.1 I nst all ation Prec aut ion s 2-2 CF 2002/CF3 102 Precauti ons Chap ter 2 Space R equirements To ensu re easy prin ter operatio n, supply replacement, and mainte nance, ad here to the r ecommen ded space re quiremen ts detaile d below .
2.2 Operat ion Precautions 2 CF2002/CF3 102 2- 3 Precauti ons Chap ter 2 2.2 Operation Precautions Oper atin g envi ron ment The env ironmental re quirement s for corre ct operatio n of the p rinter are as follows.
2 2.2 Op er ation Prec aut ions 2-4 CF 2002/CF3 102 Precauti ons Chap ter 2 CAUTION If the ventilation d uct at the top of the printer becom es blocked, the inside o f the printer w ill accumu late heat, resultin g in a malfun ction or fire. ➜ Do not place an y object s over the venti lation du ct.
2.2 Operat ion Precautions 2 CF2002/CF3 102 2- 5 Precauti ons Chap ter 2 CAUTION Precautions for handling ton er: ➜ Be carefu l not to s pill toner inside the p rinter or get toner on y our cloth es or hand s. ➜ If yo ur hands be come so iled with to ner, imme diately w ash them with soap and water.
2 2.2 Op er ation Prec aut ions 2-6 CF 2002/CF3 102 Precauti ons Chap ter 2.
3.1 Com ponents and T heir Func tions 3 CF2002/CF3 102 3- 1 Before M aking Pr ints Chapter 3 3 Before Making Prints 3.1 Components and Their Functions No. Part Name Description 1 Printer Prints th e print data tran smitted f rom th e print er cont roller Referred to as th e printe r throu ghout the manua l.
3 3.1 Com ponents and Their Func tions 3-2 CF 2002/CF3 102 Before M aking Pr ints Chapter 3 No. Part Name Description 7 Duplex U nit AD- 14 (opti onal) Tu rns over p rints, a llowing double -sided pri nts to be made automatica lly.
3.1 Com ponents and T heir Func tions 3 CF2002/CF3 102 3- 3 Before M aking Pr ints Chapter 3 * T he inte rna l opti ons ar e not sh own. Supplem ental Table 1 11 Punch KIT PK-4 (optio nal)* Allows t h.
3 3.2 Parts Names and Their Func tions 3-4 CF 2002/CF3 102 Before M aking Pr ints Chapter 3 3.2 Parts Names and T heir Funct ions Outside of Prin ter Pl ain Pl ain Thick1 Thick1 Thick2 Thick3 Thick3 T.
3.2 Parts Nam es and Th eir Function s 3 CF2002/CF3 102 3- 5 Before M aking Pr ints Chapter 3 No. Part Name Description 1 Right- side doo r Opened w hen cl earing misfeed s (See p . 5-18 and p. 5- 22.) 2 Manual b ypass tr ay Used fo r manual feedi ng of pap er The pap er is fed one sh eet at a time.
3 3.2 Parts Names and Their Func tions 3-6 CF 2002/CF3 102 Before M aking Pr ints Chapter 3 Ins ide o f Pri nt er No. Part Name Description 1 Upper ri ght-side door Opened w hen rep lacin g the fusi ng unit or cleari ng mis feeds (See p.
3.2 Parts Nam es and Th eir Function s 3 CF2002/CF3 102 3- 7 Before M aking Pr ints Chapter 3 Supplies a nd Parts No. Part Name Description 1 Toner Cartridg e There a re fou r toner ca rtridge s: cyan (C ), magen ta (M) , yellow (Y) a nd blac k (BK ).
3 3.2 Parts Names and Their Func tions 3-8 CF 2002/CF3 102 Before M aking Pr ints Chapter 3 Options Duplex Unit (AD-14) Paper Fee d Unit (PF-118 ) Finish er (FN-8) No. Part Name Description 1 Duplex unit doo r Opened w hen cl earing a paper m isfeed within the du plex unit No.
3.2 Parts Nam es and Th eir Function s 3 CF2002/CF3 102 3- 9 Before M aking Pr ints Chapter 3 Large Cap acity Cabi net (PF-121) Finish er (FN-116) Option Tray (JS-100) No. Part Name Description 11 3rd dra wer Holds up to 2,5 00 sheets o f pape r (See p .
3 3.3 Na mes of Prin ter Panel Pa rts and The ir Functions 3-10 CF 2002/CF3 102 Before M aking Pr ints Chapter 3 3.3 Names of Printer Panel Parts and Their Functions Names of P rinter Panel Parts a nd Their Func tions 2 3 56 7 8 1 4 No.
3.4 Selecti ng the R equired Func tion 3 CF2002/CF3 102 3-11 Before M aking Pr ints Chapter 3 3.4 Selecting the Required Function In order t o select functions, th e [Functions ] menu m ust be selec ted. The f ollowing fu nctions can be sele cted fr om the [Fu nctions] menu in t he printer panel.
3 3.4 Sele cting the Required Function 3-12 CF 2002/CF3 102 Before M aking Pr ints Chapter 3 Engine Setu p Items Resume Printing Shut Down Restart Server Shut Down System Reboot System Run Setup This command is used to enter the Setup mode of the printer controller .
3.4 Selecti ng the R equired Func tion 3 CF2002/CF3 102 3-13 Before M aking Pr ints Chapter 3 To set the Engine Setup It ems For exam ple: Low-Po wer Mode 1 Select “ En gine Setup ” an d press the [Set] key. 2 “ Login Admi n Mode ” (login screen for the sett ing mode used by the tech nical represen tative) is displayed .
