Canonメーカー1の使用説明書/サービス説明書
ページ先へ移動 of 31
V ersion 1 Softwar e Instruction Manual This software is for use with Windows ® XP only . E.
2 Read Car efully Befor e Using CANON SOFTW ARE LICENCE AGREEMENT IMPORT ANT : READ THIS AGREEMENT CAREFULL Y BEFORE CLICKING “YES” A T THE BOTTOM OF THE SCREEN AND INST ALLING THE SOFTWARE. This agreement (“Agr eement”) is a legal contract between you, either an individual or entity , and Canon Inc.
3 r egulations, or without all necessary appr ovals. 5. SUPPORT AND UPDA TE Neither Canon, nor its subsidiaries, dealers or distributors will be r esponsible for providing maintenance or support for use of the SOFTWARE. No updates, fixes or support will be made available for the SOFTW ARE.
4 SELLER, SO THE ABOVE DISCLAIMERS AND EXCLUSIONS MA Y NOT APPL Y TO YOU. 7. TERM This Agreement is ef fective upon your acceptance her eof by clicking “YES” below and remains in ef fect until expiration of all copyright interests in the SOFTW ARE unless earlier terminated.
5 Contents Read Carefully Befor e Using .............................................................................................. 2 Read This First ..................................................................................................
6 Read This First DV -PC Recorder is a software that enables you to r ecor d on the tape in the camcorder and on the computer hard disk by connecting a camcor der equipped with the DV CONTROL function to a computer using a IEEE1394 (DV) cable.
7 System Requir ements OS Microsoft Windows XP Home Edition or Pr ofessional (installation of Service Pack 1 recommended) Proper operation is not guaranteed on Windows XP that has been upgraded from a pr evious version.
8 Installing the Softwar e ❍ Do not connect the camcorder to the computer when installing DV -PC Recorder . ❍ Y ou need to log in as an administrator before installing the softwar e. ❍ Close any programs that ar e running befor e installing the software.
9 Installing the Softwar e 5. Click [Finish]. • Installation is complete and DV -PC Recorder starts automatically . •A dedicated driver will be installed automatically . 6. If the [Found New Har dware Wizar d] window appears, select [Install the softwar e automatically (Recommended)] and click [Next].
10 Connecting the Camcor der to the Computer 1. Set the camcor der to a recor ding pr ogram. 2. Activate the DV CONTROL function. For details, r efer to the camcorder instruction manual. 3. Connect the camcor der to the computer using the IEEE1394 (DV) cable.
11 Starting DV -PC Recor der Y ou need to log in as an administrator before starting DV -PC Recorder . 1. Double-click the [DV -PC Recorder] icon on the desktop (or select [DV -PC Recor der] from the [start] menu). DV -PC Recorder starts. 2. Confirm the target folder (video folder) of the video r ecor ding and click [OK].
12 Starting DV -PC Recorder 1 System menu Displays DV -PC Recorder’ s system menu ( 13). 2 [Record] Displays the control panel for r ecor ding the camcorder pictur e on the hard disk ( 22). 3 [Playback] Displays the control panel for playing back r ecor dings saved on the hard disk ( 25).
13 Starting DV -PC Recorder System Menu Clicking on the upper left of the Main Panel (or right-clicking the [DV -PC Recor der] icon on the task bar) displays the system menu. The system menu cannot be displayed while a dialog is shown. 2 1 3 1 Close Closes DV -PC Recorder .
14 Starting DV -PC Recorder Icon DV -PC Recorder Status Not started Stop mode Recording Frame dropping occurr ed ( 23). Cannot recor d ( 29) Check the setting of the video folder . ❍ If [ ] is not displayed, activate the DV CONTROL function of the camcor der .
15 Setting V ideo Folder , File Name and Recor ding Mode Select the settings such as tar get folder (video folder), file name and recor ding mode befor e recor ding the camcorder pictur e on the har d disk. 1. Click . 2. Click the [General] or [Recor d] tab.
