Cognitive SolutionsメーカーB780の使用説明書/サービス説明書
ページ先へ移動 of 192
P r ogr amming Guide A776 (B780) T w o -Color T hermal/Impac t Hybrid Prin ter Includes Cognitiv eTPG L ogoEZ ® colorization inf ormation Made under one or more of the following U .
Feder al Communications Commission (FC C) Radio Frequency Interference Statement Warning . Changes or modications to this unit not expressly appr oved by the party responsible for compliance c ould void the user’ s authority to operate the equipmen t.
Cont ents A776-PG00001 C 12/09 A776 (B780) Prog ramming Guide i C ontents Chapter 1: About this Guide .............................................................................................................................. 1 How to use this Guide .
Cont ents ii A776 (B780) Prog ramming Guide A776-PG00001 C 12/09 A776 Congur able Slip Commands .................................................................................................... 14 A776 Double High Slip Character Print ..........
Cont ents A776-PG00001 C 12/09 A776 (B780) Prog ramming Guide iii V ertic al and horiz ontal positioning ........................................................................................... 30 T ext characteristics .............................
Cont ents iv A776 (B780) Prog ramming Guide A776-PG00001 C 12/09 Print and paper feed ..................................................................................................................... 44 Print and f eed paper one line .............
Cont ents A776-PG00001 C 12/09 A776 (B780) Prog ramming Guide v T ext strike -through mode ( ColorPOS ® ) ........................................................................................................... 63 Select font ID number ...........
Cont ents vi A776 (B780) Prog ramming Guide A776-PG00001 C 12/09 Real-time commands .................................................................................................................... 89 Pref erred implementation .....................
Cont ents A776-PG00001 C 12/09 A776 (B780) Prog ramming Guide vii Exception table entry format............................................................................................................................. 120 Maintaining the exception table .
Cont ents viii A776 (B780) Prog ramming Guide A776-PG00001 C 12/09 W ait for Scan & Optionally T ransmit ........................................................................................... 138 T ransmit Image ..............................
Cont ents A776-PG00001 C 12/09 A776 (B780) Prog ramming Guide ix Underline O ........................................................................................................................................................... 152 Double -High O .
Cont ents x A776 (B780) Prog ramming Guide A776-PG00001 C 12/09.
Chapter 1: About this Guide A776-PG00001 C 12/09 A776 (B780) Prog ramming Guide 1 Chapter 1: A bout this G uide How t o use this Guide This guide provides pr ogramming information on Cog nitive TPG’ s A776 (and B780) printer .
Chapter 1: About this Guide 2 A776 (B780) Prog ramming Guide A776-PG00001 C 12/09.
Chapter 2: Print er Status, Ethernet and Indicators 3 A776-PG00001 C 12/09 A776 (B780) Prog ramming Guide Chapter 2: P rinter Sta tus and Indic a tors The A776/B780 printer performs a number of diagnostics that provide useful inf ormation about the operating status of the printer .
Chapter 2: Print er Status, Ethernet and Indicators 4 A776 (B780) Prog ramming Guide A776-PG00001 C 12/09 For mor e information about See this section Acc essing the remote diagnostic tallies “ Comm.
Chapter 2: Print er Status, Ethernet and Indicators 5 A776-PG00001 C 12/09 A776 (B780) Prog ramming Guide Ethernet Default Setup T o return the printer to the default settings, put the print er in the boot mode and hold down the feed switch until y ou hear the high-low-high tones (about 10 seconds).
Chapter 2: Print er Status, Ethernet and Indicators 6 A776 (B780) Prog ramming Guide A776-PG00001 C 12/09 Indicators The printer communicat es various conditions both visually , with two green lights or audibly , with a series of tones or beeps. The following table lists these indicators .
Chapter 3: Migrating to a ne w printer A776-PG00001 C 12/09 A776 (B780) Prog ramming Guide 7 Migrating fr om existing C ognitive TPG printers The A776 printer is the fourth generation two station h ybrid thermal/impac t printer with f eature enhancements designed to pro vide the most desirable options to the customer .
Chapter 3: Migrating to a ne w printer 8 A776 (B780) Prog ramming Guide A776-PG00001 C 12/09 Moving from the A756 t o the A776 ( Thermal prin thead dierenc es) The follo wing table details the list of commands whose behavior diers between the A756 printer and the A758, A760, and A776 printers.
Chapter 3: Migrating to a ne w printer A776-PG00001 C 12/09 A776 (B780) Prog ramming Guide 9 Moving from the A756, A758, or A760 t o the A776 (Slip dierenc es) The impact station print zone on the A760 is 4.7 inches wide and the print zone on the A776 is 3.
Chapter 3: Migrating to a ne w printer 10 A776 (B780) Prog ramming Guide A776-PG00001 C 12/09 A776 Emulation C ommands Set Printer ID Mode Code (Hexadecimal) 1F 03 0C n This command is ignor ed. A776 C onguration C ommands Select Slip Lines per Inch Code (Hexadecimal) 1F 03 25 04 n This command sets the slip station lines per inch setting .
Chapter 3: Migrating to a ne w printer A776-PG00001 C 12/09 A776 (B780) Prog ramming Guide 11 Select A776 Narrow Slip Congur ation Option to Ignore n Leading Spaces Code (Hexadecimal) 1F 03 25 08 n This command is available so A760 applica tions can ignore n leading spaces in a 42-column line of text.
Chapter 3: Migrating to a ne w printer 12 A776 (B780) Prog ramming Guide A776-PG00001 C 12/09 Select A776 (21 and 25-line) Rotated Slip Print Options Code (Hexadecimal) 1F 03 25 0C n 21-line rotated t ex t print ac commodates existing applications, which print 21 or f ewer rotated lines (as r ead).
Chapter 3: Migrating to a ne w printer A776-PG00001 C 12/09 A776 (B780) Prog ramming Guide 13 Set Page Mode Margin Mechanical Adjustment Code (Hexadecimal) 1F 03 25 16 n · This command applies to both the A776 and the B780, although it is primarily implemented f or B780 printers replacing existing A721 printers t o match cashier check printing.
Chapter 3: Migrating to a ne w printer 14 A776 (B780) Prog ramming Guide A776-PG00001 C 12/09 A776 Congur able Slip Commands A776 Double High Slip Character Print Code (Hexadecimal) Command 1F 03 2.
