Canonメーカー3.6の使用説明書/サービス説明書
ページ先へ移動 of 55
User’s Manual Viewer Software Ve r . 3.6 E ENGLISH.
2 Introduction Important ....................................................................................... 4 Copyright Information ................................................................... 4 Usage Notice of Audio ......................
3 Using the Viewer for PC ......................................................... 31 “Viewer for PC” Screen .............................................................. 31 Panorama Window .......................................................
4 Important 1 Copyright © 2004 by Canon, Inc. All rights reserved. The unauthorized transfer of all or any part of the contents of this manual is forbidden. 2 The contents of this manual are subject to change without notice. 3 Every effort has been made to ensure that content of this manual is free from errors.
Introduction 5 W ebV iew Livescope Overview ■ WebView Livescope is the system that allows camera control and live video distribution from a remote location. ■ The system is configured for a camera server and viewer software. The camera server distributes live video taken by the video camera to the Internet or an Intranet.
6 LiveApplet Video display functions Camera control functions Glimpse Video display functions Viewer f or Jav a V iewer Overview This is a viewer written using Java. This viewer allows the camera server’s videos to be viewed on any computer with a Web browser that runs Java, regardless of the platform.
Introduction 7 Vie wer for PC This is a viewer that runs as an application. This viewer provides video display and camera control functions and appears in a separate window at startup. While the Viewer for PC has to be pre-installed, it offers the advantage of displaying the first video quickly.
8 Operating Envir onment Viewer f or Jav a V er . 3.6 Viewer f or PC V er . 3.6 Windows 2000 (SP4)/ Windows XP (SP1a or SP2) Netscape 7.1 or 7.2, or Microsoft Internet Explorer 6.0 (SP1 or SP2) Operating System Web Browser * Must be installed in advance from the CD-ROM supplied with the camera server.
Chapter 1 V iewer for Java This chapter describes the preparations required for using the Viewer for Java and explains how to use the viewer..
10 Pr eparations for Using the V iewer for Java The Viewer for Java is automatically downloaded from the camera server. There is no need to install it in advance. However, depending on the type of Web browser you are using and your software settings, you must change your Web browser settings.
View er for J av a 1 11 Using Netscape * For Netscape 7.1 Netscape also has a setting that specifies whether the use of Java is permitted. Select “Preferences” from the “Edit” menu, click “Advanced” and then click in the “Enable Java” checkbox.
12 When You are Connected to a LAN If the camera server is used via an Intranet and you specify the Web browser proxy setting manually, videos are distributed via the proxy. This can result in a slower frame rate and proxy server overload. Use the procedure shown below to set up a “No proxy” connection.
View er for J av a 1 13 ● Use a proxy server for your LAN 1 From the “Tools” menu, select “Internet Options” and click the “Connections” tab. 2 Click “LAN settings” to open the Local Area Network (LAN) Settings dialog box. 3 Tick “Use a proxy server for your LAN” in “Proxy server” and click “Advanced”.
14 ● Manual proxy configuration 1 From the “Edit” menu, select “Preferences”. 2 Select “Proxies” in “Advanced” and select “Manual proxy configuration”. 3 In the “No Proxy for” field, enter “Camera server IP address:HTTP conversion server service port”.
View er for J av a 1 15 ➤ Starting Up the V iewer for Java When the “Using Viewer for Java” button in the Web Browser that displayed the Web page for distributing videos is clicked, the Viewer for Java starts up and connects to the camera server.
16 Using the V iewer for Java “LiveApplet” Screen There are two types of Viewer for Java ( → p.6). The following is a description of “LiveApplet”. “LiveApplet” is a viewer with a GUI that allows the user to change the camera angle, zoom ratio and backlight adjustment settings.
View er for J av a 1 17 6 7 8 9 10 11 P anorama Window * Not available with the VB-C50Fi. You can control the camera by clicking on the panorama window or dragging the yellow frame on the panorama window. The black frame indicates the range of movement for the camera center.
