Cisco SystemsメーカーOL-26646-01の使用説明書/サービス説明書
ページ先へ移動 of 124
Americas Headquarters Cisco Systems, In c. 170 West Tasman Drive San Jose, CA 951 34-1706 USA http://www.ci sco.com Tel: 408 526-4000 800 553-NETS (638 7) Fax: 408 527-0883 Cisco U CS C22 S erver Inst.
THE SPECIFICATION S AND INFORMATION REGARDING THE P RODUCTS IN TH IS MANUAL ARE SUBJECT TO CHANGE WITHOUT NOTICE. ALL STATEMENTS , INFORMATION, AND RECOMMENDA TIONS IN THI S MANUAL ARE BE LIEVED TO BE A CCURATE BUT ARE PRESENTED WI THOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED.
iii Cisco UCS C22 Server Insta llation and Service Guide OL-26646-01 CONTENTS Preface vii Related Documentation vii Organization vii Audience viii Documentation Feedback viii Conventi ons viii Obtaini.
Contents iv Cisco UCS C22 Server Insta llation and Service Guide OL-26646-01 Cisco Integrated Manageme nt Interface (Cisco IMC) 3-1 Server Configuration Utility 3-1 Status LEDs and Buttons 3-2 Front P.
Contents v Cisco UCS C22 Server Insta llation and Service Guide OL-26646-01 Replacing the SuperCap Power Module (RAID Backup Unit) 3-41 Installing a Trusted Platform Mo dule 3-43 Enabling the In tel T.
Contents vi Cisco UCS C22 Server Insta llation and Service Guide OL-26646-01 Small Form Factor 8-Drive Backplane Cabling C-19 Large Form Factor 4-Drive Backpla ne Cabling C-21 Restoring RAID Configura.
vii Cisco UCS C22 Server Insta llation and Service Guide OL-26646-01 Preface This preface describes the audi ence, organi zation, and conventions o f the Cisco UCS C22 Server Installation an d Service Guide . It al so provides information about h ow to obtain related docum entation.
viii Cisco UCS C22 Server Insta llation and Service Guide OL-26646-01 Preface Audience This guide is for experien ced network administra tors who configu re and maintain Cisco servers. Documentation Feedback T o provide technical feedback on this document, or to report an error or omissi on, please send your comments to ucs-docfeedback@external.
ix Cisco UCS C22 Server Insta llation and Service Guide OL-26646-01 Preface V aroitus TÄRKEITÄ TURVALLISUUSOHJEIT A Tämä varoitusmerkki merkitsee vaaraa.
x Cisco UCS C22 Server Insta llation and Service Guide OL-26646-01 Preface Avis o INSTRUÇÕES IMPORT ANTES DE SEGURANÇA Este símbolo de aviso significa perigo.
xi Cisco UCS C22 Server Insta llation and Service Guide OL-26646-01 Preface Avis o INSTRUÇÕES IMPORT ANTES DE SEGURANÇA Este símbolo de aviso significa perigo.
xii Cisco UCS C22 Server Insta llation and Service Guide OL-26646-01 Preface.
xiii Cisco UCS C22 Server Insta llation and Service Guide OL-26646-01 Preface Obtaining Documentation and Submitting a Service Request For information on obtai ning documentation, using the Cisco Bug .
xiv Cisco UCS C22 Server Insta llation and Service Guide OL-26646-01 Preface.
CH A P T E R 1-1 Cisco UCS C22 Server Inst allation and Service Gu ide OL-26646-01 1 Overview This chapter provi des an overview of th e Cisco UCS C22 server features. This server is a part of the Cisco UCS C-Series rack -mount server family . It is a high-performance, 1RU (rack-unit) server .
1-2 Cisco UCS C22 Server Insta llation and Service Guide OL-26646-01 Chapter 1 Overvi ew Figure 1-2 shows the front panel featur es of the larg e form-factor drives version of the server .
1-3 Cisco UCS C22 Server Inst allation and Service Gu ide OL-26646-01 Chapter 1 Overview Figure 1-3 shows the rear panel features of the server (identical for both versions of the server) . Figur e 1 -3 Rear P anel F eatur es Ta b l e 1 - 1 lists the features of the server .
