Chryslerメーカー11WK741-126-ABの使用説明書/サービス説明書
ページ先へ移動 of 583
Grand Cherok ee Chrysler Group LL C OWNER’S MANUAL 2011 2011 Grand Cherokee 11WK741-126-AB Second Edition Printed in U.S.A..
291680.ps 11JK72-126-AA Chrysler 1" gutter 05/14/2010 06:18:00 VEHICLES SOLD IN CANADA W ith r espect to any V ehicles Sold in Canada, the name Chrysler Group LLC shall be deemed to be deleted and the name Chrysler Canada Inc. used in substitution therefor e.
T ABLE OF CONTENTS SECTION P AGE 1 INTRODUCTION ............................................................ 3 2 THINGS TO KNOW BEFORE ST AR TING YOUR VEHICLE ............................. 1 1 3 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE ...........
.
INTRODUCTION CONTENTS 䡵 Introduction ........................... 4 䡵 Rollover W arning ....................... 5 䡵 How T o Use This Manual .................. 6 䡵 W arnings And Cautions ................... 8 䡵 V ehicle Identification Number .
INTRODUCTION Congratulations on selecting your new Chrysler Group LLC vehicle. Be assured that it r epresents pr ecision workmanship, distinctive styling, and high quality - all essentials that are traditional to our vehicles.
NOTE: After you read the manual, it should be stored in the vehicle for convenient referencing and remain with the vehicle when sold, so that the new owner will be aware of all safety warnings.
Failure to use the driver and passenger seat belts provided is a major cause of sever e or fatal injury . In fact, the U.S. government notes that the universal use of existing seat belts could cut the highway death toll by 10,000 or more each year and could r educe disabling injuries by two million annually .
INTRODUCTION 7.
W ARNINGS AND CAUTIONS This Owner’s Manual contains W ARNINGS against op- erating procedur es that could result in a collision or bodily injury . It also contains CAUTIONS against proce- dures that could r esult in damage to your vehicle. If you do not read this entir e manual, you may miss important information.
VEHICLE MODIFICA TIONS/AL TERA TIONS W ARNING! Any modifications or alterations to this vehicle could seriously affect its roadworthiness and safety and may lead to a collision resulting in serious injury or death.
.
THINGS T O KNOW BEFORE ST ARTING YOUR VEHICLE CONTENTS 䡵 A W ord About Y our Keys ................. 1 4 ▫ W ir eless Ignition Node (WIN) ............ 1 4 ▫ K e y F O B ........................... 1 5 ▫ Removing Key FOB From Ignition ......... 1 6 ▫ Key-In-Ignition Reminder .
▫ Remote Open W indow Featur e — If Equipped ......................... 2 5 ▫ Using The Panic Alarm ................. 2 5 ▫ Programming Additional T ransmitters ...... 2 6 ▫ T ransmitter Battery Replacement .......... 2 6 ▫ General Information .
▫ Automatic Locking Retractor Mode (ALR) — If Equipped ......................... 5 6 ▫ Seat Belt Pretensioners ................. 5 7 ▫ Supplemental Active Head Restraints (AHR) . . 57 ▫ Enhanced Seat Belt Use Reminder System (BeltAlert 威 ) .
A WORD ABOUT YOUR KEYS Y our vehicle uses a keyless ignition system. This system consists of a Key Fob with Remote Keyless Entry (RKE) transmitter and a W ir eless Ignition Node (WIN) with integral ignition switch. Y ou can insert the Key Fob into the ignition switch with either side up.
Key Fob The Key Fob operates the ignition switch. Insert the square end of the key fob into the ignition switch located on the instrument panel and r otate to the desired posi- tion. It also contains the Remote Keyless Entry (RKE) transmitter and an emergency key , which stores in the rear of the Key Fob.
T o remove the emer gency key , slide the mechanical latch at the top of the Key Fob sideways with your thumb and then pull the key out with your other hand. NOTE: Y ou can insert the double-sided emergency key into the lock cylinders with either side up.
• The power window switches, radio, power sunroof (if equipped), and power outlets will remain active for up to 10 minutes after the ignition switch is turned to the LOCK position. Opening either front door will cancel this feature. The time for this featur e is programmable.
Key-In-Ignition Reminder Opening the driver’s door when the Key Fob is in the ignition and the ignition switch position is OFF or ACC, sounds a signal to remind you to r emove the Key Fob. NOTE: The Key-In-Ignition reminder only sounds when the Key Fob is placed in the OFF or ACC ignition position.
If the V ehicle Security Light turns on during normal vehicle operation (vehicle running for longer than 10 sec- onds), it indicates that there is a fault in the electr onics. Should this occur , have the vehicle serviced as soon as possible by an authorized dealer .
Duplication of Key Fobs may be performed at an autho- rized dealer , this procedure consists of pr ogramming a blank Key Fob to the vehicle electronics. A blank Key Fob is one that has never been programmed. NOTE: When having the Sentry Key 威 Immobilizer system serviced, bring all vehicle Key Fobs with you to the authorized dealer .
NOTE: The Panic and Security alarms are quite dif fer- ent. Please take a moment to activate the Panic and the Security modes to hear the differ ences in the horn. In case one should go off in the futur e, you will need to know which mode has been activated in order to deactivate it.
T o Disarm The System V ehicles Not Equipped With Keyless Enter-N-Go T o disarm the V ehicle Security Alarm, you will need to press the UNLOCK button on the RKE transmitter or turn the ignition switch to the ON/RUN position.
The lights also will fade to off if you turn on the ignition after you close all the doors. Refer to “Electronic V ehicle Information Center (EVIC)/Personal Settings (Customer- Programmable Featur es)” in “Understanding Y our In- strument Panel” for further information.
T o Unlock The Doors Press and r elease the UNLOCK button on the RKE transmitter once to unlock the driver’s door or twice to unlock all doors. The turn signal lamps will flash to acknowledge the unlock signal. The illuminated entry system will also turn on.
T o Lock The Doors Press and r elease the LOCK button on the RKE transmit- ter to lock all doors. The turn signal lamps will flash and the horn will chirp to acknowledge the signal. Refer to “Keyless Enter-N-Go” under “Things T o Know Before Starting Y our V ehicle” for further information.
NOTE: The interior lights will turn off if you turn the ignition switch to the ACC or ON/RUN position while the Panic Alarm is activated. However , the exterior lamps and horn will remain on. Programming Additional T ransmitters Programming Key Fobs or RKE transmitters may be performed at an authorized dealer .
2. Insert the tip of the emergency key or a #2 flat blade screwdriver into the slot and gently pry the two halves of the RKE transmitter apart. Make sure not to damage the seal during removal.
4. T o assemble the RKE transmitter case, snap the two halves together . General Information This device complies with part 15 of the FCC rules and RSS 210 of Industry Canada. Operation is subject to the following conditions: • This device may not cause harmful interference.
How T o Use Remote Start All of the following conditions must be met before the engine will remote start: • Shift lever in P ARK • Doors closed • Hood closed • Liftgate/Flipper Glass closed .
• Remote Start Aborted — Hood Ajar • Remote Start Aborted — Fuel Low • Remote Start Aborted — System Fault • Remote Start Disabled — Start V ehicle to Reset The EVIC message stays active until the ignition is turned to the ON/RUN position.
T o Exit Remote Start Mode W ithout Driving The V ehicle Press and r elease the REMOTE ST AR T button one time or allow the engine to run for the entir e 15 minute cycle. NOTE: T o avoid unintentional shutdowns, the system will disable the one time press of the REMOTE ST AR T button for two seconds after receiving a valid Remote Start request.
Remote Start Comfort Systems — If Equipped When remote start is activated, the heated steering wheel, and driver heated seat features will automatically turn on in cold weather . In warm weather , the driver vented seat feature will automatically turn on when the remote start is activated.
W ARNING! • For personal security and safety in the event of an accident, lock the vehicle doors when you drive, as well as when you park and leave the vehicle. • When leaving the vehicle, always remove the key from the ignition and lock your vehicle.
If a rear door is locked, it cannot be opened fr om inside the vehicle without first unlocking the door . The door may be unlocked manually by raising the lock knob. Automatic Door Locks — If Equipped If this feature is selected, your door locks will lock automatically when the vehicle speed is above 15 mph (24 km/h) and all doors are closed.
3. Repeat steps 1 and 2 for the opposite rear door . W ARNING! A void trapping anyone in a vehicle in a collision. Remember that the rear doors can only be opened from the outside when the Child-Protection locks are engaged (locked).
NOTE: For emergency exit fr om the rear seats when the Child-Protection Door Lock System is engaged, manually raise the door lock knob to the unlocked position, roll down the window , and open the door using the outside door handle.
NOTE: If “Unlock All Doors 1st Press” is programmed all doors will unlock when you grab hold of the driver ’s front door handle. T o select between “Unlock Driver Door 1st Press” and “Unlo.
If one of the vehicle doors is open and the door panel switch is used to lock the vehicle, once all open doors have been closed, the vehicle checks the inside and outside of the vehicle for any valid Passive Entry RKE transmitters.
NOTE: If “Unlock All Doors 1st Press” is programmed in EVIC, all doors will unlock when you push the button on the liftgate. If ⬙ Unlock Driver Door 1st press ⬙ is programmed in EVIC, the lift.
NOTE: • After pressing the door handle LOCK button, you must wait two seconds before you can lock or unlock the doors, using either passive entry door handle.
W ARNING! Never leave children in a vehicle with the key in the ignition switch or leave a vehicle with Keyless Enter- N-Go in the ACC or ON/RUN position. Occupants, particularly unattended children, can become en- trapped by the windows while operating the power window switches.
during Auto Up. If this happens, pull the switch lightly to the first detent and hold it to close the window manually . W ARNING! There is no anti-pinch protection when the window is almost closed. Be sure to clear all objects from the window before closing.
Wind Buffeting W ind buf feting can be described as the perception of pressur e on the ears or a helicopter-type sound in the ears. Y our vehicle may exhibit wind buffeting with the windows down, or the sunroof (if equipped) in certain open or partially open positions.
Liftgate Flipper Glass The liftgate flipper glass is also unlocked when the liftgate is unlocked. T o open the flipper glass, push up on the window switch located on the liftgate.
Power Liftgate — If Equipped The power liftgate may be opened by pulling up on the liftgate handle or by pressing the LIFTGA TE button on the Remote Keyless Entry (RKE) transmitter . Press the LIFTGA TE button on the RKE transmitter twice within five seconds, to open the power liftgate.
W ARNING! During power operation, personal injury or cargo damage may occur . Ensure the liftgate travel path is clear . Make sure the liftgate is closed and latched before driving away .
• If the power liftgate encounters multiple obstructions within the same cycle, the system will automatically stop and the liftgate must be opened or closed manu- ally . • If your liftgate is power closing and you put the vehicle in gear , the liftgate will continue to power close.
• An energy-absorbing steering column and steering wheel • Knee bolsters for front seat occupants • Front seat belts incorporate pr etensioners to enhance occupant protection by managing occupan.
Buckle up even though you are an excellent driver , even on short trips. Someone on the road may be a poor driver and cause an accident that includes you. This can happen far away from home or on your own str eet. Research has shown that seat belts save lives, and they can reduce the seriousness of injuries in an accident.
W ARNING! (Continued) • It is dangerous to ride in a cargo area, inside or outside of a vehicle. In an accident, people riding in these areas are more likely to be seriously injured or killed. • Do not allow people to ride in any area of your vehicle that is not equipped with seats and seat belts.
W ARNING! • A belt that is buckled into the wrong buckle will not protect you properly . The lap portion could ride too high on your body , possibly causing internal injuries. Always buckle your belt into the buckle nearest you. • A belt that is too loose will not protect you properly .
W ARNING! (Continued) • A belt that is worn under your arm is dangerous. Y our body could strike the inside surfaces of the vehicle in an accident, increasing head and neck injury . A belt worn under the arm can cause internal injuries. Ribs aren’t as strong as shoulder bones.
6. T o release the belt, push the r ed button on the buckle. The belt will automatically retract to its stowed position. If necessary , slide the latch plate down the webbing to allow it to retract fully . W ARNING! A frayed or torn belt could rip apart in an accident and leave you with no protection.
2. At about 6 to 12 in (15 to 30 cm) above the latch plate, grasp and twist the belt webbing 180 degrees to cr eate a fold that begins immediately above the latch plate. 3. Slide the latch plate upward over the folded webbing. The folded webbing must enter the slot at the top of the latch plate.
NOTE: The adjustable upper shoulder belt anchorage is equipped with an Easy Up feature. This featur e allows the shoulder belt anchorage to be adjusted in the upward position without pushing the release button. T o verify the shoulder belt anchorage is latched, pull downward on the shoulder belt anchorage until it is locked into position.
Driver Center Passenger First Row N/A N/A ALR Second Row ALR ALR ALR Third Row N/A N/A N/A • N/A — Not Applicable • ALR — Automatic Locking Retractor If the passenger seating position is equip.
3. Allow the belt to retract. As the belt retracts, you will hear a clicking sound. This indicates the safety belt is now in the Automatic Locking Mode.
identified by any markings, only through visual inspec- tion of the head restraint. The head r estraint will be split in two halves, with the front half being soft foam and trim, the back half being decorative plastic.
CAUTION! All occupants, including the driver , should not oper - ate a vehicle or sit in a vehicle’s seat until the head restraints are placed in their proper positions in order to minimize the risk of neck injury in the event of an accident.
3. Pull down then rearward towards the r ear of the vehicle then down to engage the locking mechanism. 4. The AHR front soft foam and trim half should lock into the back decorative plastic half.
NOTE: • If you have difficulties or pr oblems resetting the Active Head Restraints, see an authorized dealer . • For safety reasons, have the Active Head Restraints checked by a qualified specialist at an authorized dealer .
The front passenger seat BeltAlert 威 is not active when the front passenger seat is unoccupied. BeltAlert 威 may be triggered when an animal or heavy object is on the fr ont passenger seat or when the seat is folded flat (if equipped).
Seatbelt Lock Out The center rear seat belt system has a lock out featur e that will not allow you to extract the center webbing unless the rear seat upper latch is engaged. Seat Belts and Pregnant Women W e recommend that pr egnant women use the seat belts throughout their pr egnancy .
instrument panel, above the glove compartment. The words SRS AIRBAG are embossed on the airbag covers. NOTE: These airbags are certified to the new Federal regulations for Advanced Airbags. The Advanced Front Airbags have a multistage inflator design.
This vehicle is equipped with Supplemental Seat-Mounted Side Airbags (SAB) to provide enhanced protection for an occupant during a side impact. The Supplemental Seat- Mounted Side Airbags are located in the outboar d side of the front seats.
Advanced Front Airbag Features The Advanced Front Airbag system has multistage driver and front passenger airbags. This system pr ovides output appropriate to the severity and type of collision as determined by the Occupant Restraint Controller (ORC), which may receive information fr om the front impact sensors.
Supplemental Seat-Mounted Side Airbags (SAB) Supplemental Seat-Mounted Side Airbags pr ovide en- hanced protection to help pr otect an occupant during a side impact. The Supplemental Seat-Mounted Side Air - bag is marked with an airbag label sewn into the out- board side of the fr ont seats.
Supplemental Side Airbag Inflatable Curtain (SABIC) SABIC airbags may offer side-impact and vehicle r ollover protection to fr ont and rear seat outboar d occupants in addition to that provided by the body str ucture.
• Being too close to the SAB and SABIC airbags during deployment could cause you to be severely injur ed or killed. • Should a vehicle rollover occur , the pretensioners, SAB and/or SABIC airbags on both sides of the vehicle may deploy .
Knee Impact Bolsters The Knee Impact Bolsters help protect the knees of the driver and the front passenger , and position front occu- pants for the best interaction with the Advanced Fr ont Airbags.
If a child from 1 to 12 years old (not in a r ear facing child seat) must ride in the front passenger seat, move the seat as far back as possible and use the proper child r estraint. (Refer to “Child Restraints”) Y ou should read the instr uctions provided with your child restraint to make sur e that you are using it pr operly .
W ARNING! (Continued) • Being too close to the steering wheel or instrument panel during Advanced Front Airbag deployment could cause serious injury , including death. Air- bags need room to inflate. Sit back, comfortably extending your arms to reach the steering wheel or instrument panel.
Advanced Front Airbags may deploy in crashes with little vehicle front-end damage but that pr oduce a severe initial deceleration. The side airbags will not deploy in all side collisions. Side airbag deployment will depend on the severity and type of collision.
W ARNING! Ignoring the Airbag W arning Light in your instru- ment panel could mean you won’t have the airbags to protect you in a collision. If the light does not come on as a bulb check when the ig.
Based on the severity and type of collision, the side airbag inflator on the crash side of the vehicle may be triggered, r eleasing a quantity of non-toxic gas. The inflating side airbag exits through the seat seam into the space between the occupant and the door .
Front And Side Impact Sensors In front and side impacts, fr ont and side impact sensors can aid the ORC in determining the appropriate r esponse to certain impact events.