Chapter 3: Migrating to a ne w printer A776-PG00001 C 12/09 A776 (B780) Prog ramming Guide 15 Moving from A756/A758 t o A776 T w o -color C ommands The follo wing table details the list of commands related to two-color printing and ColorPOS ® functionality that was not available on the A756 or the A758.
Chapter 3: Migrating to a ne w printer 16 A776 (B780) Prog ramming Guide A776-PG00001 C 12/09 LogoEZ ® c olorization commands Hexadecimal ASCII Discription Page 1F 03 16 f s p/r t US E TX SYN f s p/r.
Chapter 3: Migrating to a ne w printer A776-PG00001 C 12/09 A776 (B780) Prog ramming Guide 17 B780 Emulation C ommands Set Printer ID Mode Code (Hexadecimal) 1F 03 0Ch This command sets the printer ID.
Chapter 3: Migrating to a ne w printer 18 A776 (B780) Prog ramming Guide A776-PG00001 C 12/09 · F or text printing, these are the A721 internal dip switch settings: 3.2 3.3 3.4 Right Margin T ext T ext Columns OFF OFF OFF .5” 33/40 OFF OFF ON .3” 33/40 OFF ON OFF .
Chapter 3: Migrating to a ne w printer A776-PG00001 C 12/09 A776 (B780) Prog ramming Guide 19 Select T wo - Sensor Option for B780 Code (Hexadecimal) 1F 03 25 05 n This command sets the two-sensor option for the B780 mode. When enabled, two distinct slip sensor statuses are reported.
Chapter 3: Migrating to a ne w printer 20 A776 (B780) Prog ramming Guide A776-PG00001 C 12/09 Select B780 M ap L ogo Option for B780 Code (Hexadecimal) 1F 03 25 10 n This command selects the B780 map logo option. This is available f or A721 applications that rely on printing logos on the receipt.
Chapter 3: Migrating to a ne w printer A776-PG00001 C 12/09 A776 (B780) Prog ramming Guide 21 Select Cover Open Option for B780 Set Page Mode Margin Mechanical Adjustment Code (Hexadecimal) 1F 03 25 1.
Chapter 3: Migrating to a ne w printer 22 A776 (B780) Prog ramming Guide A776-PG00001 C 12/09.
Chapter 4: Progr amming the Printer 23 A776-PG00001 C 12/09 A776 (B780) Prog ramming Guide Chapter 4: P rogramming the P rinter Overview of Printing Char ac teristics Commands contr ol all operations and functions of the printer .
Chapter 4: Progr amming the Printer 24 A776 (B780) Prog ramming Guide A776-PG00001 C 12/09 Character appearanc e The appearance of te x t can be changed using the f ollowing print modes: • Standa.
Chapter 4: Progr amming the Printer 25 A776-PG00001 C 12/09 A776 (B780) Prog ramming Guide Print z ones Print z ones for receipt sta tion 80 mm paper Specications of print zone for r eceipt station.
Chapter 4: Progr amming the Printer 26 A776 (B780) Prog ramming Guide A776-PG00001 C 12/09 Print z ones for slip station The slip station prints characters (standard and compressed pitch) and g raphics in a print zone of 77mm (3.0”) wide on a slip or form.
Chapter 4: Progr amming the Printer 27 A776-PG00001 C 12/09 A776 (B780) Prog ramming Guide V alidation F ormat The A776 has drop validation printing . The location of the rst line of validation varies based on the table below: Number of lines of validation @ 7.
Chapter 4: Progr amming the Printer 28 A776 (B780) Prog ramming Guide A776-PG00001 C 12/09 Rotated prin ting commands Three commands c ontrol the rotation of printing . T he table shows the combinations of set/cancel upside down print, set/cancel rotated print (clockwise), and rota ted print (counterclockwise).
Chapter 5: Progr amming commands 29 A776-PG00001 C 12/09 A776 (B780) Prog ramming Guide Chapter 5: P rogramming C ommands C ommands listed by function Commands in bold are C olorPOS ® commands.
Chapter 5: Progr amming commands 30 A776 (B780) Prog ramming Guide A776-PG00001 C 12/09 Print and paper f eed Code (he xadecimal) Command Page 0A Print and f eed paper one line 44 0C Print and eject s.
Chapter 5: Progr amming commands 31 A776-PG00001 C 12/09 A776 (B780) Prog ramming Guide 1B 2D n Select or cancel underline mode 57 1B 3A 30 30 30 Copy character set from ROM t o RAM 57 1B 3F n Cancel .
Chapter 5: Progr amming commands 32 A776 (B780) Prog ramming Guide A776-PG00001 C 12/09 1D 84 m n 1 n 2 d 1 …dx Download logo image 70 1D 86 m Monochrome shade mode 71 1D 87 m Color shade mode 71 1D.
Chapter 5: Progr amming commands 33 A776-PG00001 C 12/09 A776 (B780) Prog ramming Guide Bar codes Code (he xadecimal) Command Page 1D 48 n Select printing position for HRI characters 100 1D 66 n Select pitch for HRI char ac t ers 100 1D 68 n Select bar code height 100 1D 6B m d1…dk 00 Print bar code 100 or 1D 6B m n d1…dn 1D 6B m nL nH d1.
Chapter 5: Progr amming commands 34 A776 (B780) Prog ramming Guide A776-PG00001 C 12/09 User da ta storage Code (he xadecimal) Command Page 1B 27 m a0 a1 a2 d1…dm Write to user da ta storage 121 1B .
Chapter 5: Progr amming commands 35 A776-PG00001 C 12/09 A776 (B780) Prog ramming Guide Image Commands Code (he xadecimal) Command 1D B0 Calibrate Scanner 132 1D B1 m n Congure/Change Image Transmi.
Chapter 5: Progr amming commands 36 A776 (B780) Prog ramming Guide A776-PG00001 C 12/09 C ommand con ventions The follo wing information describes how each command is organized: Name: Name of command. ASCII: The ASCII c ontrol code. Hexadecimal: The hexadecimal control c ode.
Chapter 5: Progr amming commands 37 A776-PG00001 C 12/09 A776 (B780) Prog ramming Guide Close form ASCII: DC1 Hexadecimal: 11 Decimal: 17 Closes the feed roller and pla ten (forms compensation arm assembly). If the printer is reset or the Clear (0x10) is received , the feed roller and platen ar e opened.
Chapter 5: Progr amming commands 38 A776 (B780) Prog ramming Guide A776-PG00001 C 12/09 Select p eripher al device (for multi-drop) ASCII ESC = n Hexadecimal 1B 3D n Decimal 27 61 n V alue of n : bits.