1-4 Cisco UCS C22 Server Insta llation and Service Guide OL-26646-01 Chapter 1 Overvi ew W oL The 1-Gb Base-T Ethernet LAN ports suppor t the wake-on-LAN (W oL) stand ard. Power One 450 W power supply or one 650W p ower supply . See also Power Specifications, page A- 2 .
CH A P T E R 2-1 Cisco UCS C22 Server Inst allation and Service Gu ide OL-26646-01 2 Installing the Server This chapter d escribes how to in stall the server, and it includes the fo llowing sectio ns:.
2-2 Cisco UCS C22 Server Insta llation and Service Guide OL-26646-01 Chapter 2 Installin g the Server Unpacking and Inspecting the Server Unpacking and Inspecting the Server Caution When handling internal server co mponents, wear an ESD strap and handl e modules by the carrier edges only .
2-3 Cisco UCS C22 Server Inst allation and Service Gu ide OL-26646-01 Chapter 2 Installing the Server Preparing for Serv er Installation Preparing for Server Installation This section prov ides inform.
2-4 Cisco UCS C22 Server Insta llation and Service Guide OL-26646-01 Chapter 2 Installin g the Server Preparing for Server Installation Rack Requirements This section prov ides the requirem en ts for the stan dard open racks. The rack must be of the following type: • A standard 19-in.
2-5 Cisco UCS C22 Server Inst allation and Service Gu ide OL-26646-01 Chapter 2 Installing the Server Installing the Server In a Rack Installing the Server In a Rack This section describes how to install the server in a rack.
2-6 Cisco UCS C22 Server Insta llation and Service Guide OL-26646-01 Chapter 2 Installin g the Server Installing the Server In a Rack Step 2 Install the slide rails onto the rack: a. Position a slide-rail assembly inside the tw o left-side rack posts (see Figure 2-3 ).
2-7 Cisco UCS C22 Server Inst allation and Service Gu ide OL-26646-01 Chapter 2 Installing the Server Installing the Server In a Rack b. Push the serv er into the slide rails unti l it stops at the internal stops.
2-8 Cisco UCS C22 Server Insta llation and Service Guide OL-26646-01 Chapter 2 Installin g the Server Initial Server Setup Initial Server Setup Connecting and Powering On the Server (Standalone Mode) .
2-9 Cisco UCS C22 Server Inst allation and Service Gu ide OL-26646-01 Chapter 2 Installing the Server Initial Server Setup Step 3 Open the Cisco IMC Conf iguration Util ity: a. Press the Pow e r button to boot the server . W atch for the promp t to press F8.
2-10 Cisco UCS C22 Server Insta llation and Service Guide OL-26646-01 Chapter 2 Installin g the Server Initial Server Setup b. Use this utility to change the NIC redundancy to your preference. This server has three possible NIC redundanc y settings: – None—The Ethernet ports operate independent ly and do not f ail ov er if there is a problem.
2-11 Cisco UCS C22 Server Inst allation and Service Gu ide OL-26646-01 Chapter 2 Installing the Server Initial Server Setup Step 14 Press F5 to refresh the settings you made.
2-12 Cisco UCS C22 Server Insta llation and Service Guide OL-26646-01 Chapter 2 Installin g the Server NIC Modes and NIC Redundan cy Settings NIC Modes and NIC Redundancy Settings This server h as the follo wing NIC mode settings th at you can choose from: • Shared LOM EXT (default)—This is shared LOM extend ed mode.
2-13 Cisco UCS C22 Server Inst allation and Service Gu ide OL-26646-01 Chapter 2 Installing the Server System BIOS and Cisco IMC Firmware System BIOS and Cisco IMC Firmware This section includes inf o.
2-14 Cisco UCS C22 Server Insta llation and Service Guide OL-26646-01 Chapter 2 Installin g the Server System BIOS and Cisco IMC Firmware Accessing the System BIOS T o change the BIOS settings for your server , follow these steps. Detailed instructions ar e also printed on the BIOS screens.
2-15 Cisco UCS C22 Server Inst allation and Service Gu ide OL-26646-01 Chapter 2 Installing the Server Service He aders and Jump ers Service Headers and Jumpers This section includes the following top.
