LevelOneメーカーFCS-3102の使用説明書/サービス説明書
ページ先へ移動 of 121
FCS-9364 OneSecure V ideo Management Software, 64-Channel Amdinstrator Manual For V ersion 3.0. 09 2013/12/ 20.
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 2 About This Manua l T arget Audience This manual is intended for S ystem Administrators who are responsible for installing and setting up the OneSecur e s urveillance s ystem.
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 3 Conventions Use d in This Manual The following are t ypographic conven tions used in this m anual: Bold : Bold typefac e is used f or a k eyword, m ajor f unctions of NVR, or a title of a section/colum n.
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 4 Table of Contents 1 About This Manual 2 T arget Audience..............................................................................................2 Content Overvi ew ............
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 5 Access NVR Server via Internet Explor er .................................................23 From Server Computer Using Local Client ................................... 23 From Remote Client Computer .
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 6 Add Non-LevelOne Cameras ....................................................... 42 Manage Multiple Devices ..........................................................................
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 7 How to Setup FTP Sett ings for Event Rules ................................ 78 System Log ............................................................................................
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 8 Un -install Server Software ......................................................
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 9 Overview OneSecure is a W indows-b ased s oftware that prov ides distributed net work video surveillance solution with full f unctionality .
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 10 System Installation Ch eck List Pre-installation Item T ask Description Reference 1 Prepare software license OneSecure comes with 64 -channel free license.
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 11 Settings on pag e 46 12 Configure Record ing Schedule By default , each device will start 7/24 schedule re cording as soon as it i s added . Set recording sched ule for each d evice.
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 12 Getting Started System Requirements The M inimum CPU Processor s pec will prov ide acceptable performance for s ystems that use mostly MPEG4 streams. Surveillance systems that use 4 or more H.
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 13 computer ’ s m ulti -tasking capability b y adding more RAM, you will need a 64 -bit ve rsion of W indows to take advantage of it all. Please visit the link below for more m emory limitations on various W indows platform s.
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 14 Pr erequisites These prerequisites b elow are necessar y before installation: 1. Suitable System Specifications Ensure that the server computer meets the minimum system requirements, and that the server computer has C Driv e .
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 15 3. Move the s lider to “ Never notify position ”, and then cli ck “ OK ”.
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 16 Server Installation The server program installation is as eas y as 1-2- 3 b y following t he installati on wizard’s instructions. The server would start its service right af ter installation com pletes, without t he need to restart the server c om puter .
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 17 3. T he IP Port Checker will pop up to conf irm the NVR port num ber with you. The installation program will use 80 as default. Y ou m ay enter another a vailable port number in “ Listen Port ” field and c lick “ Apply ”.
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 18 5. After the insta llation com pletes, co nnect to http://local host:port number with In ternet Explorer browser , you will see NVR L ogin page.
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 19 W orkstation Installation NVR Workstation includes a set of pro gram s that pro vide interface between use rs and the NVR server . It m ay be installed on the sam e PC as the NVR server , or the y ma y be i nstalled separatel y and connect to NVR Serv er via network .
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 20 License and Activation In OneSecure s ystem, y our requir ed number of channels should be licensed and activate d before connecting th e devices.
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 21 Y ou can activate the licens es on your NVR through O ffline Activation . Offline activation does not require Internet ac cess for NVR server. It is used w hen NVR is located in network not connected to public Intern et (e.
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 22 V erify Y our License Once your license is s uccessfully activated, th e license inform ation will be sho wn on License page. Important Notice The license data will be erased once OneSecure s erver is uninstalled.
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 23 Log In to the Sy stem Access NVR Server via Internet Ex plorer From Server Computer Using Local Client Open Internet Explorer . If your com puter is where OneSecure is ins talled, t ype http://localhost/ or th e com puter ’s ip address in URL box .
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 24 Login Failure T roubleshooting Once you confront with problem s accessing NV R server , refer to the possible conditions below and follow the instruct ion to solve your issues.
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 25 3. Press down “ ctrl ”+ “ alt ” + “ Delete ” keys to bring up Window s T ask Manager . Select “ View” , and then “ Select c olumns ”, and enable the “ PID (Process Id entifier) ” t o appear on search results.
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 26 Cause 1 : Y our Inte rnet Explorer browser version does not sup port OneSecur e. Solution : Make s ure your browser is 32 -bit vers ion. Cause 2 : Y our bro wser restricts the installat ion of add -on com ponents.