If you do have a collision which deploys the airbags, any or all of the following may occur: • The nylon airbag material may sometimes cause abra- sions and/or skin reddening to the driver and fr ont passenger as the airbags deploy and unfold.
Maintaining Y our Airbag System W ARNING! • Modifications to any part of the airbag system could cause it to fail when you need it. Y ou could be injured if the airbag system is not there to protect you.
Airbag W arning Light Y ou will want to have the airbags ready to inflate for your protection in a collision. The Airbag W arning Light monitors the internal circuits and inter connecting wiring associated with airbag system electrical components.
• Whether or not the driver and passenger safety belts were buckled/fastened; • How far (if at all) the driver was depressing the accelerator and/or brake pedal; and, • How fast the vehicle was traveling. These data can help provide a better understanding of the circumstances in which crashes and injuries occur .
There ar e differ ent sizes and types of restraints for children fr om newborn size to the child almost large enough for an adult safety belt. Always check the child seat Owner’s Manual to ensure you have the right seat for your child. Use the restraint that is corr ect for your child.
W ARNING! • Rearward-facing child seats must never be used in the front seat of a vehicle with the front passenger airbag unless the airbag is turned off. An airbag deployment could cause severe injury or death to infants in this position. • Improper installation can lead to failure of an infant or child restraint.
restraint and slide the latch plate into the buckle. Then, pull the shoulder belt until it is fully extended from the retractor . Allow the belt to return into the r etractor , pulling on the excess webbing to tighten the lap portion around the child r estraint.
with knees bent over the vehicle’s seat cushion while the child’s back is against the seatback, they should use a belt-positioning booster seat. The child and belt- positioning booster seat are held in the vehicle by the lap/shoulder belt.
connection to the top tether anchorages, have been available for some time. For some older child restraints, many child restraint manufactur ers offer add-on tether strap kits or retr o-fit kits. Y ou are urged to take advantage of all the available attachments provided with your child restraint in any vehicle.
Installing The LA TCH-Compatible Child Restraint System W e urge you to car efully follow the directions of the manufacturer when installing your child r estraint. Not all child restraint systems will be installed as described her e. Again, carefully follow the installation instr uctions that were pr ovided with the child restraint system.
W ARNING! Do not use the cargo tie downs located on the load floor . Improper usage of the tether can lead to a failure of an infant or child restraint.
Many , but not all restraint systems will be equipped with separate straps on each side, with each having a hook or connector for attachment to the lower anchorage and a means of adjusting the tension in the strap.
the child restraint so that it is not necessary to use a locking clip. If the seat belt has a cinching latch plate, pulling up on the shoulder portion of the lap/shoulder belt will tighten the belt.
Pull down on the tether to unhook it from the plastic seat backing, then raise the armrest and attach the tether hook to the strap located on the front of the arm r est. For center seating position route the tether strap over the seatback and headrest then attach the hook to the tether anchor located on the back of the seat.
T op T ether Strap Anchorage (Located on Seatback) T op T ether Strap Mounting 2 THINGS TO KNOW BEFORE ST ARTING YOUR VEHICLE 91.
W ARNING! • An incorrectly anchored tether strap could lead to increased head motion and possible injury to the child. Use only the anchor positions directly be- hind the child seat to secure a child restraint top tether strap. • Do not use the cargo tie downs located on the load floor .
While cruising, brief full-thr ottle acceleration within the limits of local traffic laws, contributes to a good br eak-in. W ide-open thr ottle acceleration in low gear can be detri- mental and should be avoided. The engine oil installed in the engine at the factory is a high-quality energy conserving type lubricant.
Exhaust Gas W ARNING! Exhaust gases can injure or kill. They contain carbon monoxide (CO), which is colorless and odorless. Breathing it can make you unconscious and can eventually poison you.
Safety Checks Y ou Should Make Inside The V ehicle Seat Belts Inspect the belt system periodically , checking for cuts, frays, and loose parts. Damaged parts must be replaced immediately . Do not disassemble or modify the system. Front seat belt assemblies must be r eplaced after a collision.
W ARNING! Pedals that cannot move freely can cause loss of vehicle control and increase the risk of serious per- sonal injury . • Always make sure that floor mats are properly attached to the floor mat fasteners.
Periodic Safety Checks Y ou Should Make OutsideThe V ehicle T ires Examine tires for excessive tr ead wear and uneven wear patterns. Check for stones, nails, glass, or other objects lodged in the tread. Inspect the tr ead and sidewall for cuts and cracks.
.
UNDERST ANDING THE FEA TURES OF YOUR VEHICLE CONTENTS 䡵 Mirrors ............................. 1 0 6 ▫ Inside Day/Night Mirror ............... 1 0 6 ▫ Automatic Dimming Mirror — If Equipped . . 107 ▫ Outside Mirrors ..................... 1 0 8 ▫ Outside Mirrors Folding Featur e .
▫ Passenger’s Power Seat ................ 1 2 2 ▫ Power Lumbar — If Equipped ........... 1 2 4 ▫ Manual Front Seats Forwar d/Rearward Adjustment ........................ 1 2 5 ▫ Manual Front Passenger Seatback Adjustment — Recline ......
▫ Daytime Running Lights — If Equipped .... 1 4 7 ▫ Automatic Headlight Leveling — HID Headlights Only ..................... 1 4 7 ▫ Headlight Delay ..................... 1 4 7 ▫ Parking Lights And Panel Lights ......... 1 4 8 ▫ Fog Lights — If Equipped .
䡵 Electronic Speed Contr ol ................ 1 6 1 ▫ T o Activate ......................... 1 6 2 ▫ T o Set A Desired Speed ................ 1 6 3 ▫ T o Deactivate ....................... 1 6 3 ▫ T o Resume Speed .................... 1 6 3 ▫ T o V ary The Speed Setting .
䡵 Parksense 威 Rear Park Assist — If Equipped . . . 192 ▫ Parksense 威 Sensors ................... 1 9 3 ▫ Parksense 威 W arning Display ............ 1 9 3 ▫ Parksense 威 Display ................... 1 9 4 ▫ Enabling And Disabling Park Sense 威 .
䡵 Power Sunroof — If Equipped ............ 2 1 2 ▫ Opening Sunroof — Expr ess ............ 2 1 3 ▫ Closing Sunroof — Expr ess ............. 2 1 3 ▫ Pinch Protect Featur e ................. 2 1 3 ▫ Pinch Protect Override ...............
䡵 Electrical Power Outlets ................. 2 1 9 䡵 Power Inverter — If Equipped ............ 2 2 2 䡵 Cupholders .......................... 2 2 4 䡵 Storage ............................. 2 2 5 ▫ Glove Compartment .................. 2 2 5 ▫ Door Storage .
MIRRORS Inside Day/Night Mirror A single ball joint mirror is pr ovided in the vehicle. It is a twist on mirror that has a fixed position. The mirr or head can be adjusted up, down, left, and right for various drivers. The mirror should be adjusted to center on the view through the r ear window .
Automatic Dimming Mirror — If Equipped This mirror automatically adjusts for headlight glar e from vehicles behind you. Y ou can turn the feature on or off by pr essing the button at the base of the mirror . A light in the button will illuminate to indicate when the dim- ming feature is activated.
Outside Mirrors T o receive maximum benefit, adjust the outside mirr ors to center on the adjacent lane of traffic with a slight overlap of the view obtained on the inside mirror . W ARNING! V ehicles and other objects seen in the passenger side convex mirror will look smaller and farther away than they really are.
Outside Power Mirrors The power mirror switch is located on the driver’s side door trim panel. The power mirror contr ols consist of mirror select but- tons and a four-way mirr or control switch. T o adjust a mirror , press the mirr or select button for the mirror that you want to adjust.
Heated Mirrors — If Equipped These mirrors ar e heated to melt frost or ice. This feature is activated whenever you turn on the r ear window defroster . Refer to “Rear W indow Featur es” in “Understanding the Features of Y our V ehicle” for further information.
BLIND SPOT MONITORING — IF EQUIPPED The Blind Spot Monitoring (BSM) system uses two radar- based sensors, located inside the rear bumper fascia, to detect highway licensable vehicles (automobiles, trucks, motorcycles, etc.) that enter the blind spot zones fr om the rear/fr ont/side of the vehicle.
• The BSM system detection zone DOES NOT change if your vehicle is towing a trailer . Therefore, visually verify the adjacent lane is clear for both your vehicle and trailer before making a lane change.
The BSM system notifies the driver of objects in the detection zones by illuminating the BSM warning light located in the outside mirrors. The BSM system can also be configured to sound an audible (chime) alert and reduces the radio volume to notify the driver of objects that have entered the detec- tion zones.
Entering From The Side V ehicles that move into your adjacent lanes from either side of the vehicle. Entering From The Rear V ehicles that come up from behind your vehicle on either side and enter the rear detection zone with a r elative speed of less than 30 mph (48 km/h).
Overtaking T raf fic If you pass another vehicle slowly (with a relative speed less than 10 mph (16 km/h) and the vehicle remains in the blind spot for approximately 1.5 seconds, the warning light will be illuminated. If the differ ence in speed between the two vehicles is greater than 10 mph (16 km/h), the warning light will not illuminate.
The BSM system is designed not to issue an alert on stationary objects such as guardrails, posts, walls, foliage, berms, etc. However , occasionally the system may alert on such objects. This is normal operation and your vehicle does not requir e service.
W ARNING! The Blind Spot Monitoring system is only an aid to help detect objects in the blind spot zones. The BSM system is not designed to detect pedestrians, bicy- clists, or animals.
NOTE: In a parking lot situation, oncoming vehicles can be obscured by vehicles parked on either side. If the sensors are blocked by other str uctures or vehicles, the system will not be able to alert the driver .
signal is then activated, and it corresponds to an alert present on that side of the vehicle, an audible chime will also be sounded. Whenever a turn signal and detected object are pr esent on the same side at the same time, both the visual and audio alerts will be issued.
VOICE COMMAND — IF EQUIPPED V oice Commands can be initiated by pressing the VR button located on the radio or steering wheel controls (if equipped). Refer to “V oice Command” in the Uconnect™ User Manual located on the DVD for further details.
Adjusting The Seat Forward Or Rearward The seat can be adjusted both forward and r earward. Push the seat switch forward or r earward, the seat will move in the direction of the switch. Release the switch when you have reached the desir ed position. Adjusting The Seat Up Or Down The height of the seats can be adjusted up or down.
Reclining The Seatback The angle of the seatback can be adjusted forward or backward. Push the seatback switch forwar d or rear - ward, the seat will move in the dir ection of the switch. Release the switch when you have reached the desir ed position.
Adjusting The Seat Forward Or Rearward The seat can be adjusted both forward and r earward. Push the seat switch forward or r earward, the seat will move in the direction of the switch. Release the switch when you have reached the desir ed position. Adjusting The Seat Up Or Down The height of the seats can be adjusted up or down.
CAUTION! Do not place any article under a power seat or impede its ability to move as it may cause damage to the seat controls. Seat travel may become limited if movement is stopped by an obstruction in the seat’ s path. Power Lumbar — If Equipped V ehicles equipped with power driver or passenger seats are also equipped with power lumbar .
Manual Front Seats Forward/Rearward Adjustment Some models may be equipped with manual front driver or passenger seats. The seats can be adjusted forward or rearwar d by using a bar located by the front of the seat cushion, near the floor .
Manual Front Passenger Seatback Adjustment — Recline T o adjust the seatback, lift the lever located on the outboard side of the seat, lean back to the desir ed position and release the lever . T o return the seatback, lift the lever , lean forward and release the lever .
Heated Seats — If Equipped On some models, the front and r ear seats may be equipped with heaters in both the seat cushions and seatbacks. W ARNING! • Persons who are unable to feel pain to the sk.
CAUTION! Repeated overheating of the seat could damage the heating element and/or degrade the material of the seat. V ehicles Equipped with Remote Start On models that are equipped with r emote start, the driver ’s heated seat can be programmed to come on during a remote start.
Rear Heated Seats On some models, the two outboard seats ar e equipped with heated seats. There ar e two heated seat switches that allow the rear passengers to operate the seats indepen- dently . The heated seat switches for each heater are located on the rear of the center console.
to one, indicating the change. The LOW -level setting will turn OFF automatically after a maximum of 45 minutes. V entilated Seats — If Equipped On some models, both the driver and passenger seats are ventilated.
Head Restraints Head restraints ar e designed to reduce the risk of injury by restricting head movement in the event of a r ear- impact. Head restraints should be adjusted so that the top of the head restraint is located above the top of your ear .
T o raise the head restraint, pull upwar d on the head restraint. T o lower the head restraint, press the push button, located at the base of the head restraint, and push downward on the head r estraint. For comfort the Active Head Restraints can be tilted forward and r earward.
NOTE: • The head restraints should only be r emoved by quali- fied technicians, for service purposes only . If either of the head restraints r equire r emoval, see your autho- rized dealer .
W ARNING! (Continued) • Active Head Restraints may be deployed if they are struck by an object such as a hand, foot or loose cargo. T o avoid accidental deployment of the Ac- tive Head Restraint ensure that all cargo is se- cured, as loose cargo could contact the Active Head Restraint during sudden stops.
W ARNING! Sitting in a seat with the head restraint in its lowered position could result in serious injury or death in a collision. Always make sure the outboard head re- straints are in their upright positions when the seat is to be occupied.
2. Fold the rear seat completely forwar d. T o Raise Rear Seat Raise the rear seatback and lock it into place. If interfer - ence from the car go area pr events the seatback from fully locking, you will have difficulty r eturning the seat to its proper position.
Reclining Rear Seat T o recline the seatback, lift the lever located on the outboard side of the seat, lean back and r elease the lever at the desired position.
DRIVER MEMOR Y SEA T — IF EQUIPPED Once programmed, the memory buttons 1 and 2 on the driver’s door panel can be used to recall the driver’s seat, driver’s outside mirror , adjustable steering wheel posi- tion (if equipped), and the radio station preset settings.
Setting Memory Positions and Linking Remote Keyless Entry T ransmitter to Memory NOTE: Each time the S (SET) button and a numbered button 1 or 2 are pr essed, you erase the memory settings for that button and store a new one. 1. Insert the ignition key , and turn the ignition switch to the ON position.
to “Electronic V ehicle Information Center (EVIC)/ Customer-Pr ogrammable Features” in “Understanding Y our Instrument Panel” for further information. 12. Repeat the above steps to set the next memory position, using the other numbered memory button, or to link another RKE transmitter to memory .
3. Press and r elease the memory S (SET) button located on the driver’s door . 4. W ithin five seconds, pr ess and release MEMOR Y button 1 on the driver’s door . 5. W ithin five seconds, pr ess and release the UNLOCK button on the RKE transmitter .
driving position when the key is placed into the ignition, and turned out of the LOCK position toward the ACC/ON position. The Easy Entry/Exit feature will be automatically dis- abled if the seat is already positioned closer than 0.9 in (23 mm) forward of the r ear stop.
2. Reach under the hood, move safety latch to the left and lift the hood. CAUTION! T o prevent possible damage, do not slam the hood to close it. Use a firm downward push at the center of the hood to ensure that both latches engage. W ARNING! Be sure the hood is fully latched before driving your vehicle.
LIGHTS Headlight Switch The headlight switch is located on the left side of the instrument panel, next to the steering wheel. The head- light switch controls the operation of the headlights, parking lights, instrument panel lights, car go lights and fog lights (if equipped).
CAUTION! Do not use abrasive cleaning components, solvents, steel wool or other abrasive materials to clean the lenses. Automatic Headlights — If Equipped This system automatically turns the headlights on or off according to ambient light levels. T o turn the system on, rotate the headlight switch to the A (AUTO) position.
NOTE: When your headlights come on during the daytime, the instrument panel lights will automatically dim to the lower nighttime intensity . Refer to “Lights” in this section for further information.
2. Push back on the multifunction lever once again to reactivate the system. NOTE: Broken, muddy , or obstructed headlights and taillights of vehicles in the field of view will cause headlights to remain on longer (closer to the vehicle). Also, dirt, film, and other obstructions (sticker , toll box, etc.
The headlight delay time is programmable on vehicles equipped with an Electronic V ehicle Information Center (EVIC). Refer to “Electronic V ehicle Information Center (EVIC)/Customer-Pr ogrammable Features” in “Under - standing Y our Instrument Panel” for further information.
Interior Lights Courtesy and dome lights are turned on when the fr ont doors are opened, when the dimmer contr ol (rotating wheel on the right side of the headlight switch) is rotated to the its farthest upward position, or if equipped, when the UNLOCK button is pressed on the Remote Keyless Entry (RKE) transmitter .
Lights-on Reminder If the headlights, parking lights, or cargo lights ar e left on after the ignition is turned OFF , a chime will sound when the driver ’s door is opened. Battery Saver T o protect the life of your vehicle’s battery , load shedding is provided for both the interior and exterior lights.