Chapter 5: Progr amming commands 39 A776-PG00001 C 12/09 A776 (B780) Prog ramming Guide Select receipt or slip for printing; slip for MICR r ead ASCII ESC c 0 n Hexadecimal 1B 63 30 n Decimal 27 99 48 n V alue of n: 1, 2, 3 R ec eipt selec t ed 4 Slip selected 8 Validation station selected Default of n: 1 Selects the station for printing.
Chapter 5: Progr amming commands 40 A776 (B780) Prog ramming Guide A776-PG00001 C 12/09 Select sensors to stop printing ASCII ESC c 4 n Hexadecimal 1B 63 34 n Decimal 27 99 52 n V alue of n: Sensor st.
Chapter 5: Progr amming commands 41 A776-PG00001 C 12/09 A776 (B780) Prog ramming Guide Generate pulse to open cash dr awer ASCII ESC p n p 1 p 2 Hexadecimal 1B 70 n p 1 p 2 Decimal 27 112 n p 1 p 2 V.
Chapter 5: Progr amming commands 42 A776 (B780) Prog ramming Guide A776-PG00001 C 12/09 Description When the monochrome paper type command (00) is set, this command is r ecognized and retained but has no e ec t. The monochrome paper selection (usually black) controls the output .
Chapter 5: Progr amming commands 43 A776-PG00001 C 12/09 A776 (B780) Prog ramming Guide 4 = Tw o -color (blue/black) papers (Kanzaki P-320BB) 5 = T wo- color (r ed/black) papers (K anzaki P-320PB) Def.
Chapter 5: Progr amming commands 44 A776 (B780) Prog ramming Guide A776-PG00001 C 12/09 Print test f orm ASCII US t Hexadecimal 1F 74 Decimal 31 116 Prints the current print er conguration settings on the receipt.
Chapter 5: Progr amming commands 45 A776-PG00001 C 12/09 A776 (B780) Prog ramming Guide F eed n dot rows ASCII NAK n Hexadecimal 15 n Decimal 21 n V alue of n: Receipt - n /203 inch Slip - n /72 inch Range of n: 0–127 in A756 emulation 0–255 in A758 emulation and A776 native mode F eeds paper n dot rows without printing.
Chapter 5: Progr amming commands 46 A776 (B780) Prog ramming Guide A776-PG00001 C 12/09 Print ASCII ETB Hexadecimal 17 Decimal 23 Prints one line from the bu er and feeds paper one line.
Chapter 5: Progr amming commands 47 A776-PG00001 C 12/09 A776 (B780) Prog ramming Guide Print and re verse feed n lines ASCII ESC e n Hexadecimal 1B 65 n Decimal 27 101 n V alue of n : The number of lines on the slip station to be reverse fed .
Chapter 5: Progr amming commands 48 A776 (B780) Prog ramming Guide A776-PG00001 C 12/09 Set column ASCII ESC DC4 n Hexadecimal 1B 14 n Decimal 27 20 n V alue of n: Receipt - 1–44 = Standard pitch 1.
Chapter 5: Progr amming commands 49 A776-PG00001 C 12/09 A776 (B780) Prog ramming Guide Set vertical line spacing ASCII ESC 3 n Hexadecimal 1B 33 n Decimal 27 51 n V alue of n: Receipt - n /406 inch Slip - n /144 inch Range of n: 0 – 255 Default: Receipt - 0.
Chapter 5: Progr amming commands 50 A776 (B780) Prog ramming Guide A776-PG00001 C 12/09 Set relative prin t position ASCII ESC n 1 n 2 Hexadecimal 1B 5C n 1 n 2 Decimal 27 92 n 1 n 2 V alue of n: T o.
Chapter 5: Progr amming commands 51 A776-PG00001 C 12/09 A776 (B780) Prog ramming Guide Select justic a tion ASCII ESC a n Hexadecimal 1B 61 n Decimal 27 97 n V alue of n: 0, 48 = Left aligned 1, 4.
Chapter 5: Progr amming commands 52 A776 (B780) Prog ramming Guide A776-PG00001 C 12/09 Continued . . . T o set the Slip left margin to one inch at the default horizontal motion unit of 1/140 inches ,.
Chapter 5: Progr amming commands 53 A776-PG00001 C 12/09 A776 (B780) Prog ramming Guide Or , to set the width of the printing area to two inches at the default horizontal motion unit of 1/203 units per inch, send the four-byt e string: GS W 150 1 Where 2 inches = 406/203, and 406 = (1 X 256) + 150.
Chapter 5: Progr amming commands 54 A776 (B780) Prog ramming Guide A776-PG00001 C 12/09 Select pitch (column width) ASCII ESC SYN n Hexadecimal 1B 16 n Decimal 27 22 n V alue of n: 0 = Standard pitch 1 = Compressed pitch Default: 0 (Standard pitch) Selects the charac t er pitch for a print line.
Chapter 5: Progr amming commands 55 A776-PG00001 C 12/09 A776 (B780) Prog ramming Guide Select print mode ASCII ESC ! n Hexadecimal 1B 21 n Decimal 27 33 n V alue of n: Pitch selection (standard, compr essed, double -high, or double-wide.
Chapter 5: Progr amming commands 56 A776 (B780) Prog ramming Guide A776-PG00001 C 12/09 Dene user-dened character set ASCII ESC & s c1 c2 [ character 1 data] ... [character k data] Hexadecimal 1B 26 s c1 c2 [character 1 data] ... [character k data] Decimal 27 38 s c1 c2 [ character 1 data] .
Chapter 5: Progr amming commands 57 A776-PG00001 C 12/09 A776 (B780) Prog ramming Guide Each character is dened by 12 bytes (only byt es 2–11 are printed.) Each byte is one column (full- or half-dot column.) Overlapped dots are not printed. The data must contain [( c 2 - c 1 + 1) x 12] b ytes.
Chapter 5: Progr amming commands 58 A776 (B780) Prog ramming Guide A776-PG00001 C 12/09 Cancel user-dened character ASCII ESC ? n Hexadecimal 1B 3F n Decimal 27 63 n V alue of n : Specied character code. Range of n: 32–255 Cancels the pattern dened f or the character code specied by n.
Chapter 5: Progr amming commands 59 A776-PG00001 C 12/09 A776 (B780) Prog ramming Guide Exc eptions The settings do not apply in page mode, How ever they can be set or cleared in page mode. Double -strike printing cannot be used with bit-images or do wnloaded bit-images.
