Earthquake SoundメーカーXJ-300 FRの使用説明書/サービス説明書
ページ先へ移動 of 20
User’s Manual Earthquake Sound Corp. | (510) 732-1000 | www.earthquakesound.com XJ-300 FR 2 Channel or Monoblock Class “J” Amplifier.
2 XJ-300FR Manual Earthquake Sound Corp. | www.earthquakesound.com Earthquake Sound Corporation 2727 McCone Avenue Hayward, CA 94545 Tel: 510-732-1000 Fax: 510-732-1095 Customer Support tech@earthquakesound.com Tel: 800-576-7944 Fax: 510-732-1095 © 2011 Earthquake Sound Corporation.
XJ-300FR Manual 3 Specifications are subject to change without notice Safety Instructions 1) Read these instructions in their entirety. 2) Store this manual and packaging in a safe place. 3) Heed all warnings. 4) Follow instructions (do not take short cuts).
4 XJ-300FR Manual Earthquake Sound Corp. | www.earthquakesound.com Unpacking System Components • Keep the original carton and packing materials for future shipment or storage. • Check for any visual signs of damage. If you encounter any concealed damage, consult your Earthquake Sound dealer before proceeding with unit installation.
XJ-300FR Manual 5 Specifications are subject to change without notice Included in the Box 1 XJ-300FR Stereo Class “J” Amplifier 4 Short Mounting Ears 1 Bracket 4 Screws for the Bracket 1 Power Cord Introduction The XJ-300FR amplifier is an extremely versatile and modular amplifier.
6 XJ-300FR Manual Earthquake Sound Corp. | www.earthquakesound.com Front Features 3) Auto Music Sensing: Amplifier automatically turns on when it senses signal. 1) Power Switch: Switch to “ON” to turn on or to use the Auto on music sensing feature.
XJ-300FR Manual 7 Specifications are subject to change without notice 3) Auto Music Sensing: Amplifier automatically turns on when it senses signal. 4) Bypass/Lowpass: Set to Bypass to use as a 2 channel or 2.1 channel amplifier. Set to Lowpass to use as a 1 channel or subwoofer amplifier.
8 XJ-300FR Manual Earthquake Sound Corp. | www.earthquakesound.com Back Features 1) RCA Inputs The most common audio input 1) RCA Inputs: If you are using the XJ-300FR as a mono block (1 channel amplifier), connect only the left (white) RCA terminal. Be sure the toggle switch is set to “RCA” in order to use this input.
XJ-300FR Manual 9 Specifications are subject to change without notice 4) Speaker Outputs: A) To use the XJ-300FR as a two channel amplifier, connect the right speaker to the R+ and R- terminals and the left speaker to the L+ and L- terminals.
10 XJ-300FR Manual Earthquake Sound Corp. | www.earthquakesound.com Mounting Options for 1 XJ-300FR The XJ-300FR also comes with four rubber feet to not damage the bottom in the instance that it simply sits on a shelf or cabinet. Then bolt to any vertical or horizontal surface.
XJ-300FR Manual 11 Specifications are subject to change without notice Linking 2 XJ-300FRs The XJ-300FR’s ingenious design lets the user link two amplifiers together depending on the desired channel set-up. 1) Match the bolts on the left side of one amp with the linking holes on the right side of the other amp.
12 XJ-300FR Manual Earthquake Sound Corp. | www.earthquakesound.com Mounting 2 XJ-300FRs Screw short mounting arms to the outer sides of the amplifiers so they are rack mountable.
XJ-300FR Manual 13 Specifications are subject to change without notice Connecting to a Subwoofer/Tactile Transducer Wiring with the THOR In-Wall Subwoofer Receiver/Processor + _ Wiring with the Q10B T.
14 XJ-300FR Manual Earthquake Sound Corp. | www.earthquakesound.com Connecting to Tactile Transducers Make sure the front toggle switch is set to “Low Pass” if connecting to a subwoofer or tactile transducer. Note: Wiring with 2 MQB-1 Tactile Transducers Receiver/Processor + _ + _ Do not wire 1 MQB-1 with the mono bridge setting.
XJ-300FR Manual 15 Specifications are subject to change without notice Wiring with the ROCK-on 2.1 channel system Series Wiring + _ + _ Connecting to Outdoor Speakers (cont.) Granite-52 Speakers Granite-10D Subwoofer + _ + _ Receiver/Processor Though 1 XJ-300FR is capable of powering the Granite 2.
16 XJ-300FR Manual Earthquake Sound Corp. | www.earthquakesound.com Connecting to SWAT 2.4 Wireless Transceiver SWAT 2.4 Wireless Receiver SWAT 2.4 Wireless Transmitter Music Source with audio output The XJ-300FR is optimized for use with the SWAT 2.4 Wireless Transceiver.
XJ-300FR Manual 17 Specifications are subject to change without notice Specifications Model No. XJ-300FR Output Power 8-ohm load: 2 x 110 WRMS 4-ohm load: 2 x 170 WRMS Mono Bridged: 8-ohm load: 170 WRMS 4-ohm load: 300 WRMS Frequency Response 20Hz - 20kHz THD 0.
18 XJ-300FR Manual Earthquake Sound Corp. | www.earthquakesound.com 5 Year Limited Warranty Earthquake warrants the original purchaser that the speaker or amplifier (product) is free from defects in m.
XJ-300FR Manual 19 Specifications are subject to change without notice 5 Year Limited Warranty (cont.) • Bent casing, damaged finish on casing due to abuse, misuse, or improper frame or broken connections. • Fading, deterioration of components and finish due to improper exposure to elements.
The Sound That Will Move You. Earthquake Sound reserves the right to amend details of the specifications without notice. © Copyright Earthquake Sound Corporation Earthquake Sound Corporation 2727 McC.
デバイスEarthquake Sound XJ-300 FRの購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Earthquake Sound XJ-300 FRをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはEarthquake Sound XJ-300 FRの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Earthquake Sound XJ-300 FRの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Earthquake Sound XJ-300 FRで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Earthquake Sound XJ-300 FRを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はEarthquake Sound XJ-300 FRの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Earthquake Sound XJ-300 FRに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちEarthquake Sound XJ-300 FRデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。