CampbellメーカーSM4Mの使用説明書/サービス説明書
ページ先へ移動 of 39
SM4M / SM16M Storage Module User Guide .
.
Guarantee • • • Campbell Sci entific Ltd, Campbell Park, 80 Hathern Road, Shepshed, Leices tershire, LE12 9RP UK Tel: +44 (0) 1509 601141 Fax: +44 (0) 1509 601091 Email: support@c ampbellsc i.
.
i Contents Section 1. SM4M/S M16M Stor age Module Overview ..................................................................1-1 1.1 Specifications ........................................................................................ 1-1 1.2 Physical Description .
SM4M/SM16M Storage Module User G uide ii Section 4. Storage Modul e Memory: Details of Data Storag e ...........................................4-1 4.1 File Marks ........................................................................................
1-1 Section 1. SM4M / SM16M Storage Module Overview 1.1 Specifications ° ° ° °.
SM4M/SM16M Storage Module User G uide 1-2 µ Logan, UT SM4M SN: S O L I D S T A T E S T O R A G E M O D U L E MADE IN USA STA TUS W R ITE Figure 1-1 Storage Module and SC12 Cable 1.
Section 1. SM4M/SM16M Storage Module Ov erview 1-3 1.3 Power 1.3.1 Primary Power 1.3.2 Backup Power and Data Retention 1.4 Function 1.4.1 Operati on with Curr ent Datal ogger s Dat alo gge r SM4M/ 16M.
SM4M/SM16M Storage Module User G uide 1-4 1.4.2 Operati on wi th Dataloggers wi th Ol der Operating Systems (Printer-Enabl e Method) 21X CR7X CR7 CR21 DSP4 SM4M / 16M Figure 1-3 Pin-Enable O perations 1.
Section 1. SM4M/SM16M Storage Module Ov erview 1-5 1.4.4 Memory Configuration 1.4.5 Baud Rates 1.4.6 File Marks The SM must be disc onnected from power for a minimum of 10 seconds to be certain it places a File Mark in the SM when reconnected.
SM4M/SM16M Storage Module User G uide 1-6 1.5 Quick Start-Up Procedure 1.5.1 Preparation 1.5.2 Progr ammi ng the Datalogger to Send Data to the SM.
Section 1. SM4M/SM16M Storage Module Ov erview 1-7 1.5.3 Manual Dump 1.5.4 Data Retrieval.
.
2-1 Section 2. Storing Data from Current Dataloggers 2.1 Instruction 96 — Output Data Under Program Control.
SM4M/SM16M Storage Module User G uide 2-2 Be sure to complete the data transfer before making any changes in the datalogger program. Changing a program and then compiling it will advance the datalogger ’s Stor age Module Pointer to the position of the DSP.
Section 2. Storing Data from Cur rent Dataloggers 2-3 2.1.2 Use of Two Storage Modul es with the 21X or CR7 2.2 *8 and *9 Mode — Keyboard-Initiated Data Transfer 2.
SM4M/SM16M Storage Module User G uide 2-4 2.3.1 Burst Data wi th CR10/10X, CR23X Datalogger s 2.3.2 Burst Data wi th 21X Datal oggers.
3-1 Section 3. The Printer Enable Method of Data Storage If the PE line is high when power is applied, the SM will not store data until the next time PE goes high. Also, if power to the SM is interrupted dur ing transmis sion, data stored since the last time PE went high will be lost.
SM4M/SM16M Storage Module User G uide 3-2 3.2.2 *4 Mode — Output Device Enable While the module will work with *4, data is stored in the module in ASCII format which requir es up to 5 times more memory spac e than binary format.
4-1 Section 4. Storage Module Memory: Details of Data Storage 4.1 File Marks The SM must be disconnected from power for a minimum of 10 seconds to be certain it places a File Mark in the SM when reconnected.
SM4M/SM16M Storage Module User G uide 4-2 4.3 Data Formats – Space Requirements 4.4 Available Storage.
Section 4. Storage Module Memory : Details of Data Storage 4-3 4.5 Bad Data • •.
.
5-1 Section 5. Data Retrieval 5.1 Hardware Logan, UT SM4M SN: SOLID STATE STORAGE MODULE MADE IN USA SC532 9 PIN PERIPHERAL TO RS232 INTERFACE MADE IN USA PERIPHERAL RS232 9227 Figure 5-1 Storage Module Connec ted to a Portable PC via an SC532 Interface 5.
SM4M/SM16M Storage Module User G uide 5-2 PC SM4M/16M Data- logge r Figure 5-2 Communication Via the CR500/510, CR10/10X or CR23X SM4M/16M CR23X PC RS232 CS I/O 9-Pin Cable SC12 9-Pin Cable Figure 5-3 Communication Via the CR23X 5.
Section 5. Data Retrieval 5-3 5.2 Datalogger Support Software 5.2.1 SMS 5.3 Data Retrieval Steps 5.3.1 Windows/ NT PCs 5.3.2 CR500/510, CR10/10X and CR23X Telecommunications Interface.
.
6-1 Section 6. Storing and Retrieving Datalogger Programs 6.1 SMS Storage Module Support Software 6.2 *D Mode — With Datalogger.
SM4M/SM16M Storage Module User G uide 6-2 6.3 Using DSP4 Heads Up Display to Store and Retrieve Datalogger Programs NOTE.
A-1 Appendix A. *9 Mode – Storage Module Commands.
SM4M/SM16M Storage Module User G uide A-2.
B-1 Appendix B. Telecommunications Commands A Status NOTE.
SM4M/SM16M Storage Module User G uide B-2 AA Advanced Stat us nnnnB nnnnC Comma Delineated ASCII Dump nnnnF Binary Dump nnnnnnG Go To Location nnnnnn OD Go To th e Oldest Data 01G Go To Last File 08G .
Appendix B. Telecommunic ations Commands B-3 4H Move Dump Point er To Display Location Pointer 9H Store File Mark in Data nl Dump Program n (n = 1…8) nJ Store Pr ogram n (n = 1…8) nJJ Store Pr ogr.
SM4M/SM16M Storage Module User G uide B-4 1249K Quick Reset abfeL Switch Set tings M or * Disconnect N OS Signatur e.
C-1 Appendix C. Storage Module 9-Pin Connector ± µ µ.
.
D-1 Appendix D. Upgrading the Operating System Collect any data stor ed in the module before upgrading the operating system, as any data held in memory is irreversibl y erased during the upgrade pr ocess .
デバイスCampbell SM4Mの購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Campbell SM4Mをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはCampbell SM4Mの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Campbell SM4Mの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Campbell SM4Mで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Campbell SM4Mを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はCampbell SM4Mの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Campbell SM4Mに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちCampbell SM4Mデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。