Cables to Goメーカー29573の使用説明書/サービス説明書
ページ先へ移動 of 36
1 U SER G UIDE W IRELESS VGA D EVICE A DAPTER Model: 29573.
1 Introduction........................ ............................................................ ............................... ..............................2 Features............................. .................................................
2 Thank you for purchasing the TruLink™ Wireless VGA Device Adapter. Th is product utilizes the latest in wireless technology, so you can display video and imag es from a PC on a remote m onitor, projector, or television up to 30 feet away through the use of a compatible Wireless USB host adapter (sold separately).
3 Supports high resolution UXGA video of 1600x1200 at distances up to 30ft Works in both extended desktop a nd dual monitor/clone screen modes Supports native mode for playback of high res.
4 Microsoft® Windows® XP 32-bit wi th Service Pack 3 or higher Microsoft® Vista® 32-bit/64-bit Microsoft Windows 7 32-bit/64-bit VGA cable to connect from the Wireless VGA Device Adapter to your display device Minimum Requirements (Office, Product ivity, and Web applications) Windows XP- Processor: 1.
5 Wireless VGA Device Adapter One (1) Dipole Antenna 3ft USB A Male/Mini-B Male Cable One (1) Power Adapter (cord approx. 4ft) Pin-Association Stickers Quick Start Guide Dr.
6 5 1 2 3 468 7 W IRELESS VGA D EVICE A DAPTER 1. VGA : VGA Activity Indicator • LED is solid when disp lay cable is connected. • LED is blinking when dat a is being transferred.
7 IMPORTANT NOTE: • If installing on Windows XP, Service Pack 3 (SP 3) is required. Verify that this h as been installed before installing the Wire less VGA Device Adapter software.
8 This will take you to the TruLink Wireless USB Kit InstallShield Wizard . Click “Next” to go to proceed with the install. Read and accept the Wirel ess USB software License Agreement by clicking “Yes”.
9 Read and accept the Li cense Agreement for the DisplayLink software. After the software installs, your installation is complete and you can hit the “Finish” bu tton to exit the wizard.
10 S TEP 2 (I F NECESSARY )-D RIVER I NSTALLATION F OR THE W IRELESS USB H OST A DAPTER ( SO LD SEP ARATELY ) 1. Install your Wireless USB host adapter if you have not already done so. Please refer to your Wireless USB host adapter instructional guide or you may tr y to contact the manufac turer for the proper driver installation process.
11 S TEP 3 – D EVICE I NSTALLATION FOR THE T RU L INK W IRELESS VGA D EVICE A DAPTER The TruLink Wireless VGA Device Adapter supports two association me thods: Cable Association and Pin Association. Only one of these meth ods is necessary to complete inst allation.
12 Figure: Pin Association Entry P IN A SSOCIATION For Pin Association, it is str ongly recommended that you use a TruLink Wireless USB Host Adapter, as some other Wireless USB host adapters may not support the fe ature. To pin associate with the TruLink Wireless USB Host Adapter, please do the following: 1.
13 V ERIFY C ONNECTION To verify connection from Cable or PIN Associati on, you can open the Wireless USB host manager utility and you should have an icon displa yed representing the TruLink Wireless VGA Device Adapter. W IRED M ODE Your Wireless VGA Adapter can also be used wired mode.
14 W IRELESS VGA D ISPLAY S ETTINGS The TruLink Wireless VGA Device A dapter hosts a number of various se tti ngs so that you may configure your image to the way you need it. After you have properly installed t he USB to VGA Adapter, an icon repr esenting a monitor will appear in your Windows icon tray.
15 NOTE: By default, your monitor will be set for the bes t resolution and will extend your screen to the right. Figure: Display Settings Menu U SING THE W IRELESS VGA D EVICE A DAPTER.
16 M ENU D ESCRIPTIONS Screen Resolution This allows adjustment for your vide o’s display capable screen resolution s. Please note that if all the options appear from the range of 64 0x480~1680x1050, your moni tor will most likely only accept what its maximum capability is.
17 Advanced... This will allow you to go into the Display Propert ies settings and make adjustments to your display settings. W IRELESS USB H OST A DAPTER S ELECTION Your Wireless USB host adapter/s will have to go through the associati on process before they can be used with the TruLink Wireless VGA Device Adapter.
18 W IRELESS USB H OST A DAPTER R ESET To erase all Wireless USB host adapt ers associated to your Wireless VG A Device Adapter, hold down the “RESET” button for 10 seconds. Th is will cause the Wireless VGA Devi ce Adapter to erase all Wireless USB host adapters that have been a ssociated from its list.
