
Instructions

SOC [ ISPBOOOT.BIN] Update instructions:
1、SOC upgrade file decompression, the [ISPBOOOT.BIN] file placed in the USB root directory.
2、Press the reset button (inside the red circle), then turn the ILL on / off 5 times (opening /
closing 2 actions for 1 times) in 4 seconds.

3、Waiting for 25 seconds, the appearance of the picture. (if you wait for 40 seconds or more, no
pictures appear, please change the U disk to start from the first step).

4、The above picture is upgrading, please do not power down or pull out the U disk. When the
following picture appears, it represents a successful upgrade.


5、After the upgrade is successful, power off and power on again.
MCU Update instructions:







[Note] 1.Once the MCU and SOC software have been upgraded, the receiver must be factory reset (Setup-->General-->Factory Reset) for the firmware to be active.
ユーザーまたはスタッフが通常1日以内に回答します。あなたの質問が次の人の助けにもなります。
最初の質問を投稿しましょう。他のユーザーや当チームが回答します。