CanonメーカーBJ-200exの使用説明書/サービス説明書
ページ先へ移動 of 119
BJ-200ex USER’S MANUAL Canon.
Contents Chapter 1 Introduction Features and Benefits Option and Supplies Ink Cartridge Print Media Related Publication Customer Support Servicing the Printer Chapter 2 Setting Up the Printer Unpackin.
Printing on Envelopes Preparing Your Software Turning On the Printer's Envelope Mode Preparing the Printer Turning off Envelope Mode Printing on Legal-size Paper Printing in Landscape Orientation.
DIP Switch Setting BJ-10 Mode Epson LQ Mode Changing a DIP Switch Setting Appendix A Specifications Appendix B Application Notes Printing Envelopes in Microsoft Windows AmiPro 3.
Chapter 1 Introduction Congratulations on your purchase of the Canon BJ-200ex Bubble Jet Printer. We appreciate your choosing this printer to meet your printing needs. The BJ-200ex offers excellent print quality, fast print speed, and trouble-free operation with the convenience of compact size and low cost.
Convenient Paper Handling An automatic sheet feeder holds up to 100 sheets of plain paper, 40 transparencies, or 15 envelopes. Software Compatibility Two resident printer control modes enable the printer to work with a wide variety of software applications: § BJ-10 mode emulates the IBM Proprinter X24E printer.
environment. It includes detailed instructions for setting up and using your printer as well as troubleshooting and technical information. Options and Supplies Canon has an extensive dealer network equipped to offer you supplies as you need them. To find a dealer near you, call the Canon referral service at 1-800-848-4123.
To obtain this manual, call the Canon help desk as listed in the next section. Customer Support Help Desk Canon provides customer support and service for all Canon printer products. If you have any questions regarding your new printer, call the Canon Computer Systems help desk at 1-800-423-2366.
Canada Customer support for Canadian residents is available 24 hours a day (seven days a week) at 1-800-263-1121. In other countries, please contact your Canon dealer. Supplies To order supplies, call Canon Accessories at 1-800-671- 1090 from 9 A.M. to 7 P.
Chapter 2 Setting Up the Printer This chapter describes how to unpack the printer and select a location for setting it up, examines the printer's components, and explains how to assemble the printer.
2. Check to see that you have the following items: § Hardware § Documentation and Diskettes: User's Manual (this manual) Quick Start Guide Product Warranty Card Registration Card Canon Windows .
1. Remove the shipping tape from the outside of the printer. § Remove all pieces of tape. (The shipping tape may not be in the exact locations shown here; just be sure to remove all the tape from the outside of the printer.) § Remove the protector (plastic or Styrofoam) inside the sheet feeder.
Selecting a Location for Your Printer Before you set up your printer, choose the best location for it. Follow these guidelines: § Choose a flat, sturdy surface with enough space for the paper to flow freely into and out of the printer. Angled print stands may cause quality and reliability problems.
§ Place the printer where the temperature is stable and set for human comfort. Avoid areas of excessive heat or humidity as well as direct sunlight. § Do not install the printer near devices that contain magnets or generate magnetic fields (such as loudspeakers or base units of cordless telephones).
Operator Panel.
From the Back.
Inside the Printer Attaching the Power Cord § Use a power supply that is the appropriate voltage and frequency: AC 120 V, 60 Hz 0.5A. This is the standard for an electrical outlet in the United States or Canada. § Use only the power cord that came with the printer.
§ When unplugging the power cord, always remove it by holding the plug and not the cord. To attach the power cord, follow the steps below. 1. Attach the power cord to the AC power receptacle on the back of the printer. 2. Plug the power cord into a properly grounded AC outlet.
1. Make sure both the printer and the computer are turned off. 2. Connect the parallel cable. § Align the cable connector with the printer's interface port so the shapes match. § Gently press the cable connector into the port. § Secure the cable connector by snapping the two wire clips (located on the printer) into the cable connector.
To install the in cartridge, follow these steps: 1. Grasp the sides of the front cover and open it so you can access the cartridge holder. 2. Take the ink cartridge out of its protective packaging. NOTE: Install the ink cartridge immediately after removing it from its protective packaging.
5. Lift the green lock lever on the cartridge holder. 6. Fit the ink cartridge over the yellow mounting base with the print head facing down. § When installed correctly, the label on the cartridge will appear upside down.
