BTメーカー3010の使用説明書/サービス説明書
ページ先へ移動 of 67
Div erse 30 1 0 Micro User Guide Digital Cordless T elephone This equipment is not designed for making emergency telephone calls when the power fails. Alternative arrangements should be made for access to emergency services.
Please open this page for a ‘Further at a glance’ guide to your Diverse 3010 Micro..
2 1 3 4 5 6 7 8 9 0 MNO ABC DEF PQRS JKL GHI TUV WXYZ aA R At a glance Display Directory Enables speed dialling of numbers stored in the memor y . Option buttons Lets you select from the menu options on the display . Headset port When used with the Diverse 3010 Micro headset this allows you total mobility .
If anything is missing. please contact your place of purchase immediately . Diverse 3010 Micro base station. Diverse 3010 Micro handset. Batter y compar tment cover .
Handset display symbols The following symbols can appear in the display . ➜ Up/Down. Left/Right. Mailbox function. e.g. new entr y in the caller list. Delete character . Range Indicator . Sets up dif fer ent menu options. Inter nal dialling. Redialling number .
2 Quick guide Information for the handset settings. Function Key combination Activate/deactivate the handset Hold down for 1 second Activate/deactivate keypad protection Hold down for 1 second Answer .
3 In this guide At a glance 1 Introducing the Diverse 3010 Micro 4 Building up a phone system 4 Setting up 5 Warning 5 Approved rechargeable batteries 5 General cleaning 5 Using your Diverse 3010 Micr.
4 Introducing the Div erse 3010 Micro Please read the instr uctions carefully before use and retain this user guide for future refer ence. This guide covers the basic features of the Diverse 3010 Micro. Building up a phone system Y ou can add fur ther handsets to build up an easy-to-use cordless telephone system.
5 S etting up Warning 1 For the handset use only approved Nickel Metal Hydride (NiMH) rechargeable batter y pack. Replacement batter y packs are available from the Diverse Helpline 08457 908070 . 2 Do not tr y to use any power supply except the one provided, other wise you may permanently damage your Diverse 3010 Micro.
6 Follow these steps to get your Diverse 3010 Micro ready for use Note Plan where you will put your Diverse 3010 Micro. It should be within two metres of a power socket and the phone socket. Note Y our handset is already “registered” to the Diverse 3010 Micro base station.
3 Install the rechargeable battery pack in the handset The handset uses a rechargeable Nickel Metal Hydride (NiMH) batter y pack, which is supplied. Y ou must only use approved batteries. To install it, inser t the batter y pack as indicated on th e label inside the batter y compar tment and slide the batter y compar tment cover shut.
8 Place the handset on the base. When charging, the batter y level symbol shown on the display flashes. Battery performance After charging your Diverse 3010 Micro for the first time, subsequent charging time for the handset batteries is approximately 4-5 hours.
9 Note If you go out of range of a base station for a long time while your handset is switched ON, it may take more than 20 minutes to ‘find’ the base station again when you come back within range. However , by simply switching the handset OFF for a moment, then ON again, it will find the base station within a few seconds.
T o switch on Press and hold down the RED PHONE button for about a second. The display comes on. T o lock the keypad This prevents you accidentally operating the handset’s keypad when car r ying it around. Y ou can receive calls, but cannot make calls.
11 T o unlock the keypad Press and hold the button. Y ou can now use the keypad again. # The number is dialled. Or Press the GREEN PHONE button. Y ou hear the dial tone. Key the number you want. T o switch off Press and hold the RED PHONE button for about a second until the display goes blank.
Caller display/Call Waiting The Diverse 3010 Micro can let you know who’s calling before you answer the telephone. W ith BT’s Caller Display and Call W aiting ser vice, your Diverse base station receives caller infor mation which is transmitted over the BT network, for more infor mation see pages 23-27.
13 Secrecy Y ou can switch of f the handset microphone so that your caller cannot hear you while you talk to someone else in the room. When ready , you can switch the microphone back on. During a call: Press the INT button to switch the microphone of f.
