Briggs & Strattonメーカー5155 6 HPの使用説明書/サービス説明書
ページ先へ移動 of 28
A R D I S A M . c o m OPERA TING INSTR UCTIONS & P AR TS EXPLOSIONS CR T RO T O TILLERS OMCRT07 Rev . 12/21/06 © Copyright 2006 Ardisam, Inc. All Rights Reserved. Pr inted in USA. 5055 6 HP BRIGGS 5155 6 HP BRIGGS 6065VE 6.5 HP VIPER ELECTRIC R5055H 5.
OPERA TING INSTRUCTIONS AND P ARTS EXPLOSIONS CR T Models P age 2 800-345-6007 INTR ODUCTION THANK Y OU . . . f or purchasing an Earthquake® f orward rotating rear-tine rototiller from Ardisam, Inc. We ha ve worked to ensure that this rear-tine rototiller meets high standards f or usability and durability .
OPERA TING INSTRUCTIONS AND P ARTS EXPLOSIONS CR T Models P age 3 800-345-6007 SAFETY O WNER’S RESPONSIBILITY Accurate assemb ly and safe and eff ective use of the rototiller is the owner’ s responsibility . • Read and f ollow all saf ety instructions.
OPERA TING INSTRUCTIONS AND P ARTS EXPLOSIONS CR T Models P age 4 800-345-6007 IMPOR T ANT THE RIGHT AND LEFT SIDES OF Y OUR RO TO TILLER ARE DETER- MINED FROM THE OPERA TING POSI- TION AS Y OU F ACE THE DIRECTION OF FOR W ARD TRA VEL. ENGINE IS SHIPPED FROM F ACT OR Y WITHOUT OIL.
OPERA TING INSTRUCTIONS AND P ARTS EXPLOSIONS CR T Models P age 5 800-345-6007 P art No. LBL516AA W ARNING INSTRUCTIONS Hood Decal P art No. LBL516C W ARNING Belt Cover Decal P art No.
OPERA TING INSTRUCTIONS AND P ARTS EXPLOSIONS CR T Models P age 6 800-345-6007 UNP A CKING AND ASSEMBL Y Y our rototiller comes fully assembled except for a f ew par ts. The fol - lowing instructions will help you unpack y our tiller and assemble and adjust y our tiller’ s depth regulator le v er , cab le tension and handlebar height.
OPERA TING INSTRUCTIONS AND P ARTS EXPLOSIONS CR T Models P age 7 800-345-6007 FEA TURES f orward drive saf ety control le ver detent pin f orward & re verse cab le recoil star t serial number pla.
OPERA TING INSTRUCTIONS AND P ARTS EXPLOSIONS CR T Models P age 8 800-345-6007 OPERA TION PRE-ST ART INSPECTION 1. Make sure all saf ety guards are in place and all nuts and bolts are secure. 2. Check oil le vel in engine crankcase. See your engine manual for procedure and specifications.
OPERA TING INSTRUCTIONS AND P ARTS EXPLOSIONS CR T Models P age 9 800-345-6007 IDLE SPEED Use the “low” position on the throttle lev er to reduce stress on the engine when tilling is not being perfo r med.
OPERA TING INSTRUCTIONS AND P ARTS EXPLOSIONS CR T Models P age 10 800-345-6007 DRIVE SAFETY CONTROL LEVERS FOR W ARD LEVER Engages wheels and tines into f orward. Pulling the drive saf ety control le ver labeled (FOR W ARD) toward the handlebar engages the wheels and tines.
OPERA TING INSTRUCTIONS AND P ARTS EXPLOSIONS CR T Models P age 11 800-345-6007 WHEEL LOCK PINS (5055, R5055H) Place wheels in tilling position. 1. Remov e lock pin. Align hole in axle with hole in wheel hub . 2. Inser t lock pin through holes, fold lock pin ring to secure pin to axle.
OPERA TING INSTRUCTIONS AND P ARTS EXPLOSIONS CR T Models P age 12 800-345-6007 DEPTH REGULA T OR LEVER Tilling depth is controlled by the height of the depth regulator le ver . T o adjust tilling depth. 1. Remov e detent pin. 2. Raise the depth regulator lev er to position tines at chosen tilling depth.
OPERA TING INSTRUCTIONS AND P ARTS EXPLOSIONS CR T Models P age 13 800-345-6007 TILLING TIPS The ke y to successful tilling is to begin with a shallow cut on the first pass, and then work an inch or two deeper on each successive pass. • Tilling depth will vary with ground conditions.
OPERA TING INSTRUCTIONS AND P ARTS EXPLOSIONS CR T Models P age 14 800-345-6007 SER VICING THE RO T O TILLER The f ollowing information will help you make the necessar y checks and perf or m the procedures required to follow the nor mal care recommendations made f or your rototiller unit.