Each light can be turned on by pressing a switch on either side of the console. These buttons are backlit for night time visibility . T o turn the lights off, press the switch a second time. The lights will also turn on when the UNLOCK button on the Remote Keyless Entry (RKE) is pressed.
Multifunction Lever The multifunction lever is located on the left side of the steering column. T urn Signals Move the multifunction lever up or down and the arrows on each side of the instrument cluster flash to show proper operation of the fr ont and rear turn signal lights.
High/Low Beam Switch Push the multifunction lever toward the instr ument panel to switch the headlights to high beam. Pulling the multifunction back toward the steering wheel will turn the low beams back on, or shut the high beams off.
Windshield Wiper Operation Rotate the end of the lever to one of the first four detent positions for intermittent settings, the fifth detent for low wiper operation and the sixth detent for high wiper operation. CAUTION! Always remove any buildup of snow that prevents the windshield wiper blades from returning to the “park” position.
NOTE: If the vehicle is moving less than 10 mph (16 km/h), delay times will be doubled. Windshield W asher Operation T o use the washer , push on the end of the lever (toward the steering wheel) and hold while spray is desired.
If the end of the lever is pushed while the wipers are in the off position, the wipers will operate for several wipe cycles, then turn off. W ARNING! Sudden loss of visibility through the windshield could lead to a collision. Y ou might not see other vehicles or other obstacles.
The sensitivity of the system can be adjusted with the multifunction lever . W iper delay position 1 is the least sensitive, and wiper delay position 4 is the most sensi- tive. Setting 3 should be used for normal rain conditions. Settings 1 and 2 can be used if the driver desires less wiper sensitivity .
TIL T/TELESCOPING STEERING COLUMN This feature allows you to tilt the steering column upward or downwar d. It also allows you to lengthen or shorten the steering column. The tilt/telescoping lever is located below the steering wheel at the end of the steering column.
POWER TIL T/TELESCOPING STEERING COLUMN — IF EQUIPPED This feature allows you to tilt the steering column upward or downwar d. It also allows you to lengthen or shorten the steering column. The power tilt/telescoping steering column lever is located below the multifunction lever on the steering column.
W ARNING! Do not adjust the steering column while driving. Adjusting the steering column while driving or driv- ing with the steering column unlocked, could cause the driver to lose control of the vehicle. Be sure the steering column is locked before driving your ve- hicle.
W ARNING! • Persons who are unable to feel pain to the skin because of advanced age, chronic illness, diabetes, spinal cord injury , medication, alcohol use, ex- haustion, or other physical conditions must exer- cise care when using the steering wheel heater .
NOTE: In order to ensur e proper operation, the Elec- tronic Speed Contr ol System has been designed to shut down if multiple Speed Control functions ar e operated at the same time.
T o Set A Desired Speed T urn the Electronic Speed Contr ol ON. When the vehicle has reached the desir ed speed, press the SET (-) button and release. Release the accelerator and the vehicle will operate at the selected speed. NOTE: The vehicle should be traveling at a steady speed and on level ground befor e pressing the SET button.
T o Accelerate For Passing Press the accelerator as you would normally . When the pedal is released, the vehicle will r eturn to the set speed. Using Electronic Speed Control On Hills The transmission may downshift on hills to maintain the vehicle set speed.
ACC will allow you to keep cruise contr ol engaged in light to moderate traffic conditions without the constant need to reset your cr uise control. ACC utilizes a radar sensor designed to detect a vehicle directly ahead of you. NOTE: • If the sensor does not detect a vehicle ahead of you, ACC will maintain a fixed set speed.
W ARNING! (Continued) − Cannot take street, traffic, and weather conditions into account, and may be limited upon adverse sight distance conditions. − Does not predict the lane curvature or the move- ment of preceding vehicles and will not compensate for such changes.
The Cruise Contr ol system has two control modes: • Adaptive Cruise Contr ol mode for maintaining an appropriate distance between vehicles. • Normal (fixed speed) cruise contr ol mode for cruising at a constant preset speed. For additional information, refer to “Normal (Fixed Speed) Cr uise Control Mode” in this section.
NOTE: Any chassis/suspension modifications to the vehicle will effect the performance of the Adaptive Cruise Control. Activating Adaptive Cruise Control (ACC) Y ou can only activate ACC if the vehicle speed is above 25 mph (40 km/h).
T o Activate Push and release the ON/OFF button. The ACC menu in the EVIC displays “Adaptive Cruise Ready .” T o turn the system OFF , push and release the ON/OFF button again. At this time, the system will turn off and the EVIC will display “Adaptive Cruise Contr ol Off.
T o Set A Desired ACC Speed When the vehicle reaches the speed desir ed, push the SET - button and release. The EVIC will display the set speed. Remove your foot from the accelerator pedal. If you do not, the vehicle may continue to accelerate beyond the set speed.
T o Cancel The system will disable ACC without erasing the memory if: • Y ou softly tap the brake pedal. • Y ou depress the brake pedal. • Y ou press the CANCEL switch. • An Anti-Lock Brake System (ABS) event occurs. • A T railer Sway Control (TSC) event occurs.
NOTE: If ACC is resumed or set with the ESC/TCS is off, ESC will automatically be r e-engaged. T o T urn Off The system will turn off and erase the set speed in memory if: • Y ou push and release the ON/OFF button. • Y ou turn OFF the ignition. • Y ou switch off ESC.
W ARNING! The Resume function should only be used if traffic and road conditions permit. Resuming a set speed that is too high or too low for prevailing traffic and road conditions could cause the vehicle to accelerate or decelerate too sharply for safe operation.
• The ACC system maintains set speed when driving up hill and down hill. However , a slight speed change on moderate hills is normal. In addition, downshifting may occur while climbing uphill or descending down- hill. This is normal operation and necessary to main- tain set speed.
Distance Setting 2 Distance Setting 1 3 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE 175.
T o change the distance setting, press the Distance button and release. Each time the button is pr essed, the distance setting adjusts between long, medium, and short.
Adaptive Cruise Control (ACC) Menu The EVIC displays the current ACC system settings. The EVIC is located in the upper part of the instrument cluster between the speedometer and the tachometer . The information it displays depends on ACC system status.
The set speed will continue to display in place of the odometer reading when changing the EVIC display while ACC is set. The ACC screen will display once again if any ACC activity occurs, which may in.
system may also become temporarily blinded due to obstructions, such as mud, dirt or ice. In these cases, the EVIC will display “Clean Radar Sensor In Front Of V ehicle” and the system will deactivate. NOTE: If the ACC “Clean Radar Sensor In Front Of V ehicle” warning is active Normal (Fixed Speed) Cruise Control is still available.
• Do not attach or install any accessories near the sensor , including transparent material or aftermarket grilles. Doing so could cause an ACC system failure or malfunction.
NOTE: When the sensor is removed, Adaptive Cruise Control, Normal Cr uise Control, and Forward Collision W arning will not be available. The cluster will display the warning “ACC/FCW Unavailable - Service Radar Sen- sor .” T o reinstall the sensor and bracket assembly r everse the process above.
Precautions While Driving With ACC In certain driving situations, ACC may have detection issues. In these cases, ACC may brake late or unexpect- edly . The driver needs to stay alert and may need to intervene. Adding A T railer Hitch The weight of a trailer hitch may affect the performance of ACC.
ACC may occasionally provide braking and/or a driver alert that you consider unnecessary . This may be the system’s response to signs, guar drails, and other station- ary objects in a curve. This may also occur at the base of steep hills. This is normal operation and your vehicle does not requir e service.
Lane Changing ACC will not detect a vehicle until it is completely in the lane in which you are traveling. In the illustration shown, ACC has not yet detected the vehicle changing lanes and it may not detect the vehicle until it’s too late for the ACC system to take action.
Stationary Objects And V ehicles ACC does not react to stationary objects and stationary vehicles. For example, ACC will not react in situations where the vehicle you ar e following exits your lane and the vehicle ahead is stopped in your lane. Always be attentive and ready to apply the brakes if necessary .
Normal (Fixed Speed) Cruise Control Mode In addition to Adaptive Cruise Control mode, a normal (fixed speed) Cruise Contr ol mode is available for cruis- ing at fixed speeds. The normal Cruise Contr ol mode is designed to maintain a set cruising speed without r equir- ing the driver to operate the accelerator .
T o V ary The Speed Setting There ar e two ways to change the set speed: • Use the accelerator pedal to adjust the vehicle to the desired speed and pr ess the SET - button. • T ap the RES + or SET - button to increase or decr ease the set speed in 1 mph (1 km/h) increments r espec- tively .
Forward Collision W arning — If Equipped Forward Collision W arning (FCW) warns the driver of a potential collision with the vehicle in front of you and prompts the driver to take action in or der to avoid the collision.
W ARNING! Forward Collision W arning (FCW) is not intended to avoid a collision on its own. The driver has the responsibility to avoid a collision by controlling the vehicle via braking and steering. Failure to follow this warning could lead to serious injury or death.
Changing the FCW status to the “Near” setting, allows the system to warn you of a possible collision with the vehicle in front of you when you ar e much closer . This setting provides less r eaction time than the “Far” setting, which allows for a more dynamic driving experience.
NOTE: • The system will retain the last setting selected by the driver after ignition shut down. • FCW will not react to irr elevant objects such as over- head objects, ground r eflections, objects not in the path of the car , stationary objects that are far away , oncom- ing traffic, or leading vehicles with the same or higher rate of speed.
Service FCW W arning If the system turns off, and the EVIC displays “ACC/ FCW Unavailable Service Radar Sensor”, it indicates there is an internal system fault. Although the vehicle is still drivable under normal conditions, have the system checked by an authorized dealer .
ParkSense 姞 Sensors The four ParkSense 威 sensors, located in the rear fascia/ bumper , monitor the area behind the vehicle that is within the sensors’ field of view .
ParkSense 姞 Display When the vehicle is in REVERSE, the warning display will turn ON indicating the system status. Rear Park Assist ON Rear Park Assist Disabled 194 UNDERST ANDING THE FEA TURES OF Y.
The system will indicate a detected obstacle by showing three solid ar cs and will produce a one-half second tone. As the vehicle moves closer to the object the EVIC display will show fewer arcs and the sound tone will change from slow , to fast, to continuous.
The vehicle is close to the obstacle when the EVIC display shows one flashing arc and sounds a continuous tone. The following chart shows the warning alert operation when the system is detecting an ob.
W ARNING ALER TS Rear Distance (in/cm) Greater than 79 in (200 cm) 79-39 in (200-100 cm) 39-25 in (100-65 cm) 25-12 in (65-30 cm) Less than 12 in (30 cm) Audible Alert Chime None Single 1/2 Second T o.
approximately five seconds. Refer to “Electr onic V ehicle Information Center (EVIC)” in “Understanding Y our Instrument Panel” for further information. When the shift lever is moved to REVERSE and the system is disabled, the EVIC will display the “P ARK ASSIST OFF” message for as long as the vehicle is in REVERSE.
If “SER VICE P ARK ASSIST SYSTEM” appears in the EVIC, see your authorized dealer . Cleaning the ParkSense 姞 System Clean the ParkSense 威 sensors with water , car wash soap and a soft cloth. Do not use rough or har d cloths. Do not scratch or poke the sensors.
• Objects such as bicycle carriers, trailer hitches, etc., must not be placed within 12 in (30 cm) from the r ear fascia/bumper while driving the vehicle. Failure to do so can result in the system misinterpr eting a close object as a sensor problem, causing the “SER VICE P ARK ASSIST SYSTEM” message to be displayed in the instrument cluster .
W ARNING! • Drivers must be careful when backing up even when using the ParkSense 威 Rear Park Assist Sys- tem. Always check carefully behind your vehicle, look behind you, and be sure to check for pedes- trians, animals, other vehicles, obstructions, and blind spots before backing up.
P ARKVIEW 姞 REAR BACK UP CAMERA — IF EQUIPPED Y our vehicle may be equipped with the ParkV iew 威 Rear Back Up Camera that allows you to see an on-screen image of the rear surr oundings of your vehicle whenever the shift lever is put into REVERSE.
W ARNING! Drivers must be careful when backing up even when using the ParkV iew 威 Rear Back Up Camera. Always check carefully behind your vehicle, and be sure to check for pedestrians, animals, other vehicles, ob- structions, or blind spots before backing up.
4. Enable or disable the rear camera featur e by selecting “enable rear camera in r everse” soft key . 5. Press the “save” soft key . T urning ParkView 姞 On or Off — Without Navigation/Multimedia Radio 1. Press the “menu” har d key . 2.
The lights also turn on when a front door or r ear door is opened, when the UNLOCK button on the Remote Keyless Entry (RKE) transmitter is pressed, or when the dimmer wheel is moved up to the dome ON position. Sunglasses Storage At the rear of the console a compartment is pr ovided for the storage of a pair of sunglasses.
GARAGE DOOR OPENER — IF EQUIPPED HomeLink 威 replaces up to thr ee remote contr ols (hand- held transmitters) that operate devices such as garage door openers, motorized gates, lighting or home security systems. The HomeLink 威 unit operates off your vehicle’s battery .
W ARNING! • Y our motorized door or gate will open and close while you are training the universal transceiver . Do not train the transceiver if people, pets or other objects are in the path of the door or gate. Only use this transceiver with a garage door opener that has a “stop and reverse” feature as required by Federal safety standards.
Place the handheld transmitter 1 to 3 in (3 to 8 cm) away from the HomeLink 威 button you wish to pr ogram while keeping the indicator light in view .
This can usually be found where the hanging antenna wire is attached to the garage door opener motor . It is NOT the button normally used to open and close the door . 1. Firmly press and r elease the LEARN or TRAINING button. The name and color of the button may vary by manufacturer .
Gate Operator/Canadian Programming Canadian radio frequency laws r equire transmitter sig- nals to time-out (or quit) after several seconds of trans- mission – which may not be long enough for HomeLink 威 to pick up the signal during programming. Similar to this Canadian law , some U.
3. W ithout releasing the button, proceed with Pr ogram- ming HomeLink 威 Step 2 and follow all remaining steps. Security It is advised to erase all channels before you sell or turn in your vehicle. T o do this, press and hold the two outside buttons for 20 seconds until the red indicator flashes.
NOTE: • The transmitter has been tested and it complies with FCC and IC rules. Changes or modifications not expressly appr oved by the party responsible for com- pliance could void the user ’s authority to operate the device.
W ARNING! • Never leave children in a vehicle with the key in the ignition switch. Occupants, particularly unat- tended children, can become entrapped by the power sunroof while operating the power sunroof switch. Such entrapment may result in serious injury or death.
NOTE: If three consecutive sunr oof close attempts re- sult in Pinch Protect r eversals, the fourth close attempt will be a Manual Close movement with Pinch Protect disabled. Pinch Protect Override If a known obstruction (ice, debris, etc.) pr events closing the sunroof, pr ess the switch forward and hold for two seconds after the reversal occurs.
Sunroof Maintenance Use only a nonabrasive cleaner and a soft cloth to clean the glass panel. Ignition OFF Operation The power sunroof switches r emain active for up ap- proximately ten minutes after the ignition switch has been turned OFF . Opening either front door will cancel this feature.
W ARNING! • Never leave children in a vehicle with the key in the ignition switch. Occupants, particularly unat- tended children, can become entrapped by the power sunroof while operating the power sunroof switch. Such entrapment may result in serious injury or death.
Closing Sunroof – Express Press the sunr oof switch forward for less than one second and release, and the sunr oof glass will automatically close from any position, then stop. This is called “Expr ess Close”. During Express Close operation, any sunr oof switch press or shade switch pr ess will stop the sunroof.
Pinch Protect Feature This feature will detect an obstr uction in the opening of the sunroof or the shade during any close operation. If an obstruction is detected, the sunr oof or shade will auto- matically reverse dir ection to release the obstruction.
together to minimize the buffeting. If the buf feting occurs with the sunroof open, adjust the sunr oof opening to minimize the buffeting or open any window . Sunroof Maintenance Use only a non-abrasive cleaner and a soft cloth to clean the glass panel.
• T o ensure pr oper operation a MOP AR 威 knob and element must be used. • Do not exceed the maximum power of 160 W atts (13 Amps) at 12 V olts. If the 160 W att (13 Amp) power rating is exceeded the fuse protecting the system will need to be replaced.
The rear power outlet is located in the right r ear cargo area. W ARNING! T o avoid serious injury or death: • Only devices designed for use in this type of outlet should be inserted into any 12 V olt outlet.
W ARNING! (Continued) • Do not touch with wet hands. • Close the lid when not in use and while driving the vehicle. • If this outlet is mishandled, it may cause an electric shock and failure. CAUTION! • Many accessories that can be plugged in draw power from the vehicle’s battery , even when not in use (i.
150 W atts. Certain high-end video games, such as Play- station3 and XBox360 will exceed this power limit, as will most power tools. The power inverter is designed with built-in overload protection. If the power rating of 150 W atts is exceeded, the power inverter will automatically shut down.