2-16 Cisco UCS C22 Server Insta llation and Service Guide OL-26646-01 Chapter 2 Installin g the Server Service Headers a nd Jumpers Using the BIOS Recovery Header CN34 Depending on which stage t he BIOS becomes corrupted, you might see dif feren t behavior .
2-17 Cisco UCS C22 Server Inst allation and Service Gu ide OL-26646-01 Chapter 2 Installing the Server Service He aders and Jump ers Note During the BIOS update, the Cisco IMC will shut down th e server and th e screen will be bl ank for about 10 minutes.
2-18 Cisco UCS C22 Server Insta llation and Service Guide OL-26646-01 Chapter 2 Installin g the Server Service Headers a nd Jumpers Procedure 2: Use Recovery Jumper and recovery.cap File See Figure 2-6 for the locati on of the CN34 header . Step 1 Download the BIOS update package an d extract it to a temp orary locati on.
2-19 Cisco UCS C22 Server Inst allation and Service Gu ide OL-26646-01 Chapter 2 Installing the Server Service He aders and Jump ers.
2-20 Cisco UCS C22 Server Insta llation and Service Guide OL-26646-01 Chapter 2 Installin g the Server Service Headers a nd Jumpers.
CH A P T E R 3-1 Cisco UCS C22 Server Inst allation and Service Gu ide OL-26646-01 3 Maintaining the Server This chapter describes how to diagnose server system problems using LEDs.
3-2 Cisco UCS C22 Server Insta llation and Service Guide OL-26646-01 Chapter 3 Mainta ining the Se rver Status LEDs an d Buttons Status LEDs and Buttons This section descri bes the location and meanin.
3-3 Cisco UCS C22 Server Inst allation and Service Gu ide OL-26646-01 Chapter 3 Maintaining the Server Status LEDs and Button s System status • Green—The server is running in normal operating condition. • Green, blinking—The server is performi ng system initialization and memory check.
3-4 Cisco UCS C22 Server Insta llation and Service Guide OL-26646-01 Chapter 3 Mainta ining the Se rver Status LEDs an d Buttons Rear Panel LEDs and Buttons Figure 3-2 shows the rear p anel LEDs and buttons.
3-5 Cisco UCS C22 Server Inst allation and Service Gu ide OL-26646-01 Chapter 3 Maintaining the Server Status LEDs and Button s 10/100/1000 Ether net dedicated management link status • Off—No l ink is present. • Green—Link is active. • Green, blinking—T raffic is present on the active link.
3-6 Cisco UCS C22 Server Insta llation and Service Guide OL-26646-01 Chapter 3 Mainta ining the Se rver Preparing for Server Co mponent Installation Preparing for Server Component Installation This se.
3-7 Cisco UCS C22 Server Inst allation and Service Gu ide OL-26646-01 Chapter 3 Maintaining the Server Preparing for Server Compone nt Installation Removing and Replacing the Server Top Cover T o remo.
3-8 Cisco UCS C22 Server Insta llation and Service Guide OL-26646-01 Chapter 3 Mainta ining the Se rver Preparing for Server Co mponent Installation Removing and Replacing the Front Chassis Panel T o .
3-9 Cisco UCS C22 Server Inst allation and Service Gu ide OL-26646-01 Chapter 3 Maintaining the Server Preparing for Server Compone nt Installation Replaceable Component Locations This section shows the lo cations of the componen ts that are discussed in this ch apter .
3-10 Cisco UCS C22 Server Insta llation and Service Guide OL-26646-01 Chapter 3 Mainta ining the Se rver Preparing for Server Co mponent Installation Color-Coded Touch Points This server has color -coded touch po ints that in dicate thumbscrews and latches on replaceable and hot-swappable com ponents.
3-11 Cisco UCS C22 Server Inst allation and Service Gu ide OL-26646-01 Chapter 3 Maintaining the Server Installing or Replacing Server Comp onents Installing or Replacing Server Components War ni ng B.
3-12 Cisco UCS C22 Server Insta llation and Service Guide OL-26646-01 Chapter 3 Mainta ining the Se rver Installing or Replacin g Server Components Replacing Hard Drives or Solid State Drives This sec.