14 T o delete a redial number Press the REDIAL button. Press the DOWN button to highlight the number you want. Press the MORE OPTIONS button. Press the DOWN button to highlight Delete Entr y . Press the OK button to confirm. Press the RED PHONE button to retur n to standby .
15 T o make an internal intercom call Press the INT button. Y our handset inter nal number is displayed. Press the inter nal handset number you wish to call e.g. 2 or press the CALL ALL button to call all handsets. If calling all handsets, you can talk to the first handset that answers.
16 T o put an outside call on hold while you make an internal call Press the INT button. Y our handset inter nal number is displayed e.g. 1 . Press the number of the inter nal handset number you wish to call e.g. 2 or press the CALL ALL button to call all handsets.
17 Quick call transfer After dialling the other handset, you can immediately press the RED PHONE button, or replace the handset on the base and th e call will be transferred straight through. If the other handset is already engaged, or does not answer the call within 30 seconds, the call will be returned to your handset.
18 The DOWN ar row is used to move from the “name” line to the “number” line. The UP ar row moves you back up to the name line. The “first letter” of the name is written automatically in upper case, the letters immediately after wards ar e written in lower case.
19 T o dial a number stored in the Directory Press the DIRECTOR Y button to open the phone book. Press the DOWN or UP ar rows to scr oll through to the names you require. Press the GREEN PHONE button to dial the number . Or To quick search for a director y name, press the button with the first letter of the name you wish to call, e.
20 T o view an entry in the directory Press the DIRECTOR Y button. Press the UP /DOWN ar rows to scroll to the entr y you want or find the required name by using the keypad to enter the first letter of the name. Press the MORE OPTIONS button. Press the DOWN ar row to highlight Display Entry .
21 T o copy a directory from one Micro handset to another Y ou can copy the entire director y to another handset to avoid having to input the same entries twice using the handset with the director y you wish to copy (e.g. handset 1). Press the DIRECTOR Y button.
22 T o delete all names and numbers in the directory Press the DIRECTOR Y button. Press the MORE OPTIONS button. Press the DOWN ar row to highlight Delete List . Press the OK button. Enter the PIN number of the handset (original setting 0000 ). Press the OK button.
23 T o copy a redial number to the Directory Press the REDIAL button. Press the DOWN button to highlight the number you want. Press the MORE OPTIONS button. Press the DOWN button to highlight Copy to Dir . Press the OK button. Enter a name for the number (see page 17) .
24 Using Caller Display and Call W aiting BT’s Caller Display and Call Waiting If you subscribe to Caller Display you can see who is calling you (on your handset display).
25 Information displayed via other UK networks If you are connected to a dif ferent network, you will first have to subscribe to that network's Caller Display and Call W aiting ser vice. Call your network provider for more infor mation. Using the Micro handset When the phone rings, your caller’s number is displayed.
26 The newest entr y is then displayed after approximately 2 seconds. ALL CALLS SETTING UNANSWERED CALLS SETTING Shows the number of calls in the Calls List, i.e. call 1 of 15. Date Time This indicates that the call was answered when it was received. 0 1.
T o copy a number from the calls list to the directory Press the button to enter the calls list, or press the INT , SET and 2 buttons. Scroll to the number you wish to copy . Press the MORE OPTIONS button. Press the DOWN button to highlight Copy to Dir .
28 T o delete a number in the calls list Press the button to enter the calls list, or press the INT , SET and 2 buttons. Scroll to the number you require. Press the MORE OPTIONS button. Press the DOWN button to highlight Delete Number . Press the OK button.
29 T elephone S ecurity Y our Diverse 3010 Micro gives you a variety of ways to prevent unauthorised use of the phone or handset. Base station and handset PIN As a digital phone system, your Diverse 3010 Micro provides excellent security against others ‘listening in’ to your calls.
30 Press the RED PHONE button to retur n to standby . T o change the handset PIN (personal identification number) The PIN on your handset protects functions and settings from unauthorised access. A handset PIN is necessar y in order to: – reset the memor y – reset to the original settings.
