JA
Aura logo
公式取扱説明書

AURA MAIN COMPONENTS

4 ページ·721 KB·PDF·EN
AURA MAIN COMPONENTS
目次 20セクション TM · UNDERBODY · INSTALLATION GUIDE · V1.2 022021 · … 表示非表示
Page 1 of the AURA MAIN COMPONENTS user manual — V1.2 022021
1ページ · クリックして拡大
1ページ
AURA MAIN COMPONENTS — TM diagram (page 1)
図 1

TM

UNDERBODY

INSTALLATION GUIDE

AURA MAIN COMPONENTS — TM diagram (page 1)
図 2

V1.2 022021

Page 2 of the AURA MAIN COMPONENTS user manual — AUXILIARY WIRE EXTENSION WIRE
2ページ · クリックして拡大
2ページ
AURA MAIN COMPONENTS — INSTALLATION diagram (page 2)
図 3

INSTALLATION

AURA MAIN COMPONENTS — INSTALLATION diagram (page 2)
図 4

STEP 1

Decide where to locate the light strips and ensure wiring has enough length for control box to be installed in desired location.

As shown below, connect all light pods to the control box with the included extension cables.

AUXILIARY WIRE EXTENSION WIRE

AURA MAIN COMPONENTS — AUXILIARY WIRE EXTENSION WIRE diagram (page 2)
図 5

Once connected, plug the control box Cigarette Power Adapter into an available 12 volt charging port.

AURA MAIN COMPONENTS — AUXILIARY WIRE EXTENSION WIRE diagram (page 2)
図 6

or connect the positive wire to the fuse tap and connector the open negative wire to a ground (any metal surface). Then plug the fuse tap into the 10amp switched fuse.

Page 3 of the AURA MAIN COMPONENTS user manual — SoundSync™
3ページ · クリックして拡大
3ページ

INSTALLATION

STEP 2

Secure Control box in desired location with Velcro or zipties.

TM

* CONTROL BOX NOT WATERPROOF Ensure the control box is safely and securely hidden from exposing elements of moisture.

STEP 3

Secure the light bars using the zip ties to tie all the wiring away from the moving components.

* IMPORTANT: The LED connectors are not waterproof. You will need to use HEAT SHRINK TUBE (not included) or ELECTRICAL TAPE around the LED connectors to ensure the longevity of the lighting kit.

Using the included E-Z Remote, select your desired color or pattern. STEP 4

Dimmer

On / Off

Single-Color Strobe

Press multiple times to change color Adjust speed with "Dimmer" buttons

Multi-Color Fade

Adjust speed with "Dimmer" buttons

Multi-Color Cycle

Adjust speed with "Dimmer" buttons

SoundSync™

Color Selection

Press multiple times to change color To adjust the sensitivity, please visit www.OPT-7.com

Heat Shrink Tube

Page 4 of the AURA MAIN COMPONENTS user manual — NEED SUPPORT?
4ページ · クリックして拡大
4ページ

AUX WIRING FOR A DOME/DOOR LIGHT

In order to activate Door Assist Sync, you need to connect the aux wiring of Aura control box to the positive and negative wiring of dome or door light.

OPTIONAL UPGRADE

AURA MAIN COMPONENTS — OPTIONAL UPGRADE diagram (page 4)
図 7

Upgrade your Aura Original Control Box to the Aura Pro Bluetooth Control Box. All new AURA Pro Bluetooth is App enabled by a smart- phone controller (iOS & Android Compatible).

CONNECTED OFFON WHITE DOOR RANDOM ASSIST SOLID BRIGHTNESS

DISCLAIMER

OPT7 Lighting is not liable for damages or personal injuries while installing this product. The Installation Guide is intended as assistance to reduce setup time. OPT7 Lighting assumes no responsibility for improper installation. If you are unfamiliar with your vehicle or inexperienced with aftermarket upgrades, please seek professional assistance.

AURA MAIN COMPONENTS — DISCLAIMER diagram (page 4)
図 8

NEED SUPPORT?

Scan for tutorial videos, troubleshooting tips, and more.

情報源

参考資料・リンク

この取扱説明書で参照されているリンク(メーカー、サポート、ダウンロード等)。

AURA MAIN COMPONENTSについて質問する

ユーザーまたはスタッフが通常1日以内に回答します。あなたの質問が次の人の助けにもなります。

Add your email to get notified when it’s answered — no spam, ever.

0 questions
AURA MAIN COMPONENTSに関する質問はまだありません

最初の質問を投稿しましょう。他のユーザーや当チームが回答します。

原本

AURA MAIN COMPONENTS 取扱説明書(PDF)

4 ページ·721 KB·PDF
上のページをクリックするとここに表示されます
ページ 1 / …
100%
ページを読み込み中…