3 3.4 Sele cting the Required Function 3-14 CF 2002/CF3 102 Before M aking Pr ints Chapter 3 4 Select “ On ” or “ Off ” usi ng or and press t he [Set] key. 5 If “ On ” is sel ected, specify the lengt h of time until the printer a uotmatic ally enters th e Low-Power Mode .
3.5 Turning the Printer On and O ff 3 CF2002/CF3 102 3-15 Before M aking Pr ints Chapter 3 3.5 Turning the Printer On and Off To turn on the printer ➜ Set the po wer switch to “ 1 ” . To turn the p rinter off ➜ Set the po wer switch to “ 2 ” .
3 3.6 Turning the Printer Controller O n and Of f 3-16 CF 2002/CF3 102 Before M aking Pr ints Chapter 3 3.6 Turning the Printer Controller On and Off To turn on th e printer controlle r ➜ Set the po wer switch to “ 1 ” . After the prin ter controller is turned on, the control ler is init ialized.
3.6 Turning the Printer Controller O n and Of f 3 CF2002/CF3 102 3-17 Before M aking Pr ints Chapter 3 2 Press or until “ Fu nctions Shut Down ” appears , and then press the [Set] key. 3 Press onc e to display “ Shut Down System ” , an d then pres s the [Set] key to begin s hutting do wn the sys tem.
3 3.7 To tal Coun ter 3-18 CF 2002/CF3 102 Before M aking Pr ints Chapter 3 3.7 Total Counter The total counter can be pri nted out b y followin g the proce dure belo w. To print the total counter 1 Check that “ Info XXXX ” a ppears in the displa y, and then pres s the [Menu] key in the print er panel.
3.7 Total Counte r 3 CF2002/CF3 102 3-19 Before M aking Pr ints Chapter 3 4 The mete r counter is printed out . (Refer to page 4-7 for L oading Pap er.
3 3.8 Unit Check 3-20 CF 2002/CF3 102 Before M aking Pr ints Chapter 3 3.8 U nit Check The life counter f or the units can be printed out by following the proced ure below. 1 Check that “ Info XXXX ” a ppears in the displa y, and then pres s the [Menu] key in the print er panel.
3.8 Unit Check 3 CF2002/CF3 102 3-21 Before M aking Pr ints Chapter 3 4 The life counter i s printed o ut. (Refer to page 4-7 for Loadin g Paper.).
3 3.8 Unit Check 3-22 CF 2002/CF3 102 Before M aking Pr ints Chapter 3.
4.1 Paper Specific ations 4 CF2002/CF3 102 4- 1 Loadin g Paper Chapter 4 4 Loading Paper 4.1 Paper Specifica tions Use p aper that mee ts the following s pecificati ons. Paper Type s Pape r Ty pe Plain Pape r Thick Paper 1 Thick Paper 2 Thick Paper 3 Weight ( lbs.
4 4.1 Pape r Specific ations 4-2 CF 2002/CF3 102 Loadin g Paper Chapter 4 Paper Sizes Non-st andard paper: Standard pap er: Paper S ourc e Paper Width Paper Len gth Manual bypass tray 3-9/16 in.
4.1 Paper Specific ations 4 CF2002/CF3 102 4- 3 Loadin g Paper Chapter 4 Paper Capac ity *1 The pape r feed unit and large capacit y cabine t are optio nal. *2 The pape r size s hould be cha nged by y our author ized serv ice represen tative. Paper S ize Paper S ource, Etc.
4 4.1 Pape r Specific ations 4-4 CF 2002/CF3 102 Loadin g Paper Chapter 4 ✎ Note The f ollowing ty pes of pa per shoul d not be u sed, other wise decre ased prin t quality or paper m isfeeds ma y occur.
4.2 Print Area 4 CF2002/CF3 102 4- 5 Loadin g Paper Chapter 4 4.2 Print Area Any part of the ima ge within th e area ind icated belo w is not printed. A margin 0.2 inch (5 mm) from th e leading ed ge of the p aper (A) A margin 0.2 inch (5 mm) from th e trailing edg e of the pa per (B) A margin 0.
4 4.4 Auto maticall y Selecti ng the Pape r Source 4-6 CF 2002/CF3 102 Loadin g Paper Chapter 4 4.4 Automatically Selecting the Paper Source If the selected p aper drawer ru ns out of p aper while a p.
4.5 Loading Paper 4 CF2002/CF3 102 4- 7 Loadin g Paper Chapter 4 4.5 Load ing Paper Loading Pa per Into the 1st Drawer 1 Pull out the paper draw er for the 1st dr awer . 2 Press do wn on the pa per-lifting plat e unt il it lock s into plac e. ✎ Note Be car eful not to touc h the sur- face of t he pa per take -up r oll er with y our hands.
4 4.5 Loadi ng Paper 4-8 CF 2002/CF3 102 Loadin g Paper Chapter 4 5 Load the pap er into the draw er so that the side of th e paper to be prin ted onto ( the si de f acing up when the pac kage was un- wrappe d) faces u p. 6 When making manual d ouble-sid - ed prints , load th e paper so that the sec ond side (the blank side ) face s up.
4.5 Loading Paper 4 CF2002/CF3 102 4- 9 Loadin g Paper Chapter 4 ✎ Tip When loadin g 4 × 6 L (A6) cards, l oad them with the shorter s ide as the l eading edge, as shown.