Chapter 5: Progr amming commands 60 A776 (B780) Prog ramming Guide A776-PG00001 C 12/09 Default: 0 (Code Page 437) Selects the charac t er set to be used. Look in “ Appendix B: Resident Character Sets” for the character sets. There ar e t w o codes for this command (see select international character set, 1B 74 n ).
Chapter 5: Progr amming commands 61 A776-PG00001 C 12/09 A776 (B780) Prog ramming Guide Character width selection Hex Decimal W idth 00 0 1 (normal) 10 16 2 (t w o times width) 20 32 3 (three times wi.
Chapter 5: Progr amming commands 62 A776 (B780) Prog ramming Guide A776-PG00001 C 12/09 T urns on white/black rev erse print mode. In white/black reverse print mode , print dots and non-print dots are rev ersed, which means that white characters are printed on a black backg round.
Chapter 5: Progr amming commands 63 A776-PG00001 C 12/09 A776 (B780) Prog ramming Guide T ext strike-through mode (C olorPOS ® ) ASCII GS 0x85 m n Hexadecimal 1D 8D n m Decimal 29 141 n m V alue of m.
Chapter 5: Progr amming commands 64 A776 (B780) Prog ramming Guide A776-PG00001 C 12/09 Save f ont ID number as default font at pow er up ASCII GS 0xF0 0x03 Hexadecimal 1D F0 03 Decimal 29 240 3 Save current f ont ID number as default font at pow er up.
Chapter 5: Progr amming commands 65 A776-PG00001 C 12/09 A776 (B780) Prog ramming Guide Dene extended user-dened character set ASCII US & s c1 c2 [ character 1 data] ... [character k data] Hexadecimal 1F 26 s c1 c2 [character 1 data] ... [character k data] Decimal 31 38 s c1 c2 [ character 1 data] .
Chapter 5: Progr amming commands 66 A776 (B780) Prog ramming Guide A776-PG00001 C 12/09 Graphics These commands are used t o enter and print graphics data and are described in order of their hexadecimal codes. Download BMP logo ASCII: ESC (+*.BMP le) Hexadecimal: 1B (+*.
Chapter 5: Progr amming commands 67 A776-PG00001 C 12/09 A776 (B780) Prog ramming Guide Slip Station V alue of m Mode No . of dots (vertical) No . of dots (horizontal) 0 8-Dot single -density 8 (72 DP.
Chapter 5: Progr amming commands 68 A776 (B780) Prog ramming Guide A776-PG00001 C 12/09 Select double -densit y gr aphics ASCII ESC Y n 1 n 2 d 1 ... d n Hexadecimal 1B 59 n 1 n 2 d 1 ... d n Decimal 27 89 n 1 n 2 d 1 ... d n Equivalent to 1B 2A m=1 n 1 n 2 d 1 .
Chapter 5: Progr amming commands 69 A776-PG00001 C 12/09 A776 (B780) Prog ramming Guide In the case of a new application using multiple logos, the select current logo (1D 23 n ) command is used. After that , the printer no longer automatically erases the logo denition ash memory page when it lls with multiple denitions.
Chapter 5: Progr amming commands 70 A776 (B780) Prog ramming Guide A776-PG00001 C 12/09 Print r aster monochrome graphics ( ColorPOS ® ) ASCII GS 0x82 n1…..n72 (576 dots) f or 80 mm paper , or n80 (640 dots) for 82.5 mm paper Hexadecimal 1D 82 n1….
Chapter 5: Progr amming commands 71 A776-PG00001 C 12/09 A776 (B780) Prog ramming Guide Monochrome shade mode (C olorPOS ® ) ASCII GS 0x86 m Hexadecimal 1D 86 m Decimal 29 134 m This applies a selected shade density to all monochrome objects such as text and monochrome logos.
Chapter 5: Progr amming commands 72 A776 (B780) Prog ramming Guide A776-PG00001 C 12/09 Logo print with color plane sw ap (C olorPOS ® ) ASCII GS 0x89 n m Hexadecimal 1D 89 n m Decimal 29 137 n m This command will print logo n . The command is ignored if a logo with index n has not been dened.
Chapter 5: Progr amming commands 73 A776-PG00001 C 12/09 A776 (B780) Prog ramming Guide F orm and merge real-time surround graphic ( ColorPOS ® ) ASCII GS 0x90 m x y o p q Hexadecimal 1D 90 m x y o p q Decimal 29 144 m x y o p q This command will print a real-time g raphic style designated by m .
Chapter 5: Progr amming commands 74 A776 (B780) Prog ramming Guide A776-PG00001 C 12/09 Save gr aphics buer as logo (C olorPOS ® ) ASCII GS 0x91 n Hexadecimal 1D 91 n Decimal 29 145 n This command will sav e all the raster data that is in the working graphics buer (wher e surround graphics are formed) as a logo with index value n .
Chapter 5: Progr amming commands 75 A776-PG00001 C 12/09 A776 (B780) Prog ramming Guide Apply margin message mode ( ColorPOS ® ) ASCII GS 0x99 l m n o Hexadecimal 1D 99 l m n o Decimal 29 153 l m n o.
Chapter 5: Progr amming commands 76 A776 (B780) Prog ramming Guide A776-PG00001 C 12/09 Logo print with knife cut ASCII GS 0x9B m n Hexadecimal 1D 9B m n Decimal 29 155 m n V alue of m: 0 = Standard s.
Chapter 5: Progr amming commands 77 A776-PG00001 C 12/09 A776 (B780) Prog ramming Guide Set LogoEZ ® colorization ( ColorPOS ® ) ASCII US ETX SYN f s p/t t Hexadecimal 1F 03 16 f s p/t t Decimal 31 .
Chapter 5: Progr amming commands 78 A776 (B780) Prog ramming Guide A776-PG00001 C 12/09 Example: Activate wat ermar k printing using logo #F1 (1F 03 16 02 s r ) with “ s ” being the skip distance in dot rows bef ore activation and “r ” is the distance in mm between watermark repetitions .
Chapter 5: Progr amming commands 79 A776-PG00001 C 12/09 A776 (B780) Prog ramming Guide f = 4 link logo print bef ore cut Prints a logo after the skip distance of “ s ” before a logo and “ p ” past a logo and per forms a knife cut (1F 03 16 04 s p ).
Chapter 5: Progr amming commands 80 A776 (B780) Prog ramming Guide A776-PG00001 C 12/09 Original attribute mapped table m bit on attribute mapped 0 B old 1 I talic 2 Reverse 3 Underline 4 Double high .
