Epic FitnessメーカーEPTL09106.2の使用説明書/サービス説明書
ページ先へ移動 of 34
Serial Number Decal M odel No. EPTL09106.2 Serial No. CAUTION Read all precautions and instruc- tions in this manual before using this equipment. Save this manual for future reference. USER'S MANUAL QUESTIONS? As a manufacturer, we are com- mitted to providing complete customer satisfaction.
T ABLE OF CONTENTS IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3 1. It is the responsibility of the owner to ensure that all users of this treadmill are adequately informed of all warnings and precautions. 2. Use the treadmill only as described. 3. Place the treadmill on a level surface, with at least eight feet of clearance behind it and two feet on each side.
4 2 0. Do not attempt to raise, lower, or move the treadmill until it is properly assembled. (See A SSEMBLY on page 7, and HOW TO FOLD AND MOVE THE TREADMILL on page 24.) You must be able to safely lift 45 pounds (20 kg) to raise, lower, or move the treadmill.
5 50% The decals shown here have been applied in the indicated loca- tions. If a decal is missing, or if it is not legible, call the tele- phone number on the front cover of this manual and re- quest a free replacement decal. Apply the decal in the loca- tion shown.
6 T hank you for selecting the revolutionary EPIC 475 MX t readmill. The 475 MX treadmill offers an impressive array of features designed to make your workouts at home more enjoyable and effective. And w hen y ou’re not exercising, the unique 475 M X tre admil l can be folded up, requiring less than half the floor space of other treadmills.
7 ASSEMBL Y T o hire an authorized service technician to assemble the treadmill, call toll-free 1-800-445-2480. Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials. Do not dispose of the packing materials until assembly is completed.
8 4. Insert the Console Wire Harness (78) and the T V cab le into the Uprights (84) . Set the console assembly on the Uprights (84). Be care- ful to avoid pinch ing the Console Wire Harness (78) and the TV cable.
9 6. Place the treadmill in the storage position (see HOW TO FOLD AND MOVE THE TREADMILL on page 24). Next, place the cylinder end of the Gas Spring (92) near the bracket on the base of the Uprights (84).
10 If you purchase the optional chest pulse sensor (see page 23), follow the steps below to install the receiver included with the chest pulse sensor. 1. Make sure that the key is removed from the con- sole and that the power cord is unplugged. Remove the indicated Screws (3) from the back of the Console Base (85).
HOW TO CONNECT A 75 OHM CATV CABLE 1. Connect a 75 ohm C ATV cable to the 75 ohm terminal near the power cord. HOW TO CONNECT AN EXTERNAL SOURCE USING A CATV CABLE 1 . Connect one end of a 75 ohm CATV cable to the 75 ohm output jack on your external source.
OPERA TION AND ADJUSTMENT T HE PRE-LUBRICATED WALKING BELT Your treadmill features a walking belt coated with high- performance lubricant. IMPORTANT: Never apply sil- icone spray or other substances to the walking belt or the walking platform. Such substances will deteriorate the walking belt and cause excessive wear.
13 ETPF91 105 FEATURES OF THE CONSOLE The treadmill console offers an impressive array of features designed to make your workouts more effec- tive and e njoyab le. When the manual mode of the con- sole is selected, the speed and incline of the treadmill can be changed with the touch of a button.
14 H OW TO TURN ON THE POWER IMPORTANT: If the treadmill has been exposed to c old temperatures, allow it to warm to room tem- perature before turning on the power. If you do not do this, the console displays or other electrical components may become damaged.
15 The right display —This display will show the dis- t ance that you have walked or run, the speed of the w alking belt, the incline level of the treadmill, your pace (in minutes per mile), and the approximate num- bers of calories and fat calories you have burned (see FAT BURNING on page 29).
16 H OW TO USE A PRESET PROGRAM I nsert the key into the console. S ee HOW TO TURN ON THE POWER on page 14. Select a preset program. To select a preset program, press the Program (PRGM.) button repeatedly until “P-1,” “P-2,” “P-3,” “P-4,” “P-5,” “P-6,” “P-7,” or “P-8” appears in the right display.