Press the OK button. Press the DOWN ar row to highlight Security . Press the OK button. Enter the cur rent handset PIN number (original setting 0000 ). Press the OK button. Press the DOWN ar row to highlight Handset Lock. Press the OK button. Y ou hear a confirmation beep and a ✔ appears next to Handset Lock.
Emergency ser vices (e.g. 999 , 112 ) and special numbers can be dialled even if the telephone is locked. ( N.B: This does not apply if connected to a switchboard and call bar ring is set.) Press the OK button. Display shows the numbers of all handsets registered to the base station (e.
33 Press the OK button. Enter the special number you want. Press the DELETE button to delete digits. Press the OK button to confirm. Press the RED PHONE button to retur n to standby . 999 and 112 emer gency ser vices numbers are not af fected by any call bar ring setting.
34 Note The barred or enabled numbers must be switched on before you can use this. W ARNING Y ou cannot dial 9 999 or R 999 fr om behind a switchboard when call barring is set. Directory for barred/enabled numbers To: Bar numbers. Enable handsets to call only specified numbers.
35 Press the 0 button twice. Press the OK button. Enter the base station PIN (original setting 0000 ). Press the OK button. Press 1 to bar the numbers you have stored. Press 3 to enable handsets to dial only the numbers stored Press 0 to switch call bar ring/ call enabling of f.
36 Additional features Handset settings quick guide The handset settings menu allows you to change: • Ringer volume The handset ringer has 5 volume settings. • Ringer melody The handset ringer has a choice of 10 melodies. Beeps Y ou can switch specific beeps on or of f.
37 Quick Reference Handset Display Follow these easy steps to change your handset settings. Settings Base Settings Base User Option Hset User Option Room Monitor Set Service Set Up Main Menu Sound Settings Security Auto Talk Language Default Reset Settings Ringer Volume Ringer Melody Beep Handset Volume Key Beeps Batt.
38 Base station settings T o adjust the ringer volume in the base station There are seven levels: 0 = of f, 6 = high. (Default setting is 6.) Press the INT button. Press the SET button Press the 0 button. Press the 5 button. Press the OK button. Display shows the volume level set.
39 T o switch music on hold on or off When you have a caller on hold you can choose to let that person listen to music while they are waiting for you to retur n to them. Press the INT button. Press the SET button. Press the 4 button. Press the 3 button.
40 Note The internal user can elect to terminate open listening by pressing the RED PHONE button. De-activating open listening: Press the LSTN.OFF button.
41 T o adjust the sensitivity of the room monitor There are thr ee levels. 1 = most sensitive 3 = least sensitive. Press the MENU button. Press the DOWN ar row to highlight Set Level . Press the OK button. Press the LEFT or RIGHT ar rows to select the level you want.
This will NOT reset: – The base station PIN. – Handset registration settings. 42 Note When the Room Monitor is switched on, the handset will not ring. Incoming calls are displayed on the handset’s screen. All warning beeps should be switched of f before using the Room Monitor , see pages 36-37.
43 T o reset the handset to its original settings Press the MENU button. Press the DOWN ar row to highlight Settings . Press the OK button. Press the DOWN ar row to highlight Default Reset . Press the OK button. Enter your cur rent PIN number (original setting 0000 ).
44 T o set which handset will receive ring priority Once you have set your Diverse 3010 Micro to ring priority , you can select the handset you want to ring first. The handset registered with the base station as 1 , is automatically the priority handset and will ring first unless you specify another handset.
45 T o set the number of rings on ring priority Y ou can specify the number of rings your selected handset can have before an incoming call rever ts to all available handsets. Press the INT button. Press the SET button. Press the 3 button then press the 4 button.
46 Press the UP and DOWN ar rows until one of these words ar e highlighted: – Einstellingen – Reglages – Impostazion – Ajuste – Instellingen – Programgôes Press OK . Press the UP and DOWN ar rows until one of the following words appear highlighted.
47 Registering a new Div erse 3000 Micro handset with the base station Don’t forget that your Diverse 3010 Micro handset is already r egistered. Up to six handsets can be registered and operated from the Diverse 3010 Micro base station.