4 4.5 Loadi ng Paper 4-10 CF 2002/CF3 102 Loadin g Paper Chapter 4 ✎ Note Do not load env elopes c ross- wise, as shown. ✎ Tip When loa ding ove rhead pr o- jector tra nsparenc ies, load them with the longe r side as the lead ing edge, as show n. ✎ Note Do no t load overh ead proje ctor transpare ncies leng thwise.
4.5 Loading Paper 4 CF2002/CF3 102 4-11 Loadin g Paper Chapter 4 7 If paper of a non-stand ard size ha s been lo aded, sli de the late ral guides against t he edges of the loaded pap er. 8 Close the paper draw er. 9 Turn the m edia typ e select ion dial to th e setting for the typ e of paper loaded.
4 4.5 Loadi ng Paper 4-12 CF 2002/CF3 102 Loadin g Paper Chapter 4 Setting the Paper Size for th e 1st Drawer 1 Check that “ Info XXXX ” a ppears in the displa y, and then pres s the [Menu] key in the print er panel. 2 Press or until “ Engin e Setup ” appea rs, and then press the [Se t] key.
4.5 Loading Paper 4 CF2002/CF3 102 4-13 Loadin g Paper Chapter 4 4 Check that “ Tray 1 Setup ” appears i n the displa y windo w and press the [Set] key . 5 Press or and se lect either Auto, Inch, or Metric and press the [Set] k ey. 6 Press or until the d esired pap er size appears , and then press the [Set] key.
4 4.5 Loadi ng Paper 4-14 CF 2002/CF3 102 Loadin g Paper Chapter 4.
4.5 Loading Paper 4 CF2002/CF3 102 4-15 Loadin g Paper Chapter 4 Loading Pa per Into the 2nd Drawer or a Paper Fe ed Unit 1 Pull out the paper draw er. 2 Press do wn on the pa per-lifting plat e unt il it lock s into plac e. ✎ Note Be car eful not to touc h the sur- face of t he pa per take -up r oll er with y our hands.
4 4.5 Loadi ng Paper 4-16 CF 2002/CF3 102 Loadin g Paper Chapter 4 5 Load the pap er into the draw er so that the side of th e paper to be prin ted onto ( the si de f acing up when the pac kage was un- wrappe d) faces u p. ✎ Note If the pap er is cur led, flatte n it before lo ading it.
4.5 Loading Paper 4 CF2002/CF3 102 4-17 Loadin g Paper Chapter 4 Loading Pa per Into the La rge Capacity Cab inet 1 Pull out the paper draw er. 2 Load pap er in to th e right side of the drawer so that the fron t side of the paper (the si de facing up wh en the pack age was un wrappe d) faces up.
4 4.5 Loadi ng Paper 4-18 CF 2002/CF3 102 Loadin g Paper Chapter 4 Loading Pa per Into the M anual Bypass Tray Paper can be fed manually thr ough the manua l bypass tray if you wish to print onto paper th at is not l oaded into a drawer, o r if you wis h to print onto spec ial pape r.
4.5 Loading Paper 4 CF2002/CF3 102 4-19 Loadin g Paper Chapter 4 ✎ Tip When loadin g 4 × 6 L (A6) cards, l oad them with the shorter s ide as the l eading edge, as shown.
4 4.5 Loadi ng Paper 4-20 CF 2002/CF3 102 Loadin g Paper Chapter 4 ✎ Note Do not load env elopes c ross- wise, as shown. ✎ Tip When loa ding Overhe ad Pro- jector tra nsparenc ies, load them with the longe r side as the lead ing edge, as show n. ✎ Note Do not load Overhe ad Projec- tor transp arencies lengthwis e, as sh own.
4.5 Loading Paper 4 CF2002/CF3 102 4-21 Loadin g Paper Chapter 4 4 Adjust th e paper gu ides to fit th e size o f paper that is loade d. 5 Lightly slide the paper i nto the f eed slot as much as possib le so that the edge of the pap er is fed i nto the print er.
4 4.5 Loadi ng Paper 4-22 CF 2002/CF3 102 Loadin g Paper Chapter 4.
5.1 Message List 5 CF2002/CF3 102 5- 1 Printer Panel M essa ges Ch apter 5 5 Printer P anel Messages 5.1 Message Lis t When a mes sage appears in the printer panel display, refer to the section for det ails about th e message a nd the ac tion to be taken.
5 5.1 Mes sage List 5-2 CF 2002/CF3 102 Printer Panel M essa ges Ch apter 5 Low-po wer mo de The pri nter has entere d Energy Sa ver mo de. • To cance l Energy Saver mode, send a prin t job, or open an d clos e a cover.
5.1 Message List 5 CF2002/CF3 102 5- 3 Printer Panel M essa ges Ch apter 5 xxxx toner nearly empty The tone r for t he indica ted colo r will soon be empty. Prepare to repl ace the to ner cartridg e with a new one. xxxx unit near life limit The indica ted unit w ill soon reach the e nd of i ts li fe.
5 5.2 When th e Message “ No xxxx t oner Please c hange ” Appears 5-4 CF 2002/CF3 102 Printer Panel M essa ges Ch apter 5 5.2 When the Message “ No xx xx toner P lease change ” Appears Messag es and Actions The tone r for the in dicated c olor is emp ty.
5.2 When th e Message “ No xxxx t oner Please c hange ” Appears 5 CF2002/CF3 102 5- 5 Printer Panel M essa ges Ch apter 5 To repl ace the tone r cartridge The pr ocedure for re placing any of the ton er cartridges (yellow (Y), magenta (M ), cyan (C) or black ( Bk)) is the same.