3-13 Cisco UCS C22 Server Inst allation and Service Gu ide OL-26646-01 Chapter 3 Maintaining the Server Installing or Replacing Server Comp onents c. If you are r eplacing an existing drive, remove the fo ur dri ve-tray screws that secure the drive to the tray and then lift t he drive out of the tray .
3-14 Cisco UCS C22 Server Insta llation and Service Guide OL-26646-01 Chapter 3 Mainta ining the Se rver Installing or Replacin g Server Components c. Remove the top cover as described in “Removing and Replacing the Serv er T op Co ver” section on page 3-7 .
3-15 Cisco UCS C22 Server Inst allation and Service Gu ide OL-26646-01 Chapter 3 Maintaining the Server Installing or Replacing Server Comp onents Figur e 3-8 Replacing the Fr on t Oper ations P anel .
3-16 Cisco UCS C22 Server Insta llation and Service Guide OL-26646-01 Chapter 3 Mainta ining the Se rver Installing or Replacin g Server Components Replacing a Drive Backplane Note The Small Form Factor (eight -drive) and Large Form Factor (four -drive) backplanes are factory-configurable options.
3-17 Cisco UCS C22 Server Inst allation and Service Gu ide OL-26646-01 Chapter 3 Maintaining the Server Installing or Replacing Server Comp onents c. Thread the two front operati on panel ribbon cables back through t he opening in the backplane assembly .
3-18 Cisco UCS C22 Server Insta llation and Service Guide OL-26646-01 Chapter 3 Mainta ining the Se rver Installing or Replacin g Server Components Replacing Fan Modules The five fan modules in the server are numbered as follows when you ar e facing the front of the server (also see Figure 3-1 1 ).
3-19 Cisco UCS C22 Server Inst allation and Service Gu ide OL-26646-01 Chapter 3 Maintaining the Server Installing or Replacing Server Comp onents Figur e 3-1 1 Replacing F an Modules Replacing DIMMs .
3-20 Cisco UCS C22 Server Insta llation and Service Guide OL-26646-01 Chapter 3 Mainta ining the Se rver Installing or Replacin g Server Components Memory Performance Guide lines and Population Rules This section describes the ty pe of memory that th e server requires an d its effect on performance.
3-21 Cisco UCS C22 Server Inst allation and Service Gu ide OL-26646-01 Chapter 3 Maintaining the Server Installing or Replacing Server Comp onents DIMM Population Rules Observe the following g uidelines when installing or rep lacing DIMMs: • Each CPU supports thr ee memory channels.
3-22 Cisco UCS C22 Server Insta llation and Service Guide OL-26646-01 Chapter 3 Mainta ining the Se rver Installing or Replacin g Server Components Enabling Low-Voltage DIMM Operation Y ou can enable low voltage (1.35 V) DIMM operation for all DIMMs in the server .
3-23 Cisco UCS C22 Server Inst allation and Service Gu ide OL-26646-01 Chapter 3 Maintaining the Server Installing or Replacing Server Comp onents DIMM Replacement Procedure T o install a DIMM assembly , follow these steps: Step 1 Remove the DIMM that you are replacing: a.
3-24 Cisco UCS C22 Server Insta llation and Service Guide OL-26646-01 Chapter 3 Mainta ining the Se rver Installing or Replacin g Server Components Replacing CPUs and Heatsinks This server has two CPU sockets. Each CPU supports three DIM M channels (six DIMM slots).
3-25 Cisco UCS C22 Server Inst allation and Service Gu ide OL-26646-01 Chapter 3 Maintaining the Server Installing or Replacing Server Comp onents Single-CPU Restrictions The minimum configuration is that th e server must have at least CPU1 installed.
3-26 Cisco UCS C22 Server Insta llation and Service Guide OL-26646-01 Chapter 3 Mainta ining the Se rver Installing or Replacin g Server Components Figure 3-13 CPU Sock et Latc hes Step 2 Remove a protective cap or an old CPU from the so cket (if present): • If you are r emoving an old CPU, skip to Ste p 3 .
3-27 Cisco UCS C22 Server Inst allation and Service Gu ide OL-26646-01 Chapter 3 Maintaining the Server Installing or Replacing Server Comp onents Step 3 Remove an old CPU: a. Set the Pick-and-Place tool on the CPU in the socket, aligning the arrow on the tool with the registration mark on the socket (the small t riangular mark).
