Elo TouchSystemsメーカー1729Lの使用説明書/サービス説明書
ページ先へ移動 of 61
T ouchmonitor User Guide 1729L 17 " LCD Desktop Touchmonitor (Optional Magnetic Stripe Reader, Custome r Display, Barcode Scanner and Fingerprint Reader available) *shown with optional peripheral.
Elo T ouchSyste msT ouchmonitor User Guide 17 " LCD De s ktop 1729L Revision A P/N E488297 Elo T ouchSyste ms. 1-800-557-1458 www.elotouch.com.
Copyright © 2007 Tyco Electronics. All Rights Reserved. No part of this publication may be reproduced, tra nsmitted, tra nscribed, stored in a retrieval system, or tra nslated into a ny la nguage or .
Chapter 1 Introduction 1 Product Description ................................................. 1 Detailed LCD Display Performance Requirements .......................................................... 2 Customer Display ..............................
Appendix B T ouchmonitor Safety 37 Care and Handling of Your Touchmonitor .......... 38 Appendix C T echnical Specif ication s 39 Touchmonitor Specifications ......................... 40 AccuTouch Touchscreen Specifications ...........................
.
C H A P T E R 1 I NTRODUCTION Product Description The 1729L consists of a 17.0” LCD main display with a touchscreen a nd the following optional peri pherals: customer display , va cuum fluorescent display (VF D), fingerprint rea der , barcode sca nner , magnetic stripe rea der (MSR), speaker bar a nd a 6 port USB (USB version only) Hub.
Detailed LCD Display Perf orma nce Requirements 17 inch TFT LCD Display Pa nel Display Format 1280 x 1024 Display area 17” 337.92mm(H) x 270.336mm(V) Pixel Pitch 17” 0.
Customer Display The Customer Display is a twenty chara cter two line va cuum fluore scent display (VF D). It consists of a VF D a nd VF D controller . USB V ersion Optional Para meters Chara cters per row 20 Number of rows 2 Chara cter configuration 5x7 dot matrix Chara cter He ight 9.
M agnetic Stripe Re ader The MSR is a USB 1.1 device which rea ds all three data stri pes on sta ndard credit cards or driver’s licenses conf orming to ISO/ANSI sta ndards. The MSR will have f oreign la nguage capa bility . The credit card is rea d by sliding the credit card through the MSR, stri pe side toward the display , forward or ba ckward.
2.Omni-Dire ctional sca nner (Elo P/N E787026) specifications. a. Ability to generate omni-directional sca nning pattern b. M a xi mum perf orma nce c. 2-D sca nning a bility (PDF417, M icroPDF) d. USB powered e. Ea sy communication between host a nd sca nner f.
1-6 Elo T ouchmonitor User Guide.
C H A P T E R 2 I NST ALLA TION AND S ETUP This chapter discusses how to install your LCD touchmonitor and how to install Elo T ouchSystems driver software.
Product Overview Main Unit Note: Shown with optional peripherals Rear View 2-8 Elo T ouchmonitor User Guide.
Side View Base Bottom View 2-9.
2-10 Elo T ouchmonitor User Guide.
2-1 1.
Kensington TM Lock The Kensington TM lock is a security device that prevents theft. T o find out more a bout this security device, go to http://www.kensington.
USB Interface Connection Y our touchmonitor comes with only one touchscreen connector ca bles: USB ca ble. (For W indows 2000, Me a nd XP syste ms only . ) T o set up the display , please ref er to the f ollowing figures a nd procedures: Remove the Ca ble Cover The ca bles are connected at the ba ck of the monitor .
C AUTION Before connecting the ca bles to your touchmonitor and PC, be sure that the computer a nd touchmonitor are turned of f. N OTE Before conne cting the cable s to the touchmonitor , route all the cables through the hole in the second a s shown in the picture above.
Connect one end of the power cord to the monitor a nd the other end to wall. Connect the power ca ble to the power port in the monitor . 2-15 CONNECTIONS ON UNDERSIDE POWER CABLE POWER POWER.
Connect one end of the video ca ble to the rear side of computer a nd the other to the LCD. T ighten by turning the two thumb screws clockwise to ensure proper grounding.
Connect one end of the speaker ca ble to the speaker port in the computer a nd the other end to the port in the monitor. 2-17 SPEAKER CABLE CONNECTIONS ON UNDERSIDE SPEAKER PORT.
Connect one end of the USB ca ble to the rear side of the computer a nd the other to the LCD monitor. The USB ca ble is for optional touch, MSR, CD a nd Finger Print Rea der . Only one USB ca ble is needed because the device contains a self powered USB 1.
Replace the Cable Cover Then you have attached all the ca ble s to the monitor , gently bring all the ca bles toward the sta ndard so they fit under the cover li p.