5 5.2 When th e Message “ No xxxx t oner Please c hange ” Appears 5-6 CF 2002/CF3 102 Printer Panel M essa ges Ch apter 5 3 Prepare th e new ton er cartridge.
5.2 When th e Message “ No xxxx t oner Please c hange ” Appears 5 CF2002/CF3 102 5- 7 Printer Panel M essa ges Ch apter 5 6 Position the toner cartridge a s shown , and then insert it into its compart ment.
5 5.3 W hen the Me ssag e “ No Staples ” Appears 5-8 CF 2002/CF3 102 Printer Panel M essa ges Ch apter 5 5.3 When the Messag e “ No Staples ” Appears When fin isher FN -116 or FN-8 is instal led and i s about to run out of sta ples, the messa ge shown a bove app ears.
5.3 When th e Message “ No Staples ” Appears 5 CF2002/CF3 102 5- 9 Printer Panel M essa ges Ch apter 5 3 Pull the staple ho lder out to ward you. 4 Remove the em pty staple cartridge . 5 Insert the new stap le cartridge in to the stap le holder, and then carefull y pull o ut the stop per.
5 5.3 W hen the Me ssag e “ No Staples ” Appears 5-10 CF 2002/CF3 102 Printer Panel M essa ges Ch apter 5 6 Insert th e refilled staple h older until it locks i nto pl ace.
5.3 When th e Message “ No Staples ” Appears 5 CF2002/CF3 102 5-11 Printer Panel M essa ges Ch apter 5 To repl ace the stap le cartridge for FN-8 ✎ Note Be sure to replace the staple cartridge on ly after the message a ppears, other wise the m achine m ay be dam aged.
5 5.3 W hen the Me ssag e “ No Staples ” Appears 5-12 CF 2002/CF3 102 Printer Panel M essa ges Ch apter 5 3 Slowly pull out the stapl er unit as far as po ssible. 4 Turn d ial clockwise until the staple cartridge m oves to a posit ion from whe re it c an be removed.
5.3 When th e Message “ No Staples ” Appears 5 CF2002/CF3 102 5-13 Printer Panel M essa ges Ch apter 5 6 Pres s the b utto n marke d “ PU S H ” on the s ide of the staple cartri dge. The staple ca se is released . 7 Pull up t he sta ple case .
5 5.3 W hen the Me ssag e “ No Staples ” Appears 5-14 CF 2002/CF3 102 Printer Panel M essa ges Ch apter 5 9 Refill th e staple c ase with sta ples. ❍ Fully i nsert th e staple case as far as po ssible. 10 Press t he sta ple ca se down . 11 Peel off t he tape fro m the sta ples.
5.3 When th e Message “ No Staples ” Appears 5 CF2002/CF3 102 5-15 Printer Panel M essa ges Ch apter 5 12 Insert the staple cartri dge, maki ng sure the tab s on the cartridge slide along the rails in the c ompartment. 13 Fully i nsert the sta ple cartridge so that it l ocks int o place.
5 5.4 W hen the Me ssag e “ Paper jam at Jx ” Appears 5-16 CF 2002/CF3 102 Printer Panel M essa ges Ch apter 5 5.4 When the Messag e “ Paper jam a t Jx ” Appear s If a paper misfe ed or a s taple jam occurs du ring printi ng, the m essage sho wn below appears .
5.4 When th e Message “ Paper jam a t Jx ” Appears 5 CF2002/CF3 102 5-17 Printer Panel M essa ges Ch apter 5 Codes and Paper Mis feed Locations Check the label a ffixed to the front do or for instr uctions o n the locati on where the paper m isfeed occu rred.
5 5.4 W hen the Me ssag e “ Paper jam at Jx ” Appears 5-18 CF 2002/CF3 102 Printer Panel M essa ges Ch apter 5 To cl ear a paper m isfeed in the manual bypa ss tray 1 Pull up the lock rele ase lever to open t he ri ght -side doo r.
5.4 When th e Message “ Paper jam a t Jx ” Appears 5 CF2002/CF3 102 5-19 Printer Panel M essa ges Ch apter 5 To clear a paper misfee d in the duplex u nit 1 Open th e duplex uni t door. 2 Careful ly pull out the paper. 3 Close the duplex unit door.
5 5.4 W hen the Me ssag e “ Paper jam at Jx ” Appears 5-20 CF 2002/CF3 102 Printer Panel M essa ges Ch apter 5 To cl ear a paper m isfeed in the paper draw er 1 Open th e lower right-s ide door of the pape r drawer begi n used. 2 Turn the gr een wheels to fe ed the paper so that it c an be eas ily removed.
5.4 When th e Message “ Paper jam a t Jx ” Appears 5 CF2002/CF3 102 5-21 Printer Panel M essa ges Ch apter 5 To clear a paper mi sfeed in the large capaci ty cabinet 1 Open th e right-si de door of t he large ca pacity c abinet. 2 Turn the gre en dial in the directi on of the arro w to feed ou t the paper.
5 5.4 W hen the Me ssag e “ Paper jam at Jx ” Appears 5-22 CF 2002/CF3 102 Printer Panel M essa ges Ch apter 5 To clear a paper m isfeed inside the printer 1 Pull out the paper d rawer bei ng used, an d then remov e any paper remaini ng in the drawer.
5.4 When th e Message “ Paper jam a t Jx ” Appears 5 CF2002/CF3 102 5-23 Printer Panel M essa ges Ch apter 5 5 Pull out any paper caught in the image t ransfer roll er sectio n. CAUTION Decreas ed print quality m ay result if the surface of the image transfer belt or the im age transfer roller is touc hed.