18 Star ting Camera Contr ol Although multiple clients can simultaneously connect to the camera server, multiple clients cannot simultaneously control the camera. Consequently, “control privileges” has been introduced by which only the client who currently holds the control privileges can control the camera.
View er for J av a 1 19 Procedure Contr olling the Camera Once you have been granted camera control privileges, you have complete control over the camera angle, the zoom ratio and the backlight adjustment setting. Move the button on the Pan Scroll Bar or Tilt Scroll Bar.
20 Procedure Changing the Camera Zoom Ratio Move the Zoom Scroll Bar button up or down. The camera zooms in or out to match the position of the zoom bar button. Zoom Scroll Bar Move the button up to zoom in (telephoto). Move the button down to zoom out (wide-angle).
View er for J av a 1 21 Procedure Selecting the Camera When multiple cameras are connected to the camera server, you can switch between cameras. Click on the Camera Selection Box to view the list of cameras. When you select a camera from the list of names, the display changes to show the video from that camera.
22 Procedure Adjusting Backlight Backlight adjustment is useful when the video is dark due to backlighting. When you click the [Backlight Adjustment] button, video darkened by backlighting becomes brighter.
View er for J av a 1 23 Procedure ● Because a new still picture is captured when you click the camera icon, the still picture displayed may be fractionally later than the moment you clicked the icon.
24 “Glimpse” Screen The Glimpse viewer is used only for viewing video; it does not include camera control functions. There are two types of Viewer for Java ( → p.6). The following is a description of “Glimpse”. The “Glimpse” viewer is a light-weight Viewer for Java.
Chapter 2 V iewer for PC This chapter describes the preparations required for using the Viewer for PC and explains how to use the viewer..
26 Pr eparations for Using the V iewer for PC Installing the Viewer f or PC The Viewer for PC must be pre-installed on your PC. For details on installing, please refer to the user’s manual of the camera server you are using. ● Microsoft Internet Explorer 6.
View er for PC 2 27 Using Bro wsers Other Than the Recommended Pr oducts To launch and run the Viewer for PC from a Web browser, the recommended browsers are: Microsoft Internet Explorer 6.0 (SP1 or SP2), and Netscape 7.1 or 7.2. The use of any browser other than these may require some setup measures.
28 Starting Up the V iewer for PC The Viewer for PC can be started up in two ways: From the Web browser that displayed the Web site for distributing videos, or starting it up independently.
View er for PC 2 Viewer for PC 2 29 Connecting to the Camera Server When you use the Viewer for PC to connect to the camera server and monitor, if the Viewer for PC was started up from the Web browser, it automatically connects to the camera server.
30 Selecting a Registered Camera Server and Connecting Procedure Select the connection target from the site selection box. The camera servers displayed here are sites that were registered by selecting.
Viewer for PC 2 31 Using the V iewer for PC The Viewer for PC provides a GUI that allows you to change the camera angle, zoom ratio and backlight adjustment settings. “Viewer f or PC” Screen The functions of the GUI displayed when the Viewer for PC starts up are briefly described below.
32 10 11 12 13 14 15 P anorama Window * Not available with the VB-C50Fi. You can control the camera by clicking on the panorama window or dragging the yellow frame on the panorama window. The black frame indicates the range of movement for the camera center.
View er for PC 2 33 Starting Camera Control Although multiple clients can simultaneously connect to the camera server, multiple clients cannot simultaneously control the camera. Consequently, “control privileges” has been introduced by which only the client who currently holds the control privileges can control the camera.
34 Procedure Controlling the Camera Once you have been granted camera control privileges, you have complete control over the camera angle, the zoom ratio and the backlight adjustment setting. Changing the Camera Angle * Not available with the VB-C50Fi.
View er for PC 2 35 Procedure Changing the Camera Zoom Ratio Move the Zoom Scroll Bar button up or down. The camera zooms in or out to match the position of the zoom bar button. Zoom Scroll Bar Move the button up to zoom in (telephoto). Move the button down to zoom out (wide- angle).