3-28 Cisco UCS C22 Server Insta llation and Service Guide OL-26646-01 Chapter 3 Mainta ining the Se rver Installing or Replacin g Server Components Figur e 3-16 CPU and Pick-and-P lace T ool on P edestal Step 5 Install a new CPU: a. Set the Pick-and-Place tool with CPU over the empty CPU socket on the motherboard.
3-29 Cisco UCS C22 Server Inst allation and Service Gu ide OL-26646-01 Chapter 3 Maintaining the Server Installing or Replacing Server Comp onents c. Apply thermal grease from an included syringe t o the top of the CPU.
3-30 Cisco UCS C22 Server Insta llation and Service Guide OL-26646-01 Chapter 3 Mainta ining the Se rver Installing or Replacin g Server Components – Heat sink cleaning kit (UCSX-HSCK=) – Thermal .
3-31 Cisco UCS C22 Server Inst allation and Service Gu ide OL-26646-01 Chapter 3 Maintaining the Server Installing or Replacing Server Comp onents Replacing the Motherboard RTC Battery War ni ng There is danger of explosion if the battery is replaced i ncorrectly .
3-32 Cisco UCS C22 Server Insta llation and Service Guide OL-26646-01 Chapter 3 Mainta ining the Se rver Installing or Replacin g Server Components Figur e 3-18 Replacing the Motherboard RTC Bat tery Replacing a PCIe Riser The server contains two t oolless PCIe risers for hor izontal installation of PCIe cards.
3-33 Cisco UCS C22 Server Inst allation and Service Gu ide OL-26646-01 Chapter 3 Maintaining the Server Installing or Replacing Server Comp onents c. Remove the top cover as described in “Removing and Replacing the Serv er T op Co ver” section on page 3-7 .
3-34 Cisco UCS C22 Server Insta llation and Service Guide OL-26646-01 Chapter 3 Mainta ining the Se rver Installing or Replacin g Server Components Replacing a PCIe Card Caution Cisco supports all PCIe cards qualified and sold by Ci sco. PCIe cards not qu alified or sold by Cisco are the responsibi lity of the custom er .
3-35 Cisco UCS C22 Server Inst allation and Service Gu ide OL-26646-01 Chapter 3 Maintaining the Server Installing or Replacing Server Comp onents Replacing a PCIe Card Note If you are ins talling a Cisc o UCS V irtual Interfa ce Card, there ar e prerequisite considerat ions.
3-36 Cisco UCS C22 Server Insta llation and Service Guide OL-26646-01 Chapter 3 Mainta ining the Se rver Installing or Replacin g Server Components h. If the card that you replaced was a RAID controller , continue wi th Restoring RAID Configu ration After Replacing a RAID Controller, page C-22 .
3-37 Cisco UCS C22 Server Inst allation and Service Gu ide OL-26646-01 Chapter 3 Maintaining the Server Installing or Replacing Server Comp onents Installing Multiple PCIe Cards and Resolving Limited .
3-38 Cisco UCS C22 Server Insta llation and Service Guide OL-26646-01 Chapter 3 Mainta ining the Se rver Installing or Replacin g Server Components Resolving Insufficient 16-Bit I/O Space The system has only 64 KB of legacy 16-bit I/O resour ces available.
3-39 Cisco UCS C22 Server Inst allation and Service Gu ide OL-26646-01 Chapter 3 Maintaining the Server Installing or Replacing Server Comp onents Replacing an Internal USB Flash Drive The server has one int ernal USB 2.0 sock et on the motherboard that y ou can use with a USB thumb drive for additional storage.
3-40 Cisco UCS C22 Server Insta llation and Service Guide OL-26646-01 Chapter 3 Mainta ining the Se rver Installing or Replacin g Server Components Figur e 3-22 Inter nal USB Flas h Dr iv e Sock et (USB 2.0) Enabling or Disabling th e Internal USB Port The factory default is for all USB ports on the server to be enabled.
3-41 Cisco UCS C22 Server Inst allation and Service Gu ide OL-26646-01 Chapter 3 Maintaining the Server Installing or Replacing Server Comp onents Replacing the SuperCap Power Module (RAID Backup Unit) This server sup ports installa tion of one Supe rCap power m odules (SCPMs).