7. Push the lock lever down until it locks into place. § Use one hand only to set the cartridge and press the lock lever down. § Make sure there is no resistance when you press on the lock lever.
from drying out. The cartridge will not cap and may dry out or clog in the following cases: § If you unplug the printer while it is printing. § If you power off the printer via a power strip while it is printing. § If you move the ink cartridge from the home position.
Cleaning the Print Head The print head on a new ink cartridge needs to be cleaned to ensure the best possible print quality. The printer automatically cleans the print head when you follow these steps: 1. Make sure the printer is turned on and on-line.
2. Pull the paper support up until it stops and pull out the paper output tray. 3. Fan the paper. § For best results, fan the paper before loading it.
4. Slide the stack of paper into the sheet feeder until it stops. § Align the edge of the paper with the right edge of the sheet feeder. § Secure the stack with the paper guide.
To check that you have properly set up the printer, you can print one of the printer's test patterns. The test patterns are described in detail in the next chapter. For now, print Demo Print 1: 1. Press the POWER button to turn off the printer. § Wait a few seconds.
on your computer. The printer driver takes the information from your application and translates it into a language the printer can understand. If you are using Microsoft Windows 3.1 applications, install the Windows printer driver and Visual Guide as described in the next section.
For faster printing operations in Windows, do not use the Windows Print Manager. Using the Visual Guide When the SETUP program is complete, you can start the Visual Guide and take a look at its features. Simply open the BJ-200ex icon in the Program Manager.
select the printer settings that you will normally use. Later, from within each of your software applications, you can select the printer settings that are unique to the current print job.
Managing Your Printer's Features You select and control the printing features of the BJ-200ex printer with your software application, with the printer's operator panel, or with the printer's DIP switches. Each method allows you to select some or all of the printing features that control the appearance of your printed documents.
clean the print head, start a printer self test, and turn on automatic line feeds. See Chapter 5, Using the Operator Panel , for details. DIP Switches The printer's DIP switches allow you to set the default printer configuration settings, such as paper and envelope size, text lines per page, character sets, and so on.
The faster the processor, and the more RAM you have, the faster you can print on your BJ-200ex Bubble Jet Printer. Page Printers and Processing With page printers, the computer and the printer share the processing load.
Chapter 3 Using the Printer This chapter describes how to use the printer for all your printing operations, such as printing documents, single sheets, special papers, and envelopes. It includes how to print the self tests as well as print on legal size paper and print in landscape orientation.
§ If the print density of your page is very high, light paperstock may curl slightly due to the large amount of ink. If you need to print heavy graphics, try printing on heavier stock. § Do not use thicker paper than meets the specifications for this printer.
Always set the paper thickness lever before and after printing on thick paper or envelopes. If you are printing documents with high density graphics or ink and the printed pages are smudges, try setting the paper thickness lever to the right position.
§ The front position is for automatic loading of envelopes and for manually feeding any type of print media. § Do not move the paper selection lever after loading paper in the sheet feeder. § This lever is different from the lever on a typewriter or dot matrix printer.
to the front position, the lever inside the printer moves so that the single sheet being fed can advance into the printer. It is important that you set the paper selection lever to the correct position based on how you plan to feed paper.
When you want to print a multiple page document, load a stack of papers in the sheet feeder. The printer automatically feeds each sheet when your software application tells it to start printing the page. How you actually print from within a program is dependent on the application.
2. Make sure the paper selction lever is set to the back position. 3. Extend the paper support and the paper output tray. § Pull the paper support up until it stops. The paper support keeps paper straight and limits the possibility of jams. § Extend the paper output tray.
4. Fan the paper § For best results, fan the paper before loading it. § Always fan a stack of paper along the edge that will feed into the printer first. 5. Slide the stack of paper into the printer until it stops. § Align the edge of the paper with the right edge of the sheet feeder.
Do not force the paper into the printer. 6. Adjust the paper guide to the stack of paper. § This keeps the paper feeding straight into the printer and reduces skewing. § Be sure there is no gap between the paper guide and the edge of the stack of paper.
7. Make sure the printer is turned on and on-line. Start your print operation. Auto Feed Guidelines When automatically feeding stacks of paper, follow these guidelines: § Do not leave paper stacked in the printer for long periods of time; longer sheets of paper may become bent or curled over time.
§ Make sure there are no gaps between the stack of paper and the paper guide nor the right edge of the sheet feeder. Printing Single Sheets When you want to print a single page or thick paper, you can manually feed single sheets of paper. Specifying Manual Feed In the Windows driver, you must select Manual Feed for the Paper Source.