OPERA TING INSTRUCTIONS AND P ARTS EXPLOSIONS CR T Models P age 15 800-345-6007 BEL T REPLA CEMENT P ART #’S: 727A (f orward) 730 (re v erse) CHA NGE FO RWA RD/ REV ERS E BEL T 1. T ur n off engine. Engine must be cool. 2. Remov e spark plug wire and secure from spark plug.
OPERA TING INSTRUCTIONS AND P ARTS EXPLOSIONS CR T Models P age 16 800-345-6007 ENGINE MAINTENANCE Ref er to the engine manual included in your par ts pack et for inf or mation on engine maintenance. Y our engine manual provides detailed information and a maintenance schedule for perf orming the f ollowing tasks: 1 .
OPERA TING INSTRUCTIONS AND P ARTS EXPLOSIONS CR T Models P age 17 800-345-6007 LUBRICA TION Proper lubrication of moving mechanical par ts is cr itical f or proper care and maintena nce . Oil the movi ng parts sho wn at 10 hour interv als using a 30 weight oil.
OPERA TING INSTRUCTIONS AND P ARTS EXPLOSIONS CR T Models P age 18 800-345-6007 TR OUBLESHOO TING AND REP AIR TROUBLESHOO TING GUIDE While nor mal care and routine maintenance will e xtend the lif e o.
OPERA TING INSTRUCTIONS AND P ARTS EXPLOSIONS CR T Models P age 19 800-345-6007 PROBLEM REMED Y/A CTION Belts squeal in neutral and/or re verse • Adjust f orward belt guide: - turn engine off and al.
OPERA TING INSTRUCTIONS AND P ARTS EXPLOSIONS CR T Models P age 20 800-345-6007 CRT HANDLEB AR P ARTS EXPLOSION 53650(2) 53614 53613 53612 53620 53606(2) 53607(4) 503 53629 60G56 53630(2) 53624 2104(4.
OPERA TING INSTRUCTIONS AND P ARTS EXPLOSIONS CR T Models P age 21 800-345-6007 CRT HANDLEB AR P ARTS LIST P ART # DESCRIPTION QTY . 2104 Nut He x T wo-W ay 3/8-16 6 48762 Bolt 3/8-16 x 1” Carriage .
OPERA TING INSTRUCTIONS AND P ARTS EXPLOSIONS CR T Models P age 22 800-345-6007 CRT TINES & HOOD P ARTS EXPLOSION 53698, 53699 8931(2) 8905F(2) 1439(2) 1103C(2) 1103B(2) 8932(2) 1103A(2) 1710(2) 1.
OPERA TING INSTRUCTIONS AND P ARTS EXPLOSIONS CR T Models P age 23 800-345-6007 CRT TINES & HOOD P ARTS LIST P ART # DESCRIPTION QTY . 1103 Lock Pin 5/16” x 1-3/4” 2 1103A Wheel Lock out Knob .
OPERA TING INSTRUCTIONS AND P ARTS EXPLOSIONS CR T Models P age 24 800-345-6007 CRT MO T OR MOUNT P ARTS EXPLOSION 53413 1501(4) 53623 810 504(2) WF516 743 803 731 804 741, 742 53616 60G56(5) WF38(2) .
OPERA TING INSTRUCTIONS AND P ARTS EXPLOSIONS CR T Models P age 25 800-345-6007 CRT MO T OR MOUNT P ARTS LIST P ART # DESCRIPTION QTY . 1407 Forw ard Arm Spr ing 2 1408 Forw ard Pulley Idler 2 1416 Cl.
OPERA TING INSTRUCTIONS AND P ARTS EXPLOSIONS CR T Models P age 26 800-345-6007 CRT WHEEL & TILLER SHAFT P ARTS EXPLOSION & P ARTS LIST P ART # DESCRIPTION QTY .
.
Ear thquake , Division of Ardisam, Inc. 1690 Elm Street; P .O . Bo x 666 Cumberland, Wisconsin 54829 800-345-6007 · F ax (715) 822-2223 E-mail: info@ardisam.com A R D I S A M . c o m Visit www .ardisam.com and discov er more innov ations that will benefit you throughout the y ear .
デバイスBriggs & Stratton 5155 6 HPの購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Briggs & Stratton 5155 6 HPをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはBriggs & Stratton 5155 6 HPの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Briggs & Stratton 5155 6 HPの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Briggs & Stratton 5155 6 HPで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Briggs & Stratton 5155 6 HPを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はBriggs & Stratton 5155 6 HPの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Briggs & Stratton 5155 6 HPに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちBriggs & Stratton 5155 6 HPデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。