3-42 Cisco UCS C22 Server Insta llation and Service Guide OL-26646-01 Chapter 3 Mainta ining the Se rver Installing or Replacin g Server Components Figur e 3-23 Replacing an SCPM 1 SCPM bracket PCIe 1.
3-43 Cisco UCS C22 Server Inst allation and Service Gu ide OL-26646-01 Chapter 3 Maintaining the Server Installing or Replacing Server Comp onents Installing a Trusted Platform Module The trusted p latform modu le (TPM) is a smal l circu it board that attaches to a motherboard socket.
3-44 Cisco UCS C22 Server Insta llation and Service Guide OL-26646-01 Chapter 3 Mainta ining the Se rver Installing or Replacin g Server Components Step 4 V erify that the TPM is now enabled. a. W atch during bootup for the F2 prompt, and then p ress F2 to enter BIOS setup.
3-45 Cisco UCS C22 Server Inst allation and Service Gu ide OL-26646-01 Chapter 3 Maintaining the Server Installing or Replacing Server Comp onents Step 1 V erify that a TPM is now installed and enabled in th e server: a.
3-46 Cisco UCS C22 Server Insta llation and Service Guide OL-26646-01 Chapter 3 Mainta ining the Se rver Installing or Replacin g Server Components Replacing a SCU Upgrade ROM Module T o remove and replace a module, use the f ollowing procedure. Step 1 Prepare the server for component installation: a.
3-47 Cisco UCS C22 Server Inst allation and Service Gu ide OL-26646-01 Chapter 3 Maintaining the Server Installing or Replacing Server Comp onents Replacing a Software RAID Key Module T o remove and replace a softwar e RAID key module, use the following procedur e.
3-48 Cisco UCS C22 Server Insta llation and Service Guide OL-26646-01 Chapter 3 Mainta ining the Se rver Installing or Replacin g Server Components Replacing Power Supplies The server has one power supply . • See Power Specifications, page A-2 fo r more information about the support ed power supplies.
A-1 Cisco UCS C22 Server Insta llation and Service Guide OL-26646-01 APPENDIX A Server Specifications This appendix lists t he technical specification s for the server and includ es the following sect.
A-2 Cisco UCS C22 Server Insta llation and Service Guide OL-26646-01 Appendix A Server Sp ecifications Power Specifications Power Specifications The po wer specificatio ns for the two p ower suppl y o.
A-3 Cisco UCS C22 Server Insta llation and Service Guide OL-26646-01 Appendix A Server Spec ifications Environmen tal Specificat ions 650W Power Supply Ta b l e A - 3 lists the specifications fo r each 650W power supply (Cisco par t number UCSC-PSU-650W).
A-4 Cisco UCS C22 Server Insta llation and Service Guide OL-26646-01 Appendix A Server Sp ecifications Environmental Specifications.
B-1 Cisco UCS C22 Server Insta llation and Service Guide OL-26646-01 APPENDIX B Power Cord Specifications This appendix pro vides supp orted pow er cable specif ications. Supported Power Cords and Plugs Each po wer supply has a sep arate po wer cord. Standa rd po wer cords or jumper po wer cords are a vailable for connection to the server .
B-2 Cisco UCS C22 Server Insta llation and Service Guide OL-26646-01 Appendix B Power Cord Specifications Supported Power Cords and Plugs CAB-9K10A- IT Pow er Cord, 250 V A C 10 A CEI 23-16 Plug Italy 8.2 2.5 Figure B-7 CAB-9K10A- SW Pow er Cord, 250 V A C 10 A MP232 Plug Switzerland 8.
B-3 Cisco UCS C22 Server Insta llation and Service Guide OL-26646-01 Appendix B Po wer Cord Specifications Supported Power Cords and Plugs AC Power Cord Illustrations This section includes the A C po wer cord illustrations. See Figure B-1 through Figure B-15 .
B-4 Cisco UCS C22 Server Insta llation and Service Guide OL-26646-01 Appendix B Power Cord Specifications Supported Power Cords and Plugs Figur e B-4 CAB-9K1 0A -EU Figur e B-5 SFS-250V -1 0A -ID Figur e B-6 SFS-250V -1 0A -IS Connector : V S CC15 Cord s et rating: 10A/16 A, 250 V Length: 8 ft 2 in.