W ARNING! T o avoid serious injury or death: • Do not use a three-prong adaptor . • Do not insert any objects into the receptacles. • Do not touch with wet hands. • Close the lid when not in use. • If this outlet is mishandled it may cause an electric shock and failure.
There ar e two cupholders for the rear seat passengers located in the fold-down center armrest. STORAGE Glove Compartment The glove compartment is located on the right side of the instrument panel.
T o open the glove compartment, pull outward on the latch and lower the glove box door . Door Storage Large storage ar eas are built into the door panels for easy access.
Center Console The center console contains both an upper and a lower storage area. T o open the upper storage compartment, pull upward on the small latch located on the lid.
Lift upward on the lar ger of the latches to access the lower storage compartment. CARGO AREA FEA TURES Rechargeable Flashlight The rechar geable flashlight is mounted on the left side of the cargo ar ea. The flashlight snaps out of the bezel when needed.
T o operate the flashlight, press the switch once for high, twice for low , and a third time to r eturn to off. Cargo Storage Bins There ar e four removable storage bins located in the r ear cargo ar ea. There ar e two storage bins located on either side of the cargo ar ea.
T wo additional storage bins are located under the load floor . T o access the lower storage bins, raise the load floor and attach the tether hook (attached to the bottom of the load floor) to the liftgate opening.
Retractable Cargo Area Cover — If Equipped NOTE: The purpose of this cover is for privacy , not to secure loads. It will not pr event cargo fr om shifting or protect passengers fr om loose cargo. T o cover the cargo ar ea: 1. Grasp the cover at the center handle.
W ARNING! In a collision, a loose cargo cover in the vehicle could cause injury . It could fly around in a sudden stop and strike someone in the vehicle. Do not store the cargo cover on the cargo floor or in the passenger compart- ment. Remove the cover from the vehicle when taken from its mounting.
W ARNING! • T o help protect against personal injury , passengers should not be seated in the rear cargo area. The rear cargo space is intended for load carrying purposes only , not for passengers, who should sit in seats and use seat belts. • Cargo tie-down hooks are not safe anchors for a child seat tether strap.
REAR WINDOW FEA TURES Rear Window Wiper/W asher The rear wiper/washer is contr olled by a rotary switch located on the control lever . The control lever is located on the left side of the steering column.
If the rear wiper is operating when the ignition is turned OFF , the wiper will automatically return to the “park” position. If the liftgate flipper glass is open, the rear window wiper/washer functionality is interrupted and the wiper stops at that “park” position.
ROOF LUGGAGE RACK — IF EQUIPPED The crossbars and siderails ar e designed to carry the weight on vehicles equipped with a luggage rack. The load must not exceed 150 lbs (68 kg), and should be uniformly distributed over the luggage rack crossbars.
CAUTION! • T o prevent damage to the roof of your vehicle, do not carry any loads on the roof rack without the crossbars installed. The load should be secured and placed on top of the crossbars, not directly on the roof.
.
UNDERST ANDING YOUR INSTRUMENT P ANEL CONTENTS 䡵 Instrument Panel Featur es ............... 2 4 2 䡵 Instrument Cluster .................... 2 4 3 䡵 Instrument Cluster Descriptions ........... 2 4 4 䡵 Electronic V ehicle Information Center (EVIC) .
▫ Compass / T emperature Display ......... 2 7 3 ▫ Customer-Pr ogrammable Features (System Setup) ...................... 2 7 6 䡵 Media Center 730N/430/430N (RHR/RER/ RBZ/RHB) CD/DVD/HDD/NA V — If Equipped .......................... 2 8 4 ▫ Operating Instructions (V oice Command System) — If Equipped .
䡵 iPod 威 /MP3 Control — If Equipped ......... 3 0 9 ▫ Connecting The iPod 威 Or External USB Device ............................ 3 1 0 ▫ Using This Feature ................... 3 1 1 ▫ Controlling The iPod 威 Or External USB Device Using Radio Buttons .
INSTRUMENT P ANEL FEA TURES 1 — Air Outlet 5 — Climate Controls 9 — Fuel Door Release 2 — Instrument Cluster 6 — Lower Switch Bank 10 — Headlight Switch 3 — Radio 7 — Storage Bin 1 1 .
INSTRUMENT CLUSTER 4 UNDERST ANDING YOUR INSTRUMENT P ANEL 243.
INSTRUMENT CLUSTER DESCRIPTIONS 1. T achometer Indicates the engine speed in revolutions per minute (RPM x 1000). 2. Airbag W arning Light This light will turn on for four to eight seconds as a bulb check when the ignition switch is first turned to the ON/RUN position.
W ARNING! A malfunctioning catalytic converter , as referenced above, can reach higher temperatures than in normal operating conditions. This can cause a fire if you drive slowly or park over flammable substances such as dry plants or wood or cardboard, etc.
5. TOW/HAUL Indicator Light — If Equipped This light will illuminate when the TOW/ HAUL button has been selected. The T OW/ HAUL button is located in the center of the instrument panel (below the climate contr ols). 6. T urn Signal Indicator The arrows will flash with the exterior turn signals when the turn signal lever is operated.
as it was before the r epair or service. If s/he cannot do so, then the odometer must be set at zero, and a sticker must be placed in the door jamb stating what the mileage was before the r epair or service.
Please note that the TPMS is not a substitute for proper tire maintenance, and it is the driver ’s responsibility to maintain correct tir e pressur e, even if under-inflation has not reached the level to trigger illumination of the TPMS low tire pr essure telltale.
12. Position Light Indicator — If Equipped This indicator will illuminate when the park lights or headlights are turned on. 13. Seat Belt Reminder Light When the ignition switch is first turned to the ON/RUN position, this light will turn on for four to eight seconds as a bulb check.
The dual brake system provides a r eserve braking capac- ity in the event of a failure to a portion of the hydraulic system. A leak in either half of the dual brake system is indicated by the Brake W arning Light, which will turn on when the brake fluid level in the master cylinder has dropped below a specified level.
The light also will turn on when the parking brake is applied with the ignition switch in the ON/RUN posi- tion. NOTE: This light shows only that the parking brake is applied. It does not show the degree of brake application. 15. Anti-Lock Brake (ABS) Light This light monitors the Anti-Lock Brake System (ABS).
18. Fuel Door Reminder The fuel pump symbol points to the side of the vehicle where the fuel door is located. 19. Fuel Gauge The pointer shows the level of fuel in the fuel tank when the ignition switch is in the ON/RUN position.
25. T emperature Gauge The temperature gauge shows engine coolant tempera- ture. Any r eading within the normal range indicates that the engine cooling system is operating satisfactorily . The gauge pointer will likely indicate a higher tempera- ture when driving in hot weather , up mountain grades, or when towing a trailer .
ELECTRONIC VEHICLE INFORMA TION CENTER (EVIC) The Electronic V ehicle Information Center (EVIC) fea- tures a driver -interactive display that is located in the instrument cluster .
The system allows the driver to select information by pressing the following buttons mounted on the steering wheel: UP Button Press and r elease the UP button to scr oll up- ward thr ough the main menus (Fuel Economy , V ehicle Info, T ire PSI, Cr uise, Messages, Units, System Setup) and sub menus.
BACK Button Press the BACK button to scr oll back to a previous menu or sub menu. Electronic V ehicle Information Center (EVIC) Displays When the appropriate conditions exist, the EVIC displays the fo.
• Adaptive Cruise Of f — When the Adaptive Cr uise Control (ACC) system is turned of f. Refer to “Adap- tive Cruise Contr ol (ACC)” in “Understanding The Features Of Y our V ehicle” (if equipped). • ACC Ready — When the ACC system is activated.
• Clean Radar Sensor in the Front of V ehicle — If the ACC system deactivates due to performance limiting conditions. Refer to “Adaptive Cruise Contr ol (ACC)” in “Understanding The Features Of Y our V ehicle” (if equipped).
• Remote start disabled — System fault • Remote start disabled — T urn key • Remote start active — Key to Run • Memory 1 profile set • Memory 2 profile set • Memory system unavailabl.
• Sport Not A vailable in 4 Low 4 High is Required • Rock Not A vailable in 4 Low 4 High is Required • T o T ow V ehicle Safely , Read Neutral Shift Procedure in Owners Manual • For 4x4 Low Sl.
• Service Air Suspension System — This is displayed when a fault has occurred in the system. The system will have limited operation at that point. • Immediate Air Suspension Service/Repair Required — This is displayed when a fault has occurred in the system which results in a complete system shutdown.
EVIC White T elltale Lights This area will show r econfigurable white caution tell- tales. These telltales include: • Shift Lever Status The shift lever status “P ,R,N,D,L,5,4,3,2,1” are displayed indicating the shift lever position.
• Power Steering System Over T emperature — If Equipped If the “POWER STEERING SYSTEM OVER TEMP” message and a icon are displayed on the EVIC screen, it indicates that extr eme steering maneuvers may have occurred, which caused an over temperature condition in the power steering system.
• Air Suspension Down The air suspension down telltale will illumi- nate when the air suspension is in use. For further information, refer to “Starting And Op- erating”. • Low Fuel Light When the fuel level reaches appr oximately 3.0 gal (1 1.
EVIC Red T elltale Lights This area will show r econfigurable red telltales. These telltales include: • Door Ajar This light will turn on to indicate that one or more door may be ajar . • Liftgate Ajar This light will turn on to indicate that liftgate may be ajar .
vehicle is experiencing a problem with the char ging system. Obtain SER VICE IMMEDIA TEL Y . See an autho- rized dealer . If jump starting is requir ed, refer to “Jump Starting Procedur es” in “What T o Do In Emergencies”.
shift the transmission into NEUTRAL and idle the ve- hicle. If the temperature r eading does not return to normal, turn the engine off immediately and call for service. Refer to “If Y our Engine Overheats” in “What T o Do In Emergencies” for mor e information.
Engine Oil Change Indicator System Oil Change Due Y our vehicle is equipped with an engine oil change indicator system. The “Oil Change Due” message will flash in the EVIC display for approximately 10 seconds after a single chime has sounded, to indicate the next scheduled oil change interval.
Press the UP/DOWN buttons to cycle thr ough all the T rip Computer functions. The T rip Functions mode displays the following informa- tion: A verage Fuel Economy / Fuel Saver Mode — If Equipped Shows the average fuel economy since the last reset. When the fuel economy is reset, the display will r ead “RESET” or show dashes for two seconds.
Distance T o Empty (DTE) Shows the estimated distance that can be traveled with the fuel remaining in the tank. This estimated distance is determined by a weighted average of the instantaneous and average fuel economy , according to the current fuel tank level.
• Elapsed T ime Press the UP/DOWN buttons to cycle thr ough all the T rip Computer functions. The T rip Functions mode displays the following informa- tion: T rip A Shows the total distance traveled for T rip A since the last reset. T rip B Shows the total distance traveled for T rip B since the last reset.
V ehicle Info (Customer Information Features) Press and r elease the UP or DOWN button until “SYS- TEM” displays in the EVIC and press the SELECT button. Press the UP and DOWN button to scroll through the available information displays, then press SELECT to display anyone of the following choices.
NOTE: • T ir es heat up during normal driving conditions. Heat will cause the tire pr essure to incr ease from 2 to 6 psi (14 to 41 kPa) during normal driving conditions. Refer to “T ir es-General Information/T ire Inflation Pr essures” in “Starting And Operating” for additional informa- tion.
NOTE: The system will display the last known outside temperature when starting the vehicle and may need to be driven several minutes before the updated tempera- ture is displayed. Engine temperatur e can also affect the displayed temperature, ther efore temperatur e readings are not updated when the vehicle is not moving.
5. Complete one or more 360–degr ee turns (in an area free fr om large metal or metallic objects) until the “CAL” indicator turns off. The compass will now function normally . Compass V ariance Compass V ariance is the differ ence between Magnetic North and Geographic North.
3. Press the DOWN button until the “Compass V ariance” message is displayed in the EVIC, then press the SELECT button. The last variance zone number displays in the EVIC. 4. Press and r elease the SELECT button until the proper variance zone is selected, according to the map.
Auto Lock Doors When this feature is selected, all doors will lock auto- matically when the vehicle reaches a speed of 15 mph (24 km/h). T o make your selection, press and r elease the SELECT button u.
grasped. W ith Passive Entry , if Driver Door 1st Press is programmed touching the handle mor e than once will only result in the driver ’s door opening. If driver door first is selected, once the driver door is opened, the interior door lock/unlock switch can be used to unlock all doors (or use RKE transmitter).
Horn with Remote Lock When this feature is selected, a short horn sound will occur when the RKE transmitter LOCK button is pressed. This feature may be selected with or without the “Flash Lamps with Lock” feature.
Headlamps with W ipers (A vailable with Automatic Headlamps Only) When this feature is selected, and the headlight switch is in the AUTO position, the headlights will turn on ap- proximately 10 seconds after the wipers ar e turned on. The headlights will also turn off when the wipers ar e turned off if they wer e turned on by this feature.
REVERSE position. The mirrors will move back to their previous position when the transmission is shifted out of REVERSE. T o make your selection, press and r elease the SELECT button until a check-mark appears next to the feature showing the system has been activated or the check-mark is removed, showing the system has been deactivated.
next to the feature showing the system has been activated or the check-mark is removed, showing the system has been deactivated. Refer to “Keyless Enter-N-Go” in “Things T o Know Before Starting Y our V ehicle”.
Blind Spot Alert There ar e three selections when operating Blind Spot Alert. By pressing and r eleasing the SELECT button once, the Blind Spot Alert feature can be activated in “Blind Spot: Lights Only” mode. When this mode is selected the Blind Spot Monitor (BSM) system is activated and will only show a visual alert in the outside mirrors.
Display Units of Measure In: The EVIC, odometer , and Uconnect™ gps (if equipped) can be changed between English and Metric units of measure. T o make your selection, press and release the SELECT button until “ENGLISH” or “METRIC” appears. Calibrate Compass Refer to “Compass Display” for more information.
Operating Instructions — Radio Mode NOTE: The ignition switch must be in the ON or ACC position to operate the radio. Power Switch/V olume Control (Rotary) Push the ON/VOLUME control knob to turn on the radio. Push the ON/VOLUME control knob a second time to turn off the radio.
TIME Button Press the TIME button to alternate display of the time and radio frequency . Clock Setting Procedure 1. Press and hold the TIME button until the hours blink. 2. Adjust the hours by turning the right side TUNE/ SCROLL control knob. 3. After adjusting the hours, press the right side TUNE/ SCROLL control knob to set the minutes.
Push the rotary TUNE/SCROLL control knob a thir d time and TREBLE will display . T urn the TUNE/SCROLL control knob to the right or left to incr ease or decrease the treble tones. Push the rotary TUNE/SCROLL control knob a fourth time and BALANCE will display .
Every time a preset button is used, a corr esponding button number will display . Button s1-6 These buttons tune the radio to the stations that you commit to pushbutton memory (12 AM and 12 FM stations). DISC Button Pressing the DISC button will allow you to switch fr om AM/FM modes to Disc modes.
CAUTION! • This CD player will accept 4-3/4 in (12 cm) discs only . The use of other sized discs may damage the CD player mechanism. • Do not use adhesive labels. These labels can peel away and jam the player mechanism. • RES is a single CD player .
R W/FF Press and hold the FF (Fast Forwar d) button and the CD player will begin to fast forward until FF is r eleased, or R W or another CD button is pressed. The R W (Reverse) button works in a similar manner . AM/FM Button Press the button to select either AM or FM mode.
• Maximum number of files: 255 • Maximum number of folders. (The radio display of file names and folder names is limited. For large numbers of files and/or folders, the radio may be unable to display the file name and folder name, and will assign a number instead.
MPEG Specification Sampling Fre- quency (kHz) Bit Rate (kbps) MPEG-1 Audio Layer 3 48, 44.1, 32 320, 256, 224, 192, 160, 128, 1 12, 96, 80, 64, 56, 48, 40, 32 MPEG-2 Audio Layer 3 24, 22.
Operation Instructions - Auxiliary Mode The auxiliary (AUX) jack is an audio input jack, which allows the user to plug in a portable device, such as an MP3 player , or cassette player , and utilize the vehicle’s audio system to amplify the source and play thr ough the vehicle speakers.
Operating Instructions — Radio Mode NOTE: The ignition switch must be in the ON/RUN or ACC position to operate the radio. Power Switch/V olume Control (Rotary) Push the ON/VOLUME control knob to turn on the radio. Push the ON/VOLUME control knob a second time to turn off the radio.
Phone Button Uconnect™ Phone — If Equipped Press this button to operate the Uconnect™ Phone featur e (if equipped). Refer to “Uconnect™ Phone” in the Uconnect™ User Manual located on the DVD for further details.
INFO Button Press the INFO button for an RDS station (one with call letters displayed). The radio will return a Radio T ext message broadcast fr om an FM station (FM mode only). R W/FF Pressing the R W (Rewind) or FF (Fast Forwar d) buttons causes the tuner to search for the next fr equency in the direction of the arr ows.