Optimizing the LCD Display T o ensure the LCD display works well with your computer , configure the display mode of your graphic card to make it le ss tha n or equal to 1280 x 1024 resolution, a nd make sure the ti ming of the display mode is compatible with the LCD display .
Magnetic Stri pe Rea der No device are needed. T e sting the USB MSR Keyboard Emulation 1 Plug in the device. 2 Open MS W ord. 3 Slide the card through the MSR to view the data. T e sting the USB-HID Cla ss MSR 1 On the CD, browse to T ouch Monitor Peri pheralsM agnetic Stri pe Card Rea der (MSR)Demo.
Barcode Sca nner Driver Installation: 1. Insert your Elo T ouchT ools CD. 2. On the CD, browse to T ouch Monitor PeripheralsBarcode Sca nner StartupDrivers. 3. Double-click on USB7210.msi a nd follow the prompts given by the setup file. 4. Once you have finished installing the a bove: Right click on My Computer a nd click on Properties.
The Sca n Engine turns on the laser a nd is a ble to sca n a nd decode barcodes con- tinuouslywithout the user having to press the trigger (momentary switch). When the Host Appli-cation software detects the DSR input HIGH (HE Switch is OFF), it sends a ‘LevelT rigger’ SSI comma nd to the Symbol Sca n Engine.
Customer Display Driver In stallation: 1. Insert your Elo T ouchT ools CD. 2. On the CD, browse to T ouch Monitor PeripheralsRear Fa cing Customer DisplayDriversUSB Drivers. Click on the folder that ha s the name of your operating syste m f or the nece ssary drivers.
Installing the T ouch Driver Software Elo T ouchSystems provides driver software that allows your touchmonitor to work with your computer . Drivers are located on the enclosed CD-ROM for the f ollowing operat- ing systems: • W indows XP • W indows 2000 • W indows Me • W indows 98 • W indows 95 • W indows NT 4.
Installing the USB T ouch Driver In stalling the USB T ouch Driver f or W indows XP , Windows 2000, Me a nd 98 1 Insert the Elo CD-ROM in your computer’s CD-ROM drive. If W indows XP , W indows 2000,W indows 98, or W indows Me starts the Add New Hardware W izard: 2 Choose Next .
C H A P T E R 3 O PERA TION About T ouchmonitor Adjustments Y our touchmonitor will unlikely require a djustment. V ariations in video output a nd a p- plication may require a djustments to your touchmonitor to optimize the quality of the display.
17” LCD Function Key Controls Function 1 Power Switch T urns the display system power on or off . 2 Select Displays the OSD menus on the screen a nd used to select (“Clockwise” a nd “Counter-clockwise” direction) the OSD control options on the screen.
Controls and Adjustment OSD Lock/Unlock Y ou are able to lock a nd unlock the OSD feature. The monitor is shi pped in the unlocked position. T o lock the OSD: 1 Press the Menu button a nd button si multa neously for 2 seconds. A window will a ppear displaying “OSD Unlock”.
OSD Control Options Brightne ss • Ba ckground Lumina nce of the LCD pa nel is a djusted. Contra st • Adjusts the contrast or the value s of color gain (RED, GREEN or BLUE). V -Position • Moves the screen up or down. H-Position • Moves the screen left or right.
Power-Save (No In put) • The LCD pa nel background is cut when there is no signal input (AC line power consumption of 4w or less). Power LED Display & Power Saving General Power Saving Mode When the power switch are switch on , this LED lights in gr een .
CAUTION In order to protect the LCD, be sure to hold the ba se when adjusting the LCD, a nd ta ke care not to touch the screen. 3-32 Elo T ouchmonitor User Guide.
C H A P T E R 4 T ROUBLESHOOTING If you are experiencing trouble with your touchmonitor , refer to the f ollowing ta ble. If the problem persists, plea se conta ct your local dealer or our service center . Elo T echni- cal Support numbers are listed on the la st page of this ma nual.
4-34 Elo T ouchmonitor User Guide.
A-35 C H A P T E R A N A TIVE R ESOLUTION The native resolution of a monitor is the resolution level at which the LCD pa nel is designed to perf orm be st. For the Elo LCD touchmonitor , the native resolution is 1280 x 1024 for the SXGA-17 inch size. In almost all ca ses, screen image s look best when viewed at their native resolution.
As a n exa mple, a SV GA re solution LCD pa nel ha s 800 pixels horizontally by 600 pixels vertically . Input video is also repre sented by the same terms.
C H A P T E R B T OUCHMONIT OR S AFETY This ma nual contains information that is i mporta nt for the proper setup a nd maintena nce of your touchmonitor . Before setting up a nd powering on your new touchmonitor , rea d through this ma nual, especi ally Cha pter 2 (Installation), a nd Chapter 3 (Operation).