5 5.4 W hen the Me ssag e “ Paper jam at Jx ” Appears 5-24 CF 2002/CF3 102 Printer Panel M essa ges Ch apter 5 6 Pull out any pape r caught in the fusing uni t. 7 Grasp the upp er right-side doo r as shown , and then carefully open the door complete ly whi le making sure to s upport it.
5.4 When th e Message “ Paper jam a t Jx ” Appears 5 CF2002/CF3 102 5-25 Printer Panel M essa ges Ch apter 5 CAUTION The area a round the f using unit is extremely hot.
5 5.4 W hen the Me ssag e “ Paper jam at Jx ” Appears 5-26 CF 2002/CF3 102 Printer Panel M essa ges Ch apter 5 CAUTION The ar ea around the fusing unit is extremely ho t. ➜ Touching anythi ng other than the indic ated leve rs and di als may re sult in b urns.
5.4 When th e Message “ Paper jam a t Jx ” Appears 5 CF2002/CF3 102 5-27 Printer Panel M essa ges Ch apter 5 To clear a paper mi sfeed in finis her FN-116 1 Slide the finisher away from t he prin ter . 2 Open the hor izontal trans port unit cover , and then r emove any paper.
5 5.4 W hen the Me ssag e “ Paper jam at Jx ” Appears 5-28 CF 2002/CF3 102 Printer Panel M essa ges Ch apter 5 5 Turn knobs F N5 cl ockwi se at t he same ti me.
5.4 When th e Message “ Paper jam a t Jx ” Appears 5 CF2002/CF3 102 5-29 Printer Panel M essa ges Ch apter 5 9 Open u pper cove r FN1. CAUTION Metallic parts on the inside of upper cove r FN1 are very hot. ➜ Touchin g anythin g other tha n the pape r within the area aroun d the fusing unit may result i n burns.
5 5.4 W hen the Me ssag e “ Paper jam at Jx ” Appears 5-30 CF 2002/CF3 102 Printer Panel M essa ges Ch apter 5 13 If the Option tray is insta lled: Open th e Option tray . 14 Remo ve any misfed pap er. 15 Close the Option tray. 16 Whil e holding misfeed -clearing guide FN 6 open, pull out a ny paper.
5.4 When th e Message “ Paper jam a t Jx ” Appears 5 CF2002/CF3 102 5-31 Printer Panel M essa ges Ch apter 5 To clear a paper mi sfeed in finis her FN-8 1 Slide the finisher away from t he prin ter . 2 Open th e cover of th e horizont al transport unit.
5 5.4 W hen the Me ssag e “ Paper jam at Jx ” Appears 5-32 CF 2002/CF3 102 Printer Panel M essa ges Ch apter 5 5 Turn misfee d- clear ing di al clockwi se u ntil t he re moval indic ato r is co mple tely blue . ❍ If the dia l is turned to o far, turn it coun terclockwise to adjus t it.
5.4 When th e Message “ Paper jam a t Jx ” Appears 5 CF2002/CF3 102 5-33 Printer Panel M essa ges Ch apter 5 9 Open th e feed gui de for the finishe r, and then remove any paper. 10 Open th e transpor t guide, an d then pul l out any paper in t he trans port secti on.
5 5.4 W hen the Me ssag e “ Paper jam at Jx ” Appears 5-34 CF 2002/CF3 102 Printer Panel M essa ges Ch apter 5 12 Close the front d oor of the f inisher. ✎ Note Be car eful that your f inger s are not pinc hed when th e front door is cl osed . 13 Slide the finishe r back ag ainst the prin ter.
5.4 When th e Message “ Paper jam a t Jx ” Appears 5 CF2002/CF3 102 5-35 Printer Panel M essa ges Ch apter 5 To clear jammed st aples in FN-1 16 1 Slide the finisher away from t he prin ter . 2 Turn the d ial to the left in order t o positio n the stap ler at the center.
5 5.4 W hen the Me ssag e “ Paper jam at Jx ” Appears 5-36 CF 2002/CF3 102 Printer Panel M essa ges Ch apter 5 4 Push the staple h older guid e up, and then pull out one sheet of stapl es. 5 Move t he guide back to its origi nal posit ion . 6 Insert th e staple holder unti l it locks i nto place .
5.4 When th e Message “ Paper jam a t Jx ” Appears 5 CF2002/CF3 102 5-37 Printer Panel M essa ges Ch apter 5 To clear jammed st aples in FN-8 1 Slide the finisher away from t he prin ter . 2 Open th e cover of th e horizont al transport unit. 3 Remove any paper, and then close the cover of the hori zontal transport unit.
5 5.4 W hen the Me ssag e “ Paper jam at Jx ” Appears 5-38 CF 2002/CF3 102 Printer Panel M essa ges Ch apter 5 5 Open the front door of the finisher. 6 Turn misfee d- clear ing di al clockwi se u ntil t he re moval indic ato r is co mple tely blue .
5.4 When th e Message “ Paper jam a t Jx ” Appears 5 CF2002/CF3 102 5-39 Printer Panel M essa ges Ch apter 5 8 Open th e transpor t guide, an d then pul l out any paper in t he trans port secti on. ✎ Note If the pap er cannot easily b e pulled o ut, stop tr ying to pu ll it out.
5 5.4 W hen the Me ssag e “ Paper jam at Jx ” Appears 5-40 CF 2002/CF3 102 Printer Panel M essa ges Ch apter 5 11 Turn misfee d- clear ing di al clock wise until the cartri dge remova l indicat ors are ali gned. The stap le ca rtridge mo ves to a posit ion from whe re it c an be removed.