MUSIC TYPE Button Pressing this button once will turn on the Music T ype mode for five seconds. Pressing the MUSIC TYPE button or turning the TUNE/SCROLL control knob within five seconds will allow the program format type to be se- lected. Many radio stations do not currently br oadcast Music T ype information.
Program T ype 16-Digit Character Display T op 40 T op 40 W eather W eather By pressing the SEEK button when the Music T ype icon is displayed, the radio will be tuned to the next frequency station with the same selected Music T ype name. The Music T ype function only operates when in the FM mode.
Y ou may add a second station to each pushbutton by repeating the above pr ocedure with this exception: Pr ess the SET/RND button twice and SET 2 will show in the display window . Each button can be set for SET 1 and SET 2 in both AM and FM. This allows a total of 12 AM and 12 FM stations to be stored into pushbutton memory .
If you insert a disc with the ignition ON/RUN and the radio ON, the unit will switch from radio to CD mode and begin to play when you insert the disc. The display will show the track number , and index time in minutes and seconds. Play will begin at the start of track 1.
SEEK Button Press the right SEEK button for the next selection on the CD. Press the left SEEK button to r eturn to the beginning of the current selection, or r eturn to the beginning of the previous selection if the CD is within the first second of the current selection.
Supported Medium Formats (File Systems) The medium formats supported by the radio are ISO 9660 Level 1 and Level 2 and includes the Joliet extension. When reading discs r ecorded using formats other than ISO 9660 Level 1 and Level 2, the radio may fail to read files properly and may be unable to play the file nor - mally .
When using the MP3 encoder to compress audio data to an MP3 file, the bit rate and sampling frequencies in the following table are supported. In addition, variable bit rates (VBR) are also supported. The majority of MP3 files use a 44.1 kHz sampling rate and a 192, 160, 128, 96 or VBR bit rates.
T o increase the speed of disc loading, it is r ecommended to use CD-R media and single-session discs. T o create a single-session disc, enable the “Disc at Once” option before writing to the disc. LIST Button (CD Mode for MP3 Play) Pressing the LIST button will bring up a list of all folders on the disc.
is not loud enough, turn the device’s volume up. If the AUX audio sounds distorted, turn the device’s volume down. TIME Button (Auxiliary Mode) Press this button to change the display to time of day . The time of day will display for five seconds (when the ignition is OFF).
T o access the ESN/SID, refer to the following steps: ESN/SID Access W ith the ignition switch in the ON/RUN or ACC posi- tion and the radio on, press the SETUP button and scroll using the TUNE/SCROLL control knob until Sirius ID is selected. Press the TUNE/SCROLL contr ol knob and the Sirius ID number will display .
Operating Instructions - Uconnect™ Multimedia (Satellite) Mode NOTE: The ignition switch must be in the ON/RUN or ACC position to operate the radio. SEEK Buttons Press and r elease the SEEK buttons to search for the next channel in Satellite mode. Press the right switch to seek up and the left switch to seek down.
MUSIC TYPE Button Pressing this button once will turn on the Music T ype mode for five seconds. Pressing the MUSIC TYPE button or turning the TUNE/SCROLL control knob within five seconds will allow the program format type to be se- lected. T oggle the MUSIC TYPE button again to select the music type.
Y ou may add a second channel to each pushbutton by repeating the above pr ocedure with this exception: Pr ess the SET button twice and SET 2 will show in the display window . Each button can be set for SET 1 and SET 2. This allows a total of 12 Satellite channels to be stored into pushbutton memory .
NOTE: • If the radio has a USB port, refer to the appr opriate Uconnect™ Multimedia radio User ’s Manual for iPod 威 or external USB device support capability .
Once the audio device is connected and synchronized to the vehicle’s iPod 威 /MP3 control system (iPod 威 or exter - nal USB device may take a few minutes to connect), the audio device starts charging and is r eady for use by pressing radio switches, as described below .
Play Mode When switched to iPod 威 /MP3 control mode, the iPod 威 or external USB device automatically starts Play mode. In Play mode, the following buttons on the radio faceplate may be used to control the iPod 威 or external USB device and display data: • Use the TUNE control knob to select the next or previous track.
to the next screen of data for that track. Once all screens have been viewed, the last INFO button pr ess will go back to the play mode screen on the radio. • Pressing the REPEA T button will change the audio device mode to repeat the curr ent playing track or press the VR button and say ⬙ Repeat ON ⬙ or ⬙ Repeat Off ⬙ .
fast will scroll thr ough the list faster . During fast scroll, a slight delay in updating the information on the radio display may be noticeable. • During all List modes, the iPod 威 displays all lists in “wrap-around” mode.
CAUTION! • Leaving the iPod 威 or external USB device (or any supported device) anywhere in the vehicle in extreme heat or cold can alter the operation or damage the device.
2. After the ⬙ Ready ⬙ prompt and the following beep, say ⬙ Setup ⬙ , then ⬙ Select Audio Devices ⬙ . 3. Say name of the audio device or ask Uconnect™ phone system to list audio devices.
screen, a battery-power ed remote contr ol, and two head- sets. Refer to the “Uconnect™ Multimedia” section of Uconnect™ User Manual located on the DVD for further details.
STEERING WHEEL AUDIO CONTROLS The remote sound system contr ols are located on the r ear surface of the steering wheel. Reach behind the wheel to access the switches. The right-hand control is a r ocker-type switch with a pushbutton in the center and controls the volume and mode of the sound system.
The button located in the center of the left-hand control will tune to the next preset station that you have pr o- grammed in the radio preset pushbutton.
NOTE: If you experience difficulty in playing a particu- lar disc, it may be damaged (i.e., scratched, reflective coating removed, a hair , moisture or dew on the disc) oversized, or have protection encoding. T ry a known good disc before considering disc player service.
Blower Control Rotate this control to r egulate the amount of air forced thr ough the ven- tilation system in any mode. The blower speed increases as you move the control to the right fr om the “O” (OFF) position.
Mode Control (Air Direction) Push the mode control buttons to choose fr om several patterns of air distribution. Panel Air is directed thr ough the outlets in the instrument panel.
NOTE: • In Floor , Mix and Defrost modes a small amount of air will flow through the outboar d panel outlets for occupant comfort. • The air conditioning compressor operates in Mix, Defrost, or a blend of these modes, even if the Air Conditioning (A/C) button is not pressed.
Air Conditioning Control Press this button to engage the Air Conditioning. A light will illuminate when the Air Conditioning System is engaged. Rotating the dial left into the blue area of the scale indicates cooler temperatures while r otating right into the red ar ea indicates warmer tem- peratures.
1. A/C Button Press and r elease to change the current Air Conditioning (A/C) setting, the indicator illuminates when A/C is ON. Performing this function will cause the A TC to switch into manual mode. 2. Recirculation Contr ol Button Press and r elease to change the current setting, the indicator illuminates when ON.
will cause the A TC to switch into manual mode. The blower will engage immediately if the Defrost mode is selected. 8. Passenger T emperature Control Up Button Provides the passenger with independent temperatur e control. Push the button for warmer temperatur e set- tings.
15. Driver T emperature Control Down Button Provides the driver with independent temperatur e con- trol. Push the button for cooler temperatur e settings. 16. Driver T emperature Control Up Button Provides the driver with independent temperatur e con- trol.
Manual Operation This system offers a full complement of manual override features. NOTE: Each of these features operate independently from each other . If any one feature is contr olled manually , temperature contr ol will continue to operate automati- cally .
NOTE: In many temperature positions, the BI-LEVEL mode is designed to provide cooler air out of the panel outlets and warmer air from the floor outlets. Floor Mode Air comes from the floor outlets. A slight amount of air is directed thr ough the defrost and side window demister outlets.
NOTE: • If the system is in Mix, Floor or Defrost Mode, the A/C can be turned off, but the A/C system shall remain active to prevent fogging of the windows. • If fog or mist appears on the windshield or side glass, select Defrost mode and incr ease blower speed.
Regular cleaning of the inside of the windows with a non-filming cleaning solution (vinegar and water works very well) will help prevent contaminates (cigar ette smoke, perfumes, etc.) from sticking to the windows. Contaminates increase the rate of window fogging.
Operating Tips Chart 332 UNDERST ANDING YOUR INSTRUMENT P ANEL.
ST ARTING AND OPERA TING CONTENTS 䡵 Starting Procedur es .................... 3 3 9 ▫ Automatic T ransmission ............... 3 3 9 ▫ Keyless Enter-N-Go ................... 3 4 0 ▫ Normal Starting ..................... 3 4 1 ▫ Extreme Cold W eather (Below 20°F Or ⫺ 7°C) .
▫ Quadra-T rac II 威 Operating Instructions/ Precautions – If Equipped .............. 3 5 5 ▫ Shift Positions ...................... 3 5 6 ▫ Shifting Procedur es ................... 3 5 7 ▫ Quadra-Drive 威 II System – If Equipped .... 3 5 9 䡵 Selec-T errain™ — If Equipped .
▫ Power Steering Fluid Check ............. 3 7 5 䡵 Multi-Displacement System (MDS) (If Equipped) — 5.7L Engine Only .......... 3 7 6 䡵 Parking Brake ........................ 3 7 6 䡵 Electronic Brake Contr ol System ........... 3 7 8 ▫ Anti-Lock Brake System (ABS) .
▫ T ir e Pressures For High Speed Operation . . . 403 ▫ Radial-Ply T ir es ..................... 4 0 3 ▫ Spare T ire Matching Original Equipped T ir e And Wheel – If Equipped .............. 4 0 4 ▫ Compact Spare T ire – If Equipped .......
▫ Fuel System Cautions ................. 4 2 5 ▫ Carbon Monoxide W arnings ............ 4 2 6 䡵 Flexible Fuel (3.6L Engine Only) — If Equipped .......................... 4 2 6 ▫ E85 General Information ............... 4 2 6 ▫ Ethanol Fuel (E85) .
䡵 Snow Plow .......................... 4 5 0 䡵 Recreational T owing (Behind Motorhome, Etc.) ................ 4 5 1 ▫ T owing This V ehicle Behind Another V ehicle ................ 4 5 1 ▫ Recreational T owing — T wo-Wheel Drive Models .....
ST ARTING PROCEDURES Before starting your vehicle, adjust your seat, adjust the inside and outside mirrors, fasten your seat belt, and if present, instr uct all other occupants to buckle their seat belts. W ARNING! Never leave children alone in a vehicle.
Do not press the accelerator . Use the Fob with Integrated Key to briefly turn the ignition switch to the ST ART position and release it as soon as the starter engages. The starter motor will continue to run, and it will disengage automatically when the engine is running.
NOTE: The ENGINE ST ART/ST OP button should only be removed or inserted with the ignition in the LOCK position (OFF position for Keyless Enter-N-Go). Normal Starting Using the ENGINE ST AR T/STOP Button NOTE: Normal starting of either a cold or a warm engine is obtained without pumping or pressing the accelerator pedal.
NOTE: If the ignition switch is left in the ACC or RUN (engine not running) position and the transmission is in P ARK, the system will automatically time out after 30 minutes of inactivity and the ignition will switch to the OFF position.
If Engine Fails T o Start W ARNING! • Never pour fuel or other flammable liquids into the throttle body air inlet opening in an attempt to start the vehicle. This could result in a flash fire causing serious personal injury . • Do not attempt to push or tow your vehicle to get it started.
release it as soon as the starter engages. The starter motor will disengage automatically in 10 seconds. Once this occurs, release the accelerator pedal, turn the ignition switch to the LOCK position, wait 10 to 15 seconds, then repeat the “Normal Starting” pr ocedure.
AUTOMA TIC TRANSMISSION CAUTION! Damage to the transmission may occur if the follow- ing precautions are not observed: • Shift into P ARK only after the vehicle has come to a complete stop. • Shift into or out of REVERSE only after the vehicle has come to a complete stop and the engine is at idle speed.
Brake/T ransmission Shift Interlock System This vehicle is equipped with a Brake T ransmission Shift Interlock System (BTSI) that holds the shift lever in the P ARK position when the ignition switch is in the LOCK position.
W ARNING! • Never use the P ARK position as a substitute for the parking brake. Always apply the parking brake fully when parked to guard against vehicle movement and possible injury or damage. • It is dangerous to move the shift lever out of P ARK or NEUTRAL if the engine speed is higher than idle speed.
Electronic Range Select (ERS) Operation The Electronic Range Select (ERS) shift contr ol allows you to move the shift lever left (-) or right (+) when the shift lever is in the DRIVE position, allowing you to limit the highest available gear .
the ERS designation for the current gear (the transmis- sion will not downshift). For example, if you are in DRIVE and are in thir d (direct) gear , when you tap the shift lever one time to the left (-), the display will show 4 (ERS 4 is direct gear).
• vehicle speed is above approximately 30 mph (48 km/h); • the TOW/HAUL switch has not been activated; • transmission has reached normal operating temperature.
operating in TOW/HAUL mode, the transmission will shift into direct gear and Over drive will be enabled under steady cruise conditions. The “TOW/HAUL Indicator Light” will illuminate in the instrument cluster to indicate when the switch has been activated.
T o reset the transmission, use the following pr ocedure: 1. Stop the vehicle. 2. Move the shift lever into the P ARK position. 3. T urn the engine off, and be sur e to turn the ignition switch to the LOCK position. 4. W ait approximately 10 seconds, then r estart the en- gine.
gear) positions will demonstrate that the transmission is able to shift into and out of Overdrive. For vehicles with 5.7L engines (which have two Overdrive gears), the transmission may not shift into the top Overdrive gear (normal fifth gear) until the transmission fluid and engine coolant are warm.
The least amount of accelerator pedal pressur e to main- tain the rocking motion, without spinning the wheels or racing the engine, is most effective. Racing the engine or spinning the wheels may lead to transmission overheat- ing and failure.
Quadra-T rac II 姞 Operating Instructions/ Precautions – If Equipped The Quadra-T rac II 威 transfer case is fully automatic in the normal driving 4WD AUTO mode. The Quadra-T rac II 威 transfer case provides thr ee mode positions: • 4WD HI • NEUTRAL • 4WD LOW This transfer case is fully automatic in the 4WD HI mode.
Proper operation of four -wheel drive vehicles depends on tires of equal size, type, and cir cumference on each wheel. Any differ ence will adversely affect shifting and cause damage to the transfer case. Because four-wheel drive pr ovides improved traction, there is a tendency to exceed safe turning and stopping speeds.
and rear wheels to r otate at the same speed. It provides additional traction and maximum pulling power for loose, slippery road surfaces only . Do not exceed 25 mph (40 km/h). NOTE: Refer to “Selec-T errain 威 – If Equipped” for further information on the various positions and their intended usages.
4WD LOW to 4WD HI W ith the vehicle at speeds of 0 to 3 mph (0 to 5 km/h), the ignition switch in the ON position or the engine running, shift the transmission into NEUTRAL, and press the “4WD LOW” button once on the transfer case switch.
the Electronic V ehicle Information Center (EVIC). Refer to “Electronic V ehicle Information Center (EVIC)” in “Understanding Y our Instrument Panel” for further in- formation.
case and axle coupling differ in design, their operation is similar . Follow the Quadra-T rac II 威 transfer case shifting information, preceding this section, for shifting this system.
to allow more driver contr ol of vehicle while maintain- ing safe handling controls. The vehicle will lower (if equipped with Air Suspension) to Aero Mode in High Range. 4WD Low is not available in SPOR T mode, if 4WD Low is selected the Selec-T errain™ will auto- matically switch back to AUTO.
equipped with air suspension, the vehicle level will change to Off-Road 2. If the Selec-T errain™ switch is in ROCK mode, and the transfer case is switched from 4WD Low to 4WD High, the Selec-T errain™ system will return to AUTO.
• Off-Road 1 (OR1) (Raises the vehicle approximately 1.3 in (33 mm) – This position should be the default position for all off-r oad driving until OR2 is needed. A smoother and more comfortable ride will r esult. Press the “Up” button once from the NRH position while the vehicle speed is below 48 mph (77 km/h).
• Park Mode (Lowers the vehicle approximately 1.5 in (38 mm) – This position lowers the vehicle for easier passenger entry and exit as well as lowering the rear of the vehicle for easier loading and unloading of cargo. T o enter Park Mode, press the “Down” button once while the vehicle speed is below 25 mph (40 km/h).
T o assist with changing a spare tir e, the Quadra-Lift™ air suspension system has a feature which allows the auto- matic leveling to be disabled. Press and hold both the “Up” and “Down” but.
Pressing the “UP” button once will move the suspension one position higher from the curr ent position, assuming all conditions are met (i.e. engine r unning, speed below threshold, etc).
• Park Mode – Indicator lamp 3 will be illuminated when the vehicle is in Park Mode. If Park Mode is requested while vehicle speed is between 15 mph (24 km/h) and 25 mph (40 km/h), indicator lamp 4 will remain on solid and indicator lamp 3 will flash as the system waits for the vehicle to reduce speed.
