CanonメーカーMultiPASSTM L6000の使用説明書/サービス説明書
ページ先へ移動 of 24
Congratulations on your purchase of the Canon MultiPASS™ L6000 Laser Printer - Fax - Copier - Scanner. This Quick Start Guide describes the steps you follow to unpack and set up your new multi-talented printer. Quick Start Guide Laser Printer Fax Copier Scanner TM TM See What W e Mean.
1 Carefully remove all items from the box. Remove the items from the documentation package. Remove these hardware items from the top tray: 2 Important! Before you start, make sure you have the following computer setup. (These are the minimum requirements.
3 Make sure your documentation package includes these items. 2 MultiPASS L6000 and Creative Web Solutions CD (INSTALL ME FIRST) Quick Start Guide (this booklet) User's Manaul Important ! Save your sales receipt for proof of purchase in case your MultiPASS requires warranty service.
Setting Up the MultiPASS L6000 5 Peel the clear protective sheet off the LCD display. 4 With the paper rest tilted toward you, fit the tabs on the paper rest into the slots above the multi-purpose tray. Place the main unit of the MultiPASS L6000 on a level surface with plenty of room to work.
5 Attach the extension tray. 3 Lift up the front of the MultiPASS L6000 unit. Slide the extension tray into the rails on the bottom of the unit. The paper loading label is included with your MultiPASS unit. Attach the label to the left of the multi-purpose tray.
6 Attach the support trays. 4 There are two identical support trays. One of the support trays holds paper as it comes out of the facedown delivery slot. To install this support, insert the tabs into the corresponding slots above the facedown delivery slot, making sure that the smaller tab is on the left.
7 Connect one end of the supplied telephone line to the jack on the side of the MultiPASS. 1 Connect the phone line. Connecting the Phone Line(s), Printer Cable, and Power Cord L Connect the other end of the line to the telephone jack in your wall.
7 Connect one end of the supplied telephone line to the jack on the side of the MultiPASS. 1 Connect the phone line. Connecting the Phone Line(s), Printer Cable, and Power Cord L Connect the other end of the line to the telephone jack in your wall.
Connect a bi-directional parallel cable to the MultiPASS. 3 Make sure the computer is turned off. You can purchase a Centronics-compatible, parallel cable with bi-directional capability from your dealer or from any computer store. Make sure the cable is IEEE 1284-compliant.
9 Plug the power cord connector into the back of the unit. 4 Attach the power cord. Plug the other end of the power cord into a properly grounded AC outlet (three-pronged outlet). The MultiPASS L6000 is equipped with a 3-prong, grounding-type plug (the third pin is a grounding pin).
10 Open the front cover. 1 Press the release latches on the sides of the unit and gently pull the cover forward. Installing the FX-3 Toner Cartridge Spilled toner can stain any surface. Open the FX-3 Toner Cartridge very carefully. See your User's Manual for complete details on toner cartridge maintenance.
11 3 Insert the toner cartridge into the unit. Place the cartridge on a flat clean surface, and steady it with one hand. Remove the seal by pulling on the plastic tab with your other hand. Use a firm, even pull to remove the plastic seal. To avoid breaking the seal, do not jerk on it unevenly.
12 Close the front cover. 4 Gently press the cartridge into the unit as far as it will go. Press down and back on the cartridge's handle. When it is ready to operate, the MultiPASS displays the date and Receive Mode. This is called the Standby mode.
13 Loading a Stack of Paper Fan a stack of paper. 1 Fan the edge that will feed into the MultiPASS first; then tap the stack on a flat surface to even its edges. 2 Open the paper guides. Open the paper guides to the approximate width of the stack of paper.
14 Insert the stack of paper. 3 Adjust the paper guides to the width of the paper. 4 Make sure there is no space between the paper guides and the stack of paper. Your MultiPASS L6000 is now ready to print. Avoid mixing new paper with paper remaining in the tray.
15 The MultiPASS L6000 Software The MultiPASS L6000 comes with the following software: MultiPASS L6000 Printer Driver, MultiPASS Desktop Manager for Windows 95, and ScanGear for MultiPASS. Once all of this software is installed, you have access to all the printing, faxing, copying, and scanning capabilities of the MultiPASS L6000.
16 The Automatic Installation Procedure Your MultiPASS L6000 comes with a Master Installer that makes installing the MultiPASS software easy and fast. The Master Installer starts up and loads the software in this order: Start up your system and start Windows 95.
Starting the Installation Procedure Make sure Windows 95 starts. Be sure to wait for Windows to complete each operation. Insert the Install Me First CD into your CD drive. Make sure “Driver from disk provided by hardware manufacturer” is selected and click OK .
18 The Master Installer starts. 3 Follow the instructions on the screens. Installation Guidelines Press Next to move from one screen to the next. Make sure you are pressing Next or OK on the current dialog box. Be sure to wait for Windows to complete each setup procedure.
19 Setting Up Your Faxing System During the installation of the MultiPASS Desktop Manager, you define the basic faxing elements of your MultiPASS system, including: Fax header Your name and number; this information is then printed on the top of each fax you send.
20 During installation of the AT&T WorldNet Service software, you will be prompted to dial into the network to complete the registration process. Make sure your modem line and phone line are available.
21 Whether online or off-line, 24 hours a day, 7 days a week, AT&T will provide world-class technical expertise and fast, reliable responses to your questions about AT&T WorldNet Service. To reach AT&T WorldNet Customer Care, call 1-800-400-1447 .
22 Running Creative Web Solutions Software 1. Make sure your modem and phone line are available. 2. Double click the Connect to AT&T WorldNet Service icon on your desktop. 3. Click Connect . Running AT&T WorldNet Service including Microsoft Internet Explorer: 1.
Congratulations You are now ready to start using your new MultiPASS L6000. For additional information on the features and operation of your MultiPASS, see your User's Manual . Canon Customer Care Center As an Energy Star ® Partner, Canon U.S.A., Inc.
デバイスCanon MultiPASSTM L6000の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Canon MultiPASSTM L6000をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはCanon MultiPASSTM L6000の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Canon MultiPASSTM L6000の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Canon MultiPASSTM L6000で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Canon MultiPASSTM L6000を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はCanon MultiPASSTM L6000の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Canon MultiPASSTM L6000に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちCanon MultiPASSTM L6000デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。