Chapter 5: Progr amming commands 81 A776-PG00001 C 12/09 A776 (B780) Prog ramming Guide Related informa tion This command is utilized in the C ognitive TPG LogoEZ ® utility . The utility can be used to pre -congure new printers with a default colorization set-up without requiring an y application changes.
Chapter 5: Progr amming commands 82 A776 (B780) Prog ramming Guide A776-PG00001 C 12/09 Status Status command in troduction The A776 has three methods of pr oviding status to the application. These methods are through ba tch status commands, r eal time status commands and unsolicited status mode.
Chapter 5: Progr amming commands 83 A776-PG00001 C 12/09 A776 (B780) Prog ramming Guide T ransmit paper sensor status ASCII ESC v Hexadecimal 1B 76 Decimal 27 118 V alues: Status Byte ( A776 only) Bit.
Chapter 5: Progr amming commands 84 A776 (B780) Prog ramming Guide A776-PG00001 C 12/09 T ransmits the printer ID specied by n as f ollows: n Printer ID Specication ID (He xadecimal) 1, 49 Print.
Chapter 5: Progr amming commands 85 A776-PG00001 C 12/09 A776 (B780) Prog ramming Guide T ransmit printer ID , remote diagnostics extension ASCII GS I @ n Hexadecimal 1D 49 40 n Decimal 29 73 64 n V alues of n: R ef er to table Range of n : 32–255 (not all dened but reser v ed) Pref orms the remote diagnostic function specied by n .
Chapter 5: Progr amming commands 86 A776 (B780) Prog ramming Guide A776-PG00001 C 12/09 V alue of n ASCII He x Dec Remote diagnostic item F unc tion é 82 130 R ec eipt lines tally Clear receipt lines.
Chapter 5: Progr amming commands 87 A776-PG00001 C 12/09 A776 (B780) Prog ramming Guide V alue of n ASCII He x Dec Remote diagnostic item F unc tion » AF 175 Cover openings tally R eturn co ver openi.
Chapter 5: Progr amming commands 88 A776 (B780) Prog ramming Guide A776-PG00001 C 12/09 Printer sta tus ( n = 1 or n = 49) Bit O /On Hex Decimal Status for tr ansmit status 0 O 00 0 Receipt paper adequate. On 01 1 Receipt paper low . 1 O 00 0 Receipt paper adequate.
Chapter 5: Progr amming commands 89 A776-PG00001 C 12/09 A776 (B780) Prog ramming Guide Flash memory user sector status ( n = 4 or n = 52) Bit O /On Hex Decimal Status for tr ansmit status 0 – – – Undened. Fixed t o o. 1 – – – Undened.
Chapter 5: Progr amming commands 90 A776 (B780) Prog ramming Guide A776-PG00001 C 12/09 Pref erred implementation F or a new application the GS (1D) sequences are rec ommended to avoid possible misinterpreta tion of a DLE (0x10) sequence as a clear printer (0x10 0, ASCII DLE NUL) command .
Chapter 5: Progr amming commands 91 A776-PG00001 C 12/09 A776 (B780) Prog ramming Guide T o guard against this situation, the application must determine the cause of a busy condition and take appr opriate action or pace the real time commands to av oid lling the buer .
Chapter 5: Progr amming commands 92 A776 (B780) Prog ramming Guide A776-PG00001 C 12/09 2 = T ransmit RS-232C Busy Status Bit Status Hex Decimal F unc tion 0 O 00 0 Fix ed to o . 1 On 02 2 F ixed to on. 2 O 00 0 Receipt and cassette cover closed.
Chapter 5: Progr amming commands 93 A776-PG00001 C 12/09 A776 (B780) Prog ramming Guide 4 = T ransmit receipt paper sta tus Bit Status Hex Decimal F unc tion 0 O 00 0 Fix ed to o 1 On 02 2 F ix.
Chapter 5: Progr amming commands 94 A776 (B780) Prog ramming Guide A776-PG00001 C 12/09 Real-time request to printer GS sequence DLE sequence ASCII GS ETX n DLE ENQ n Hexadecimal 1D 03 n 10 05 n 29 3 .
Chapter 5: Progr amming commands 95 A776-PG00001 C 12/09 A776 (B780) Prog ramming Guide Real-time printer status tr ansmission ASCII GS ENQ Hexadecimal 1D 05 Decimal 29 5 T ransmits one byte status of the printer in r eal time. 0 O 00 0 Paper adequa te.
Chapter 5: Progr amming commands 96 A776 (B780) Prog ramming Guide A776-PG00001 C 12/09 Unsolicited status mode Select or c anc el unsolicited status mode (USM) ASCII: GS a n Hexadecimal: 1D 61 n Deci.
Chapter 5: Progr amming commands 97 A776-PG00001 C 12/09 A776 (B780) Prog ramming Guide First Byt e (printer Information) Bit O/On Hex Decimal Status for USM 0 O 00 0 Not used. F ixed to o. 1 O 00 0 Not used. F ixed to o. 2 O 00 0 One or both cash dra wers open.
Chapter 5: Progr amming commands 98 A776 (B780) Prog ramming Guide A776-PG00001 C 12/09 Third b yte (paper sensor information) Bit O/On Hex Decimal Status for USM 0 O 00 0 Receipt paper adequate.
Chapter 5: Progr amming commands 99 A776-PG00001 C 12/09 A776 (B780) Prog ramming Guide Fourth byte (paper sensor informa tion) -- B780 Bit O/On Hex Decimal Status for USM 0 O 00 0 Slip paper se.
Chapter 5: Progr amming commands 100 A776 (B780) Prog ramming Guide A776-PG00001 C 12/09 Bar codes These commands format and print bar c odes and are described in order of their hexadecimal codes.
Chapter 5: Progr amming commands 101 A776-PG00001 C 12/09 A776 (B780) Prog ramming Guide Rotated barcodes set with small modules (select bar code width command 1D 77 n , with n = 1 or 2) and PDF 417 barcodes in an y orientation are printed at low speed, f or better readability .
Chapter 5: Progr amming commands 102 A776 (B780) Prog ramming Guide A776-PG00001 C 12/09 m Bar c ode d1...dn n 70 Interleaved 2 of 5 (ITF) 48–57 V ariable (even number) 30-39 71 COD ABAR (NW-7) 65.