2. Open the top cover and check the paper thickness lever. § If you are manually feeding thick paper or transparencies, set the paper thickness lever to the right.
4. Extend the paper support and the paper output tray. 5. Insert the single sheet. § Slide in the paper until it stops inside the sheet feeder and hold it for about two seconds. § Align the sheet with the right edge of the sheet feeder. § Adjust the paper guide to the sheet.
6. Start your print operation. § If you are using Windows, you must select Manual Feed using the BJ-200ex printer driver for the printer to accept manually fed paper. § After printing on thick paper or envelopes, set the paper thickness lever (inside the printer) to the left before printing on normal paper.
When you are ready to print on transparencies, open your document withing your software application and define any special print options you can from within your print driver. For example, if you are using Windows, you can specify the Paper Size, Media Type, Paper Source, Print Selection, and Print Quality from within the printer driver.
U.S. Commercial number 10 (COM 10) envelopes and European DL envelopes are recommended. You may be able to stack envelopes of other sizes in the sheet feeder; however, Canon cannot guarantee consistent performance on envelope sizes other than COM10 and DL.
§ The printer beeps once and the indicator light for the current print mode blinks rapidly. § Press ON LINE to set the printer on-line. § Use the envelope mode only when you are loading envelopes; do not use this mode when loading regular or thick paper.
3. Move the paper guide to the left to match the width of the envelopes. 4. Extend the paper support and the paper output tray. 5. Prepare the envelopes. § Arrange the stack of envelopes on a firm surface and press down firmly on the edges to make the folds crisp.
7. Adjust the paper guide to the stack of envelopes. When printing on COM10 envelopes, move the paper guide all the way to the left. Depending on the size and shape of your interface connector, the paper guide may touch it. If this causes the envelopes to misfeed, use an interface cable with a smaller connector.
8. Make sure the printer is on-line and start your print operation. Turning Off Envelope Mode After printing on envelopes, follow these steps before loading normal paper again: 1. Set the paper selection lever (on the right side of the sheet feeder) to the back position.
If you are using an application that does not include a page setup or printer setup procedure, you may be able to use the ESCape sequence to specify your page length. Applications handle ESCape sequences differently, so refer to your application's software manual for instructions on sending commands.
If you are not using Windows, you can consider many other software packages that offer landscape font capabilities, sucj as: Quatro Pro 3.0 Lotus 2.4 Geoworks WordPerfect 6.0 for MS-DOS The following font packages work with the specified software applications.
To print the test patterns, you must be automatically feeding paper. Make sure the paper selection lever is set to the back position. Use letter-size or A4-size paper when printing the test patterns. If you attempt to print on a smaller sheet, ink will get on the platen.
In Epson LQ mode, the self Test looks like this: Font List You can print this sample in both printer control modes: BJ-10 mode or Epson LQ mode. The printer prints all characters in the available print styles and pitches. Starting To start the Font List, follow these steps: 1.
§ The printer starts to print the Font List. Stopping To stop printing the Font List, press and hold the ON LINE button for one second. The printer stops printing, ejects the current sheet of paper, and goes back on-line.
To start the Demo Prints, follow these steps: 1. Press the POWER button to turn off the printer. 2. To start Demo Print 1: press and hold the ON LINE button, and press the POWER button until the beeper sounds twice. § The two beeps are approximately three seconds apart.
§ The ON LINE light will go off; the printer will stop printing and go off-line. 2. To start printing again, press the ON LINE button. 3. If data remains in the print buffer, the ON LINE light blinks. § To print the data, press the ON LINE button to set the printer off-line and then press the FF button.
Chapter 4 Using the Printer With Your Software Your printer will work with a wide variety of applications, such as spreadsheet, word processing, and graphics programs.
If you are not using Windows, see the section Setting Up MS-DOS Software Applications (later in this chapter) for information on how to install another printer driver and select a printer control mode. Printer Setup Within Windows After you install the Canon BJ-200ex printer driver, you can run the Windows Setup program to change printer settings.
Orientation for your print job. You can use these options in any combination. see the next section for more detailed Information about the options. 6. Once you select the options you want to use, click on the OK button to close the Canon BJ-200ex setup dialog box, and then click on the OK button to close the Print Setup dialog box.