OFF-ROAD DRIVING TIPS NOTE: Prior to off-r oad driving, remove the fr ont air dam to prevent damage. The fr ont air dam is attached to the lower front fascia with seven quarter turn fasteners and can be removed by hand.
Driving Through W ater Although your vehicle is capable of driving through water , there are a number of pr ecautions that must be considered befor e entering the water . NOTE: Y our vehicle is capable of water fording in up to 20 inches (51 cm) of water , while crossing small rivers or streams.
Standing W ater A void driving in standing water deeper than 20 inches (51 cm), and reduce speed appr opriately to minimize wave effects. Maximum speed in 20 inches (51 cm) of water is less than 5 mph (8 km/h).
regulate your speed. If the brakes ar e requir ed to control vehicle speed, apply them lightly and avoid locking or skidding the tires. W ARNING! If the engine stalls, you lose forward motion, or cannot make it to the top of a steep hill or grade, never attempt to turn around.
• Completely inspect the underbody of your vehicle. Check tires, body str ucture, steering, suspension, and exhaust system for damage. • Inspect the radiator for mud and debris and clean as requir ed. • Check threaded fasteners for looseness, particularly on the chassis, drivetrain components, steering, and sus- pension.
and increased ease of maneuverability in tight spaces. The system will vary its assist to provide light ef forts while parking and good feel while driving. If the electro- hydraulic power steering system experiences a fault that prevents it fr om providing power steering assist, then the system will provide mechanical steering capability .
• If the condition persists, see your authorized dealer for service. 5.7L Engine The standard power steering system will give you good vehicle response and incr eased ease of maneuverability in tight spaces. The system will provide mechanical steering capability if power assist is lost.
Power Steering Fluid Check Checking the power steering fluid level at a defined service interval is not requir ed. The fluid should only be checked if a leak is suspected, abnormal noises are apparent, and/or the system is not functioning as antici- pated.
MUL TI-DISPLACEMENT SYSTEM (MDS) (IF EQUIPPED) — 5.7L ENGINE ONL Y This feature of fers improved fuel economy by shutting off four of the engine’s eight cylinders during light load and cruise conditions. The system is automatic with no driver inputs or additional driving skills requir ed.
NOTE: • When the parking brake is applied and the transmis- sion is placed in gear , the “Brake W arning Light” will flash. If vehicle speed is detected, a chime will sound to alert the driver . Fully release the parking brake before attempting to move the vehicle.
W ARNING! (Continued) • Always fully apply the parking brake when leav- ing your vehicle, or it may roll and cause damage or injury . Also be certain to leave the transmission in P ARK. Failure to do so may allow the vehicle to roll and cause damage or injury .
W ARNING! The ABS cannot prevent the natural laws of physics from acting on the vehicle, nor can it increase the traction afforded by prevailing road conditions. The ABS cannot prevent collisions, including those re- sulting from excessive speed in turns, driving on very slippery surfaces, or hydroplaning.
benefit of the system, you must apply continuous brak- ing pressur e during the stopping sequence (do not “pump” the brakes). Do not reduce brake pedal pr essure unless braking is no longer desired. Once the brake pedal is released, the BAS is deactivated.
W ARNING! Many factors, such as vehicle loading, road condi- tions and driving conditions, influence the chance that wheel lift or rollover may occur . ERM cannot prevent all wheel lift or rollovers, especially those that involve leaving the roadway or striking objects or other vehicles.
as little throttle as possible. Be sur e to adapt your speed and driving to the prevailing r oad conditions. W ARNING! The Electronic Stability Control (ESC) cannot pre- vent the natural laws of physics from acting on the vehicle, nor can it increase the traction afforded by prevailing road conditions.
to be used if the vehicle is in deep snow , sand, or gravel conditions and more wheel spin than ESC would nor - mally allow is requir ed to gain traction. T o turn ESC on again, momentarily press the “ESC OFF” switch. This will restor e the normal “ESC On” mode of operation.
T railer Sway Control (TSC) TSC uses sensors in the vehicle to recognize an exces- sively swaying trailer and will take the appropriate actions to attempt to stop the sway . The system may reduce engine power and apply the brake of the appr o- priate wheel(s) to counteract the sway of the trailer .
HSA Activation Criteria The following criteria must be met in order for HSA to activate: • V ehicle must be stopped. • V ehicle must be on a 6% (approximate) grade or greater hill. • Gear selection matches vehicle uphill direction (i.e., vehicle facing uphill is in forward gear; vehicle back- ing uphill is in REVERSE gear).
T owing W ith HSA HSA will provide assistance when starting on a grade when pulling a trailer . W ARNING! • If you use a trailer brake controller with your trailer , your trailer brakes may be activated and deactivated with the brake switch.
Ready Alert Braking – If Equipped Ready Alert Braking may reduce the time requir ed to reach full braking during emer gency braking situations. It anticipates when an emergency braking situation may occur by monitoring how fast the throttle is r eleased by the driver .
When HDC is enabled, the HDC icon will be illuminated in the instrument cluster . HDC will automatically apply the brakes to control downhill speed to the selected level when necessary on grades greater than appr oximately 8%. It will usually not activate on level ground.
• P ARK = HDC will not function HDC is intended for low speed off-road driving only . At vehicle speeds above 20 mph (32 km/h), HDC will no longer function. When the vehicle speed drops below 20 mph (32 km/h), HDC function will automatically resume and the vehicle speed will r eturn to the chosen set speed.
Malfunction Indicator Light” begins to flash during ac- celeration, ease up on the accelerator and apply as little throttle as possible. Be sur e to adapt your speed and driving to the prevailing r oad conditions.
NOTE: • P (Passenger) - Metric tir e sizing is based on U.S. design standards. P-Metric tir es have the letter “P” molded into the sidewall preceding the size designa- tion. Example: P215/65R15 95H. • European-Metric tir e sizing is based on European design standards.
T ire Sizing Chart EXAMPLE: Size Designation: P = Passenger car tire size based on U.S. design standar ds ⴖ ....blank.... ⴖ = Passenger car tire based on Eur opean design standards LT = Light truck tir e based on U.
EXAMPLE: Service Description: 95 = Load Index — A numerical code associated with the maximum load a tire can carry H = Speed Symbol — A symbol indicating the range of speeds at which a tire can ca.
Tire Identification Number (TIN) The TIN may be found on one or both sides of the tire, however , the date code may only be on one side. T ires with white sidewalls will have the full TIN, including the date code, located on the white sidewall side of the tire.
Tire T erminology and Definitions T erm Definition B-Pillar The vehicle B-Pillar is a structural member of the body located between the front and r ear door (of a four-door vehicle) running from the sill to the r oof.
Tire Loading And Tire Pressure T ire Placard Location NOTE: The proper cold tir e inflation pressur e is listed on the driver’s side B-Pillar . T ire and Loading Information Placard T ire Placard Lo.
This placard tells you important information about the: 1) number of people that can be carried in the vehicle 2) total weight your vehicle can carry 3) tire size designed for your vehicle 4) cold tire inflation pr essures for the fr ont, rear , and spare tir es.
3. Subtract the combined weight of the driver and pas- sengers from XXX lbs or XXX kg. 4. The resulting figur e equals the available amount of cargo and luggage load capacity .
ST ARTING AND OPERA TING 399.
W ARNING! Overloading of your tires is dangerous. Overloading can cause tire failure, affect vehicle handling, and increase your stopping distance. Use tires of the recommended load capacity for your vehicle.
W ARNING! (Continued) • Unequal tire pressures from one side of the ve- hicle to the other can cause the vehicle to drift to the right or left. • Always drive with each tire inflated to the recom- mended cold tire inflation pressure. Economy Improper inflation pr essures can cause uneven wear patterns to develop across the tir e tread.
CAUTION! After inspecting or adjusting the tire pressure, al- ways reinstall the valve stem cap. This will prevent moisture and dirt from entering the valve stem, which could damage it. Inflation pressur es specified on the placard ar e always cold tire inflation pr essure.
Tire Pressures For High Speed Operation The manufacturer advocates driving at safe speeds within posted speed limits. Where speed limits or condi- tions are such that the vehicle can be driven at high speeds, maintaining correct tir e inflation pressur e is very important.
Spare Tire Matching Original Equipped T ire and Wheel – If Equipped The spare tir e of your vehicle is equivalent in look and function as the original equipment tire and wheel found on the front or r ear axle of your vehicle. This spare tir e may be used in the tire r otation for your vehicle.
Since this tire has limited tr ead life the original equip- ment tire should be r epaired (or r eplaced) and reinstalled on your vehicle at the first opportunity . Do not install a wheel cover or attempt to mount a conventional tire on the compact spar e wheel, since the wheel is designed specifically for the compact spare.
your original equipment tire, r eplace (or repair) the original equipment tire and r einstall on the vehicle at the first opportunity . W ARNING! Limited-use spares are for emergency use only . In- stallation of this limited-use spare tire affects vehicle handling.
T read W ear Indicators T read wear indicators ar e in the original equipment tires to help you in determining when your tires should be replaced. These indicators are molded into the bottom of the tr ead grooves. They will appear as bands when the tr ead depth becomes 1/16 in (2 mm).
W ARNING! T ires and the spare tire should be replaced after six years, regardless of the remaining tread. Failure to follow this warning can result in sudden tire failure. Y ou could lose control and have an collision resulting in serious injury or death.
W ARNING! • Do not use a tire, wheel size or rating other than that specified for your vehicle. Some combinations of unapproved tires and wheels may change sus- pension dimensions and performance characteris- tics, resulting in changes to steering, handling, and braking of your vehicle.
• Due to limited clearance, use SAE class “S” low profile cables or traction devices only . Security Chain Com- pany (SCC) Super Z6 #SZ 441 cables or equivalent are recommended. W ARNING! Using tires of different size and type (M+S, Snow) between front and rear axles can cause unpredictable handling.
CAUTION! (Continued) • Observe the traction device manufacturer ’ s in- structions on the method of installation, operating speed, and conditions for use. Always use the suggested operating speed of the device manufac- turer ’ s if it is less than 30 mph (48 km/h).
These effects can be r educed by timely rotation of tir es. The benefits of rotation ar e especially worthwhile with aggressive tr ead designs such as those on On/Off-Road type tires. Rotation will incr ease tread life, help to main- tain mud, snow , and wet traction levels, and contribute to a smooth, quiet ride.
the outside temperature decr eases, the tire pr essure will decrease. T ire pressur e should always be set based on cold inflation tire pr essure. This is defined as the tir e pressur e after the vehicle has not been driven for at least three hours, or driven less than 1 mile (1.
be ON. In this situation, the T ir e Pressure Monitoring T elltale Light will turn OFF only after the tires have been inflated to the vehicle’s recommended cold tir e pressur e value. CAUTION! • The TPMS has been optimized for the original equipment tires and wheels.
• The TPMS is not a substitute for proper tir e mainte- nance, and it is the driver ’s responsibility to maintain correct tir e pressur e using an accurate tire gauge, even if under-inflation has not r eached the level to trigger illumination of the T ir e Pressure Monitoring T elltale Light.
will automatically update and the T ir e Pressure Monitor - ing T elltale Light will extinguish, once the updated tire pressur es have been received. The vehicle may need to be driven for up to 20 minutes above 15 mph (24 km/h) to receive this information.
on solid. In addition, a “SER VICE TPM SYSTEM” mes- sage will be displayed for 75 seconds. For each subse- quent ignition switch cycle, a chime will sound, a “SER- VICE TPM SYSTEM” message will be displayed for 75 seconds, and the T ir e Pressure Monitoring T elltale Light will flash on and off for 75 seconds and then r emain on solid.
• T ir e Pressure Monitoring T elltale Light T ire Pressure Monitoring Low Pressure W arnings The T ir e Pressure Monitoring T elltale Light will illuminate in the instrument cluster , and an au- dible chime will be activated, when one or more of the four active road tir e pressur es are low .
Should a low tire condition occur on any of the four active road tir e(s), you should stop as soon as possible, and inflate the low tire(s) that is “flashing” on the graphic display to the vehicle’s recommended cold tir e pressur e.
message will not be present, and a pr essure value will be displayed instead of dashes. A system fault can occur by any of the following: 1. Jamming due to electronic devices or driving next to facilities emitting the same Radio Frequencies as the TPM sensors.
the EVIC will display a “SER VICE TPM SYSTEM ⬙ mes- sage for three seconds and then display dashes (- -) in place of the pressur e value. For each subsequent ignition switch cycle, a chime will so.
FUEL REQUIREMENTS 3.6L Engine This engine is designed to meet all emis- sions regulations and pr ovide excellent fuel economy and performance when us- ing high-quality unleaded “regular” gaso- line having an octane rating of 87.
Reformulated Gasoline Many areas of the country r equire the use of cleaner burning gasoline referr ed to as “Reformulated Gasoline.” Reformulated gasoline contains oxygenates and are spe- cifically blended to reduce vehicle emissions and im- prove air quality .
If a Non-FFV vehicle is inadvertently fueled with E85 fuel, the engine will have some or all of these symptoms: • operate in a lean mode • OBD II “Malfunction Indicator Light” on • poor engi.
Materials Added to Fuel All gasoline sold in the United States is requir ed to contain effective deter gent additives. Use of additional detergents or other additives is not needed under normal conditions and they would result in additional cost. Therefor e, you should not have to add anything to the fuel.
Carbon Monoxide W arnings W ARNING! Carbon monoxide (CO) in exhaust gases is deadly . Follow the precautions below to prevent carbon monoxide poisoning: • Do not inhale exhaust gases. They contain carbon monoxide, a colorless and odorless gas, which can kill.
the other sections of this manual for information on features that ar e common between Flexible Fuel and gasoline-only powered vehicles. CAUTION! Only vehicles with the E85 fuel filler door label can operate on E85.
Ethanol Fuel (E85) E85 is a mixture of appr oximately 85% fuel ethanol and 15% unleaded gasoline. W ARNING! Ethanol vapors are extremely flammable and could cause serious personal injury . Never have any smok- ing materials lit in or near the vehicle when remov- ing the fuel filler tube cap (gas cap) or filling the tank.
• Some additives used in regular gasoline ar e not fully compatible with E85 and may form deposits in your engine. T o eliminate driveability issues that may be caused by these deposits, a supplemental gasoline additive, such as MOP AR 威 Injector Cleanup or T echron may be used.
Replacement Parts Many components in your Flexible Fuel V ehicle (FFV) are designed to be compatible with ethanol. Always be sure that your vehicle is serviced with correct ethanol com- patible parts. CAUTION! Replacing fuel system components with non-ethanol compatible components can damage your vehicle.
2. Open the fuel filler door , and remove the fuel filler cap. Fuel Filler Door Release Switch Fuel Filler Cap 5 ST ARTING AND OPERA TING 431.
CAUTION! • Damage to the fuel system or emission control system could result from using an improper fuel cap (gas cap). A poorly fitting cap could let impu- rities into the fuel system. Also, a poorly fitting aftermarket cap can cause the “Malfunction Indi- cator Light (MIL)” to illuminate, due to fuel vapors escaping from the system.
NOTE: • When the fuel nozzle “clicks” or shuts off, the fuel tank is full. • T ighten the gas cap about one-quarter turn until you hear one click. This is an indication that the cap is properly tightened. • If the gas cap is not tighten properly , the MIL will come on.
Rating (GA WR) front and rear , and V ehicle Identification Number (VIN). A Month-Day-Hour (MDH) number is included on this label and indicates the month, day , and hour of manufacture. The bar code that appears on the bottom of the label is your VIN.
Inflation Pressure This is the cold tire inflation pr essure for your vehicle for all loading conditions up to full GA WR. Curb W eight The curb weight of a vehicle is defined as the total weight of the vehicle with all fluids, including vehicle fuel, at full capacity conditions, and with no occupants or cargo loaded into the vehicle.
CAUTION! Do not load your vehicle any heavier than the GVWR or the maximum front and rear GA WR. If you do, parts on your vehicle can break, or it can change the way your vehicle handles. This could cause you to lose control. Also, overloading can shorten the life of your vehicle.
W ARNING! If the gross trailer weight is 3,500 lbs (1 587 kg) or more, it is mandatory to use a weight-distributing hitch to ensure stable handling of your vehicle. If you use a standard weight-carrying hitch, you could lose control of your vehicle and cause a collision.
T railer T ongue W eight (TW) The TW is the downward for ce exerted on the hitch ball by the trailer . In most cases it should not be less than 10% or more than 15% of the trailer load.
W ARNING! • An improperly adjusted weight-distributing hitch system may reduce handling, stability , and brak- ing performance, and could result in a collision.
W ith W eight-Distributing Hitch (Correct) Improper Adjustment of W eight-Distributing Hitch (Incorrect) 440 ST ARTING AND OPERA TING.
T railer Hitch Classification Y our vehicle may be factory equipped for safe towing of trailers weighing over 3,500 lbs (1 587 kg) with the optional T railer T ow Prep Package.