5.4 When th e Message “ Paper jam a t Jx ” Appears 5 CF2002/CF3 102 5-41 Printer Panel M essa ges Ch apter 5 14 Pull out to ward you the tw o staple s jammed at the en d of the st aple cartridge . ✎ Note Be sure to remo ve two st aple s, otherwi se stapl ing canno t continu e correctly.
5 5.5 When the Mess age “ Punch du st full Ple ase change ” Appears 5-42 CF 2002/CF3 102 Printer Panel M essa ges Ch apter 5 5.5 When the Messag e “ Punch dust full Please change ” Appears If .
5.5 When th e Message “ Punch dus t full Plea se chang e ” Appears 5 CF2002/CF3 102 5-43 Printer Panel M essa ges Ch apter 5 3 Empty th e container. 4 Insert th e hole-pun ch wast e contain er into its original po sition. 5 Slide the fi nisher bac k agains t the prin ter .
5 5.6 Whe n the Mes sage “ Service Code Cxxxx ” Appears 5-44 CF 2002/CF3 102 Printer Panel M essa ges Ch apter 5 5.6 When the Message “ Ser vice Code Cxxxx ” Appears When the messag e shown below appe ars in the p rinter p anel disp lay, a ma lfunctio n has oc curred withi n this printe r.
5.7 When th e Message “ xxxx un it near lif e limit ” Ap pears 5 CF2002/CF3 102 5-45 Printer Panel M essa ges Ch apter 5 5.7 When the Message “ xxxx unit near life limit ” Appears When it is almos t time to replace a un it within this prin ter, a messa ge like t he one shown be low app ears in the pr inter panel .
5 5.8 W hen the Mes sage “ Near tr ouble ## / ## ” Appears 5-46 CF 2002/CF3 102 Printer Panel M essa ges Ch apter 5 5.8 When the Messag e “ Near t rouble ## / ## ” Appears When the messag e shown be low appears in the pr inter panel display , image stabil ization a nd printin g function s for the p rinter hav e become unstable .
6.1 Impr oving Print Q uality 6 CF2002/CF3 102 6- 1 Troubles hooti ng Chapter 6 6 Troubleshoo ting 6.1 Improving Print Quality Symptom Cause Act ion The imag e is t oo light. The sett ing in th e printe r drive r is not set p roperly. Adjust the s etting in the printe r driver to the desire d level.
6 6.1 Impro ving Print Quality 6-2 CF 2002/CF3 102 Troubles hooti ng Chapter 6 Inconsist ent ima ge den sity. The imag ing uni t requi res repla cement . Contac t your tech nical represe ntative. The i mage tran sfer be lt unit requi res replace ment.
6.1 Impr oving Print Q uality 6 CF2002/CF3 102 6- 3 Troubles hooti ng Chapter 6 Black pag es The ima ging un it requir es repla cement . Contac t your tech nical represe ntative. Blank pa ges The ima ging un it requi res repla cement . Contac t your tech nical represe ntative.
6 6.1 Impro ving Print Quality 6-4 CF 2002/CF3 102 Troubles hooti ng Chapter 6.
7.1 Specifica tions 7 CF2002/CF3 102 7- 1 Appendi x Chapter 7 7 Appendix 7.1 Specif icati ons Printer CF2002 /CF3102 Specification Type De sktop Plat en Stat ionar y Photo co nductor O PC Printing sys.
7 7.1 Specif ications 7-2 CF 2002/CF3 102 Appendi x Chapter 7 Lost image Leadi ng edge: 0.2 inch (5 mm ) Trailing edge: 0.2 in ch (5 mm) Rear edg e: 0.2 inch (5 mm) Font ed ge: 0.2 inch (5 mm) Firs t prin t (CF20 02) Full co lor: Less th an 14.1 seconds Black: Le ss than 7.
7.1 Specifica tions 7 CF2002/CF3 102 7- 3 Appendi x Chapter 7 Duplex Unit AD-14 Paper F eed Unit PF-118 Specification Paper type P lain pa per (1 7 to 24 l bs.
7 7.1 Specif ications 7-4 CF 2002/CF3 102 Appendi x Chapter 7 Large Capacity Cabin et PF-121 Finisher FN-8 Specification Paper t ype Plain pa per (1 7 to 24 lbs. or 64 to 90 g /m 2 ) Paper s ize ( For Inch) Letter C ( 8-1/2 × 11 L) (For Me tri c) A4 C, B5 C Paper c apacity 2,500 sheets (21-1/ 4 lbs.
7.1 Specifica tions 7 CF2002/CF3 102 7- 5 Appendi x Chapter 7 Pape r size P aper o utput t ray: (For Inch) “ Non-sort ” setting: I nvoice L /C (5-1/2 × 8-1/2 L/ C), Letter L /C (8-1/2 × 11 L/C),.
7 7.1 Specif ications 7-6 CF 2002/CF3 102 Appendi x Chapter 7 Finisher FN-1 16 Specification No. of b ins Non-sort tra y, Elevated tray Settings “ Non-sor t ” , “ Sort ” , “ Group ” and “ Staple ” setti ngs Paper t ype Non-sort tray: “ Non-sort ” setting: P lain pa per (17 t o 24 lb s.
7.1 Specifica tions 7 CF2002/CF3 102 7- 7 Appendi x Chapter 7 Option Tra y JS-100 Specification Setting Option Tray Paper type P lain pa per (1 7 to 24 l bs.