215.9 mm). The length can be from 4.1 to 14 inches (104.1 x 355.6 mm). Media Type option Click on the arrow next to the Media Type setting to select one of the following types of paper from the drop-down list: When you select the Media Type, the Windows driver changes printer modes.
When using manual feed, it is a good idea to turn off the Print Manager in the Printers dialog box. If you are feeding paper manually and using the spooler, the printer goes off-line before printing each page to allow you to insert paper. When you select Manual Feed, be sure to set the paper selection lever on the printer to the front position.
setting reduces the resolution to improve your application's processing time. Use this setting to print draft copies of your work. § Normal (center) - Use this mode for your best quality text and simple graphics. The printer prints at a resolution of 360 x 360 dpi.
These options allow you to select the halftone method you want to use, and increase or decrease the intensity of the printed images. Halftone This option is available only when the Print Selection is grayscale.
The diffusion setting may help eliminate banding problems when printing grays on all black images. Intensity You can use this option to adjust the Intensity of the printed image. Click on the arrows to make the image darker or brighter, or drag the slider box right or left along the bar.
5. Select OK to close the Printer Setup window. 6. Choose Print from the File menu. 7. After making any necessary changes to the printing parameters, select OK to start the print job. It's a good idea to turn off the Print Manager if you are feeding paper manually.
§ Free up your memory Use only one software program at a time and unload any screen saving utilities or programs stored in Windows background; this frees up more memory for Windows processing. § Use Black and White when possible If you will be printing text in black ink only, choose Black and White rather than Grayscale.
Because most of the print is actually the processing time needed for the computer to prepare the print file, background printing does not usually give you any real advantage. Foreground Printing If the Print Manager is not active (turned off), the print file that your application and printer driver create is sent directly to the printer.
Software applications are designed to work with specific hardware setups. Most Application programs include an installation program or routine that you run to identify the type of hardware you are using, such as your computer and printer.
Epson LQ-1050* Epson LQ printer * These printers support paper that is wider than 8.5 inches. After selecting a printer, you can use software commands for all the standard printer functions through the application program. This includes bold or double-strike printing, underlining, subscripts, margin control, line-spacing control, and graphics.
Script Not available 10 cpi, 12cpi, 15 cpi, 17 cpi, 20 cpi, PS Orator Not available 10 cpi, 12cpi, 15 cpi, 17 cpi, 20 cpi, PS Orator-S Not available 10 cpi, 12cpi, 15 cpi, 17 cpi, 20 cpi, PS * In Epson LQ mode, if you select Sans Serif, the printer uses the Gothic font.
6. At the Print Options menu, type S to select printer. 7. At the Select Printer menu, type 2. 8. At the additional Printers menu, highlight the BJ-200ex driver and press Enter. If you select the BJ-200ex LQ driver, make sure you set DIP switch 11 to ON for Epson LQ mode.
specific format, such as decimal rather than hexadecimal. For example, you can use only decimal format with MultiMate Advantage II, Professional Write, and PFS: First Choice. Software printer drivers may override the printer control codes embedded in a document.
Chapter 5 Using the Operator Panel This chapter provides information on using the operator panel located on the top of your printer. You can control basic printer operations and mechanics through the operator panel. The indicator lights reflect the currnet status and modes of the printer.
Form feeding If you are loading paper, make sure the printer is off-line. Press the LF/FF button to load the first sheet of paper to its top of form. (If you are running a software application, you don't need to perform this step. The application will tell the printer when to load paper.
Select your print mode as follows: § Use HQ mode for most of your printing needs. The printer automatically prints in HQ mode unless you change the mode with the PRINT MODE button. § Use the smoothing mode when you are printing enlarged characters with an MS-DOS application.
When using reduction mode, you must select the correct paper size within your application. In the example above, you would specify a paper size of 11.75 x 16.
2. Press and hold the LF/FF button. 3. Press the PRINT MODE button. § The printer beeps twice and the indicator for the current print mode blinks to indicate the printer is in 2/3 reduction mode. § To set the printer in 1/2 reduction mode, press and hold the LF/FF button and press the PRINT MODE button again.
Chapter 6 Maintaining the Printer This chapter covers the care and maintenance of your Canon Bubble Jet Printer BJ-200ex. This includes guidelines, cleaning the printer, replacing the ink cartridge, and transporting the printer.
Be very careful when cleaning the printer. Follow these steps: 1. Make sure the printer is turned off; then unplug it. 2. Clean the platen and its surrounding area inside the printer. § Use a soft cloth to remove any ink mist or paper debris. § Do not use any oil or cleanser inside the printer.
