Castelleメーカー61-1273-001の使用説明書/サービス説明書
ページ先へ移動 of 62
Fa x P r e s s ™ T he Integr ated Network Fax Server F axPress Xero x Interface Guide.
IMPOR T ANT NOTICE ©2003, Castelle ® . All Rights Reserved. Pa rt No. 61-1273-001 Rev . B. This material is prot ecte d by international copyright laws . Reproduction in any form is prohibited without permission. Castelle is a U.S. Regis tered T rademark of Castelle .
iii Content s Introducing the FaxPress Xerox Interface 1-1 Overview____________________ _______________ __ 1-2 About the FaxPress Xe rox Interface ____________ __ 1- 3 Scanning Documents for Ou tgoing.
iv Index ________________ ____________ IX-1.
Introducing the FaxPress Xerox Interface 1 What’ s In This Chapter Overview _________ ______________ _______________ __ 1-2 About the FaxPress Xerox Interface _________________ 1-3 Scanning Document.
FaxPre ss Xerox Interface Guide 1—2 Overview This chapter describes: • The features and functions of the FaxPress Xerox Interface. • How users can scan documents and send them as faxes over the local area network, via the FaxPress server . • How users can set up the Xerox machine to print out incoming faxes and fax notices.
Introducing the FaxPress Xerox Interface 1—3 About the FaxPress Xerox Interface Castelle's FaxPress™ Xerox Interf ace provides a means for users of certain models of Xerox printer-scanners to.
FaxPre ss Xerox Interface Guide 1—4 System Requirement s The FaxPress Xerox Interface is designed to run on a Local Area Network with th e equipment shown in the Figure below . In order for the FaxPress Xerox In terface to function properly , the following system requirement s must be met.
Introducing the FaxPress Xerox Interface 1—5 • The Xerox W orkCentre Pro or Docum ent Centre must be a model that supports the Xerox Server Fax Kit. • The FaxPress server must be c onfigured in compliance with the requirements of your local telephone service provider .
FaxPre ss Xerox Interface Guide 1—6 3. Configure the Server Fax Kit on each Xerox W orkCentre Pro. 4. Install and Configure the n ecessary Xerox print drivers. 5. Install the FaxPress Client software on the workstation that you intend to use for this FaxPress Xerox Interface, and create a Fax- Press user for each W orkCentre Pro.
Creating Fax Repository 2 What’ s In This Chapter Overview _________ ______________ _______________ __ 2-2 Creating the Fax Repos itory Folder _ _____________ ____ 2-3.
FaxPre ss Xerox Interface Guide 2—2 Overview This chapter describes: • How to create a Fax Repository folder on a workstation that will be your FaxPress Xerox In terface host machine.
Creating Fax Repository 2—3 Creating the Fax Repository Folder T ake the following steps to create the folder where all fax files that have been scanned on each Xerox W orkCentre Pro will be stored until they are sent out by the FaxPress server . 1.
FaxPre ss Xerox Interface Guide 2—4 3. Right-click on a blank space in the window displaying the con- tents of your chosen h ard drive, and select New>Folder , as shown below .
Creating Fax Repository 2—5 6. Click the Sharing tab. 7. Click the radio button for Share this folder , and enter a unique, meaningful Share name, such as XeroxDrop1 . See the figure above. 8. Click OK to confirm these settings for the XeroxDrop1 folder .
FaxPre ss Xerox Interface Guide 2—6.
Configuring Server Fax Kit 3 What’ s In This Chapter Overview _________ ______________ _______________ __ 3-2 Setting up the Server Fax Kit on Your Xer ox System.
FaxPre ss Xerox Interface Guide 3—2 Overview This chapter describes: • How to set u p the Server Fax Kit on your Xerox W orkCentre or Document Centre system.
Configuring Server Fax Kit 3—3 Setting up the Server Fax Kit on Y our Xerox System. After you have set up the X erox W orkCentre o r Document Centre system on your local network, assign the unit a static IP address.
FaxPre ss Xerox Interface Guide 3—4 3. Click on the Properties tab, th en expand the Properties tree to reveal the Services and Fax folders, as in the figure below .
Configuring Server Fax Kit 3—5 4. Select the Fax Repository Setup i tem, as shown. A setup win - dow will appear , as shown below . 5. From the Protocol pull-down menu, select SMB . this is t he W in- dows share option. Ther e are also options fo r TCPIP (FTP), and Netware.
FaxPre ss Xerox Interface Guide 3—6 10. Cli ck Apply . A login dialog box appears. 1 1. The User Name and Password of the account required for the Xerox system are entered in the appropriate text fields. By default, the User Name is admin and the password is 1111 .