B-5 Cisco UCS C22 Server Insta llation and Service Guide OL-26646-01 Appendix B Po wer Cord Specifications Supported Power Cords and Plugs Figur e B-7 CAB-9K1 0A -IT Figur e B-8 CAB-9K1 0A -SW Figur e B-9 CAB-9K1 0A -UK Plug: I/ 3 G (CEI 2 3 -16) Connector C15M (EN60 3 20/C15 ) Cord s et rating: 10 A, 250 V Length: 8 ft 2 in.
B-6 Cisco UCS C22 Server Insta llation and Service Guide OL-26646-01 Appendix B Power Cord Specifications Supported Power Cords and Plugs Figure B-1 0 CAB-AC-250V/13A Figur e B-1 1 CAB-N5K6A -NA Figur e B-12 CAB-9K12A -NA Cord s et rating 1 3 A, 250V (6.
B-7 Cisco UCS C22 Server Insta llation and Service Guide OL-26646-01 Appendix B Po wer Cord Specifications Supported Power Cords and Plugs Figur e B-13 CAB-C13-CBN, Jump er P ow er Cord (0.
B-8 Cisco UCS C22 Server Insta llation and Service Guide OL-26646-01 Appendix B Power Cord Specifications Supported Power Cords and Plugs.
C-1 Cisco UCS C22 Server Insta llation and Service Guide OL-26646-01 APPENDIX C RAID Controller Considerations This appendix contain s the follo wing sections: • Supported RAID Cont rollers and Requ.
C-2 Cisco UCS C22 Server Insta llation and Service Guide OL-26646-01 Appendix C RAID Controller Considerations Supported RAID Cont rollers and Required Cab les Supported RAID Controllers and Required .
C-3 Cisco UCS C22 Server Insta llation and Service Guide OL-26646-01 Appendix C RAID Controller Considerations Mixing Drive Types in RAID Groups Ta b l e C - 2 lists the RAID options for the large form f actor (LFF) version of the serv er .
C-4 Cisco UCS C22 Server Insta llation and Service Guide OL-26646-01 Appendix C RAID Controller Considerations SuperCap Power Module s (RAID Backup Units) SuperCap Power Modules (RAID Backup Units) T his server supp orts installation of one SuperCap power module (SCPM).
C-5 Cisco UCS C22 Server Insta llation and Service Guide OL-26646-01 Appendix C RAID Controller Considerations Embedded RAID Controller Embedded RAID Controller Note VMware ESX/ESXi or any other virtualize d en vironments are not supporte d for use with the embedd ed MegaRAID controller .
C-6 Cisco UCS C22 Server Insta llation and Service Guide OL-26646-01 Appendix C RAID Controller Considerations Embedded RAID Controlle r Notes on Supported Embedded MegaRAID Levels The follo wing RAID le v els are supported by the embedded Me gaRAID control ler .
C-7 Cisco UCS C22 Server Insta llation and Service Guide OL-26646-01 Appendix C RAID Controller Considerations Embedded RAID Controller Installing a SCU Upgrade ROM Modu le For Embedded RAID SAS Support The SCU Upgrade R OM module contains a chip on a small circuit board .
C-8 Cisco UCS C22 Server Insta llation and Service Guide OL-26646-01 Appendix C RAID Controller Considerations Embedded RAID Controlle r Installing a Software RAID Key Module for Embedded RAID 5 Support The software RAID key module cont ains a chip on a small c ircuit bo ard.
C-9 Cisco UCS C22 Server Insta llation and Service Guide OL-26646-01 Appendix C RAID Controller Considerations Embedded RAID Controller Disabling the Embedded RAID Controller in the BIOS Caution Data migration from SW RAID to HW RAID is not sup ported and could result in data loss.
C-10 Cisco UCS C22 Server Insta llation and Service Guide OL-26646-01 Appendix C RAID Controller Considerations Embedded RAID Controlle r • Down loading the LSI Me gaSR Dri v ers, page C-10 • Micr.
