EdimaxメーカーHP-6002Kの使用説明書/サービス説明書
ページ先へ移動 of 30
HP - 6002 User Manual 04- 201 4 / v1.0.
1 COPYRIGHT Copyright Edim ax Technology Co., Ltd. al l rights reserved. No part of this publication may be reprodu ced, transmitted, transc ribed, stored in a retrieval system, or translated in t.
2 Contents Chapter 1: Introduction ..................................................................................................................................... 3 1.1 Product Features ...........................................................
3 Chapter 1 : In troduction 1.1 Product Featur es • High-speed d ata transfer rate of up to 600Mbp s, ideal for bandwidth-intensive HD video or 3D video str eaming and online gaming • Features ene.
4 1.3 Compatibility AV6 00 powerline devic es (HomePlug AV standard ) are incompatib le and cannot be used with 14 Mbps and 85Mb ps powerline devices ( HomePlug 1.0 an d 1.1 standards). 1.4 System Requir ements Operating System Utility supports Wind ows XP/Vista /7/8 CPU Intel P entium III 1.
5 Chapter 2 : In terfaces 2.1 LEDs LED Status Description LAN Green LAN port connecte d Blinking LAN activity (transf erring data) Off LAN port not conn ected PLC Green The green indicator turns on and the gre en indicator turns bli nks slowly when the devic e is detecting a powe rline link.
6 2.2 Button Interface Description Ethernet Port This is a Gigabi t Ether net port for connecti ng to a computer or othe r devices with a networ k port. Group Creates an encrypt ed powerline network g roup automatically (press the but ton for less than 3 seconds ).
7 Chapter 3:Utility Software Installa tion 3.1 Win 8 Step 1 Before installing th e utility software, make sure that no other powerline u tility is installed on your compute r. If any other utility software is inst alled, un install it and reboot the c omputer.
8 Step 4 Click right button on WinPCap 4.1.2 then click “ Properties ” . Step 5 Click Comp atibility tab and check “ Run this program in compatibility mode for:", then selec t Windows 7, then c lick “ Apply ” . Step 6 Then click “ WinPc ap_4_1_2 ” .
9 Step 7 When the following WinPcap Compatibility Assistan t appears, select Run the program without ge tting help..
10 Step 8 After the installation is comp lete, click “ Finish ” ..
11 Step 9 Click th e “ Edimax PowerLine Utilit y ” , the “ PLC AV600 Utility ” appears, click “ Next ” to continue..
12 Step 10 Select where you want to install the utility software, and then click “ Next ” . Step 11 After the installati on is complete, click “ Close ” .
13 Step 12 An icon will ap pear on your d esktop. Click the icon to open the utility software. Note: You can manage all t he connecte d powerline adapte rs with th e utility so ftware.
14 3.2 Win XP/Vista / 7 Step 1 Before installing th e utility software, make sure that no other powerline u tility is installed on your compute r. If any other utility software is inst alled, un install it and reboot the c omputer. Step 2 Insert the CD into your CD -ROM drive.
15 Step 4 If you have not installed Win Pcap version 4.1.2 ( or higher) on your c omputer before. The wiza rd will guide you through the setup process.
16.
17 Step 5 When th e “ Edimax PowerLine Utility ” setup wizard appears, click “ Next ” to continue. Step 6 In the “ Lic ense Agreement ” scree n, please select “ I Agree ” and then click “ Next ” to continue.
18 Step 7 Select where you want to install the utility software, and then click “ Next ” . Step 8 If you confirm to install the utility, click “ Next ” .
19 Step 9 After the installation is comp lete, click “ Close ” . Step 10 An icon will app ear on your deskt op. Click the ic on to open the utility soft ware. Note: You can manage all th e connected powerline adapters with the utility software. However, i nstalling th e utility software i s optional.
20 Ch apter 4 : U sing the U tility Software 4.1 Main Tab The “ Main ” tab provides a list of p owerline adap ters connected to the net work. The upper p anel displays local powerline adapters . Th e lower pan el displays remote powerline adapters in the network.
21 4. 2 Diagnostics Tab The “ Diagnostics ” tab displays the system information and history of all rem ote devices. The upper p anel displays tec hnical data concerning the software and hardware on the host compute r and t he lower panel displays th e history of all re mote devic es.
22 4. 3 About Tab The “ About ” tab contains some b asic information ab out the software. You can also enable or d isable the autoscan fun ction under “ Preferenc es ” .
23 Chapter 5 : Grou p Button This section dem onstrates how to add or remove d evices from a HomeP lug AV n etwork with the “ Group ” button. 5.1 Forming a Hom ePlug AV Logical N etwork When two d.
24 5.2 Joining a Netw ork If you want to add a new powerline device to an existing network , follow th e following procedures: Step 1 Press the “ Group ” b utton on an adapter in th e existing net work (adapter A or B) for less than 3 seconds. The Power LED will st art to blink.
25 5.3 Leaving a Netw ork & Joining an other Network If you want to remove a p owerline device from an existing network and ad d it to another net work, follow the following procedu res: Step 1 Press the “ Group ” b utton on the adapte r to be removed (adapter B) for at least 10 seconds.
26 Chapter 6: Trou bleshooting If your powerline ada pters have difficu lty communicatin g with each other, try the following proc edures: Try power cyc ling the u nit by unplugging it from the electric outlet for 10 seconds an d plugging it in again.
27 Federal Communic ation Commissi on Interfere nce Statement This equipment has b een tested and f ound to comply with the limits f or a Class B digital devi ce, pursuant to Part 15 of FCC Rules. These li mits are designed to provide re asonable pr otection again st harmful interf erence in a residential installation.
28 EU Declaration of Confor mity English: This equipment is in comp liance with the essential r equirements and other relevant pr ovisions of Directive 2004/108/EC, 2 009/125/EC.
29.
デバイスEdimax HP-6002Kの購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Edimax HP-6002Kをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはEdimax HP-6002Kの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Edimax HP-6002Kの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Edimax HP-6002Kで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Edimax HP-6002Kを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はEdimax HP-6002Kの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Edimax HP-6002Kに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちEdimax HP-6002Kデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。