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 27 Login A. Enter A ccount & Passw ord Account (non cas e-sensitive) : Admin (default) Password ( case-sensitive) : 123456 (default) B. Change UI languag e T o change UI language, select the des ired language from “ Langu age ” dropdown list.
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 28 Access NVR Server via OneSecure W orkstation OneSecure W orkstation includes a set of program s that provide interf ace between users and the NVR server .
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 29 E. Remember Login Inf ormation T o have OneSecure Workstation rem ember the Account , Password, your choices of Initial Page a nd UI L angua ge , sim ply check “ Remember login info ” .
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 30 5. Y ou can export the saved server s ites, or import it to a nother Workstation client com puter . Access NVR server v ia Onew Secure Workstation , go to Setup page System tab Workstation .
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 31 Set up the System This chapter will guide y ou throu gh e verything you need to kno w in S ystem Setup proc edure from first time connec tion with On eSecure server to general s y stem configuration.
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 32 System Settings Y ou can adjust the E-mail & SMTP settings, FTP settings for ev ent rules now or later . For more details a bout the s ettings, please r efer to How to Setup SMTP Settin gs f or Event Rules on page 77 and How to Setup F TP Settings for Event Rules on page 78 .
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 33 Licensing This is the license m anagem ent section. On lower right part of th e screen shows num ber of channels allowed un der your current licens e. Each NVR server h as a license f or 64 channels that is alread y activated.
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 34 NVR Main Screen Y ou will enter the l ive vie w s creen after Setu p Wizar d . On the right are link butt ons to three NVR m ajor functions: (1) Live view , (2) Playback and (3) Setup .
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 35 Add Devices Cameras or video encoders are the f undamental building blocks of surveillance sy stem s. T o manage cam eras from OneSecure , you h ave to ad d camera devices into On eSecure s ystem first.
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 36 3. T here are three ways to add de vices into the system, Search Devices , Search ONVIF Devices , and Add Device M anually . - Use Search D evices to aut o search LevelOne cameras located in the same subnet as your NVR serv er .
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 37 2. Select the row of the cam era you wish to add to th e s ystem and r epeat this step until y ou have check ed all the devi ces you need . Pleas e note that t he list of devices is shown regardless of the acc ount nam e and password.
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 38 A dd De vices on W AN or Other Local A rea Networks 1. After selecting “ Add Devic e Manually ” , the camera settings page will appear as below .
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 39 2. Click “ G et Dev ice Setting s ” to h ave NV R c ontact the device a nd get t he live view . Once connected to the device, NVR will get all the device properties suc h like Brand , Model , Device Serial Number , Firmw are V ersion .
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 40 IP address Enter the camera’s IP address or host nam e. Brand Select the m anufacturer of device. Model Select the device m odel of the IP cam eras / video servers. In most cases, this is autom atically f illed in after you c lick Get Device Setting .
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 41 Status Icon Description Icon Status Description NVR server cannot retr ieve video stream ing. T his ma y be th at a vid eo server is not connected with cam eras, or that the stre aming is blocked b y the firewall between the de vice a nd N VR server .
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 42 A dd Non-Le velOne Cameras In this section, we will guide you through h ow to add devices to O neSecure s ystem.
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 43 If the device you wish to a dd supports ONVIF , you ca n sel ect “ONVIF” f or M edia T ype , and the settings page will appear as below .
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 44 Manage Multiple Devices After adding several d evices to the s ystem, you m ay g et an o verview of all devi ce s on Setup page Dev ice t ab; th is is where you m ay use certai n fas t and conve nient approaches to manage a number of devices.
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 45 Copy Settings A cross Devices W hen setting a larg e number of devices, many settings wi ll resemble other ones, and it is sometimes tiresome to repeat ever y setting again and again.
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 46 A dd Video Streams from a Multi-channel Device There are devices that output m ore than one vid eo streams to NVR.
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 47 Configure Device Settings After adding a de vice to NVR, you ma y continue to configure its video, motion detecti on, PTZ or preset tour settin gs on S etup page Dev ices tab.
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 48 you have selected “ Unlimit ed ” for Maximum Bitrate . The actual value will fluctuate slightl y based on scene changes . * 1 Available when NVR is connected to a multi-s treaming device.
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 49 Event Recording w ith Frame Rate A djustment Keeps recordin g all the way withou t losing a ny single m oment; lower fram e rate can be s et for non -event record ing, which consum es only a little stor age.
