AEGメーカー6500 Kの使用説明書/サービス説明書
ページ先へ移動 of 36
6500 K Cer amic Glass Hob User Instructions.
2 Dear customer , Please read these oper ating instructions through car efully . Above all, please observe the “Safety“ section on the first few pages. Please r etain these oper ating instructions for futur e refer ence. P ass them on to any subsequent owners of the appliance.
Contents 3 CONTENTS Operating Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Disposal . . .
Contents 4 What to do if ... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 Service and Spare Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 Customer Care . . . . . . . .
Safety 5 OPER ATING INSTRUCTIONS 1 Safety The safety aspects of this appliance comply with the accepted technical standar ds and the German Appliance Safety Law . However , we also consider it our obligation as a manufacturer t o make you aware of the following safety information.
Safety 6 Safety When Cleaning • For safety reasons do not clean the appliance with a steam jet or high pressur e cleaner . • Clean the hob in accor dance with the maintenance and cleaning instructions in this manual. How to Avoid Damage to Y our Appliance • Do not use the hob as a work surface or for storage.
Disposal 7 Disposal Disposing o f packaging material All materials used can be r ecycled. The plastics ar e marked as follows: • >PE< for polyethylene, e.g. as used for the outer wr apping and the bags inside. • >PS< for polystyr ene foam, e.
The Key Features of Your Appliance 8 The K ey Featur es of Y our Appliance • Cer amic Glass Cooking Surface : the appliance has a VITRAMIC ® cooking surface made of cera mic glass and 4 fast heating cooking zones. The particularly powerful radiant heater elements significantly shorten the amou nt of time taken for the zones to heat up .
Appliance Description 6500 K 9 Appliance Description 6500 K Cooking zone dimensions: r ear left: 145 mm r ear right: 180 mm fr ont left: 2 1 0 mm fr ont right: 145 mm H e at Setting Sele ct ion “+ .
Appliance Descri ption 6500 K 10 Contr ol panel 6500 K Mains “On/Off“ button n For switching on the appliance. The appliance is: – switched on when the button is touched for appr ox. one second, – switched off when the button is touched again for one second.
Appliance Description 6500 K 11 Heat setting selection + and - For setting or adjusting the heat setting ( ! to ) ) on the selected cooking zone. – The heat setting is incr eased using the + button and the automatic warm up function activated. – The heat setting is lower ed using the - button.
Cooking zone safety switch 12 1 Cooking zone safety switch If, after a set period of time, one of the rings is not switched off or the heat setting not changed, the cooking zone switches off automatically . j , or h appears in the displays of all the rings that are switched on.
Before Using for the First Time 13 Befor e Using for the First Time Cleaning for the first time Wipe the ceramic glass cooking surface with a damp cloth to remove any tr aces left fr om manufacturing. 1 Important: Do not use any caustic, abr asive cleaner s! The surface could be damaged.
Operation of the Cooking Surface 14 Cooking with the automatic warm up function All four rings on the cooking surface have nine heat settings and ar e equipped with an automatic warm up function. – ! , lowest heat setting – ) , highest heat setting – a , automatic warm up function.
Operation of the Cooking Surface 15 3 If you select a higher setting when the automatic function is in oper a- tion, e.g. from § to % , the pr evious warm up time is taken into account. If you select a lower setting, then the automatic warm up function is br ought to an immediate end.
Operation of the Cooking Surface 16 Locking/unlocking the contr ol panel At any time during the cooking process, the contr ol panel can be locked, with the exception of the “ On/Off “ button. By this means acci- dental changes to the settings can be pr evented.
Tables and Tip s 17 T ables and Tips Pa n s The better the pan, the better the r esults. • Y ou can recognise good quality pans by the base of the pan. • The base should be as thick and flat as possible. Rough bases (e.g. on cast iron pans) will scratch the cooking surface when slid.
Tables and Tips 18 Y ou will waste ener gy if the.... Tips for cooking with and without the automatic warm up function The automatic warm up function is suitable for: • dishes that start off cold, ar e heated up at a high setting and do not need to be continually watched when co oking, • dishes that ar e put in a hot frying pan.