Xerox Print Driver Setup 4 What’ s In This Chapter Overview _________ ______________ _______________ __ 4-2 Installing Xerox Print Dr ivers _____________________ __ 4-3 Configuring the Xerox Print D.
FaxPre ss Xerox Interface Guide 4—2 Overview This chapter describes: • How to install p rinter drivers for printing on your Xerox system from the Faxpress Xerox Interface workstation and Faxpress user workstations. • How to configure the Xerox printer driver on th e FaxPress Xerox Interface workstation and Fa xpress user workstations.
Xerox Print Driver Setup 4—3 Inst alling Xerox Print Drivers Use the following procedure to instal l the pr inter drivers fo r printing on your Xerox system o n the FaxPress Xe rox Inte rface workstation, and the workstations of all users who wish to print faxes, fax no tifications, or other documents o n the Xerox system.
FaxPre ss Xerox Interface Guide 4—4 3. A set of installation options appears. 4. Click the Print & Fax Drivers option, as shown..
Xerox Print Driver Setup 4—5 5. A set of Print and Fax optio ns appear . 6. Click Install Y our Windows Print Driver ..
FaxPre ss Xerox Interface Guide 4—6 7. The Printer Installation Utility screen appears. 8. Click on the appropriate language option..
Xerox Print Driver Setup 4—7 9. The Configuration tab appears. 10. Sel ect your Xerox system from Sele ct Printer pull-down menu. 1 1. Select the print driver for this printer from the Choose Driver pull-down me nu.
FaxPre ss Xerox Interface Guide 4—8 12. Click the Connection button. The Connection dialog box opens. 13. Enter the IP address of the Xerox system, then click OK.
Xerox Print Driver Setup 4—9 14. The Configu ration tab reappears. 15. Check th e checkbox to the left of your printer in the list box, as shown. 16. Cli ck the Install button to install the driver . T o configu re the installed driver , continue with the next section of this chapter .
FaxPre ss Xerox Interface Guide 4—10 Configuring the Xerox Print Driver T ake the fo llowing steps to configure the Xerox Print driver once you have installed it on the FaxPress Xero x Interface workstation or a user ’ s workstation.
Xerox Print Driver Setup 4—1 1 2. The Printers window opens, displaying all available printers. 3. Right-click on the Xerox system icon and select Properties .
FaxPre ss Xerox Interface Guide 4—12 4. The Properties screen for the Xe rox system appears. Click the Printing Preferences button to open the Preferences screen.
Xerox Print Driver Setup 4—13 Setting up Paper Colo rs on the Xerox System If you wish to use more than one paper color when printing with the FaxPress Xerox Interface - for example, one color for fax print-outs, and another color for fax notices - take the followi ng steps.
FaxPre ss Xerox Interface Guide 4—14 6. The Printing Preferences screen opens. 7. Set the paper color for the driver as shown. Click OK in the Pref- erences screen, and OK in the Driver Pr operties screen.
Xerox Print Driver Setup 4—15 have installed the FaxPress Xerox Interface software. See Chap- ter 5 "Installing the FaxPress Xerox Interface" for details. 10. In the User to Email address Mapping dialog box you can set up each printer setting for Print Incomin g fax and Print outgoing fax notification with a dif ferent print driver .
FaxPre ss Xerox Interface Guide 4—16.
Inst alling the FaxPress Xerox Interface 5 What’ s In This Chapter Overview _________ ______________ _______________ __ 5-2 Installing the F axPress Client Software _______________ 5-3 Creating FaxP.
FaxPre ss Xerox Interface Guide 5—2 Overview This chapter describes: • How to install the Client software o n the W indows workstation you intend to use for the FaxPress Xerox Interface.
Installing the FaxPress Xerox Interface 5—3 Inst alling the FaxPress Client Software The procedures in th is section assume th at you have met the requirements listed in System Require ment s on p age 1-4 .
FaxPre ss Xerox Interface Guide 5—4 Inst alling the FaxPress Xerox Interface Software The procedures in this section assume that you have met the requirements listed in System Re quirements on page .
Installing the FaxPress Xerox Interface 5—5 5. Double-click the Setup.exe file. The welcome screen for the InstallShield W izard appears, as shown below .
FaxPre ss Xerox Interface Guide 5—6 7. The Destination Location screen appears. The Exchange Connec- tor will be install ed by default to C:Program FilesCastelleFax - PressXerox Inte rface directory . 8. Click Browse to change this location or Next> to accept the default location and continue.