Chapter 5: Progr amming commands 103 A776-PG00001 C 12/09 A776 (B780) Prog ramming Guide Print GS1 DataBar (f ormerly RSS), data length specied ASCII GS k m nL nH d1.
Chapter 5: Progr amming commands 104 A776 (B780) Prog ramming Guide A776-PG00001 C 12/09 Print multiple barc odes ASCII GS k Hexadecimal 1D 6B FF n Decimal 29 108 255 All the individual barcode strings start with 1D 6B m, where m is the type of barcode.
Chapter 5: Progr amming commands 105 A776-PG00001 C 12/09 A776 (B780) Prog ramming Guide Select PDF 417 parameters ASCII GS p a b c d e f Hexadecimal 1D 70 a b c d e f Decimal 29 112 a b c d e f V alue and Ranges: V alue: Ranges: Description: a, b = The ratio of bar height to symbol length.
Chapter 5: Progr amming commands 106 A776 (B780) Prog ramming Guide A776-PG00001 C 12/09 Each row has a left and right row indica tor with a data region between. The lef t -most character in the top row of the data region is the total number of char ac t ers in the data region, excluding err or correction characters.
Chapter 5: Progr amming commands 107 A776-PG00001 C 12/09 A776 (B780) Prog ramming Guide Slip page mode considera tions Suggested command sequenc e to print bank check 1B 40 reset to power-on paramete.
Chapter 5: Progr amming commands 108 A776 (B780) Prog ramming Guide A776-PG00001 C 12/09 Page mode congur ations The original implementation of P age Mode on the slip station mapped thermal dots to impact dots, and sometimes produced output that was not ac ceptable to customers.
Chapter 5: Progr amming commands 109 A776-PG00001 C 12/09 A776 (B780) Prog ramming Guide Select page mo de ASCII ESC L Hexadecimal 1B 4C Decimal 27 76 Switches from standar d mode to page mode.
Chapter 5: Progr amming commands 110 A776 (B780) Prog ramming Guide A776-PG00001 C 12/09 Select standard mode ASCII ESC S Hexadecimal 1B 53 Decimal 27 83 Switches from page mode t o standard mode.
Chapter 5: Progr amming commands 111 A776-PG00001 C 12/09 A776 (B780) Prog ramming Guide Set print area in page mode ASCII ESC W n1, n2 ...n8 Hexadecimal 1B 57 n1, n2 .
Chapter 5: Progr amming commands 112 A776 (B780) Prog ramming Guide A776-PG00001 C 12/09 Maximum area specication in page mode Maximizing the possible area in page mode consumes almost all of free RAM. Without any free RAM, bitmap r otations and enlargements cannot be performed.
Chapter 5: Progr amming commands 113 A776-PG00001 C 12/09 A776 (B780) Prog ramming Guide Formulas The distance from the curr ent position is set to ( nL + nH × 256) × vertical or horizontal motion unit] inches. The amount of movement is calculat ed only for the paper roll.
114 A776 (B780) Prog ramming Guide A776-PG00001 C 12/09 Chapter 5: Progr amming commands Formulas The waiting time is t × 100 ms for ev er y macro e xecution.
Chapter 5: Progr amming commands 115 A776-PG00001 C 12/09 A776 (B780) Prog ramming Guide T ransmit last MICR read ASCII : ESC w R Hexadecimal : 1B 77 52 Decimal: 27 119 82 Resends the previously decoded MICR data (as if the parsing has not been dened) to the host.
Chapter 5: Progr amming commands 116 A776 (B780) Prog ramming Guide A776-PG00001 C 12/09 Examples of variable length eld format specications Accoun t #, all charac t ers in the eld, keep spac.
Chapter 5: Progr amming commands 117 A776-PG00001 C 12/09 A776 (B780) Prog ramming Guide Sample parsing formats The follo wing strings show various sample formats that you can use assuming they meet your parsing f ormat needs. Included with the sample format is a description of the data that is returned to the application.
Chapter 5: Progr amming commands 118 A776 (B780) Prog ramming Guide A776-PG00001 C 12/09 ESC w p T ‘/ A ‘/ C ‘/ S <CR> • All characters in the transit number • Field separ ator: .
Chapter 5: Progr amming commands 119 A776-PG00001 C 12/09 A776 (B780) Prog ramming Guide Once a parsing format is specied , the following values are r eturned: MICR characters ASCII Hexadecimal Numerics 0 .
Chapter 5: Progr amming commands 120 A776 (B780) Prog ramming Guide A776-PG00001 C 12/09 In this example, without an exc eption table entr y , the rmware would alway s pick the rightmost four-digit number as the check serial number following rule two abov e.
Chapter 5: Progr amming commands 121 A776-PG00001 C 12/09 A776 (B780) Prog ramming Guide After the right transit symbol are immediat ely the four characters of the check serial #, followed immediat ely by the ten characters of the account number .
Chapter 5: Progr amming commands 122 A776 (B780) Prog ramming Guide A776-PG00001 C 12/09 Read from user data stor age ASCII ESC 4 m a0 a1 a2 Hexadecimal 1B 34 m a0 a1 a2 Decimal 27 52 m a0 a1 a2 V alue of m : 0 – 255 Reads m bytes of data from the user da ta storage ash page at the address specied.
Chapter 5: Progr amming commands 123 A776-PG00001 C 12/09 A776 (B780) Prog ramming Guide n = 51 (ASCII n = 3) HEX 33 Loads user-dened characters to ash memory. An application must use this c ommand to store user-dened characters in ash memory.
Chapter 5: Progr amming commands 124 A776 (B780) Prog ramming Guide A776-PG00001 C 12/09 V alues and ranges: s = the number of dot rows in the char ac ter c ell (maximum 64) c = the ASCII codes of the.
Chapter 5: Progr amming commands 125 A776-PG00001 C 12/09 A776 (B780) Prog ramming Guide n = 50 (ASCII n = 2) HEX 32 This command erases all sectors available f or user data storage. n = 51 (ASCII n = 3) HEX 33 This command erases all sectors available f or permanent fonts.
Chapter 5: Progr amming commands 126 A776 (B780) Prog ramming Guide A776-PG00001 C 12/09 This command returns the stat e of occupanc y of a vailable ash storage and user RAM.
Chapter 5: Progr amming commands 127 A776-PG00001 C 12/09 A776 (B780) Prog ramming Guide Return boot sector rmware part number ASCII GS NULL Hexadecimal 1D 00 Decimal 29 0 Returns ACK (Hex 06) + 12 bytes ASCII string describing the ash memory boot sector rmware part number .