You may need to replace the ink cartridge when the following condition exist: § You have been using the cartridge for over one year. § Your printed output is not crisp and clear, or there are gaps in the characters (missing dots). § Your output has no ink on it.
§ It must be able to be heated and cooled over 6,000 times per second without clogging. § It must dry very quickly without bleeding into other colors. § It must work with different media and software, while providing correct color matching with the printer driver.
4. Take the new ink cartridge out of its protective packaging. § Slide off the orange protective cap from the print head and then remove the orange tape. Install the ink cartridge immediately after removing it from its protective packaging. 5. Fit the ink cartridge over the yellow mounting base with the print head facing down.
Avoid touching the yellow mounting base on which you place the cartridge--especially the circuit board on the side of the mounting base and the film cable that extends from the catridge holder.
Do not move the ink cartridge after installing it. Moving the ink cartridge to the left and leaving it there may uncap the print head and cause it to dry out. 8. Close the front cover. When you are not using the printer, make sure the ink cartridge is in its home position, which is on the right side of the printer.
Storing Ink Cartridges Follow these guidelines when storing your ink cartridges: § Keep a new ink cartridge in its sealed container until you are ready to use it. § Store the ink cartridge at room temperature. § Install the ink cartridge in the printer immediately after you open the sealed container.
6. Close the front cover. 7. Return the paper rest and paper exit support to their original positions. 8. Repack the printer in its original packing materials. Do not remove the ink cartridge from the printer or ship an ink cartridge from which you have removed the protective cap.
Chapter 7 Troubleshooting This chapter contains information to help you solve printer problems. A problem may have one or a combination of causes, including a malfunction in your computer, software, the printer cable, or the printer. Many printing problems are related to how your software interacts with the printer.
Splashed dots Paper edge is soiled with ink Output Appears Jagged Windows Problems Printer does Not Print or Prints Garbage Printer does not print from Windows (but does print from MS-DOS) Output is n.
The following table describes problems and solutions related to the ERROR light. Problem Cause Solution ERROR light is on The printer may be out of Paper. Check the sheet feeder. If the printer is out of paper, load paper into the sheet feeder and press the ON LINE button to continue printing.
between the ink cartridge and the holder. Perform the print head cleaning procedure described in Chapter 6, Maintaining the Printer. If cleaning the print head does not resolve the problem, your ink cartridge my be out of ink. Replace the ink cartridge and try printing again.
§ For envelopes, set it to OFF. § For A4 size paper, set it to ON. Printout does not match paper size. Paper size selected in driver may be incorrect. Make sure the paper size you select within your printer driver matches the oreientation in which you load the paper in the printer.
If you are having paper loading problems, check the problems and solutions in the following table. After solving a paper loading problem, remove the paper and load it correctly. Then press the ON LINE button to set the printer on line again. Any of the following paper loading problems may cause the paper to jam in the printer.
Envelopes may not be loaded correctly. Make sure the envelopes are loaded properly: § The top of the envelope goes in first. § The flap is toward the sheet feeder. § The right side of the envelope is aligned against the right side of the sheet feeder.
The print resolution set in the printer driver may be 180 dpi and the printer print mode may be HS mode. When printing in Epson LQ mode, printing at 180 dpi in HS mode may cause white streaks. To remedy, select the HQ mode with the printer control panel.
Printer does not print from Windows (but does print from MS-DOS) Your computer is having a problem communicating with the printer. Follow these steps: 1. Select the Main group from the Program Manager. 2. Double Click on the Control Panel. 3. Double Click on the Printer icon.
between text or graphics driver is VGA. the Windows Setup icon. If the display driver is anything other than VGA, call the display manufacturer and request an updated display driver. In the meantime, install the standard VGA driver that came with Windows 3.
the AUTOEXEC.BAT file and change the directory to a valid directory; for example: SET TEMP = C:DOS In WordPerfect, the BOX prints but the text does not The Fast Graphic Printing option needs to be enabled (5.2) or disabled (5.1). If you are in WordPerfect 5.
4. Press the POWER button to turn the printer back on. The POWER, ON LINE, and HQ (or HS or SMOOTHING) lights come on and the print head moves to the home position. The printer is now ready for printing. If you are printing high density graphics when a paper jam occurs, feed at least two sheets of paper through the printer to clean the rollers.
