Elo TouchSystemsメーカー1200Lの使用説明書/サービス説明書
ページ先へ移動 of 27
.
Copyright © 2001 Elo T ouchSystems Inc. All Right s Reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or.
2 Usage Notice Precautions ................................................................................. 3 Introduction About the Product ....................................................................... 4 Package Overview ..................
3 Usage Notice Warning- T o prevent the risk of fire or shock hazards, do not expose this product to rain or moisture. Warning- Do not open or disassemble the product as this may cause electric shock. Precautions Follow all warnings, pr ecautions and maintenance as r ecom- mended in this user ’ s manual to maximize the life of your unit.
4 Introduction About the Product This product is a 12.1” SVGA TFT color LCD touchmonitor with the following features: G Direct analog RGB input G Active matrix TFT LCD technology G 12.
5 RS-232 T ouchscreen Interface Cable Audio-In Cable US/Canada Power Cord Package Overview Check that the following 10 items are present and in good condition: Mac Video Adapter User’s Guide and sof.
6 Installation Product Overview K Main Unit K Rear View MEN U SELECT LCD T ouchmonitor S tand User Controls Power Switch Ear Phone Audio In Power DC-In Display Input RS-232 T ouch Interface.
7 S tart Y our Installation K Tilt Grasp both sides of the monitor screen with your hands and adjust the tilt as desired. K Connecting the T ouchmonitor (Figure 7.1) T o setup this touchmonitor , please refer to the following figure and proce- dures. 1.
8 Notice: T o ensur e the LCD display works well with your computer , please configure the display mode of your graphic card to less than or equal to 800 x 600 resolution. Make sure the timing of the display mode is compatible with the LCD display . W e have listed the Compatibility Modes of this LCD display in the appendices for your reference.
9 User Controls Front Panel Controls No. / Icon Control Function MENU Menu button Displays the OSD menus SELECT Select Selects the adjustment items from OSD menus. ! Decrease / Select D ecreases value of the adjustment items or selects the functions.
10 How to Use the OSD Menus 1. Press the “MENU” button to pop up the on-screen menu and to toggle between Main Menu Page 1 to Page 3. 2. Choose the adjustment items by pressing the “ SELECT” button. 3. Adjust the value of adjustment items by pressing the “ ! ” & “ " ” buttons.
11 On-Screen Display Menus " Brightness Adjusts the brightness of the image. " Contrast Adjusts the contrast of the display image. " Horizontal Position Adjusts the horizontal position of the image. " V ertical Position Adjusts the vertical position of the image.
12 " Auto-Adjustment Choose this function to obtain an optimum image. " Re-Scaling If the input resolution is less than 800 x 600, you can select this function to obtain the full screen image. " Display Mode Select this function to demonstrate the display resolution, vertical refresh, and horizontal scan of the current mode.
13 " V olume Allows you to control the volume of sound, " Mute Allows you to disable the sound immediately . " Reset Returns the display parameters of the current mode to the factory defaults.
14 T r oubleshooting If you ar e experiencing tr ouble with the LCD display , r efer to the following. If the pr oblem persists, please contact your local dealer o r our service center . Please r efer to the back cover of this manual for the phone number of the Elo T ouchSystems office nearest you.
15 W arning Signal Sometimes you will see warning messages fr om the LCD screen. This means that the LCD display cannot r eceive the signal from the computer graphic car d. Ther e are thr ee situations wher e this may happen. Please check the connected cables or contact your local dealer for mor e information.
16 Product Dimensions 340mm/13.4” 286.7mm/1 1.3” 170mm/6.7” Front View Side View T op View.
17 T ouchmonitor Specifications 12” LCD T ouchmonitor (ET12-XXWC-1) Specifications e p y T y a l p s i D r o t s i s n a r t m l i f n i h t , x i r t a m e v i t c A y a l p s i d l a t s y r c d i.
18 AccuT ouch T ouchmonitor Specifications l a c i n a h c e M n o i t c u r t s n o Cg n i t a o c e c a f r u s - d r a h e d i s t u o h t i w r e t s e y l o P : p o T .
19 Compatibility Modes A G V M B I0 5 3 x 0 4 60 75 . 1 3 A G V M B I0 0 4 x 0 4 60 75 . 1 3 A G V M B I0 8 4 x 0 4 60 65 . 1 3 A G V M B I0 0 4 x 0 2 70 75 . 1 3 A G V A S E V0 8 4 x 0 4 62 79 . 7 3 A G V A S E V0 8 4 x 0 4 65 75 . 7 3 A G V A S E V0 8 4 x 0 4 65 83 .
20 Installing the Driver Software Elo T ouchSystems provides driver software that allows your touchmonitor to work with your computer . Drivers are located on the enclosed CD-ROM for the following operating systems: Windows 2000 Windows 98 Windows 95 Windows NT 4.
21 2. Follow the directions on the screen to complete the driver setup for your version of Windows. If the AutoSt art feature is not active: 1. Click Start > Run . 2. Click the Browse button to locate the touch.exe pro- gram on the CD-ROM. 3. Click Open , then OK to run touch.
22 T o run the INST ALL program: 1. T ype INST ALL at the DOS prompt in the directory con- taining the driver install files. 2. INST ALL asks you to select the sof tware to install. Then choose d:EloDW from the displayed list. 3. INST ALL also asks you for the p aths to use during in- stallation, or you may use its defaults.
23 Regulatory Information I. Electrical Safety Information: A) Compliance is required with respect to the voltage, frequency , and current require- ments indicated on the manufacturer ’ s label.
24 c) The user is cautioned that changes or modifications to the equipment not expressly approved by the party responsible for compliance could void the user ’ s authority to operate the equipment.
25 W arranty Except as otherwise stated herein or in an order acknowledgment delivered to Buyer, Seller warrants to Buyer that the Product shall be free of defects in materials and workmanship.
26 SELLER’S LIABILITY UNDER THE W ARRANTY SHALL BE LIM- ITED TO A REFUND OF THE PURCHASE PRICE OF THE PR ODUCT . IN NO EVENT SHALL SELLER BE LIABLE FOR THE COST OF PRO- CUREMENT OR INST ALLA TION OF SUBSTITUTE GOODS BY BUYER OR FOR ANY SPECIAL, CONSEQUENTIAL, INDIRECT , OR INCIDENT AL DAMA GES.
デバイスElo TouchSystems 1200Lの購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Elo TouchSystems 1200Lをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはElo TouchSystems 1200Lの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Elo TouchSystems 1200Lの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Elo TouchSystems 1200Lで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Elo TouchSystems 1200Lを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はElo TouchSystems 1200Lの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Elo TouchSystems 1200Lに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちElo TouchSystems 1200Lデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。