Chapter 5: Progr amming commands 128 A776 (B780) Prog ramming Guide A776-PG00001 C 12/09 Erase all ash con tents ex cept boot sector ASCII GS SO Hexadecimal 1D 0E Decimal 29 14 Causes the entire ash memory to be erased. The printer returns A CK if the command is successful; NAK if it is unsuccessful .
Chapter 5: Progr amming commands 129 A776-PG00001 C 12/09 A776 (B780) Prog ramming Guide communications failed or that the write to ash failed . The alternatives seem to be to r etr y the block or halt loading and assume a hardware failur e. Related informa tion Available only in do wnload mode.
Chapter 5: Progr amming commands 130 A776 (B780) Prog ramming Guide A776-PG00001 C 12/09 Set Gateway ASCII US BS ET X n1 n2 n3 n4 Hexadecimal 1F 08 03 n1 n2 n3 n4 Decimal 31 8 3 n1 n2 n3 n4 Default: none Sets the printer to the gatewa y having the IP address value specied by the values n1 to n4 .
Chapter 5: Progr amming commands 131 A776-PG00001 C 12/09 A776 (B780) Prog ramming Guide DHCP (auto- c onguration) ASCII US BS BS n1 Hexadecimal 1F 08 08 n1 Decimal 31 8 8 n1 n1 = 0: disabled n1 = 1: enabled Default: enabled Enables or disables the use of DHCP at power-up t o obtain an IP address.
Chapter 5: Progr amming commands 132 A776 (B780) Prog ramming Guide A776-PG00001 C 12/09 Imaging Commands In these descriptions, the commands and parameters are g iven in hexadecimal unless other wise not ed.
Chapter 5: Progr amming commands 133 A776-PG00001 C 12/09 A776 (B780) Prog ramming Guide Congur e/Change Image T ransmission P or t Hexadecimal : 1D B1 m n Par ameters : m = 0 (default) after scanning, status + image le goes to the port issuing the scan or transmit function; = 1 all image transmissions go only to a 2nd channel Ethernet port.
Chapter 5: Progr amming commands 134 A776 (B780) Prog ramming Guide A776-PG00001 C 12/09 r species the number of saved gr ay levels = scale resolution (default value = 0) as f ollows: V alue Den.
Chapter 5: Progr amming commands 135 A776-PG00001 C 12/09 A776 (B780) Prog ramming Guide Dene/Update Application T ag V alues Hexadecimal : 1D B4 nL nH t0 .
Chapter 5: Progr amming commands 136 A776 (B780) Prog ramming Guide A776-PG00001 C 12/09 Decimal V alue Denition 297 Reserved for FW P age Number & Number of Pages p1= bottom scanner , p2= top .
Chapter 5: Progr amming commands 137 A776-PG00001 C 12/09 A776 (B780) Prog ramming Guide V alue Denition Decimal Meaning 8 No stor ed document 9 Bottom side only 10 T op side only 11 Internal inter.
Chapter 5: Progr amming commands 138 A776 (B780) Prog ramming Guide A776-PG00001 C 12/09 Real- Time Err or Status Hexadecimal : 10 04 03 Par ameters : None Return : 1 byte to be int erpreted as follow.
Chapter 5: Progr amming commands 139 A776-PG00001 C 12/09 A776 (B780) Prog ramming Guide V alue Denition 1D Command return indicator 49 Image Scanner B8 Imaging function = wait for scan s Standard .
Chapter 5: Progr amming commands 140 A776 (B780) Prog ramming Guide A776-PG00001 C 12/09 Description : If a document is present in the imager that has already been imaged , it is ejec t ed out the imager back . When a document is present ed at the appropriate entry point, scan and save the front and back image int o the image buer .
Chapter 5: Progr amming commands 141 A776-PG00001 C 12/09 A776 (B780) Prog ramming Guide Return : This uses the message structure/protocol tr ansmission format that matches Scan & T ransmit except.
Chapter 5: Progr amming commands 142 A776 (B780) Prog ramming Guide A776-PG00001 C 12/09 If the image le return por t is RS232, then the header and a ttached image le are transmitted under the settings of the Congure RS232 F ile T ransmit parameters.
Chapter 5: Progr amming commands 143 A776-PG00001 C 12/09 A776 (B780) Prog ramming Guide Fr ee Image Hexadecimal : 1D BB nL nH Par ameters : nL nH is the FileIndex of the image buer spac e to be released. Return : 1D 49 BB s nL nH , where nL nH is the count of typical images that can be stor ed in free space in circular buer order .
Chapter 6 : DH emulation 1 44 A776 (B780) Prog ramming Guide A776-PG00001 C 12/09 Congur e Scan O ptions Hexadecimal : 1D C6 m n Par ameters : m n Description 0 - Congur e Imager default settings. Parameter n is ig nored. 1 0 Disable auto eject on top scan jam (default).
Chapter 6: DH Emulation 145 A776-PG00001 C 12/09 A776 (B780) Pr ogramming Guide Hexadecimal C ode Command Name Page 03 End of T ex t 147 05 03 Status: 3 Bit 154 0A Line Feed 147 0B V er tical T ab 147.
Chapter 6 : DH emulation 1 46 A776 (B780) Prog ramming Guide A776-PG00001 C 12/09 Hexadecimal C ode Command Name Page 1B 46 F orm In (Not I mplement ed) 149 1B 47 Selec t (Not Implemented) 149 1B 48 D.
Chapter 6: DH Emulation 147 A776-PG00001 C 12/09 A776 (B780) Pr ogramming Guide List of DH 4700 C ommand Descriptions The command descriptions in this section are grouped in the f ollowing categories:.
Chapter 6 : DH emulation 1 48 A776 (B780) Prog ramming Guide A776-PG00001 C 12/09 00 0 NUL Validation Lines/Inch 8.0 10 16 DLE 6.9 20 32 SP ACE 6.0 30 48 0 5.3 00 0 NUL P rint Self T est NO 40 64 @ (After setting temporary parameters) YES AL T selects the previous pitch selection.
Chapter 6: DH Emulation 149 A776-PG00001 C 12/09 A776 (B780) Pr ogramming Guide Document Clamp Close Closes the platen when the form has been detected and the time f or the clamp delay is up. This command enables the Slip/V alidation paper feed and disables the Receipt/Journal paper feed.