Care and Handling of Y our T ouchmonitor The following ti ps will help keep your Elo touchmonitor functioning at the opti mal level. • T o avoid risk of electric shock, do not disa sse mble the brick supply or display unit ca binet. The unit is not user servicea ble.
C H A P T E R C T ECHNICAL S PECIFICA TIONS Display Modes Y our Elo touchmonitor is compatible with the following sta ndard video modes: Ite m Resolution T ype H. Sca n(KHz) V . Sc a n(Hz) Pol. 1 640 x 350 V G A 70Hz 31.47 28.322 2 720 x 400 V G A 70Hz 31.
T ouchmonitor Specifications Model 1729L LCD Display 17.0” TFT Active Matrix Pa nel Display Size 337.92(H) x 270.336(V) mm Pixel Pitch 0.264(H) x 0.2647(V) mm Display Mode V GA 640 x 350 (70 Hz) V G.
AccuT ouch T ouchscreen Specif ication s MECHANICAL Construction T op: Polyester with outside hard-surfa ce coating with clear or a ntiglare finish. Inside: T r a nsparent conductive coating. Bottom: Glass substrate with unif orm resistive coating. T op a nd bottom layers separated by Elo-patented se parator dots.
IntelliT ouch T ouchscreen Specif ications MECHANICAL Positional Accura cy Sta ndard deviation of error is less tha n 0.080 in. (2.03 mm). Equate s to less tha n ±1%. T ouchpoint Density More tha n 100,000 touchpoints/in2 (15,500 touchpoints/cm2). T ouch Activation Force T ypically less tha n 3 ounces (85 grams).
Infrared T ouchscreen Specif ication s MECHANICAL Input Method Input Method Finger or gloved ha nd activation Electrical Positional Accuracy T ypical centroid accura cy: 2 mm with 1 mm ST D error Reso.
C-44 Elo T ouchmonitor User Guide Acoustic Pulse Recognition Spe cification MECHANICAL Input method Finger , finger nail, gloved ha nd, or stylus a ctivation ELECTRICAL Position accura cy 1% max.
17” LCD T ouchmonitor(ET1729L-XXXA-1-XX-XX-G) Dimensions C-45 17” LCD T ouchmonitor(ET1729L-XXXA-1-XX-G) Dimensions.
C-46 Elo T ouchmonitor User Guide.
R EGULA TOR Y INFORMA TION I. Electrical Safety Information: A) Compli a nce is required with respect to the voltage, frequency , a nd current require- ments indicated on the ma nufa cturer’s la bel.
This Information T echnology Equipment (ITE) is required to have a CE M ark on the ma nufa cturer’s la bel which mea ns that the equi pment ha s been tested to the following Directive s a nd Sta nda.
49 "The a pplication of this monitor is restricted to special controlled luminous environments.The screen surfa ce trend to reflect a nnoying light of la mps a nd sunlight. T o avoid these reflections the monitor should not be positioned in front of a window or directed to luminaries.
50 Elo T ouchmonitor User Guide.
W ARRANTY Except a s otherwise stated herein or in a n order a cknowledgment delivered to Buyer, Seller warra nts to Buyer that the Product shall be free of defects in materi als a nd workma nship. W ith the exception of the negoti ated warra nty periods; the warra nty for the touchmonitor a nd components of the product is 2 years.
THESE REMEDIES SHALL BE THE BUYER’S EXCLUSIVE REMEDIES FOR BREACH OF W ARRANTY . EXCEPT FOR THE EXPRESS W ARRANTY SET FOR TH ABOVE, SELLER G RANTS NO OTHER W ARRANTIES, EXPRESS OR IMPLIED BY ST A TU.
Numerics 17.0" LCD T ouchmonitor (1729L-XXW A-1-XX-G) Dimensions, 45 A About T ouchmonitor Adjustments, 27 AccuT ouch T ouchscreen Specifications, 41 Acoustic Pulse Re cognition Specification, 44.
O One-Dimensional sca nner specifications, 4 Omni-Dimension al sca nner specif ications, 4 Optical, AccuT ouch, 41 Optical, IntelliT ouch, 42 Optical, IR, 43 Optimizing the LCD Display , 20 OSD Contro.
© 2007 Elo T ouchSystems Inc. Printed in USA Check out Elo TouchSystems Web site! www.elotouch.com Get the latest... • Product information • Specifications • News on upcoming events • Press release • Software drivers Getting in Touch with Elo To find out more about Elo’s extensive range of touch solutions, visit our Web site at www.
デバイスElo TouchSystems 1729Lの購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Elo TouchSystems 1729Lをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはElo TouchSystems 1729Lの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Elo TouchSystems 1729Lの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Elo TouchSystems 1729Lで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Elo TouchSystems 1729Lを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はElo TouchSystems 1729Lの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Elo TouchSystems 1729Lに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちElo TouchSystems 1729Lデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