T railer T owing Weights (Maximum T railer W eight Ratings) The following chart provides the maximum trailer weight ratings towable for your given drivetrain. Engine/ Model Model GCWR (Gross Com- bined Wt. Rating) Frontal Area Max. GTW (Gross T railer Wt.
T railer And T ongue W eight Always load a trailer with 60% to 65% of the weight in the front of the trailer . This places 10% to 15% of the Gross T railer W eight (GTW) on the tow hitch of your vehicle.
NOTE: Remember that everything put into or on the trailer adds to the load on your vehicle. Also, additional factory-installed options, or authorized dealer-installed options, must be considered as part of the total load on your vehicle.
W ARNING! (Continued) • Make certain that the load is secured in the trailer and will not shift during travel. When trailering cargo that is not fully secured, dynamic load shifts can occur that may be difficult for the driver to control. Y ou could lose control of your vehicle and have a collision.
T owing Requirements – T ires − Do not attempt to tow a trailer while using a compact spare tir e. − Proper tir e inflation pressur es are essential to the safe and satisfactory operation of your vehicle. Refer to “T ir es – General Information” in “Starting and Oper- ating” for proper tir e inflation procedur es.
CAUTION! If the trailer weighs more than 1,000 lbs (454 kg) loaded, it should have its own brakes and they should be of adequate capacity . Failure to do this could lead to accelerated brake lining wear , higher brake pedal effort, and longer stopping distances.
The electrical connections are all complete to the vehicle but you must mate the harness to a trailer connector . Refer to the following illustrations.
T owing Tips Before setting out on a trip, practice turning, stopping and backing the trailer in an area away fr om heavy traffic. Automatic T ransmission The DRIVE range can be selected when towing. How- ever , if frequent shifting occurs while in this range, the TOW/HAUL mode (if equipped), or a lower gear range, should be selected.
Cooling System T o reduce potential for engine and transmission over - heating, take the following actions: − City Driving When stopped for short periods of time, shift the trans- mission into NEUTRAL and increase engine idle speed. − Highway Driving Reduce speed.
RECREA TIONAL TOWING (BEHIND MOT ORHOME, ETC.) T owing This V ehicle Behind Another V ehicle T owing Condition Wheel OFF the Ground T wo-Wheel Drive Models Four-Wheel Drive Models Flat T ow NONE NOT A.
Recreational T owing — T wo-Wheel Drive Models DO NOT flat tow this vehicle. Damage to the drivetrain will result. Recreational towing (for two-wheel drive models) is allowed ONL Y if the r ear wheels are OFF the gr ound. This may be accomplished using a tow dolly or vehicle trailer .
NOTE: This vehicle may be towed on a flatbed or vehicle trailer provided all four wheels ar e OFF the ground. CAUTION! T owing this vehicle in violation of the above require- ments can cause severe transmission and/or transfer case damage. Damage from improper towing is not covered under the New V ehicle Limited W arranty .
CAUTION! (Continued) • Do not use a bumper-mounted clamp-on tow bar on your vehicle. The bumper face bar will be damaged. Shifting Into NEUTRAL (N) W ARNING! Y ou or others could be injured if you leave the vehicle unattended with the transfer case in the NEUTRAL (N) position without first fully engaging the parking brake.
4. T urn the ignition switch to the ON/RUN position, but do not start the engine. 5. Press and hold the brake pedal. 6. Shift the transmission into NEUTRAL.
12. Firmly apply the parking brake. 13. Shift the transmission into P ARK. CAUTION! Damage to the transmission may occur if the trans- mission is shifted into P ARK with the transfer case in NEUTRAL (N) and the engine running. W ith the transfer case in NEUTRAL (N) ensure that the engine is off prior to shifting the transmission into P ARK.
1. Bring the vehicle to a complete stop, leaving it con- nected to the tow vehicle. 2. Firmly apply the parking brake. 3. Reconnect the negative battery cable. 4. T urn the key fob to the LOCK/OFF position (if it has been moved or the engine has been started).
NOTE: When shifting out of transfer case NEUTRAL (N), turning the engine OFF may be requir ed to avoid gear clash. 9. Shift the transmission into P ARK. 10. Release the brake pedal. 1 1. Disconnect vehicle fr om the tow vehicle. 12. Start the engine. 13.
WHA T T O DO IN EMERGENCIES CONTENTS 䡵 Hazard W arning Flashers ................ 4 6 0 䡵 If Y our Engine Overheats ................ 4 6 0 䡵 Jacking And T ire Changing ............... 4 6 1 ▫ Jack Location ....................... 4 6 2 ▫ Spare T ire Stowage .
HAZARD W ARNING FLASHERS The Hazard W arning flasher switch is located on the switch bank just above the climate controls. Press the switch to turn on the Hazar d W arning flasher . When the switch is activated, all directional turn signals will flash on and off to warn oncoming traffic of an emer gency .
• Y ou can also turn the temperature contr ol to maximum heat, the mode control to floor and the blower contr ol to high. This allows the heater core to act as a supplement to the radiator and aids in removing heat from the engine cooling system. CAUTION! Driving with a hot cooling system could damage your vehicle.
W ARNING! (Continued) • Being under a jacked-up vehicle is dangerous. The vehicle could slip off the jack and fall on you. Y ou could be crushed. Never put any part of your body under a vehicle that is on a jack. • Never start or run the engine while the vehicle is on a jack.
Preparations for Jacking 1. Park the vehicle on a firm, level surface. A void ice or slippery surfaces. W ARNING! Do not attempt to change a tire on the side of the vehicle closest to moving traffic, pull far enough of f the road to avoid being hit when operating the jack or changing the wheel.
Jacking Instructions W ARNING! Carefully follow these tire changing warnings to help prevent personal injury or damage to your vehicle: • Always park on a firm, level surface as far from the edge of the roadway as possible before raising the vehicle.
CAUTION! Do not attempt to raise the vehicle by jacking on locations other than those indicated in the Jacking Instructions for this vehicle. 1. Remove the spare tir e, jack, and tools from storage. 2. Loosen (but do not remove) the wheel lug nuts by turning them to the left, one turn, while the wheel is still on the ground.
4. For the front axle, place the jack and pr otective cap on the body flange just behind the front tir e Do not raise the vehicle until you are sure the jack is fully engaged. 5. For the rear axle, place the jack and pr otective cap in the slot on the rear tie-down bracket, just forwar d of the rear tir e.
6. Raise the vehicle by turning the jack screw clockwise. Raise the vehicle only until the tire just clears the surface and enough clearance is obtained to install the spare tir e. Minimum tire lift pr ovides maximum stability . W ARNING! Raising the vehicle higher than necessary can make the vehicle less stable.
12. Securely stor e the road wheel and jack in the car go area. NOTE: The compact spare r ests on a foam donut to raise the wheel face off the storage ar ea floor . 13. Have the aluminum road wheel and tir e repair ed as soon as possible and properly secur e the spare tir e, jack and tool kit.
NOTE: When using a portable battery booster pack follow the manufacturer’s operating instr uctions and precautions. CAUTION! Do not use a portable battery booster pack or any other booster source with a system voltage greater than 12 V olts or damage to the battery , starter motor , alternator or electrical system may occur .
W ARNING! • T ake care to avoid the radiator cooling fan when- ever the hood is raised. It can start anytime the ignition switch is on. Y ou can be injured by moving fan blades. • Remove any metal jewelry such as watch bands or bracelets that might make an inadvertent electrical contact.
CAUTION! Failure to follow these procedures could result in damage to the charging system of the booster vehicle or the discharged vehicle. 1. Connect the positive (+) end of the jumper cable to the remote positive (+) post of the dischar ged vehicle.
9. Disconnect the positive (+) end of the jumper cable from the r emote positive (+) post of the discharged vehicle. 10. Reinstall the protective cover over the r emote posi- tive (+) battery post of the discharged vehicle.
CAUTION! T ow hooks are for emergency use only , to rescue a vehicle stranded off road. Do not use tow hooks for tow truck hookup or highway towing. Y ou could damage your vehicle.
NOTE: V ehicles equipped with Quadra-Lift™ must be lowered to the Park (lowest) level, and have automatic leveling disabled, before tying them down (fr om the body) on a trailer or flatbed truck. Refer to the section on Quadra-Lift™ for more information.
Proper towing or lifting equipment is r equired to pr event damage to your vehicle. Use only tow bars and other equipment designed for the purpose, following equip- ment manufacturer ’s instructions.
T wo-Wheel Drive Models The manufacturer r ecommends towing your vehicle with all four wheels OFF the ground using a flatbed. If flatbed equipment is not available, and the transmis- sion is operable, the vehicle may be towed (with rear wheels on the ground) with the transmission in NEU- TRAL .
Four-Wheel Drive V ehicles The manufacturer r ecommends towing with all wheels OFF the ground. Acceptable methods are to tow the vehicle on a flatbed or with one end of vehicle raised and the opposite end on a towing dolly .
.
MAINT AINING YOUR VEHICLE CONTENTS 䡵 Engine Compartment – 3.6L .............. 4 8 1 䡵 Engine Compartment – 5.7L .............. 4 8 2 䡵 Onboard Diagnostic System – OBD II ....... 4 8 3 ▫ Loose Fuel Filler Cap Message ........... 4 8 3 䡵 Emissions Inspection And Maintenance Programs .
▫ Brake System ....................... 5 0 5 ▫ Front/Rear Axle Fluid ................. 5 0 7 ▫ T ransfer Case ....................... 5 0 8 ▫ Automatic T ransmission ............... 5 0 9 ▫ Appearance Care And Protection Fr om Corrosion ....
ENGINE COMP ARTMENT – 3.6L 1 — T otally Integrated Power Module (Fuses) 6 — Air Cleaner Filter 2 — Engine Oil Dipstick 7 — W asher Fluid Reservoir 3 — Engine Oil Fill 8 — Coolant Pressur.
ENGINE COMP ARTMENT – 5.7L 1 — T otally Integrated Power Module (Fuses) 6 — W asher Fluid Reservoir 2 — Automatic T ransmission Dipstick 7 — Engine Oil Dipstick 3 — Engine Oil Fill 8 — C.
ONBOARD DIAGNOSTIC SYSTEM – OBD II Y our vehicle is equipped with a sophisticated onboard diagnostic system called OBD II. This system monitors the performance of the emissions, engine, and automatic transmission control systems.
the SELECT button to turn off the message. If the problem continues, the message will appear the next time the vehicle is started. A loose, improperly installed, or damaged fuel filler cap may also turn on the Malfunction Indicator Light (MIL).
4. Approximately 15 seconds later , one of two things will happen: a. The MIL will flash for about 10 seconds and then return to being fully illuminated until you turn OFF the ignition or start the engine. This means that your vehicle’s OBD II system is not ready and you should not proceed to the I/M station.
DEALER SERVICE Y our authorized dealer has the qualified service person- nel, special tools, and equipment to perform all service operations in an expert manner . Service Manuals are available which include detailed service information for your vehicle.
CAUTION! (Continued) • Y our vehicle has been built with improved fluids that protect the performance and durability of your vehicle and also allow extended maintenance intervals. Do not use chemical flushes in these components as the chemicals can damage your engine, transmission, power steering or air condi- tioning.
Change Engine Oil The oil change indicator system will remind you that it is time to take your vehicle in for scheduled maintenance. Refer to “Maintenance Schedule” for further information. NOTE: Under no circumstances should oil change intervals exceed 8,000 miles (13 000 km) or six months, whichever occurs first.
Engine Oil V iscosity – 3.6L Engine SAE 5W -30 engine oil is r ecommended for all operating temperatures. This engine oil impr oves low temperature starting and vehicle fuel economy . The engine oil filler cap also shows the recommended engine oil viscosity for your vehicle.
Materials Added to Engine Oils Do not add any supplemental materials, other than leak detection dyes, to your engine oil. Engine oil is an engineered pr oduct and its performance may be im- paired by supplemental additives.
W ARNING! The air induction system (air cleaner , hoses, etc) can provide a measure of protection in the case of engine backfire. Do not remove the air induction system (air cleaner , hoses, etc.) unless such removal is necessary for repair or maintenance.
W ARNING! (Continued) • Battery gas is flammable and explosive. Keep flame or sparks away from the battery . Do not use a booster battery or any other booster source with an output greater than 12 V olts. Do not allow cable clamps to touch each other .
Air Conditioner Maintenance For best possible performance, your air conditioner should be checked and serviced by an authorized dealer at the start of each warm season. This service should include cleaning of the condenser fins and a performance test.
Refrigerant Recovery and Recycling R-134a Air Conditioning Refrigerant is a hydrofluor o- carbon (HFC) that is endorsed by the Environmental Protection Agency (EP A) and is an ozone-saving product.
A void using the wiper blades to wipe frost or ice fr om the windshield. Keep the blade rubber out of contact with petroleum pr oducts such as engine oil, gasoline, etc. NOTE: Life expectancy of wiper blades varies depend- ing on geographical area and fr equency of use.
3. Grab the bottom of the wiper blade and rotate it forward to unsnap the blade pivot pin fr om the wiper blade holder . 4. Install the wiper blade pivot pin into the wiper blade holder at the end of the wiper arm, and firmly press the wiper blade until it snaps into place.
clean the wiper blades, this will help blade performance. T o prevent fr eeze-up of your windshield washer system in cold weather , select a solution or mixture that meets or exceeds the temperature range of your climate. This rating information can be found on most washer fluid containers.
W ARNING! • Exhaust gases can injure or kill. They contain carbon monoxide (CO), which is colorless and odorless. Breathing it can make you unconscious and can eventually poison you. T o avoid breathing CO, refer to “Safety T ips/Exhaust Gas” in “Things T o Know Before Starting Y our V ehicle” for further information.
Under normal operating conditions, the catalytic con- verter will not requir e maintenance. However , it is impor - tant to keep the engine properly tuned to assur e proper catalyst operation and prevent possible catalyst damage. NOTE: Intentional tampering with emissions control systems can result in civil penalties being assessed against you.
Engine Coolant Checks Check the engine coolant (antifreeze) pr otection every 12 months (before the onset of fr eezing weather , wher e applicable). If the engine coolant (antifreeze) is dirty or rusty in appearance, the system should be drained, flushed and refilled with fr esh engine coolant (anti- freeze).
CAUTION! • Mixing of engine coolant (antifreeze), other than the specified HOA T engine coolant (antifreeze), may result in engine damage and may decrease corrosion protection.
• Mix a minimum solution of 50% HOA T engine coolant (antifreeze) and distilled water . Use higher concentra- tions (not to exceed 70%) if temperatures below -34°F (-37°C) are anticipated. • Use only high purity water such as distilled or deion- ized water when mixing the water/engine coolant (antifreeze) solution.
W ARNING! (Continued) • Do not use a pressure cap other than the one specified for your vehicle. Personal injury or en- gine damage may result. Disposal of Used Engine Coolant Used ethylene glycol-based engine coolant (antifreeze) is a regulated substance r equiring proper disposal.
Points T o Remember NOTE: When the vehicle is stopped after a few miles (kilometers) of operation, you may observe vapor coming from the fr ont of the engine compartment.
Brake System In order to assur e brake system performance, all brake system components should be periodically inspected. Refer to the “Maintenance Schedule” for the proper maintenance intervals. W ARNING! Riding the brakes can lead to brake failure and possibly a collision.
W ARNING! • Use only manufacturer’s recommended brake fluid. Refer to “Fluids, Lubricants, and Genuine Parts” in “Maintaining Y our V ehicle” for further information. Using the wrong type of brake fluid can severely damage your brake system and/or impair its performance.
W ARNING! (Continued) • Do not allow petroleum based fluid to contami- nate the brake fluid. Brake seal components could be damaged, causing partial or complete brake failure. This could result in a collision. Front/Rear Axle Fluid For normal service, periodic fluid level checks are not requir ed.
CAUTION! Do not over tighten the plugs as it could damage then and cause them to leak. Selection of Lubricant Use only the manufacturer’s r ecommended fluid. Refer to “Fluids, Lubricants, and Genuine Parts” in “Maintain- ing Y our V ehicle” for further information.
Automatic T ransmission Selection of Lubricant It is important that the proper lubricant is used in the transmission to assure optimum transmission perfor - mance. Use only the manufacturer’s r ecommended trans- mission fluid. Refer to “Fluids, Lubricants, and Genuine Parts” in “Maintaining Y our V ehicle” for further informa- tion.
CAUTION! Do not use chemical flushes in your transmission as the chemicals can damage your transmission compo- nents. Such damage is not covered by the New V ehicle Limited W arranty . Fluid Level Check – 3.6L Engine Regular fluid level checks are not r equired.
Fluid Level Check – 5.7L Engine Check the fluid level while the transmission is at normal operating temperature. This occurs after at least 15 miles (25 km) of driving. At normal operating temperature the fluid cannot be held comfortably between the fingertips.
CAUTION! Be aware that if the fluid temperature is below 50°F (10°C) it may not register on the dipstick. Do not add fluid until the temperature is elevated enough to produce an accurate reading.