Chapter 6 : DH emulation 1 50 A776 (B780) Prog ramming Guide A776-PG00001 C 12/09 Print Speed This command is not supported and is ignored if rec eived. Hexadecimal Decimal ASCII 1B 53 27 83 ESC S Buered V alidate Opens the platen to allow a f orm to be inser ted .
Chapter 6: DH Emulation 151 A776-PG00001 C 12/09 A776 (B780) Pr ogramming Guide Character Set Selects the charac t er set. The default character set is dened by the internal DIP switch.
Chapter 6 : DH emulation 1 52 A776 (B780) Prog ramming Guide A776-PG00001 C 12/09 Underline Print Activates the 9th wire on all char ac t er cells to underline all printable characters, including a space (blank) character . Hexadecimal Decimal ASCII 1B 43 27 67 ESC C Underline O T urns o underline printing.
Chapter 6: DH Emulation 153 A776-PG00001 C 12/09 A776 (B780) Pr ogramming Guide Graphics C ommands These commands are used t o control the way graphics ar e entered or printed. They are listed in numerical order of their hexadecimal codes. Graphics E nters graphics printing mode which prints all a vailable dots (uses all wires in the printhead).
Chapter 6 : DH emulation 1 54 A776 (B780) Prog ramming Guide A776-PG00001 C 12/09 Each byte of data sent denes each c olumn of the graphic to be printed. The rst byte denes the column in the left margin, with the f ollowing bytes dening the columns to the right, f or a total of up to 200 columns in the print line.
Chapter 6: DH Emulation 155 A776-PG00001 C 12/09 A776 (B780) Pr ogramming Guide.
Appendix A: Commands b y hexadecimal code 156 A776 (B780) Prog ramming Guide A776-PG00001 C 12/09 Appendix A: C ommands listed by he xadecimal code Code (he xadecimal) Command Page 09 Horizontal tab 4.
Appendix A: Commands b y hexadecimal code A776-PG00001 C 12/09 A776 (B780) Prog ramming Guide 157 1B 2D n Select or cancel underline mode 57 1B 2E m n rL rH d1 … dn Print advanced raster g raphics 6.
Appendix A: Commands b y hexadecimal code 158 A776 (B780) Prog ramming Guide A776-PG00001 C 12/09 1B 6A k Read from non-volatile memory (NVRAM) 122 1B 6D Perform par tial knife cut (or code 1A ) 37 1B.
Appendix A: Commands b y hexadecimal code A776-PG00001 C 12/09 A776 (B780) Prog ramming Guide 159 1D 23 n Selec t the current logo (do wnloaded bit image) 68 1D 24 n L n H Set absolute v er tical prin.
Appendix A: Commands b y hexadecimal code 160 A776 (B780) Prog ramming Guide A776-PG00001 C 12/09 1D 89 n m Logo print with color plane swap 72 1D 8B n m o Apply shading to logo 72 1D 8C n m Merge wat.
Appendix A: Commands b y hexadecimal code A776-PG00001 C 12/09 A776 (B780) Prog ramming Guide 161 1F 03 16 f s p/r t Set LogoEZ® colorization 77 1F 03 17 a m s Set LogoEZ® attribute mapping 79 1F 04.
Appendix B: Resident Character Sets 162 A776 (B780) Prog ramming Guide A776-PG00001 C 12/09 Appendix B: Resident Char ac ter Sets Code P age 437 (US).
Appendix B: Resident Character Sets A776-PG00001 C 12/09 A776 (B780) Prog ramming Guide 163 Code page 737 ( G r eek).
Appendix B: Resident Character Sets 164 A776 (B780) Prog ramming Guide A776-PG00001 C 12/09 Code page 850 (Multilingual).
Appendix B: Resident Character Sets A776-PG00001 C 12/09 A776 (B780) Prog ramming Guide 165 Code P age 852 (Slavic).
Appendix B: Resident Character Sets 166 A776 (B780) Prog ramming Guide A776-PG00001 C 12/09 Code P age 857 ( T urkish).
Appendix B: Resident Character Sets A776-PG00001 C 12/09 A776 (B780) Prog ramming Guide 167 Code page 858 (with E urosymbol).
Appendix B: Resident Character Sets 168 A776 (B780) Prog ramming Guide A776-PG00001 C 12/09 Code page 860 (P or tugese).
Appendix B: Resident Character Sets A776-PG00001 C 12/09 A776 (B780) Prog ramming Guide 169 Code page 862 (Hebr ew).
Appendix B: Resident Character Sets 170 A776 (B780) Prog ramming Guide A776-PG00001 C 12/09 Code page 863 (F rench Canadian).
Appendix B: Resident Character Sets A776-PG00001 C 12/09 A776 (B780) Prog ramming Guide 171 Code page 865 (Nor dic).
Appendix B: Resident Character Sets 172 A776 (B780) Prog ramming Guide A776-PG00001 C 12/09 Code page 866 ( Cyrillic).
Appendix B: Resident Character Sets A776-PG00001 C 12/09 A776 (B780) Prog ramming Guide 173 Code page 1252 (Windo ws Latin 1).
.
Appendix C: E lectronic Journal A776-PG00001 C 12/09 A776 (B780) Prog ramming Guide 175 The Electronic Journal feature is f or use with an application that does not support elec tronic journal . T he printer can be used to store a variety of transactions.
Appendix C: Electronic Journal 176 A776 (B780) Prog ramming Guide A776-PG00001 C 12/09 Journal RAM buer Journal data is temporarily buer ed in RAM until the printer is triggered to write it to ash. A t power up 4K bytes of RAM will be dynamically allocated.
Appendix C: E lectronic Journal A776-PG00001 C 12/09 A776 (B780) Prog ramming Guide 177 Printing and Er asing the Journal Flash Bu er: Operator A c tiv ation of Journal Print and Erase Enabled via 1F 03 2E 01. Disabled via 1F 03 2E 00. Enabled and disabled also via the cong menu under the Emulation/Software Options sub-menu.
Appendix C: Electronic Journal 178 A776 (B780) Prog ramming Guide A776-PG00001 C 12/09 1F 0A C5 Return Journal Status Returns one byte of status. bit 0 = 0 >> W rite to ash successful bit 0 =.
.
A776-PG00001 Rev . C 12/09.
デバイスCognitive Solutions B780の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Cognitive Solutions B780をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはCognitive Solutions B780の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Cognitive Solutions B780の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Cognitive Solutions B780で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Cognitive Solutions B780を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はCognitive Solutions B780の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Cognitive Solutions B780に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちCognitive Solutions B780デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。