CurtisメーカーKCR2620DUKの使用説明書/サービス説明書
ページ先へ移動 of 29
Operation Instruction Multi-media Digital TV Receiver for Kitchen MODEL NO.: KCR 2620DUK 2.
T able of Contents I Precautions II Accessories III Description of Appearance IV Description of Remote Controller V Basic port Connect VI Operation Instruction for Alarm Clock Radio System VII DVB-T D.
-1- Bright spots or dark spots may appear on the screen. This is a normal phenomenon associated with the active matrix display technology and is not a sign of malfunction. Do not attempt to maintain. For any failures, please turn off your TV set immediately and contact us or your dealer.
O p e r a t i o n In s t r u ct i o n M u l t i - m e di a D i g i t a l T V R e c e i v e r f o r K i t c h e n MO D E L N O . : K C R 2 6 2 0 D U K 2 -2- II Accessories Installation manual Knighthea.
III Description of Appearance -3- 1. DVD/TV/AUX: Mode Switch key. In power-on state, press this key to switch between DTV/ATV/DVD/AUX. 2. FM/AM: Radio Mode key.
-4- Power-off Setting function. Press this key in sleep state to cancel this state; in alarm state, press this key to start snooze function (interval time is 8 minutes), and the screen will show "SNOOZE" symbol.
-5- 13. OK: OK key. In the DTV and DVD state, press this key to confirm the selected item. 14. VOL-: Volume Decreasing key . In power-on state, press this key to decrease volume; when entering analogue adjusting menu, press this key to adjust analogue decrease; in the DTV and DVD state, press this key to select left.
-6- 1. POWER: Standby/ Power off key. Press it to switch between Power-on and Standby, when the alarm sounds, press this key to close alarm. 2. FM/AM: FM/AM switch key. In power-on state, press this key to enter the FM/AM Mode Switch of RADIO system. 3.
-7- and minutes of the current time, AL1, AL2(the number of current hour or minute will flash), then press "SKIP/TUNER" key to adjust. When these two alarms are set at the same time, alarm 1 is effective but alarm 2 isn't. 6. 0-9, -/--: Number key, Channel Directly Selecting key .
-8- 18. A-B: A-B Screen Repeat key. 19. SLOW: Slow key (Only in DVD state). 20. SLEEP: Sleep Timing Power off key . Press this key to set the system power-off at different times.
-9- V Basic port Connect Connect to USB and CARD: Set the player in DVD state and connect the USB device or Card to corresponding interface. 34. EPG/ANGLE: In DTV state, it is the Electronic Program Menu key. Press this key to enter electronic program menu interface; in DVD state, it is Angle Switch key .
VI Operation Instruction for Alarm Clock Radio System 1 .Time setting ( on remote) CLOCK Hour setting Press for 3 seconds -10- ( on remote) CLOCK Press one time Minute setting ( on remote) CLOCK Press.
-11- 3. Snooze/Turn off alarm 4. Sleep time setting 5. Calculagraph While the alarm ring, press SNOOZE to pause, it will ring again after 8 minutes. While the alarm ring, press POWER to stop, it will ring at this time next day. Press SLEEP key to choose sleep time to be (90, 80, .
-12- VII DVB-T Digital TV Receiver Instruction 1. Automatic installation guide For first use or when the program list doesn't exist, system will implement quick installation guide after connecting power. Please follow the screen prompt, press "OK" key to scan automatically as shown in the following picture: 2.
Setup Subtitles Data Service Audio On Screen Display off English English English Television 16:9 Languages TV Setup Organiser Timer Programming Favourltes Menu Function Submenu Operation Instruction &.
PICTURE BRIGHT 50 CONTRAST 50 50 RESET SATURA TION MAIN MENU PICTURE SYSTEM PRESET VIII Analog TV receiving operation Press DVD/TV/AUX to enter A TV mode, display options as follows: PICTURE SYSTEM PRESET 1.
PRESET PROGRAM 1 REMEMBER ON AUTO SEARCH SWAP 1 FINE 0 MANUAL SEARCH 551MHz SOUND-SYS DK COLOR-SYS PAL 2. STSTEN Press to select System item, press then (language), (picture mode), (Image Flip) and Blue back displays on the screen as illustrated below: Use direction key to adjust selected item.
Note 1. Auto Search Start from Program No. 0. 2. When receive signal under Manul Search, the indicati on freq uency s top means the optimum position for signal storage. If cha nnel un der wea k signal is received, the channel sto rage system will a utomati cally identify it as no signal.
-17- IX DVD Operation Instruction 1. Instruction for basic operation 1 Play/Pause 1) After the disc be read, the disc types information of DVD, VCR or CD could be displayed on TFT screen. 2) Some disc will play automatically when tray is in. 3) When playing DVD or some VCD2.
2. Special function operation instruction 1 Selection of caption language While playing, you could select your favor caption language by press SUBTITLE key directly or pressing SETUP key to enter system menu to change caption language. Please refer to system menu operations.
6 > Menu Some DVD discs have complex contents such as multi-subtitle, multi- audio, or multi-angle. In these cases, you can use the DVD menu to select audio language, subtitle language, and video angle. 1) Press MENU during playback to display the DVD menu.
-20- VCD disc Info Display CD disc Info Display DVD disc Info Display Title selecting If the disc include many Title or chapter , press "SEARCH" use direction key or digit number key to select title, chapter and time. Play CD CD track select Playing CD, all track can be select and play: 1.
-21- Viewing JPEG files JPEG files list JPEG file list in the current folder Current selected file The operation method of viewing JPEG files is similar as the operation method of playing MP3, the above picture will appear after insert JPEG disc. 1. The image zoom function is available while displaying JPEG file.
3. System menu setup T o setup the mainframe system, Press SETUP to enter system menu. Then you could setup the DVD player for Lock, Display, Audio, Language and Default etc. 1. Use left/right key to select item on the main option list. The item list appear.
The default of this DVD player MENU ITEM DEFAUL T SYSTEM SETUP TV SYSTEM NTSC/PAL/AUTO KID SAFE/G/PG/PG13/PG-R/R/NC-17/ADULT 12/10/8/6/4/2/0 12/10/8/6/4/2/0 +6/+4/+2/0/-2/-4/-6 12/10/8/6/4/2/0 FULL 6/.
X Troubleshooting The following phenomenon does not indicate failures. Before you contact us for repair, please check your device according to the approaches below.
XI T echnical Parameters DVD T echnical parameters Laser wave length: DVD 650nm; CD 780nm Optical pickup: DV34 (SANYO) Compatible disc: MPEG-4, DVD, VCD, CD, MP3, WMA, JPEG CD, CD-R, CD-R/W, DVD+R/-R(nonsupport DIVX 3.
Speaker Output Power: more than1.2W 2CH(when Distortion is less than 10%) Power Consumption: less than 20W Dimensions: 360mm 290mm 78mm Weight: about 2900g Note: Batteries only power the system clock. When main power is off, clock and memory remains the same and the TV receiver stops playing.
Warning This operation instruction is only intended for reference. No further notice is available to any modification of all information contained therein. Due to continuing improvements, the features and design are subject to change without notice. after some items in this manual means it is available with this function.
デバイスCurtis KCR2620DUKの購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Curtis KCR2620DUKをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはCurtis KCR2620DUKの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Curtis KCR2620DUKの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Curtis KCR2620DUKで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Curtis KCR2620DUKを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はCurtis KCR2620DUKの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Curtis KCR2620DUKに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちCurtis KCR2620DUKデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。