7 7.2 C are of the Printe r 7-8 CF 2002/CF3 102 Appendi x Chapter 7 7.2 Care of the Pr inter Cleaning Set the p ower switch of th e printer to “ O ” before cl eaning it . Housin g cover ➜ Clean the surfac e of the h ousing cover by wipi ng it with a soft cloth dampen ed with a mild househo ld detergen t.
7.2 Care o f the Printer 7 CF2002/CF3 102 7- 9 Appendi x Chapter 7 Paper take- up roller ➜ Clean the paper tak e-up roller by wiping it with a soft , dry cloth. Electros tatic charger If the el ectrostati c charge r is dirty, streaks will appea r though the prints.
7 7.3 Consumabl es 7-10 CF 2002/CF3 102 Appendi x Chapter 7 7.3 Consumables In or der to mai ntain the con dition of this mac hine, the following c onsuma bles are needed . For best print qual ity, we recommend t hat the sp ecified sup plies be used. For infor mation on or for purc hasing s upplies, contact you r nearest te chnical represen tative.
7.3 Consumabl es 7 CF2002/CF3 102 7-11 Appendi x Chapter 7 Staple Cartridges FN-116 Staples for staple binding 3,000 s taples are provided in the staple ca rtridge.
7 7.3 Consumabl es 7-12 CF 2002/CF3 102 Appendi x Chapter 7.
8.1 System Requir ements 8 CF2002/CF3 102 8- 1 Using Pa geSco pe Lig ht Chap ter 8 8 Using PageScope Light PageScop e Light is a device c ontrol utilit y program provided by the HTTP s erver built in to the prin ter control ler. This utility c an be use d with a We b browser as an interfac e for remotely controll ing the printe r.
8 8.2 Acce ss 8-2 CF 2002/CF3 102 Using Pa geSco pe Lig ht Chap ter 8 8.2 Acc ess PageScop e Light c an be acces sed directl y from a We b browser. 1. Start the W eb browser. 2. In the Add ress bar, enter the IP address of the printe r controller a s shown below.
8.3 Screen Confi guration 8 CF2002/CF3 102 8- 3 Using Pa geSco pe Lig ht Chap ter 8 8.3 Screen Configuration The sc reen show n below is called the User M ode scree n; all us ers can v iew this screen . By entering an approp riate pass word in th e “ Admin Password ” box on the User Mod e screen, yo u can ent er the Admi nistrator Mod e screen.
8 8.3 S cre en Co nfigu ra tion 8-4 CF 2002/CF3 102 Using Pa geSco pe Lig ht Chap ter 8 4T a b s Selects the categor y of items to be disp layed. • System • Print • Network (Administrator Mode only) For details on e ach tab, see th e following sections.
8.3 Screen Confi guration 8 CF2002/CF3 102 8- 5 Using Pa geSco pe Lig ht Chap ter 8 Logging in Using the Admin istrator Mode By logg ing into Pa geScope Ligh t in the Admin istrator M ode, you can configure or confirm the printer c ontroller sys tem.
8 8.4 User Mode 8-6 CF 2002/CF3 102 Using Pa geSco pe Lig ht Chap ter 8 8.4 User Mode System Ta b On the [System ] tab, in formation concerning the syste m confi guration o f the pri nter and settin gs are display ed.
8.4 User Mode 8 CF2002/CF3 102 8- 7 Using Pa geSco pe Lig ht Chap ter 8 Detail This sc reen appears when you cl ick the [Detail ] menu on the [Sys tem] tab. Cl icking a sub-men u under the [Detail ] menu displ ays informatio n about the appl icable unit.
8 8.4 User Mode 8-8 CF 2002/CF3 102 Using Pa geSco pe Lig ht Chap ter 8 Output Tray This sc reen appears when you clic k the [Output Tray] sub -menu under th e [Detail] menu. I t shows the configur ation of al l the outp ut trays i nstalled on the prin ter.
8.4 User Mode 8 CF2002/CF3 102 8- 9 Using Pa geSco pe Lig ht Chap ter 8 Printer Hard Dis k This screen appears when you c lick the [Printer HDD] sub-menu under the [Detail] menu. I t shows the status o f the hard d isk instal led on the printer co ntroller.
8 8.4 User Mode 8-10 CF 2002/CF3 102 Using Pa geSco pe Lig ht Chap ter 8 Cons umables This s creen app ears when you click th e [Consum ables] sub-m enu unde r the [Detai l] menu.
8.4 User Mode 8 CF2002/CF3 102 8-11 Using Pa geSco pe Lig ht Chap ter 8 Counte r This s creen appears when you click th e [Counter] m enu on the [Sy stem] tab.
8 8.4 User Mode 8-12 CF 2002/CF3 102 Using Pa geSco pe Lig ht Chap ter 8 Onlin e Assi stance This s creen app ears when you clic k the [Onli ne Assis tance] menu on the [Sy stem] tab. It shows i nformatio n conce rning pro duct sup port. The informat ion can be edited in the Ad ministrator M ode.
8.4 User Mode 8 CF2002/CF3 102 8-13 Using Pa geSco pe Lig ht Chap ter 8 Print Tab The [Print ] tab is used to config ure the pri nter controlle r. Default Se tting This s creen appears when you click the [De fault Settin g] menu o n the [Print ] tab.
8 8.4 User Mode 8-14 CF 2002/CF3 102 Using Pa geSco pe Lig ht Chap ter 8 PCL Setting This sc reen appea rs when you c lick the [PCL Setting] sub -menu unde r the [Defau lt Setting] m enu. The scre en is used to s et default values for va rious PCL set tings.