C-11 Cisco UCS C22 Server Insta llation and Service Guide OL-26646-01 Appendix C RAID Controller Considerations Embedded RAID Controller Step 3 Prepare the dri vers on a USB thumb dri ve: a.
C-12 Cisco UCS C22 Server Insta llation and Service Guide OL-26646-01 Appendix C RAID Controller Considerations Embedded RAID Controlle r Step 4 On the Dri ver tab, click Update Dri ver to open the Update De vice D riv er wizard, and then follo w the wizard instructions to update t he driv er .
C-13 Cisco UCS C22 Server Insta llation and Service Guide OL-26646-01 Appendix C RAID Controller Considerations Embedded RAID Controller Linux Driver Installation This section e xplains the st eps to install the embedded Me gaRAID de vice d riv er in a Red Hat Enterprise Linux installation o r a SuSE Linux Enterprise Serv er installation.
C-14 Cisco UCS C22 Server Insta llation and Service Guide OL-26646-01 Appendix C RAID Controller Considerations Embedded RAID Controlle r Step 4 If necessary , use this command to change the f ile name of the dri ver update disk to a name with fe wer than eight characters: copy dud-[ driver version ].
C-15 Cisco UCS C22 Server Insta llation and Service Guide OL-26646-01 Appendix C RAID Controller Considerations Embedded RAID Controller Installing the Red Hat Linux Driver For the specif ic supported OS versions, see the Hardware and Software Interoperability Matrix for your server release.
C-16 Cisco UCS C22 Server Insta llation and Service Guide OL-26646-01 Appendix C RAID Controller Considerations Embedded RAID Controlle r Note The noprobe v alues depend on the number of drives.
C-17 Cisco UCS C22 Server Insta llation and Service Guide OL-26646-01 Appendix C RAID Controller Considerations Embedded RAID Controller • T o install from local media: Connect an external USB D VD driv e to the serv er and then insert the first RHEL i nstall disc into the dri ve.
C-18 Cisco UCS C22 Server Insta llation and Service Guide OL-26646-01 Appendix C RAID Controller Considerations RAID Controller Cabling RAID Controller Cabling This section includes the following topi.
C-19 Cisco UCS C22 Server Insta llation and Service Guide OL-26646-01 Appendix C RAID Controller Considerations RAID Controller Cabling Cisco UCS C22 Server Cabling This section contains the following.
C-20 Cisco UCS C22 Server Insta llation and Service Guide OL-26646-01 Appendix C RAID Controller Considerations RAID Controller Cabling LSI MegaRAID 9220-4i PCIe Card This option can control up to four i nternal dri ves. The required UCSC-CABLE-A5 cable kit has two mi ni-SAS cables.
C-21 Cisco UCS C22 Server Insta llation and Service Guide OL-26646-01 Appendix C RAID Controller Considerations RAID Controller Cabling Large Form Factor 4- Drive Backplane Cabling The cable connectio.
C-22 Cisco UCS C22 Server Insta llation and Service Guide OL-26646-01 Appendix C RAID Controller Considerations Restoring RAID Configuration After Replacing a RAID Cont roller Restoring RAID Configuration After Replacing a RAID Controller When you replace a RAID controller , the RAID configuration th at is stored in the controller is lost.
C-23 Cisco UCS C22 Server Insta llation and Service Guide OL-26646-01 Appendix C RAID Controller Considerations For More Information http://www .cisco.
C-24 Cisco UCS C22 Server Insta llation and Service Guide OL-26646-01 Appendix C RAID Controller Considerations For More Information.
D-1 Cisco UCS C22 Server Insta llation and Service Guide OL-26646-01 APPENDIX D Installation for Cisco UCS Integration The Cisco UCS integratio n instructions ha ve been mov ed to the integratio n gui.
D-2 Cisco UCS C22 Server Insta llation and Service Guide OL-26646-01 Appendix D Installati on for Cisco UCS Integration.
デバイスCisco Systems OL-26646-01の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Cisco Systems OL-26646-01をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはCisco Systems OL-26646-01の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Cisco Systems OL-26646-01の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Cisco Systems OL-26646-01で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Cisco Systems OL-26646-01を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はCisco Systems OL-26646-01の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Cisco Systems OL-26646-01に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちCisco Systems OL-26646-01デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。