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 50 Scenario B : Suppose y ou wish the system to record 24 /7, the non -event record ing to be kept at very low frame rate.
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 51 V ideo A djustment Attributes Field Categor y Field Name Description Image V ideo Flipping / V ideo M irroring Check this box to flip the video vertically and horizontally to achieve a 180 -degree rotation effect.
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 52 White Balance Select between “ Auto ” or “ M anual ” W hite Balance mode.
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 53 Configure Motion Settings T o make use of the m otion and PIR detection functions supported by y our devices, you n eed to configure the detection regions an d settings.
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 54 4. W hen the setting is finished, click “ Apply ” to save, then “ Close ” to exit this page.
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 55 Configure PTZ Device PTZ devices can do panning, t ilting and zooming automatically or through manipulation.
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 56 Parity Parity is the data v alidation m echanism f or analog devices that use serial port interface to s end or receive data.
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 57 There are two kinds of PTZ navigation: Optical PTZ Navigat ion 1. Get the live view f rom Liv e Preview window: Make sure the “ .
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 58 3. Use panel contro ls to operate PTZ m ovements: Click a button on the p anel to start, the re d crosshair will appear in the view . Digital PTZ Navigation Digital PTZ allows you to zoom into part of the video and enlarg e it t o displa y on scr een.
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 59 Set PTZ Preset Points W ith PTZ devices, y ou m ay def ine a view by where t o look (through p anning an d tilting) and how close (t hrough zooming) to zoom.
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 60 Set PTZ Command If your speed dom e or P TZ device has a special function not support ed in the standard protocol, you may input it in PTZ Command list and execute it. Ex: Activate the wiper to clean the window of the PT Z.
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 61 4. After a tour is s aved, it is availabl e on Liv e View page PTZ control panel. Configure Fisheye Cameras W ith hem ispherical lenses , fisheye c ameras generate images at up to 360 -de gree width, which can cover all four corner s of a r oom or both sides of a long ais le.
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 62 Full support for al l types of dewarped vide o stream output f rom fishe y e cam eras with in -cam era dewarping capabilit y .
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 63 Fisheye M ode Description PTZ Navigation Original View The very raw fishe ye view Digital PTZ Dewarping One large user -defined cr.
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 64 Quad Four sm all user-defined cropped reg ions ePTZ 3. After the configuration is done, rem ember to click “ Apply ” to save the settin gs.
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 65 Schedule Recording s Unlike the traditio nal analog surve illance s ystem, the I P surveillance s ystem provides a target-oriented recording schedule for devices; the view of each device can be recorded based on your required tim e segments and event t ypes.
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 66 Post-event Recording Buffer (sec): This will determine how long after the event is trigg ered should be included in t he event r ecording f ile. Available ch oices are 10 , 30 , 60 , 120 , 180 , an d 300 seconds .
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 67 Set the Schedule Here y ou can configure camera ’ s recording schedule on 7 days / 24 hours ba sis.
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 68 Use Time Setting Quick Buttons to Set the Time in One Click Select the recordi ng m ode, then click one of these buttons to apply the m ostly - used tim e settings. Click to apply sc hedule for all day .
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 69 Click to clear all schedule sett ing in this devic e . Lock Specific Days Clicking the da y of the week will lock/unlock that da y from schedule setting. You can shield schedule on a certain da y from being changed by chan ges in other weekda y s.
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 70 Copy an Existing Schedule to Others W ith plenty of devices in your system, it happens that you want t o appl y the same schedule to multiple devices. After creating a schedule f or one device , you can copy it to other cam eras .
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 71 Vie w the Entire Recording Schedule On Setup page Schedul e tab, c lick A ll D evices on Device List , an overview of all device schedules will be listed o n the right.
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 72 Event Manage ment W hen som ething happens on c amera site, such as someone walks b y , the door opens or closes, a fire break s out or the sun g oes do wn – these are all Events .
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 73 How to Edit an Event Rule 1. Go to S etup page Ev ent tab. All the editable event rules are listed in t he d evice ID order . 2. Select a de vice from the D evice List on t he left.
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 74 Y ou can enable m ultiple responses b y first checking the box(es) to enable the item s: Action Items Function Description This kind of action will focus your attention on the channel when triggered.
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 75 4. After conf iguring the actions, click “ Apply ” to save this response. 5. Go to Setup page Schedule tab and set the Event Hand ling sc hedule for t his de vice.
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 76 6. T o check i f this r ule i s successfully set, please mak e sure y ou have properly configured the involved (1) trigging side s.
