AlesisメーカーFusionの使用説明書/サービス説明書
ページ先へ移動 of 14
Fusion Document ation Addendum (Covers changes up to OS v1.20).
This page is intentionally left blank..
About this Addendum: The Fusion’s operating system is upgradeable an d allows us to add features and make changes to existing features after the workst ation has left the factory floor.
Version 1.20 1. Sample Based Programs Can Now Co ntain Up To Four Oscillators Up to four multisamples can now be used for sa mple-based program s. Crossfading is available between oscillators one and two. 2. New Parameter Added To Synth Osci llator: “Monophonic Sample Reset”.
6. Live Loop Adjustment The following parameters can now be ed ited while the voice is playing: • Sample loop start • sample loop end • zone loop start • zone loop end • zone loop fine tune. 7. Chained Inserts Up to 4 different Insert effects can now be used simultaneously in series while in Program mode.
8. Envelope shape is variable per stage. Each stage of an envelope is now variable from -100 to +100%, as illustrated below: A Value of 0% in each stage will corres pond to a linear slope. A linear slope goes straight from point A to point B, and is your general plain-vani lla envelope slope.
10. Added Ability To Copy A Volume Folder From The CF Card To The HD And Vice Versa. All contents of a volume can now be copied to d ifferent media types. This will allow for one to back up their hard dr ive contents to CF Card, Copy program banks from the CF card, and even transfer songs - complete with audio - to a CF to share across Fusions.
Select the Hard Drive using the "inc" , "dec" or encoder wheel. You will receive a warning as displayed below: It is important to insure there's nothing on the CF Card with the same name as on the Hard Drive. If you are sure you will not overwrite any files , press "Yes".
1. “Dry Level” parameter now available A new “Dry Level” parameter has been added to each Audio and Synth track. This is a particularly useful feature for sound designers since it allows you to have a much greater level of control over send levels.
4. Export Song to a MIDI file Songs in the Fusion can now be exported to a MIDI song file. Press the “Utility” menu in Song Edit mode and then press the “SongUtil” pag e. Upon pressing the “ExpSong” button, a browse window will allo w you to select a location for the MIDI file to be created in.
Version 1.03 1. Easy Transpose You can transpose the keyboard from the t op-level of any mode without having to enter Global mode. Simply hold the “LOCATE” button and press any key one octave above or below middle C. Any key that you press will becom e middle C on the keyboard.
Version 1.02 1. General MIDI Compatibility Mode General MIDI compatibility has now been added to ensure that your “General MIDI compatible” sequences will play b ack correctly. To turn on this m ode, go to the Global/Settings/MIDI page an d check the “General MIDI” parameter.
Version 1.01 1. The sustain pedal now latches the arpeggiator when the arpeggiator is enabled. In other words, if you hold down the sustain pedal while the arpeggiator is engaged, the arpeggiation pattern will continue to play un til you lift your foot off the pedal.
7-51-0208-A.
デバイスAlesis Fusionの購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Alesis Fusionをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはAlesis Fusionの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Alesis Fusionの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Alesis Fusionで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Alesis Fusionを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はAlesis Fusionの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Alesis Fusionに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちAlesis Fusionデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。