19 1. Why can’t I install .NET? You may have an older version of .NET, preventing the newer one from bei ng installed. Using Add/Remove Programs or Programs a nd Features on the Control Panel , uninstall any version of Microsoft .NET Framework™ older t han version 2.
20 3. Why is my video choppy? If you are experiencing choppy video, try changing the channel (please refer to your Wireless USB host adapter settings for this) or move in your computer closer to the display. 4. I see a blue screen or my desktop backgroun d on my display connected with the Wireless VGA Device Adapter, but no icons.
21 1. We only recommend playing bac k video in “Extend” mode. 2. Don’t switch between “Mirror” and “Extended” modes while video is being played on the wireless display. Doing this can confuse the video player which may cause it to stop its playback.
22 Operating System Support Microsoft XP 32-bit; Microsoft Vista 32-bit/64-bit; Windows 7 32-bit/64-bit Operating Range Up to 30 feet (10 meters) PHY Data Rate 53.3Mbps, 80Mbps, 106.6Mbps, 16 0Mb ps, 200Mbps, 320Mbps, 40 0Mbp s, 480Mbps Frequency 3.1GHz to 4.
23 At Cables To Go, we want you to be totally confident in your purchase. That is why we offer a one year warranty on this device. If you experience problems due to workmanship or material defect for the duration of this warranty, we will repair or replace this device.
24 ! Do not plug the unit in any outlet that does not have enough current to allow the device to function. Refer to the specifications in this manual for power level of the unit. ! Liquid: If this unit or its corresponding power adapter has had liquid spilled on or in it, do not attempt to use the unit.
25 C ABLE ASSOCIATION WI TH OTHER DEVICES A SSOCIATION C ONCEPT In order to establish a secure wireless connection, both your Wireless USB hos t adapter and the Wireless VGA Device Adapter must exchange information about each other. Th is is done via cable or PIN association.
26 Fi g ure: Cable Association C ABLE A SSOCIATION P ROCEDURE Cable association steps: Examples/F igures shown used with the associ ation of the TruLink Wireless VGA Device Adapter when used with t he TruLink Wireless USB Host Adapter. This process will vary by manufacturer of your Wirele ss USB host adapter.
27 Figure: Wireless VGA Adapter and TruLink Hub Connected Associated Certified Wirel ess USB Devices will appear as icons in the Wireless USB Manager. When the Certified Wireless USB Devices are connected, the icon will appear in color (Figure: Wireless VGA Adapter and TruLink Hub Connected).
28 Figure: Discovery Mode Screen P IN A SSOCIATION P ROCEDURE PIN association steps: Examples/Fig ures shown used with the associat ion of the TruLink Wireless VGA Device Adapter when used with the TruLink Wireless USB Host Adapter.
29 Figure: Discovery Mode in Process Figure: Pin Association Entry 2. The Wireless USB host will search for the Wireless VGA Device Adapter within it s range.
30 4. Enter the PIN of the Wireless VGA Adapter (4-digi t PIN) and cli ck Accept A ssociation. The Wireless VGA Adapter and Wireless USB Host Adapter are now associated and ready for operation. P IN C HANGE P ROCEDURE The default PIN setting for the Wi reless VGA Device Adapter is “1234 ”.
31 3 . Make sure the WIRELESS/WIRED swit ch on your Wireless VGA Adapter is in the WIRELESS position and the power cable is plugged in your Wireless VGA Adapter. Connect t he USB cable between your Wireless VGA Adapter and any avai lable USB port on your computer.
32 4. Click Install this driver software anyway. 5. To change pin, click “Change PIN” A PPENDIX.
33 6. Enter a 4-Digit PIN (0-9) and click OK. 7. If your PIN is valid, a window displaying yo ur new PIN will appear. Press OK. Your PIN has been successfully changed. IMPORTANT: please exit the Trulink PI N Utility application (Exit button as shown on figure in step 5) bef ore unplugging the USB cable between your Wireless VGA Adapter and your PC.
34.
35 For more information on this product or to check for updated drivers, manuals or frequently asked questions pleas e visit our website. www.cablestogo.
デバイスCables to Go 29573の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Cables to Go 29573をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはCables to Go 29573の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Cables to Go 29573の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Cables to Go 29573で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Cables to Go 29573を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はCables to Go 29573の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Cables to Go 29573に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちCables to Go 29573デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
