CTXメーカーp772Lの使用説明書/サービス説明書
ページ先へ移動 of 20
User's Manual P772L LCD Monitor.
i ♦♦♦ Federal Communications Commission (F.C.C.) Statement This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
ii ♦♦♦ Congratulations! The display you have just purchased carries the TCO'03 Displays label. This means that your display is designed, manufactured and tested according to some of the strictest quality and environmental requirements in the world.
♦♦♦ 1 English TABLE OF CONTENTS IMPORTANT SAFETY INSTRUCTIONS .............................................................. 2 INTRODUCTION ............................................................................................... 3 Product Description .
♦♦♦ 2 English IMPORTANT SAFETY INSTRUCTIONS Please read the following instructions carefully. This manual should be retained for future reference. 1. To clean the LCD Monitor screen make sure the Monitor is in the power off mode. Unplug the Monitor from its power source before cleaning it.
♦♦♦ 3 English INTRODUCTION LCD Monitor Power Cord Product Description Congratulations on purchasing this new generation monitor. Your LCD monitor incorporates high quality display into a small light-weight module. It has power-saving capabilities and emits no X-ray radiation.
♦♦♦ 4 English Installation of the Monitor Arm CAUTION 1. The Monitor Arm is an optional item. 2. The Arm Mounting Device must be VESA Flat Physical Mounting Interface Standard.
♦♦♦ 5 English INTRODUCTION Recommended Use of the Monitor • Power – Use the type of power indicated on the marking label. • Plugs – Do not remove any of the prongs of the monitor's three-pronged power plug. – Disconnect the power plug from the AC outlet if you are not going to use it for an indefinite period of time.
♦♦♦ 6 English LCD Monitor Base Installation Guide 1 . First attach the back cover to the monitor. Carefully match up the three hinges at the top of the cover with the three corresponding slots; slide and lock into place. 3. Using a flathead screwdriver, insert the screws and tighten in the direction indicated.
♦♦♦ 7 English INTRODUCTION Guidelines for Operating the Viewing Angle of LCD Monitor 1. Height Adjustment You can adjust the height of the monitor by securely holding the base with one hand and pulling up the monitor stand with the other. The height of the monitor can be be adjusted from 383.
♦♦♦ 8 English CONTROLS AND ADJUSTMENTS Once you have installed this monitor with your system, please read the instructions in this section, they give you some guidelines on how to use the monitor more efficiently. And lead you through the various functions of the user controls and explain how to adjust the monitor to your personal preference.
♦♦♦ 9 English CONTROLS AND ADJUSTMENTS On Screen Display (OSD) Main menu 1. Press " ↵ ↵ ↵ ↵ ↵ " to open the OSD main menu. 2. Use the " ∇ " and " ∆ " buttons to move through the displayed functions. 3.
♦♦♦ 10 English CONTROLS AND ADJUSTMENTS 2. Auto-Tune Here are some items which can be adjusted as below, please press " ↵ " to enter the item menu. ADVANCED AUTO TUNE PATTERN PROGRAM USAGE GUIDE • AUTO_TUNE.exe is used for Windows the display mode adjustment.
♦♦♦ 11 English CONTROLS AND ADJUSTMENTS 3. Color You can choose either the 6500°k, 9300°K color temperature mode, User mode or Motion Picture to store your user defined color settings. • User Mode a. Press " ↵ " button to enter User mode.
♦♦♦ 12 English 4. Image Here are some items which can be adjusted as below, please press " ↵ " to enter the item menu. • Clock: Press the " ∇ " or " ∆ " button to adjust the width of the screen. • Phase: Press the " ∇ " or " ∆ " button to reduce the noise on the screen.
♦♦♦ 13 English 6. OSD Setting To adjust the OSD position. • H - Position: Press the " ∇ " or " ∆ " button to reposition the OSD window to the right or left. • V - Position: Press the" ∇ " button to move the OSD window downwards and " ∆ " to move it upwards.
♦♦♦ 14 English CONTROLS AND ADJUSTMENTS Power Consumption (120/230 Vac) Energy Declaration This monitor is equipped with a function for saving energy, which supports the VESA Display Power Management Signaling (DPMS) standard. This means that the monitor must be connected to a computer.
♦♦♦ 15 English TROUBLESHOOTING Troubleshooting If you are experiencing trouble with the LCD display refer to the following. If the problem persists please contact your local dealer or our service center. The monitor does not respond after you turn on the system.
♦♦♦ 16 English 1 11 5 10 16 6 TECHNICAL INFORMATION Compatibility This LCD monitor supports multiple operating platforms such as IBM compatible computers. This section provides you with detailed information on pin assignment of the D-Sub connector and the preset timing chart of the prevailing video standards.
♦♦♦ 17 English TECHNICAL INFORMATION Specifications Note : Specifications are subject to change without notice LCD Panel 17" TFT LCD module with wide-viewing angle, 0.264 (H)x0.264(V)mm pixel [Monitor] Effective display size 17" (43.2cm diagonal) Resolution (max.
デバイスCTX p772Lの購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
CTX p772Lをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはCTX p772Lの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。CTX p772Lの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。CTX p772Lで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
CTX p772Lを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はCTX p772Lの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、CTX p772Lに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちCTX p772Lデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。