W ashing • W ash your vehicle regularly . Always wash your ve- hicle in the shade using MOP AR 威 Car W ash or a mild car wash soap, and rinse the panels completely with clear water . • If insects, tar , or other similar deposits have accumu- lated on your vehicle, use MOP AR 威 Super Kleen Bug and T ar Remover or equivalent to remove.
• If you detect any stone chips or scratches in the paint, touch them up immediately . The cost of such repairs is considered the r esponsibility of the owner . • If your vehicle is damaged due to a collision or similar cause which destroys the paint and pr otective coating, have your vehicle repair ed as soon as possible.
• For tough stains, apply MOP AR 威 T otal Clean or a mild soap solution to a clean, damp cloth and remove the stain. Use a fresh, damp towel to r emove soap residue. • For grease stains, apply MOP AR 威 Multi-Purpose Cleaner or equivalent to a clean, damp cloth and remove the stain.
W ARNING! Do not use volatile solvents for cleaning purposes. Many are potentially flammable, and if used in closed areas, they may cause respiratory harm. Cleaning Headlights Y our vehicle has plastic headlights that are lighter and less susceptible to stone breakage than glass headlights.
2. Dry with a soft cloth. Seat Belt Maintenance Do not bleach, dye or clean the belts with chemical solvents or abrasive cleaners. This will weaken the fabric. Sun damage will also weaken the fabric. If the belts need cleaning, use MOP AR 威 T otal Clean, a mild soap solution, or lukewarm water .
Cavity Car- tridge Fuse Mini Fuse Description J01 40 Amp Green Air Suspension J02 30 Amp Pink Power Liftgate Module J03 30 Amp Pink T railer T ow J04 25 Amp Natural Driver Door Node J05 25 Amp Natural.
Cavity Car- tridge Fuse Mini Fuse Description J18 20 Amp Blue Powertrain Control Module/Powertrain Control Module T rans- mission Range J19 60 Amp Y ellow Radiator Fan Motor HI/ Radiator Fan Motor Low.
Cavity Car- tridge Fuse Mini Fuse Description M10 15 Amp Blue V ideo/Universal Garage Door Opener M1 1 10 Amp Red Heating, V entilation & Air Conditioning (Cli- mate Control System) M12 30 Amp Gre.
Cavity Car- tridge Fuse Mini Fuse Description M22 10 Amp Red Horns (Low/High) – Right M23 10 Amp Red Horns (Low/High) – Left M24 25 Amp Natural Rear W iper M25 20 Amp Y ellow Fuel Pump Motor Outpu.
Cavity Car- tridge Fuse Mini Fuse Description M35 15 Amp Blue Left Rear Parklamps M36 20 Amp Y ellow Power Outlet M37 10 Amp Red Antilock Brakes/ Stability Control System Module M38 25 Amp Natural All.
VEHICLE STORAGE If you are leaving your vehicle dormant for mor e than 21 days you may want to take steps to protect your battery . Y ou may: • Remove fuse #27 in the T otally Integrated Power Module (TIPM) labeled Ignition-Off Draw (IOD#1). • Or , disconnect the negative cable from the battery .
Exterior Lights Bulb T ype Aux Aperature Backup Lamps ........ 7440 (W21W) Auxiliary Liftgate T ail Lamps .............. W 3 W Front Park/T urn Lamp .................... T 2 0 Front Fog Lamps ..................... PSX24W Front Side Marker ............
NOTE: On vehicles equipped with High Intensity Dis- charge (HID) headlamps, when the headlamps ar e turned on, there is a blue hue to the lamps. This dimin- ishes and becomes more white after appr oximately 10 seconds, as the system charges. Halogen Headlamps – If Equipped 1.
2. Firmly grasp the bulb by the two latches and squeeze them together to unlock the bulb from the back of the front fog lamp housing. 3. Pull the bulb straight out from the keyed opening in the housing. CAUTION! • Do not touch the new bulb with your fingers.
Rear T ail, Stop, T urn Signal, And Backup Lamps 1. Raise the liftgate. 2. Remove the two push-pins from the tail lamp housing. 3. Grasp the tail lamp and pull firmly rearwar d to disengage the lamp from the apertur e panel. 4. T wist socket counter clockwise and remove fr om lamp.
Rear Liftgate Mounted T ail Lamp 1. Raise the liftgate. 2. Use a fiber stick or flat blade screw driver to pry the lower trim from the liftgate. 3. Once lower trim is loose, close the liftgate. 4. Open the flipper glass. 5. Pull up glass seal at bottom of window opening.
Center High-Mounted Stop Lamp (CHMSL) The center high-mounted stop lamp is an LED assembly . See your authorized dealer for replacement. Rear License Lamp 1. Use a screw driver to gently pry against the side of the snap tab to remove the license lamp lens.
FLUID CAP ACITIES U.S. Metric Fuel (Approximate) 3.6L and 5.7L Engines 24 Gallons 91 Liters Engine Oil with Filter 3.6L Engine (SAE 5W -30, API Certified) 6 Quarts 5.6 Liters 5.7L Engine (SAE 5W -20, API Certified) 7 Quarts 6.6 Liters Cooling System * 3.
FLUIDS, LUBRICANTS, AND GENUINE P ARTS Engine Component Fluid, Lubricant, or Genuine Part Engine Coolant MOP AR 威 Antifreeze/Coolant 5 Y ear/100,000 Mile Formula HOA T (Hy- brid Organic Additive T echnology) or equivalent.
Chassis Component Fluid, Lubricant, or Genuine Part Automatic T ransmission MOP AR 威 A TF+4 威 Automatic T ransmission Fluid or equivalent licensed A TF+4 威 product. T ransfer Case – 3.6L Engine Shell Automatic T ransmission Fluid 3353 or equivalent.
MAINTENANCE SCHEDULES CONTENTS 䡵 Maintenance Schedule .................. 5 3 4 ▫ Required Maintenance Intervals .......... 5 3 5 8 M A I N T E N A N C E S C H E D U L E S.
MAINTENANCE SCHEDULE The Scheduled Maintenance services listed in this manual must be done at the times or mileages specified to protect your vehicle warranty and ensur e the best vehicle performance and reliability .
referring to the steps described under “Electr onic V ehicle Information Center (EVIC)/Oil Change Required” in “Understanding Y our Instrument Panel” for further in- formation. At Each Stop for Fuel • Check the engine oil level about five minutes after a fully warmed engine is shut off.
8,000 Miles (13,000 km) or 6 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate the tires, rotate at the first sign of irregular wear , even if it occurs before 8,000 miles (13 000 km).
24,000 Miles (39,000 km) or 18 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate the tires, rotate at the first sign of irregular wear , even if it occurs before 24,000 miles (39 000 km). ❏ Inspect the CV joints.
40,000 Miles (65,000 km) or 30 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate the tires, rotate at the first sign of irregular wear , even if it occurs before 40,000 miles (65 000 km).
56,000 Miles (91,000 km) or 42 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate the tires, rotate at the first sign of irregular wear , even if it occurs before 56,000 miles (91 000 km).
64,000 Miles (104,000 km) or 48 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate the tires, rotate at the first sign of irregular wear , even if it occurs before 64,000 miles (104 000 km). ❏ Replace the engine air cleaner filter .
72,000 Miles (1 17,000 km) or 54 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate the tires, rotate at the first sign of irregular wear , even if it occurs before 72,000 miles (1 17 000 km). ❏ Inspect the CV joints.
88,000 Miles (143,000 km) or 66 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate the tires, rotate at the first sign of irregular wear , even if it occurs before 88,000 miles (143 000 km).
96,000 Miles (156,000 km) or 72 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate the tires, rotate at the first sign of irregular wear , even if it occurs before 96,000 miles (156 000 km). ❏ Replace the engine air cleaner filter .
104,000 Miles (169,000 km) or 78 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate the tires, rotate at the first sign of irregular wear , even if it occurs before 104,000 miles (169 000 km). ❏ Flush and replace the engine coolant if not done at 60 months.
120,000 Miles (195,000 km) or 90 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate the tires, rotate at the first sign of irregular wear , even if it occurs before 120,000 miles (195 000 km). ❏ Inspect the CV joints.
128,000 Miles (208,000 km) or 96 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate the tires, rotate at the first sign of irregular wear , even if it occurs before 128,000 miles (208 000 km). ❏ Replace the engine air cleaner filter .
144,000 Miles (234,000 km) or 108 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate the tires, rotate at the first sign of irregular wear , even if it occurs before 144,000 miles (234 000 km). ❏ If using your vehicle for any of the following: Dusty or off-road conditions.
† This maintenance is recommended by the manufactur er to the owner , but is not required to maintain emissions warranty . W ARNING! • Y ou can be badly injured working on or around a motor vehicle. Do only service work for which you have the knowledge and the right equipment.
IF YOU NEED CONSUMER ASSIST ANCE CONTENTS 䡵 Suggestions For Obtaining Service For Y our V ehicle .............................. 5 5 1 ▫ Prepar e For The Appointment ........... 5 5 1 ▫ Prepar e A List ...................... 5 5 1 ▫ Be Reasonable W ith Requests .
䡵 Department Of T ransportation Uniform T ir e Quality Grades ........................ 5 5 7 ▫ T readwear ......................... 5 5 7 ▫ T raction Grades .
SUGGESTIONS FOR OBT AINING SERVICE FOR YOUR VEHICLE Prepare For The Appointment If you’re having warranty work done, be sur e to have the right papers with you. T ake your warranty folder . All work to be performed may not be covered by the warranty .
This is why you should always talk to an authorized dealer’s service manager first. Most matters can be re- solved with this process. • If for some reason you ar e still not satisfied, talk to the general manager or owner of the authorized dealer- ship.
Customer Assistance For The Hearing Or Speech Impaired (TDD/TTY) T o assist customers who have hearing difficulties, the manufacturer has installed special TDD (T elecommuni- cation Devices for the Deaf) equipment at its customer center .
W e appreciate that you have made a major investment when you purchased the vehicle. An authorized dealer has also made a major investment in facilities, tools, and training to assure that you ar e absolutely delighted with the ownership experience.
If NHTSA receives similar complaints, it may open an investigation, and if it finds that a safety defect exists in a group of vehicles, it may or der a recall and r emedy campaign. However , NHTSA cannot become involved in individual problems between you, your authorized dealer , and the manufacturer .
• Service Manuals These comprehensive Service Manuals pr ovide the information that students and professional technicians need in diagnosing/troubleshooting, pr oblem solving, maintaining, servicing, and repairing Chrysler Gr oup LLC vehicles.
DEP ARTMENT OF TRANSPORT A TION UNIFORM TIRE QUALITY GRADES The following tire grading categories wer e established by the National Highway T raffic Safety Administration. The specific grade rating assigned by the tire’s manufactur er in each category is shown on the sidewall of the tires on your vehicle.
T emperature Grades The temperature grades ar e A (the highest), B, and C, repr esenting the tire’s r esistance to the generation of heat and its ability to dissipate heat, when tested under controlled conditions on a specified indoor laboratory test wheel.
INDEX 10.
Adaptive Cruise Contr ol (ACC) (Cruise Control) . . 164 Adding Fuel ........................... 4 3 0 Additives, Fuel ......................... 4 2 5 Air Cleaner , Engine (Engine Air Cleaner Filter) . . . 490 Air Conditioner Maintenance ..............
Fluid Level Check ................... 510,51 1 Fluid T ype ........................... 5 0 9 Special Additives ...................... 5 0 9 T orque Converter ...................... 3 5 2 Autostick ............................. 3 4 8 Auxiliary Electrical Outlet (Power Outlet) .
Cargo Ar ea Features ...................... 2 2 8 Cargo Compartment ...................... 2 2 8 Light ............................... 2 2 9 Cargo Light ............................ 2 2 9 Cargo T ie-Downs ........................ 2 3 2 Cargo (V ehicle Loading) .
Coolant Level ......................... 5 0 3 Disposal of Used Coolant ................ 5 0 3 Drain, Flush, and Refill .................. 5 0 0 Inspection ........................... 5 0 0 Points to Remember .................... 5 0 4 Pressur e Cap ..
E-85 Fuel ............................. 4 2 6 Electric Remote Mirrors ................... 1 0 9 Electrical Outlet, Auxiliary (Power Outlet) ...... 2 1 9 Electronic Brake Contr ol System ............. 3 7 8 Anti-Lock Brake System ................. 3 7 8 Brake Assist System .
Oil Selection ....................... 488,530 Oil Synthetic ......................... 4 8 9 Overheating .......................... 4 6 0 Starting ............................. 3 3 9 T emperature Gauge .................... 2 5 3 Engine Oil V iscosity .
Engine Oil ........................... 4 8 7 Power Steering ........................ 3 7 5 Fluids, Lubricants and Genuine Parts .......... 5 3 1 Fog Light Service ........................ 5 2 5 Fog Lights .......................... 246,525 Folding Rear Seat .
Gasoline, Reformulated ................... 4 2 3 Gauges Coolant T emperature ................... 2 5 3 Fuel ............................... 2 5 2 Speedometer ......................... 2 5 1 T achometer .......................... 2 4 4 Gear Ranges ....
Immobilizer (Sentry Key) ................... 1 8 Infant Restraint ........................ 80,81 Inflation Pressur e T ires .................... 4 0 1 Information Center , V ehicle ................. 2 5 4 Inside Rearview Mirror ................... 1 0 6 Instrument Cluster .
Light Bulbs ............................. 9 7 Lights .............................. 97,144 Airbag ...................... 73,74,79,95,244 Anti-Lock ........................... 2 5 1 Automatic Headlights ................... 1 4 5 Back-Up ...............
T urn Signal ................... 97,144,525,527 V anity Mirror ......................... 1 1 0 Loading V ehicle ......................... 4 3 3 T i r e s ............................... 3 9 6 Locks ................................. 3 2 Child Protection .
Multi-Function Control Lever ............... 1 4 4 New V ehicle Break-In Period ................ 9 2 Occupant Restraints ................... 47,72,76 Occupant Restraints (Sedan) ........... 67,68,72,75 Odometer ............................. 2 4 6 T r i p .
Parking Brake .......................... 3 7 6 Personal Settings ........................ 2 7 6 Pets .................................. 9 2 Pets, T ransporting ........................ 9 2 Phone, Cellular ......................... 1 1 9 Phone, Hands-Free (Uconnect™) .
Rear Park Sense System ................... 1 9 2 Rear Seat, Folding ....................... 1 3 5 Rear W indow Defr oster ................... 2 3 5 Rear W indow Featur es .................... 2 3 4 Rear W iper/W asher ...................... 2 3 4 Rearview Mirrors .
Satellite Radio (Uconnect™ studios) ........... 3 1 6 Schedule, Maintenance .................... 5 3 4 Seat Belt Reminder ....................... 6 1 Seat Belts ............................ 49,95 Adjustable Upper Shoulder Anchorage ........ 5 4 And Pregnant W omen .
Shifting ............................... 3 4 5 Automatic T ransmission ................. 3 4 5 Shoulder Belts ........................... 4 9 Side Airbag ............................. 7 4 Signals, T urn ................... 97,246,525,527 Sirius Backseat TV™ (Uconnect™ studios) .
Supplemental Restraint System - Airbag ........ 6 3 Suspension, Air ......................... 3 6 2 Sway Control, T railer ..................... 3 8 4 Synthetic Engine Oil ...................... 4 8 9 System, Remote Starting .................... 2 8 T achometer .
Snow T ir es ........................... 4 1 1 Spare T ire ........................... 4 6 2 Spinning ............................ 4 0 6 T read W ear Indicators ................... 4 0 7 Wheel Mounting ...................... 4 6 7 T ongue W eight/T railer W eight .
UCI Connector ......................... 3 0 9 Uconnect™ (Hands-Free Phone) ............. 1 1 9 Uniform T ir e Quality Grades ................ 5 5 7 Universal Consumer Interface (UCI) Connector . . . 309 Universal T ransmitter ..................... 2 0 6 Untwisting Procedur e, Seat Belt .
W indows .............................. 4 0 Power ............................... 4 0 W indshield Defr oster ................... 95,322 W indshield W ashers ...................... 1 5 3 Fluid ............................... 4 9 6 W indshield W iper Blades .
291680.ps 11JK72-126-AA Chrysler 1" gutter 05/14/2010 06:18:00 VEHICLES SOLD IN CANADA W ith r espect to any V ehicles Sold in Canada, the name Chrysler Group LLC shall be deemed to be deleted and the name Chrysler Canada Inc. used in substitution therefor e.
Chrysler Group LL C 10 WK741 -126-A D Fourth Edition Printed in U.S.A..
デバイスChrysler 11WK741-126-ABの購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Chrysler 11WK741-126-ABをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはChrysler 11WK741-126-ABの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Chrysler 11WK741-126-ABの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Chrysler 11WK741-126-ABで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Chrysler 11WK741-126-ABを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はChrysler 11WK741-126-ABの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Chrysler 11WK741-126-ABに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちChrysler 11WK741-126-ABデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
