AiwaメーカーJAX-T7の使用説明書/サービス説明書
ページ先へ移動 of 28
Mini Hi-Fi Component System JAX-T7 4-246-840-61 030327AMI-NV -FM.
2 En PRECAUTIONS CLASS 1 LASER PRODUCT LUOKAN 1 LASER LAITE KLASS 1 LASER APP ARA T On operating voltage Before operating the system, check that the operating voltage of your system is identical with the voltage of your local power supply .
3 En T ABLE OF CONTENTS PRECAUTIONS .................................... 2 PREP ARA TIONS ................................... 4 PA R TS AND CONTROLS ......................... 5 ADJUSTMENTS BEFORE OPERA TIONS ...... 10 CD OPERA TIONS ..................
4 En Connection Plug in the AC power cord to the AC power outlet after all other connections are made. 1 Connect the front speakers. Connect the right front speaker (marked with “R”) to the SPEAKERS R terminals and place it on the right side of the unit.
5 En Main unit: rear Refer to the pages indicated in parentheses for details. 1 AM LOOP , FM 75 Ω terminals (4) Plug in the supplied AM and FM antennas here. 2 MD (VIDEO) jacks Accepts analogue sound signals from external equipment. Connect using an optional connecting cable with RCA phono plugs (red plug to R jack, white plug to L jack).
6 En 1 DISC CHANGE/DISC SKIP (12) Rotates the CD trays. 2 POWER 6 ST ANDBY/ON (10) Switches the unit on and off (standby). The red indicator flashes when receiving a signal from the remote. 3 T APE A/B (18) Selects T ape function, and deck A or B. TUNER BAND (17) Selects T uner function and the radio band.
7 En # BASS (20) Adjusts low frequency sound. SURROUND (21) Switches surround on and off. i-Bass (20) Produces rich and clear low frequency sound. $ DISPLA Y (1 1, 12, 15) Displays the time and the remaining time for CD. When the unit is off, press DISPLA Y to switch between DEMO, Clock and ECO display modes.
8 En Buttons with the same or similar names with the main unit basically have the same function. 1 POWER (10) 2 1-0/10, +10 (12, 14, 15) Selects a CD track of the specified number . The numbered buttons take on these functions below when pressed together with SHIFT held down : EDIT (19) Enters Automatic CD dubbing mode when pressed in stop mode.
9 En 9 FUNCTION Switches the active function among CD, T APE, TUNER and MD (VIDEO). 0 DISC SKIP (12, 14) Select a disc. ! c / d (12–14) CD and T ape: starts playback. s CD and T ape: stops playback. f , g (12, 17, 18) CD: searches a track in fast forward or fast reverse playback when held down.
10 En ADJUSTMENTS BEFORE OPERA TIONS Power Tu r ning the unit on Press POWER 6 ST ANDBY/ON (POWER on the remote). Pressing T APE A/B, TUNER/BAND, MD (VIDEO) or CD also turns the unit on (Direct Play Function.) Tu r ning the unit off Press POWER 6 ST ANDBY/ON again.
11 En Dimmer Adjusts the brightness of the display . 1 Press MODE repeatedly until “ DIMMER ” appears in the display when the unit is turned on and then press ENTER. 2 Tu rn MUL TI JOG to select one of the four dimmer modes “ DIMMER 0 ” to “ DIMMER 3 ” and then press ENTER.
12 En This unit plays back finalized CD-R/RW discs as well as audio CDs. Playback 1 Press CD and load disc(s). Press z OPEN/CLOSE to open the disc compartment and place one or two disc(s) with the labelled side up. To place three discs, press DISC CHANGE/DISC SKIP so that the trays rotate, then place the third one.
13 En Repeat playback Plays all the tracks or one track on the discs repeatedly . 1 Press MODE repeatedly until “ REPEAT ” appears in the display and then press ENTER. 2 Tu rn MUL TI JOG to select one of the two repeat modes as below or “ REP OFF ”, and then press ENTER.
14 En Programmed playback Yo u can program the unit to playback selected tracks from one or more discs in any order you specify . 1 In the stop mode, press MODE repeatedly until “ PLAYMODE ” appears in the display and then press ENTER. 2 Tu rn MUL TI JOG to select “ PROGRAM ” and then press ENTER.