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 77 Delete the Event Rule s On Event List , sel ect the rules you wish to delete, an d then click “ Delete ” to clear this rule. How to Setup SMTP Settings for Event Rules OneSecure supports e-m ail notification for Event Handling sent through an SMTP serv er.
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 78 Field Name Description Server Input the sender ’s SMT P s erver address . Onl y alphabets, numbers , and the symbols (.) , (_) , ( -) are valid. SMTP Port Set the SMTP port, allowed value is from 1~ 65535 , default is 25 .
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 79 2. Fill in each of the following fields. Field Name Description Server Input the F TP s erver address. Onl y al phabets, numbers , and t he symbols (.) , (_) , (-) are valid Port Set the FTP port, allowed value is f rom 1~65535, def ault is 21 .
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 80 System Log The activities perform ed by logged - in Us ers are recorded on server as System Log . W ith the access permission, a user may view , search and export this record for analysis or investigation.
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 81 Choose Log T y pe Y ou m ay filter t he lo gs b y T ype , Use r Account , and D evice by s electing fr om dropdown list, t hen click “ Search ”. By default, a ll types are selected.
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 82 The following user be haviors are recorded in NVR server: T ype Description User Operation Login, Logout, Ma nual Record,Trigger D.
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 83 Storage Manag ement This s ection describes how to manage stor age spac e in NVR. Please note that this sec tion only deals with the o verall storage rules, and not storage of individual channels.
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 84 2. After selecting the disk drive, please set the deletion rule. There are two ways to delete recordings, w hen both are active, N.
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 85 Manage User Gr oups/ Users The Us er Groups/Users page allows you to (1) m anage the access perm issions of different user groups, (2) add users to or delete them from user groups, (3) and assign users to specific user group.
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 86 domain network. As OneSec ure runs on a server computer logged on to the sam e do main with Active Director y serve r , you can import a user accou nt or a group from those concurrently existing in Act ive Director y into NVR ser ver .
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 87 The domain users within that group will all be added t o NVR ser ver at the sam e time. T o view the whole users within t his group, please select and enable the “ Show users in do main groups.
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 88 Y ou m ay copy the Device Permissions Settings to other devices. Click “ Co py ” un der Device Permissions tab to bring up the target device m enu, check the target devices, and click “ Apply ”.
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 89 Note Account /Passw ord Rules 1. Account and Passw ord fields allow alp habets , n umbers, and s ymbols except th e following: / [ ] : ; | = , + * ? < > " 2. In Account field, for alphab ets, the input will be reco gnized as lowerc ase letters.
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 90 Domain: company .com Domain Users Management As NVR ser ver com puter is logged on t o a dom ain Acti ve Director y , it c an im port a user account from Active Director y . This type of User account is “ Domain User ”.
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 91 Customize V iews After all devices are conf igured, you may start customizing the v iews for different users and purposes. This chapter will teach you how to add video s ource, arrange the chann els and manage live view la youts.
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 92 Step 1: Create a New V iew On V iew T ool Bar , c lick the Create View button , input the V iew Name , add a New Group for this View and decide w hether this grou p is to be Public or Priv ate , and then c lick “ Apply ”.
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 93 Step 4: A dd Video Source In edit mode, m ove the mouse o ver the channel and click . Y ou m ay also directl y pull a camera from the Device panel to your desired channel. Remove the camer a view : right- click on th e channel and select “ Remove ”.
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 94 Map brigh tness : T o change the map brightness , right-click on the map, select “ Map Mask ” and t he brightness perc entage level. Map size : By default, the m ap will be displayed in its original si ze.
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 95 Manage maps : All the uploaded images are managed under Map Image M anager . On Live V iew screen, you may go to M ap Image Manager to view , up load or delete the m aps. Step 6: A dd Devices to the Map Pull a device from Device List to th e map.
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 96 Step 7: A djust the Channel Size & Layout Adjust the chann el size : Click on right lower corne r of the channel window , drag a nd then release.
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 97 Step 10: Set Default Hotspot Channel (Optional) By system def ault, the global hotspot c hannel will alwa ys be the top left one. Y ou can set any other channel on your live view screen to be t he default hotspot chan nel.
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 98 T o reset the ePT Z navigation area back to default viewing an gle, right -click to bring up channel menu, and t hen click “ Reset ”. 3. click on View T ool Bar to save the co nfiguration.