8.4 User Mode 8 CF2002/CF3 102 8-15 Using Pa geSco pe Lig ht Chap ter 8 PostScript Se tting This s creen appe ars when y ou click th e [PostScri pt] Setting s ub-menu under the [Default Se tting] me nu. The sc reen is use d to set de fault values for vario us PostScrip t setting s.
8 8.4 User Mode 8-16 CF 2002/CF3 102 Using Pa geSco pe Lig ht Chap ter 8 Font Informatio n This sc reen appea rs when you cl ick the [Fo nt Information] m enu on the [Pri nt] tab. It show s a list of PCL fonts an d PostScrip t fonts tha t are built in to the pr inter contr olle r.
8.4 User Mode 8 CF2002/CF3 102 8-17 Using Pa geSco pe Lig ht Chap ter 8 PostScript Fo nt This s creen appe ars when you click th e [PostScri pt Fonts] s ub-menu under the [Font Information] menu. It s hows a lis t of PostScript fonts that are built into the print er controller.
8 8.4 User Mode 8-18 CF 2002/CF3 102 Using Pa geSco pe Lig ht Chap ter 8 Print Pages This s creen appears when you click the [Pri nt Pages] men u on the [Print] tab. The screen is used to select the test pag e to be prin ted and exec ute the pr inting.
8.5 Administr ator Mode 8 CF2002/CF3 102 8-19 Using Pa geSco pe Lig ht Chap ter 8 8.5 Administrator Mode By logg ing into Pa geScope Ligh t in the Admin istrator M ode, you can configure or confirm the printer c ontroller sys tem.
8 8.5 Admin istrator Mode 8-20 CF 2002/CF3 102 Using Pa geSco pe Lig ht Chap ter 8 ROM Version This sc reen appea rs when you cl ick the [RO M Version] menu on the [Syste m] tab. It shows the ROM version of the printer, the firm ware version of the controller, and other in formation.
8.5 Administr ator Mode 8 CF2002/CF3 102 8-21 Using Pa geSco pe Lig ht Chap ter 8 Online Assista nce This s creen app ears when y ou clic k the [O nline Assis tance] menu on the [ System] tab. You c an use t he screen to enter in formation concerning product s upport.
8 8.5 Admin istrator Mode 8-22 CF 2002/CF3 102 Using Pa geSco pe Lig ht Chap ter 8 Mainte nance This s creen ap pears when you cli ck the [Mainte nance ] menu o n the [Sys tem] tab. You can us e the screen to restart the pri nter control ler or initia lize the se ttings (reset to fa ctory defa ult settin gs).
8.5 Administr ator Mode 8 CF2002/CF3 102 8-23 Using Pa geSco pe Lig ht Chap ter 8 Initiali ze This s creen appe ars when y ou click th e [Init ialize] sub -menu unde r the [Mainte nance] m enu. You can u se the s creen to initi alize the printer co ntroller setting s (reset to factory d efault set tings) .
8 8.5 Admin istrator Mode 8-24 CF 2002/CF3 102 Using Pa geSco pe Lig ht Chap ter 8 Print Tab The [Prin t] tab is u sed to confi gure the pri nter controlle r. Local Inte rface This s creen app ears when you click th e [Local Inte rface] menu on t he [Print] tab.
8.5 Administr ator Mode 8 CF2002/CF3 102 8-25 Using Pa geSco pe Lig ht Chap ter 8 Network Tab The [Network ] tab s hows sett ings conce rning the p rinter cont roller netwo rk. Summary This s creen appears when you cl ick the [Su mmary] menu o n the [Network] ta b.
8 8.5 Admin istrator Mode 8-26 CF 2002/CF3 102 Using Pa geSco pe Lig ht Chap ter 8.
9.1 Index 9 CF2002/CF3 102 9- 1 Index Chapte r 9 9 Index 9.1 Index Numerics 1st dr awer ...................... ................. ................. ................. ................. .. 3-5 1st dr awer Pape r-e mpt y indic ato r .............. .......
9 9.1 I nde x 9-2 CF 2002/CF3 102 Index Chapte r 9 Finish er connec tor ................ ................. ................ ................. ............ 3-5 Front doo r ............ ................. ................. ................ ..............
9.1 Index 9 CF2002/CF3 102 9- 3 Index Chapte r 9 O Operati on precaution s ............... ................ ................. ................. ........ 2- 3 Option tray ................ ................. ................ ............ ...............3-1 , 3-9 , 7-7 Ozone f ilt er .
9 9.1 I nde x 9-4 CF 2002/CF3 102 Index Chapte r 9 Ready light ........... ................ ................. ................. ................. .... 3-10 Right/left keys . ........... ................. ................. ................. ...........
9.1 Index 9 CF2002/CF3 102 9- 5 Index Chapte r 9 U Upper co ver ................... ................. ................. ................. ................. .. 3-9 Uppe r door ..................... ................. ................. ................. .
9 9.1 I nde x 9-6 CF 2002/CF3 102 Index Chapte r 9.
2002. 12 Copyright 2002 MINOLTA CO., LTD. MINOLTA CO., LTD. 3-13, 2-chome, Azuchi-Machi, Chuo-ku, Osaka. 541-8556, Japan The information contained in this manual is subject to change without notice to incorporate improvements made on the product or products the manual covers.
デバイスBreadman CF3102の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Breadman CF3102をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはBreadman CF3102の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Breadman CF3102の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Breadman CF3102で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Breadman CF3102を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はBreadman CF3102の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Breadman CF3102に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちBreadman CF3102デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。