15 En Playback This unit plays back MP3-CDs: discs recorded with MP3 tracks (files). Basic operations for MP3-CDs are mostly the same as those in “CD OPERA TIONS”. This section explains MP3-CD OPERA TIONS where there is additional information or exceptions to the information in “CD OPERA TIONS”.
16 En Notes on display indications during play • Up to 32 characters are displayed for the title of an album or a track. If ID3T AG version 1.X was applied to record additional information for an MP3 track, up to 30 characters showing track title is displayed.
17 En TUNER OPERA TIONS Manual tuning 1 Press TUNER BAND (SHIFT+BAND on the remote) repeatedly to select a band (FM or AM.) 2 Press f or g to tune in to a station. “ TUNED ” appears when a station is tuned in. To search for a station automatically (Auto Search) Hold down f or g .
18 En T APE OPERA TIONS T APE A/B CD SYNC T APE A/B MUL TI JOG ENTER MODE Deck B PUSH EJECT/CLOSE Deck A REC P A USE/ ST ART PUSH EJECT/CLOSE EDIT SHIFT PLA Y MODE DISC DIRECT PLA Y 1-3 DISC CHANGE/ DISC SKIP DISC SKIP Playback Use only TYPE I (normal) tapes.
19 En Basic recording Use only type I (normal) tapes. Deck B is the recording deck. 1 Insert the recordable tape in deck B. Press z PUSH EJECT/CLOSE to open the outer cassette holder , and insert with the exposed side down and the side to be recorded on facing out from the unit.
20 En SOUND ADJUSTMENTS SOUND SURROUND TREBLE/ MIDDLE HEA VY , V OCAL, SALSA, TECHNO , HIP HOP , MANU AL SURROUND MUL TI JOG i-Bass BASS ENTER MODE GEQ SHIFT TREBLE and MIDDLE TREBLE enhances high frequency for sound clarity and MIDDLE enhances mid frequency for presence.
21 En Graphic equalizer Selects a sound equalization curve to match the music type. Press HEA VY , VOCAL, SALSA, TECHNO, HIP HOP or MANUAL. On the remote, press SHIFT+GEQ and then press r or t repeatedly within 2 seconds. The selected equalization curve is displayed.
22 En TIMER OPERA TIONS Sleep timer Tu rn s off the unit automatically after a specified time. Press SLEEP on the remote repeatedly . With each press, the timer duration changes cyclically as follows: “ AUTO ” * “ 90 ” “ 80 ” - - - “ 10 ” “ OFF ” The unit turns off after the selected time.
23 En Choosing a Timer function Y ou cannot use both Timer playback and T imer recording at the same time. If both have been set, choose one or the other . 1 Press CLOCK/TIMER/SELECT on the remote. “ SELECT ” is displayed. 2P ress r or t to select “ DAIL Y ” (Timer playback) or “ REC ” (Timer recording) and press ENTER.
24 En Care and maintenance Occasional care and maintenance of the unit and the software are needed to optimise the performance of your unit. To clean the cabinet Use a soft and dry cloth. If the unit surfaces are extremely dirty , use a soft cloth lightly moistened with mild detergent solution.
25 En Resetting the unit If an unusual condition occurs in the display window or the cassette deck, reset the unit as follows: 1P ress POWER to turn off the power . If the power cannot be turned off, disconnect the AC power cord, then plug it in again.
26 En Specifications MAIN UNIT CX-JT7 TUNER FM tuning range 65 MHz to 74 MHz (10 kHz step) 87.5 MHz to 108 MHz (50 kHz step) FM usable sensitivity (IHF) 15.
.
Printed in China Sony Corporation http://www .aiwa.com/.
デバイスAiwa JAX-T7の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Aiwa JAX-T7をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはAiwa JAX-T7の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Aiwa JAX-T7の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Aiwa JAX-T7で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Aiwa JAX-T7を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はAiwa JAX-T7の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Aiwa JAX-T7に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちAiwa JAX-T7デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