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 99 Set View Link By creating a link button on a m ap view , you can directly be link ed to another spec ific view b y clicking the button. O n the picture be low shows how to create a link button to 7F View on 1 1F View .
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 100 O n View T oolbar , click then select C reate Patrol . 1. Input the Patrol N ame 2. Select the P atrol T ype to b e either available for a ll Users or to th e creator ’s account onl y .
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 101 T ips to Enhance Live Vie w Performance Live view for m ultiple channels requires sufficient computing po wer to run the perform ance. In certain extreme cases, lik e w hen v iewing several m egapixel H.
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 102 Setting . Let Windows A utomatically Start with NVR Liv e View Y ou m ay have the client ap plication autom atically run and open th e live view after Windows starts. In this wa y , you may save steps and tim e before you eventu ally see the des ired live view screen.
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 103 Customize Syste m Language NVR server supports m ultiple languages f or user interface displa y . T here are alread y 10 translated la nguage f iles in the ser ver system. Each l anguage is op en to custom ization based on your ow n needs.
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 104 Edit User Interface W ordings Each language file conta ins four editable string ta bles. Each table displ ays the d efault wordings in English and the translation in targ et language.
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 105 Export / Import Language String File Y ou m ay also click “ Export ” to ex port the language file as .xm l form at to edit in Notepad , or “ Import ” to im port a language file to use in the system .
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 106 Display Configur ations Y ou can chan ge the user interf ace s tyle b y arr anging the main screen an d Panel / Device List on the right or l eft. Go to Setup page System tab Settings , in User Interface Style section, select the setting st yle then click “ A pply ”.
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 107 V ideo & Snapsho t Export Configu rations The snapshots taken by Users on Live V iew and all exported video files are saved to a default file location, and you may configure the desti nation on NVR ser ver .
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 108 Joystick On OneS ecure, ot her tha n user interf ace PT Z panel an d m ous e operat ion, you m ay also control the PT Z m ovem ents by physical contr ollers.
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 109 Un - ins tall Server Software In certai n c ases, un-installation of NVR system is necessar y , for example, (1) you want t o ter.
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 1 10 Step 2: Remove OneSecure Server Program Folder (Optional) If y ou are performing a com plete un-inst allation without leaving any NVR server r elated data on the current com puter , you ma y consider deleti ng this folder .
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 111 Back Up System Da ta Making regular s ystem backups is alwa y s recomm ended in cas e of unexpected disasters or accidents that may damage NVR server .
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 1 12 Step 2: Back up Recording Files Folder (Optional) Back up th e whole Record ings f older(s) that sa ves the recorded video files on storage hard drive(s).
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 1 13 Restore System Data Before starting restor ing the system , make sure you have done t he following: (1) Re -activate the l icense . If you have d one un- installation previousl y , a nd the num ber of channels to b e r ecovered is over 16 .
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 1 14 System Migration NVR server s ystem m igration is necess ary when you need to replace your cu rrent server computer .
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 1 15 Advanced Administrative T asks T o assist the NVR administrator in monito ring the server status and basic trouble- shooting, the OneSecure A dministrato r T o ol is installed along with NVR server pro gram on the server computer .
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 1 16 Change A uthentication Method Y ou m ay enable the Dige st auth entication other tha n the basic wa y . W ith this method, User ’ s credentials are encr ypted using MD5 algorithm .
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 1 17 Set an NVR Server as a Redundancy Server You can assign an NVR server as a redundanc y server for other NVR server.
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 1 18 License Registration W ith a successful purchase, you will receive a license k ey for registration 1. Enter Administrative T ool interface y clicking the icon on W indows task bar .
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 11 9 After the registration, th e license inform ation will appear on this pa ge..
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 120 Set up Redundancy Server 1. Go to th e “ Storage ” page to set up the storag e space conf iguration 2. Go to “ Target ” page to edit the list of the target NVR servers. Click “ A dd ” and fill in the connection properties of the NVR server and click “ Apply ”.
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 121 3. After you click “ Yes ” to conf irm ths configuration, this NVR will immediate turn into an redundanc y server on a first -come-f irst-serve basis. By entering “ Serv ice ” page, you can observe the servi ce status .
デバイスLevelOne FCS-3102の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
LevelOne FCS-3102をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはLevelOne FCS-3102の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。LevelOne FCS-3102の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。LevelOne FCS-3102で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
LevelOne FCS-3102を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はLevelOne FCS-3102の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、LevelOne FCS-3102に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちLevelOne FCS-3102デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。