36 c Note Procedure Selecting the Camera When multiple cameras are connected to the camera server, you can switch between cameras. Click on the Camera Selection Box to view the list of cameras. When you select a camera from the list of names, the display changes to show the video from that camera.
View er for PC 2 37 Procedure Changing the Video Source Size If multiple video source sizes are specified on the camera server, these buttons can be used to select the size used for display. Changing the video source size does not change the size of the video displayed.
38 Procedure Adjusting Bac klight Backlight adjustment is useful when the video is dark due to backlighting. When you click the [Backlight Adjustment] button, video darkened by backlighting becomes brighter.
View er for PC 2 39 Menu-based Operations All the functions accessed via buttons can also be accessed from the menu bar. Functions that can only be accessed from the menu bar are discussed on the following pages. * See p.47 for details on using the Camera Site List.
40 e Tip Procedure Saving Still Pictures to Files When the video you want to save appears, click the [Pause/Resume] button. The video is displayed as a still picture. Select “Save” from the “File” menu. When it ends, the video is resumed when you click the [Pause/Resume] button.
View er for PC 2 41 Using the V iewer for PC Procedure 1 2 3 Printing Still Pictures When the video you want to print appears, click the [Pause/Resume] button. The video is displayed as a still picture. Select “Print” from the “File” menu. Specify the print settings.
42 Connection Information ● Protocol WebView-TCP or WebView-HTTP ● Video [WV-TCP] IP address of camera server:port number ● Camera control [WV-TCP] IP address of camera server:port number ● Vi.
Chapter 3 V iewer for PC Settings This chapter describes how to specify the software environment settings for the Viewer for PC..
44 Procedure “Starting protocol” Setting Select “Setup Properties” from the “View” menu. V iewer for PC Settings From the “Setup Properties” window, you can specify a range of settings governing the operation of the Viewer for PC. Normally, there is no need to alter these settings.
View er for PC Settings 3 45 Procedure “HTTP pr otocol” Setting Select “Setup Properties” from the “View” menu and then select the “HTTP protocol” tab. 1 2 Specify these settings when you are connecting using the WebView-HTTP protocol.
46 Procedure “Display option” Setting Select “Setup Properties” from the “View” menu and then select “Display option”. Select “Set video display size used at startup”. 1 2 Use this setting to specify the size of the video displayed at startup.
View er for PC Settings 3 47 Registering and Changing the Server The camera server can be registered beforehand and thereafter you can access the server simply by selecting it from the registered servers. The procedures for registering and changing camera server are described below.
48 Make the changes. Click “OK” to activate the changes. 2 Procedure Changing or deleting registration details in the list Choose “Camera Site List” from the “View” menu, and select the registered camera site that you want to change or delete.
View er for PC Settings 3 49 While a camera site is selected, you can move it to a different position in the list by clicking the Up or Down button. This order is reflected in the list displayed in the Site Selection dialog box.
Appendix Messages displayed in the viewers are explained in this section..
Appendix 51 Err or Messages Message Details Solution too many clients The limit on the number of video server connections has been e xceeded. Access to the camera server is apparently ov ercrowded.
52 Viewer for PC Error Messages Message Details Solution No response from video server . The viewer could not connect to the video server . There is a coding error in the Web page used f or video distr ibution, or there is a problem on the camera server .
Appendix 53 Message Details Solution Couldn’t get camera control privileges. The limit on the number of people queuing f or camera control privileges has been exceeded. Access to the camera server is apparently ov ercrowded. W ait some time and then reconnect.
54 Index A Allowing Java to be used 10 B Backlight adjustment 17,22,32,38 C Camera angle 19,34 Camera control 18,33 Camera control status display 18,33 Camera information display 42 Camera selection b.
PUB NO.YT1-1350-000 © CANON INC.2004.
デバイスCanon 3.6の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Canon 3.6をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはCanon 3.6の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Canon 3.6の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Canon 3.6で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Canon 3.6を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はCanon 3.6の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Canon 3.6に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちCanon 3.6デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