Tables and Tip s 19 T ypical Heat Settings The figures given in the following tables are for guidance only . Exactly which heat setting needs to be used depends on the quality of the pans and the type and quantity of the food. T able: Co oking and Frying Switch Setting Automatic War m Up Time * (Min.
Cleaning and Care 20 Cleaning and Car e Cer amic glass cooking surface It is important to clean the cooking surface after each use. 1 Important! Never use aggr essive cleaner s such as, for example, coarse scouring cleaner s or pan cleaner s that scr atch.
Cleaning and Care 21 Stubborn Soilage Residues from food that has boiled over Fir st soften these using a wet cloth and then r emove residues using a glass scr aper . 1 Caution! T ake car e when using a glass scr aper . Then clean the cooking surface with the r ecommended cleaners.
Cleaning and Care 22 Spots Scale, shiny pearl like spots, metallic ir i- descent coloured spots, and food r em- nants from pans that have formed during cooking are best r emoved when the cooking zones ar e still warm . Use the cleaner s and polishes recom- mended.
What to do if ... 23 What to do if ... A fault may have been cau sed by a minor opera ting error , which you can correct your self with the help of the following instructions. Do not attempt any further repair s if the following instructio ns do not help in the specific case.
What to do if ... 24 .... the cooking zones do not heat up, even though the displays are working? 0 Check whether – demonstration mode has been activated accidentally . T o deactivate this mode, ensure tha t the appliance is switched off and that the contr ol panel is not locked.
What to do if ... 25 .... f is shown in the display? 0 Check whether – a pan that is too small is on the cooking zone. – the cooking zone has been overheated. If a cooking zone button is pressed and the pan on the cooking zone is too small, f (F ault) appears in the display .
What to do if ... 26 SERVICE AND SPAR E P ARTS In the event of your appliance r equiring service, or if you wish to pur- chase spare parts, contact your local AEG Service Force Centre by tele- phoning 087 05 929 929 Y our call will be automatically r outed to the Service Centre covering your post code ar ea.
What to do if ... 27 GUAR ANTEE CONDITIONS Guarantee Conditions AEG offer the follow ing guarantee to the first pur chaser of this a ppliance. 1. The guar antee is valid for 12 months commencing when the appliance is handed over to the first r etail pur chaser , which must be verified by purcha se invoice or similar docu- mentation.
Technical Data 28 INSTALLATION INSTRUCTIONS 1 Important! This appliance must be installed by qualified personnel, accord ing to the manufacture r ’ s instructions and to the r elevant British Standards. Please observe this instruction, otherwise the warranty will not cover any damage that may occur .
Regulations, Standards, Dir ectives 29 Regulations , Standar ds , Dire ctives This appliance meets the following standards: • EN 60 335-1 and EN 60 335-2-6 in r espect of the safety of electrical appliances for household use and similar purposes and • DIN 44546 / 44547 / 44548 in r espect of properties of electrical cooker s for the household.
Installing and Connecting Up 30 Installing and Connecting Up Installing 1 Important: The new appliance may only be installed and connected up by an approved in staller . Please observe this instruction, otherwise the guarantee will not cover any damage that may occur .
Installing and Connecting Up 31 • For prot ection against moisture, all cut faces are to be sealed with suitable se aling material. • On tiled work surfaces, the joints in the area wher e the hob sits must be completely filled with gr out. • On natur al, artificial stone, or cer amic tops, the snap action springs must be bonded in place.
Installing and Connecting Up 32 min. 5 mm min. 25 mm.
Installing and Connecting Up 33 Electrical connection Assembly and connection of the new appliance may only be performed by an approved installer . Please observe this instruction, otherwise the guarantee will not cover any damage that may occur .
Installing and Connecting Up 34.
Installing and Connecting Up 35.
AEG Hausger ä te Gm bH P ostfach 1 036 D-90327 Nur emberg http://www .aeg.hausgeraete.de © Copyright by AEG ANC 822 947 294 -03- 0899 Hier T ypschild aufkleben! (nur f ü r Werk).
デバイスAEG 6500 Kの購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
AEG 6500 Kをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはAEG 6500 Kの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。AEG 6500 Kの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。AEG 6500 Kで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
AEG 6500 Kを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はAEG 6500 Kの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、AEG 6500 Kに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちAEG 6500 Kデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