48 NB. There is a small delay before these numbers are displayed on the screen. Select and enter one of these numbers. This is now the handset’s inter nal number and is registered with the base station, e.g. Base 2 stops flashing. T o de-register a handset A de-registered handset cannot be used to make calls at this base station, e.
49 Using multiple base stations and handsets It is possible to build your Diverse 3010 Micro into a much larger phone system with the addition of up to 4 base stations. When planning to use a handset at more than one base station, it is recommended that you: • Assign a number to each base station, from 1 to 4 .
T o set your handset to fixed base selection Press the MENU button. Press the DOWN ar r ow to highlight Base Settings . Press the OK button. Press the UP or DOWN ar rows to highlight the base that you want to be fixed. Press the MORE OPTIONS button. Press the DOWN ar r ow to highlight Select Base .
51 T o change the base station name Y ou can rename the preset base station names which appear on your screen. This lets your display permanently show a more meaningful name for your base station, for example, Kitchen, Study , Of fice. Press the MENU button.
52 Using your Div erse 3010 Micro with a Switchboard Y our Diverse 3010 Micro can be connected to compatible switchboards. If in doubt please contact your switchboard supplier . Setting to T one or Pulse dialling Y our Diverse 3010 Micro is preset to TONE dialling – where you hear a tone beep each time you dial a number .
53 T o set to TONE dialling with earth recall Press the INT button. Press the SET button. Press the 3 button then press the 5 button. Press the OK button. Enter the cur rent base station PIN (original setting 0000 ). Press the OK button. Press the 1 button to set Tone with fixed flash time.
54 T o insert an access code This means the access code will be automatically dialled before any number stored in the Caller Display calls list. Press the INT button. Press the SET button. Press the 4 button then press the 0 button. Press the OK button.
55 Maintenance General Simply clean the Diverse 3010 Micro and base station with a damp cloth or an antistatic wipe. Never use a dr y cloth as this may cause a static shock. Ser vice Within the warranty period If you experience a problem with your Diverse 3010 Micro you should contact the Diverse Helpline on 08457 908070 .
56 Help Y our Diverse 3010 Micro has been designed to be easy to use. If you should experience a problem, please check the following points. Emergency calls The emergency services can be contacted in the UK by dialling 999 , or 11 2 in any countr y that is a member of the European Community .
in use. W ait until the call is finished and tr y again. The handset display shows the words Search base or you cannot link up with the base station Is the handset registered with the base station? To register the handset, see page 47.
58 Can’t get through, even though a dialling tone can be heard Y ou may be set to the wrong signalling method. To change between TONE and PULSE dialling, see ‘Using your Diverse 3010 Micro with a switchboard’, page 52. Handset beeps Are the handset batteries low? Y ou will hear a beep ever y 30 seconds.
59 T echnical information Environment Y our Diverse 3010 Micro should be kept fr ee of dust, moisture, high temperature, vibration and should not be exposed to direct sunlight. Do not stand it on carpets or other sur faces which generate fibres or place it in locations which prevent the free flow of air over its sur faces.
60 Index A daptor 6 Additional features 36 Approval 59 At a glance 1 Autotalk 37 B ase station change name 51 change PIN 29 fixed base selection 50 melody 38 music on hold on/of f 39 reset 42 ringer v.
61 Copy director y entr y fr om one handset to another 20 director y from one handset to another 21 number from calls list to director y 27 redial number to the director y 23 Delete additional emergen.
62 exter nal dialling 31 keypad 10 room monitor 41 Open listening 39-40 another handset ‘listening in’ 39 P aging find a handset’s extension number 14 page handset from the base station 15 recei.
Offices worldwide The Telecommunications ser vices described in this publication are subject to availability and may be modified from time to time. Ser vices and equipment are pr ovided subject to British Telecommunications plc’s respective standard conditions of contract.
デバイスBT 3010の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
BT 3010をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはBT 3010の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。BT 3010の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。BT 3010で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
BT 3010を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はBT 3010の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、BT 3010に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちBT 3010デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。