AEGメーカー80800の使用説明書/サービス説明書
ページ先へ移動 of 48
ÖKO_FAVORIT 80800 Dishwasher User Instructions.
2 Dear customer, Please read these user instructions carefully. Above all please observe the safety instructions on the first few pages ofthese u ser in str uct ions ! Please keep these us er i nst ruc tion s for later reference. Pass them on to any subsequent owner of th e a ppl ian ce.
Contents 3 CONTENTS Operating Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Disposal . . . . . . . .
Contents 4 Technical Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 Notes for Test Institutes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 Installation and Connection Instructions .
Operating Instructions 5 OPERATING INSTRUCTIONS 1 Safety Instructions The safety aspects of AEG electrical appliances comply with accepted technical standards and the German Appliance Safety Law.
Operating Instructions 6 General Safety • Repairs to the dishwasher are only to be carried out by qualified serv- ice engineers. Improper repairs can give rise to significant hazards for the user. If your appliance needs re pairing, please contact customer service or your dealer.
Operating Instructions 7 • Do not sit or stand on the open door, the appliance may tip over. • In the event of a fault, first close the tap, then switch off the appli- ance and unplug it from the mains. If the appliance is permanently wired to the mains: switch o ff the fuse(s) or unscrew them.
Operating Instructions 8 2 Economical and Ecological Dishwashing • Only co nnect the dishwasher to the hot water supply if your hot water is not electrically heated. • Ensure that the water soften er is correctly adjusted. • Do not pre-rinse dishes under running water.
Operating Instructions 9 Appliance Features and Control Panel Top Spray Arm Inlet for Fan Assisted Drying Container for Special Salt Rating Plate Container for Rinse Aid Filters Rubber Seal for Connec.
Operating Instructions 10 Contr ol Panel The Control Panel comprises the ON/OFF switch (AAN/UIT; MARCHE/ARRET) and the progr amme buttons with LED indicator s. Signal Tone Button: In addition to the wash programme printed on the front panel, this button can be used to set whether a signal tone is to indicate that a wash progr amme is finished.
Operating Instructions 11 Prior to using for the first time Prior to using for the first time, remo v e all the clips with which the dish racks are secured for transport. Then perform the following steps: 0 1. Adjust the water softener 2. Filling with Special Salt for the Water Softener 3.
Operating Instructions 12 0 1. The dishwasher must be switched off. 2. Press the signal tone and water so ftener buttons simultaneously and keep them pressed 3. Press the ON/OFF switch. The LED indi cators for the signal tone and water softener buttons flash.
Operating Instructions 13 3 The water expelled by filling the salt container with special salt runs out of the salt container onto the base of the washing compartment. This is not a cause for concern, th e water will be pumped out at the start of the next wash programme.
Operating Instructions 14 Filling with Rinse Aid Rinse aid ensures that your dishes gleam and are free from spots, and that you glasses are clear. 1 Use only branded rinse aid for dishwashers. Never fill the rinse aid con- tainer with any another substance (e.
Operating Instructions 15 Adjusting Rinse Aid Dosing 3 As the dishes are washed rinse aid is released from the disp enser into the wash water. The dose is factory set at 4, and can be adjusted from 1 to 6. Only change the setting if streaks, milky spots or dried on water marks are visible on glasses or crockery.
Operating Instructions 16 In Daily Use • Is it necessary to refill with special salt or rinse aid? • Load cutlery and dishes into the dishwasher • Fill with dishwasher detergent • Select a was.
Operating Instructions 17 – To avoid damage to glasses, they must not touch – Do not lay small objects (e.g. lids) in the cutlery rack Loading Cutlery 1 Long, pointed items of cutlery are a hazard if placed in the cutlery basket, particularly to children (see Safety Instructions).
Operating Instructions 18 I f you use the grid insert, it is not possible to open the cutlery basket. 1 To ensure that the cutlery basket cannot open on removal from the appliance, you should always hold both parts of the two part handle. 0 1. Place the cutlery basket on a table or work surface 2.
Operating Instructions 19 Loading Pans, Frying Pans and Large Plates Load large and heavily soiled dishes in the lower rack. 3 To ease the loading of large items at some dishwa sher-models the t wo rows of prongs for the right-hand plate insert can be folded down: 0 1.
Operating Instructions 20 Loading Cups, Glasses and Coffee Services Load small, delicate items and long pointed cutlery in the upper rack. • Arrange items of crockery on the folding cups racks so that they are offset from each other and water can reach all items.
Operating Instructions 21 Adjusting the Height of the Upper Basket 3 The height of the basket can also be adjusted when it is loaded. Depending on the model, your applia nce is provided with one of the following types of upper basket: Lowering the Upper Basket: Type 1 0 1.
Operating Instructions 22 Filling with Detergent 1 Only use dishwasher detergent. Fill with detergent: – Prior to the start of a wash programme (not for the pre wash pro- gramme).
Operating Instructions 23 Bio Wash Programmes and Co ncentrated Detergents Based on their chemical compositio n, dishwasher detergents can be split into two basic types: – Conventional, alkaline de tergents with caustic components – Weak alkaline concentrate d dete rgents with natural enzymes.
Operating Instructions 24 Selecting the Wash Progr amme (Programme Table) Choose the most suitable wash program me with the aid of this table: 1) During BIO programmes the water i s briefly heated to more than 50 °C so that the active oxygen becomes effective.
Operating Instructions 25 4) The „E-STAND; ECO“ wash programme washes normally soiled dishes with a very low elect ricity con- sumption. If the dishes need to be washed more quic kly, as an alternative y ou can use the „NORMAAL BIO; NORMAL 50 °“ was h programme.