Installing the FaxPress Xerox Interface 5—7 9. The User Information screen appears. 10. Enter t he User Name and Password for a FaxPress user with Supervisor privileges who is also an authenticated user with Administrator privileges on the FaxPress Xerox Interface work- station.
FaxPre ss Xerox Interface Guide 5—8 12. The InstallShield installs the so ftware, then the Complet e screen appears. 13. Cli ck Finish . 14. T he FaxPress Xerox Interface Conf iguration screen appears. Con- tinue with your set up of the FaxPress Xerox Interface, following the procedure in the next section of this chapter .
Installing the FaxPress Xerox Interface 5—9 Configuring the FaxPress Xerox Interface Use the following procedure to configure you r FaxPress Xerox Interface.
FaxPre ss Xerox Interface Guide 5—10 Xerox system users on the FaxP ress server . Email and Trace T ool settings are also provided, for adm inistrative purposes. 2. In the FaxPress tab, click the Add button to add you r FaxPress server to the lists of Incoming and Outgoing FaxPress Servers.
Installing the FaxPress Xerox Interface 5—1 1 3. The FaxPress Server selection dialog box appears, displaying a list of available servers. 4. Select a server (or servers) in the list th at is running version 8.0 or later FaxPress software, and enter the user name and password for the FaxPress supervisor for this serv er .
FaxPre ss Xerox Interface Guide 5—12 7. Click the Repository tab. 8. Click Add to specify a fax repository folder ..
Installing the FaxPress Xerox Interface 5—13 9. The Repository Folder Data dialog box appears. 10. Browse to and select the fax repository folder you have created on the FaxPress Xerox Interface work station. For details on this folder , see Creating the Fax Repository Folder on page 2-3 .
FaxPre ss Xerox Interface Guide 5—14 ( St a rt>Programs>FaxPress>Fax main ) then log in to the FaxPr ess server , right-click on it and choose Properties , then select the Line Setting s ta.
Installing the FaxPress Xerox Interface 5—15 14. Cli ck the Incoming_outgoi ng faxes tab. 15. Make the setti ngs you want for the Received Fax Notification choices.
FaxPre ss Xerox Interface Guide 5—16 interval. T ypically , you will want notifications to be sent for bot h successful and failed faxes, and yo u will want to leave the check- boxes for deleting failed faxes, and NOT sending cover pages unchecked, as shown.
Installing the FaxPress Xerox Interface 5—17 19. When you have made the email settings you want, click the User Map tab. 20. Leave the Auto Re gistration checkbox checked (the default), and the starting ID at ’1’. Click Add to add user mappings to the list.
FaxPre ss Xerox Interface Guide 5—18 Fax Repository user for each Fax Repository , and the FaxPress User Name must be the same as the Xerox User name in e ach case. 23. After m apping the user , you can enter their Email Addr ess if you want them to get email notificati ons of received and outgoing fax events.
Installing the FaxPress Xerox Interface 5—19 25. T o set up the user for receivin g pri nt-outs of incoming faxes, check the Print Incoming fax checkbox, then click the Printer Setting button. 26. In the Printer dialog box, select the printer from the pull-down menu; typically , you will choose the Xerox system, as in the fig- ure below .
FaxPre ss Xerox Interface Guide 5—20 31. In the Trace T ool tab, you can check the T race to file checkbox to log traces of fax transactions. 32. Enter a complete filename for the trace file, and a maxim um size, then enter a path to the location for Xero x T emp files.
Installing the FaxPress Xerox Interface 5—21 Accessing the FaxPress Xerox Interface Configuration Utility T o access the FaxPress Xerox Interface Configuratio n utility if you have exited the instal.
FaxPre ss Xerox Interface Guide 5—22.
Index A administrator accou nt fax repository 3-5 Xerox interface 5-7 attached faxes 5-15 Auto Registration, of users 5-17 C cover pages 5-16 CPU speed, requirement 1-5 E email notice 5-15 email notif.
FaxPre ss Xerox Interface Guide IX—2 T testing Xerox Int erface 5 -20 testing, Xerox interface system 1-6 Trace Tool 5-20 U User Map 5-17 user mapping 5-17 X Xerox Interface software accessing confi.
デバイスCastelle 61-1273-001の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Castelle 61-1273-001をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはCastelle 61-1273-001の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Castelle 61-1273-001の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Castelle 61-1273-001で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Castelle 61-1273-001を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はCastelle 61-1273-001の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Castelle 61-1273-001に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちCastelle 61-1273-001デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