Chapter 8 Customizing the Printer This chapter describes the factory default settings of the printer and the steps you follow to customize these settings for your particular printing needs. You will find that the factory default settings provide features to meet most of your printing needs.
Smoothing mode Disabled Reduction mode Disabled Alternate Graphics Mode Disabled Automatic emulation switching mode Disabled The default setting is BJ-10 mode.
11 inches. If you are using A4-size paper, set this switch ON ; this sets the page length to 12 inches. DIP switch 4 DIP switch 4 When this switch is OFF, the printer uses Character Set 1.
Setting DIP switch 12 ON reduces the input buffer by 21 KB. When using Windows, set DIP switches 10, 11 and 12 OFF to maximize the size of your input buffer (62 KB). § If the printer does not seem to be switching between BJ-10 and Epson LQ mode, disable this function and set DIP switch 11 to match your application's printer driver.
Graphics character set, which is the same as the MS-DOS code page 437 (this character set includes sysmbols, lines, corners, and European characters). To see samples of the character sets available in Epson LQ mode, use Canon's toll-free fax retrieval system.
§ Pull the cover toward you lifting from the notch at the top of the cover. § You may need to use a thin object, such as a coin, to release the cover. The cover slides down into the printer. 3. Use a pointed object, such as a ballpoint pen, to change the DIP switch settings.
Appendix A Printer Specifications This appendix lists the specifications of your printer. Printing Method Printing Method Bubble jet ink on-demand Paper Handling Paper Handling Automatic feed Manual feed Sheet Feeder Capacity Maximum thickness of stacked paper = 0.
Horizontal a = 8.3 to 8.5 in (210 to 216 mm) b = 0.25 in (6.4 mm) -- Letter-size paper b = 3.4 mm (0.13 in) -- A4-size paper Vertical c = 11 to 14 in (279 to 356 mm) d = 0.
Envelopes: Horizontal a = 9.5 in -- Commercial number 10 a = 220 mm for DL size b = 0.25 in (6.4 mm) c = 1.24 in -- Commercial number 10 c = 10.4 mm for DL size Vertical d = 4.125 in -- Commercial number 10 d = 110 mm for DL size e = 0.67 in (17 mm) f = 1.
.
European paper sizes: Resident Printer Control Modes BJ-10 mode: IBM Proprinter X24E emulation Epson LQ mode: Epson LQ-510 emulation Line Feed Pitch BJ-10 mode: 1/6", 1/8", n /60", n /7.
Pitch: BJ-10 mode 10 cpi, 12 cpi, 17 cpi, and PS Epson LQ mode 10 cpi, 12 cpi, 15 cpi, 17 cpi, 20 cpi, and PS Cell Composition: 36 (h) x 48 (v) dot matrix in HQ mode 18 out of 36 (h) x 48 (v) dot matr.
Download buffer: 0 KB (or 41 KB) Epson LQ mode Input buffer: 23 KB Download buffer: 39.4 KB Automatic emulation mode Input buffer: 21 KB Download buffer: 41 KB (BJ-10 mode, DIP switch 10 ON) 0 KB (BJ-10 mode, DIP switch 10 OFF) 39.
Appendix B Application Notes This appendix contains information on using specific software applications with your Canon BJ-200ex Bubble Jet Printer. Many popular applications are covered here. Although the software versions described may not be the latest or may not be the version you have, these solutions presented may apply to other versions.
Method 2 To print envelopes in Microsoft Publisher, follow these steps: 1. Start the Windows Control Panel. 2. Double click the printers icon. 3. Select the Canon BJ-200ex Bubble Jet Printer. 4. Set up the following options on the printer: Portrait, Envelope, and Manual feed.
4. If you are printing multiple envelopes, check on the Avoid Using Device Capabilities for Paper Sizes box. An X appears in the box. Now choose OK. The Avoid Using Device Capabilities for Paper Sizes box affects all documents output to the printer. If you are not printing multiple envelopes, make sure this option is unchecked.
2. If you have set up the envelope size, go to Layout and choose Page. 3. Choose Paper size, Make sure the size is 9.5 x 4.12 inches and the diagram shows the paper in wide format. If not, choose Edit and make the corrections. 4. Next, you see the Envelope Editor screen.
デバイスCanon BJ-200exの購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Canon BJ-200exをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはCanon BJ-200exの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Canon BJ-200exの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Canon BJ-200exで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Canon BJ-200exを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はCanon BJ-200exの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Canon BJ-200exに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちCanon BJ-200exデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。