Operating Instructions 26 Starting the Wash Programme 0 1. Check that the dishes and cutlery ar e loaded into the dishwasher in such a manner that the spray arms are free to rotate. 2. Open the tap fully. 3. Shut the door. 4. Press the ON/OFF switch (AAN/UIT ; MARCHE/ARRET) Th e ON/OFF switch indicator (AAN/UIT; MARC HE/ARRET) illuminates.
Operating Instructions 27 Interrupting the wash programme by opening the door of the d ish- washer 1 Hot steam can escape when the door is opened. There is a risk of scold- ing! Open the door carefully. 0 1. Open the door of the dishwasher. The wash pro gramme stops.
Operating Instructions 28 Setting or Changing the Start Delay Timer Using the start delay timer you can adjust when the wash programme is to begin within the next 19 hours. Setting the start delay timer: 0 1. Press the ON/OFF button (AAN/UIT; MARCHE/ARRET).
Operating Instructions 29 Switching Off the Dishwasher Only switch the dishwasher off when the multi-display indicates “0“ for the remaining programme time and END (EINDE; FIN) is illuminated on the programme progress display.
Operating Instructions 30 Cleaning the Filter 3 The filters in the base of the washing compartment are to a large extent self-cleaning. Nevertheless the filters should be checked and cleaned from time to time. Dirty filters will degrade the washing resu lt.
Operating Instructions 31 What to do, when ... Try to rectify minor faults on the dishwasher with the aid of the instructions given here. If you call in customer service to resolve one of the malfunct.
Operating Instructions 32 During a washi ng pro- gramme, the displ ay SPRAY ARM (SPROIEARM; BRAS) lights up and a longer warn- ing tone can be heard at the same time. The middle spray arm is jammed. Open the door carefully . Hot steam can esc ape when the door is opened.
Operating Instructions 33 ...there are problems with th e operation of the dish- washer. ...the wash result is not satisfactory. The dishes are still dirty. – The wrong wash programme was selected. – The dishes were arranged in such a manner that water has not reached all parts.
Operating Instructions 34 – The filter in the base of the washing compartment is dirty or incor- rectly positioned. – Detergent was not used or too little was used. – In the case of scale deposits on th e dishes: the special salt container is empty or the water softener is incorrectly adjusted.
Operating Instructions 35 Technical Data ; This appliance conforms with the following EU Directives: – 73/23/EWG dated 19. 02. 1973 – Low Voltage Directive – 89/336/EWG dated 03.
Operating Instructions 36 Notes for Test Institutes Testing in accordance with EN 60704 must be carried out with the appliance fully loaded and using the test programme (see Programme Table).
Installation and Connection Instru ctions 37 INSTALLATION AND CONNECTION INSTRUCTIONS Installing the Dishwasher • The dishwasher must be installed on a firm floor and adjusted to ensure that it is stable and level.
Installation and Connectio n Instructions 38 • If the dishwasher is installed under- neath a kitchen work surface, the original work surf ace of the dish- washer is to be removed as follows: – Unscrew the screws (1) from the elbows on the back side.
Installation and Connection Instru ctions 39 Connecting the Dishwasher Water Connection The dishwasher is fitted with safety devices that prevent the wash water returning into the drinking water system and comply with the applicable plumbing regulations.
Installation and Connectio n Instructions 40 Water drain Drain hose 1 The drain hose must not be kinked, crushed or entangled. • Connecting the drain hose : – Maximum permitted height: 1 metre. – Minimum required height 30 cm above the lo wer edge of the machine.
Installation and Connection Instru ctions 41 Leak Prevention System For protection from damage due to water leaks, the dishwasher is equipped with a leak prevention system, the AQUA CONTROL SYSTEM. In the event of a fault, the safety valve immediately interrupts the sup- ply of water to the appliance and the drain pump switches on.
Installation and Connectio n Instructions 42 Connections The water inlet and drain hoses, as well as the mains cable must be connected beside the dishwasher as there is insufficient space behind the appliance.
Adressen kl antendienst 43 ADRESSEN KLANTENDIENST Telefon Telefax Electrolux Home Prod ucts Belgium ELECTROLUX SERVICE Bergensesteenweg, 71 9 1502 Lembeek Consumer services 02/363.04.44 02/363.04.00 02/363.04.60 Province de Liège: S.D.E. Rue Gaucet, 26 4020 Liège 04/343.
Garantiebepa lingen 44 GARANTIEBEPALINGEN WAARBORGVOORWAARDEN 1. WERKING: De waarborg treedt slechts in werking indien de aankoopfakt uur kan voorgelegd worden.
Garantiebepalingen 45 8. VOOR HERSTELLINGEN zich wenden tot uw AEG verkorper of tot de door AEG Aanvaarde Herstelbedrijven. 9. Electrolux H ome Products Belgium CONSUMER SERVICES AEG Bergensesteenweg, 719-1502 Le mbeek.
46.
Service 47 SERVICE In the section "What to do, if..." the most important sources of faults that you can rectify yourself are summarised. If, nevertheless, you call in customer service to res.
AEG Hausgeräte GmbH Postfach 1036 D-90327 Nürnberg http://www.aeg.hausgeraete.de © Copyright by AEG 822 945 271 - 00 - 1101 Subject to change without notice.
デバイスAEG 80800の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
AEG 80800をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはAEG 80800の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。AEG 80800の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。AEG 80800で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
AEG 80800を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はAEG 80800の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、AEG 80800に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちAEG 80800デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。