16 Setting Video Folder , File Name and Recording Mode [General] T ab 1 2 3 1 Select the video folder settings. [Video folder]: Shows the selected folder . [Performance check]: Checks whether the selected video folder can be used for saving the recor dings ( 18).
17 Setting Video Folder , File Name and Recording Mode [Record] T ab 1 2 3 1 Select the mode for recor ding on the har d disk. [Standard]: A new folder will be cr eated each time you start r ecording a new scene. [Sequence]: The new scene will be added to the same folder .
18 Setting Video Folder , File Name and Recording Mode Performance Check Y ou can check whether the selected video folder can be used for saving the r ecordings befor e you start recor ding on the har d disk. 1. In the [Option settings] window , select the [General] tab, select the video folder , and click [Performance check].
19 Setting Video Folder , File Name and Recording Mode • The performance check takes 30 seconds. •T o cancel the performance check, click [Stop]. 3.
20 Recor ding on the Har d Disk Y ou can r ecord video and audio fr om a connected camcorder on the har d disk of the computer by operating the camcorder or the r ecor ding panel of DV -PC Recor der . ❍ Before you start r ecording: • Make a performance check ( 18) to make sure that the r ecording can be saved to the selected video folder .
21 Recording on the Har d Disk • Recording starts on both the tape in the camcor der and the har d disk. • changes to , and the indicator starts moving. • When the tape r eaches the end, recor ding on the hard disk continues. • When no tape is inserted, or the tape is write-protected, r ecording is saved only on the hard disk.
22 Recording on the Har d Disk 3 4 2 1 6 78 9 10 11 12 13 5 1P r eview Shows the camcorder pictur e. When you have selected [No preview] in the [Option settings] window , the preview does not appear during r ecording. When recor ding in [Sequence] mode, the pr eview starts when you r estart r ecording or finalize the file by clicking .
23 8 Audio level indicator Indicates the audio level of the channels 1 and 2 of the camcorder . The audio level indicator can be turned on/off by clicking / . • The audio level indicator appears slightly later on the computer screen than on the camcor der scr een.
24 Recording on the Har d Disk 2 1 3 1 File name Shows the file name recor ded with DV -PC Recorder . The file information appears when you leave the mouse pointer on the file name for a moment. 2 Information on If frame dropping occurr ed, the position and number of dr opped dropped frames frames are shown her e.
25 Reviewing the Recor ded Pictur e Y ou can r eview the recor ded picture by playing back the file. 1. Click the [Playback] tab. The playback panel appears. 2. Select the file you wish to play back fr om the [File list]. Click the thumbnail of the file you wish to play back.
26 5 [File list] Lists the A VI files. As the default settings, the files in the selected video folder ar e shown and the latest file is listed at the top. : Selects a differ ent folder . : Changes the order of the files. Select an option from the displayed menu.
27 Frame droppings that occurr ed during r ecording ar e indicated in red. Reviewing the Recorded Pictur e 1 2 1 The slider moves to the frame dropping point after the curr ent position. The number of dr opped frames is displayed at the right of this button.
28 Uninstalling the Softwar e Uninstall the software if it has not been installed corr ectly , or if it is not required anymor e. ❍ Close any programs that ar e running, and disconnect the IEEE1394 (DV) cable fr om the camcorder and the computer befor e uninstalling the softwar e.
29 Tr oubleshooting Camcorder will not be r ecognized. ➝ A camcorder not supported by DV -PC Recorder is connected. Check if your camcor der is supported by DV - PC Recorder ( 6). ➝ Another device such as a CD-ROM drive or hard disk drive (or r epeater/hub) is connected to the computer’ s IEEE1394 (DV) terminal.
30 The preview will not be displayed. ➝ If the preview is not displayed during r ecording, it might be set to [No pr eview] in the [Option settings] window . Select a setting other than [No preview]. ➝ When recor ding in [Sequence] mode, the preview starts when you r estart recor ding or finalize the file by clicking .
PUB. DIE-212-N © CANON INC. 2004.
デバイスCanon 1の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Canon 1をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはCanon 1の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Canon 1の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Canon 1で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Canon 1を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はCanon 1の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Canon 1に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちCanon 1デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