16 63 2 3 59 60 83 2 33 61 83 83 2 2 2 3 41 5 9 12 1 1 15 10 46 28 47 10 49 48 9 58 51 53 40 52 54 33 57 53 12 15 43 28 55 70 70 32 32 62 45 1 1 66 69 4 3 27 26 5 5 5 83 42 83 93 94 1 1 93 94 5 5 90 9.
84 73 3 76 77 82 22 82 22 79 75 33 74 71 68 68 72 87 86 88 56 37 35 35 18 18 65 8 8 65 31 32 3 44 3 44 31 32 3 3 14 13 3 3 3 3 3 3 3 34 8 8 64 64 8 64 8 21 64 20 3 3 3 85 78 92 33 23 25 33 77 81 32 80 81 32 80 67 67 82 2 82 2 89 89 19 82 22 82 22 87 104 EXPLODED DRA WING—Model No.
17 F ollow your progress with the displays. See step 5 on page 14. Measure your heart rate if desired. See step 6 on page 15. Turn on the fan if desired. See step 7 on page 15. When you are finished exercising, remove the key from the console. When the program ends, make sure that the in- cline of the treadmill is at the lowest setting.
18 H OW TO USE A HEART RATE PROGRAM During heart rate program 9, your heart rate will reach a pproximately 85% of your a ge-predicted maximum heart rate. (Note: Your age-predicted maximum heart rate is calculated by subtracting your age from 220. For example, if you are 30 years old, your age-pre- dicted maximum heart rate is 190 beats per minute).
19 If heart rate program 9 is selected, the target heart r ate setting for the first seg- ment will be shown in the f lashing Current Segment column of the matrix. The target heart rate settings for the next several segments will be shown in the columns to the right.
20 H OW TO CREATE A CUSTOM PROGRAM I nsert the key into the console. S ee HOW TO TURN ON THE POWER on page 14. Select a custom program. To select a custom program, press the Programs (PRGM.) button repeatedly until “P-11” or “P-12” appears in the right display.
21 H OW TO USE A CUSTOM PROGRAM I nsert the key into the console. S ee HOW TO TURN ON THE POWER on page 14. Select a custom program. To select a custom program, press the Program (PRGM.) button repeatedly until “P-11” or “P-12” appears in the right display.
22 H OW TO OPERATE THE PERSONAL TELEVISION IMPORTANT: Before operating the television, you must connect a 75 ohm CATV cable to the 75 ohm terminal on the treadmill. See page 11 for instruc- t ions. Follow the steps below to operate the television. Insert the key into the console.
23 Press the On/Off button again and add or delete cable channels. Note: Complete this step only if you are using analog cable. After all valid cable channels available in your area have been saved into the television’s mem- ory (see step 5 below), you can manually add channels or delete unwanted channels.
24 HOW T O FOLD AND MOVE THE TREADMILL HOW TO FOLD THE TREADMILL FOR STORAGE Before folding the treadmill, adjust the incline to the lowest position. If this is not done, the treadmill may be per- m anently damaged. Next, unplug the power cord. CAUTION: You must be able to safely lift 45 pounds (20 kg) to raise, lower, or move the treadmill.
25 HOW TO LOWER THE TREADMILL FOR USE 1. Hold the upper end of the treadmill with your right hand. Pull the latch knob to the left and hold it. Pivot the frame down until the catch is past the latch pin. 2. Hold the metal frame firmly with both hands , and lower it to the floor.
26 TROUBLESHOOTING Most treadmill problems can be solved by following the steps below. Find the symptom that applies, and follow the steps listed. If further assistance is needed, please see the front cover of this manual. PROBLEM: The power does not turn on SOLUTION: a.
With the help of a second person, carefully raise the Uprights (84) to the position shown. Caref ully pi vot th e H ood (41) off. Locate the Reed Switch (63) and the Magnet (46) on the left side of the Pulley (47). Turn the Pulley until the Magnet is aligned with the Reed Switch.
28 PROBLEM: Television reception is poor S OLUTION: a . Check for the problems listed below and follow the applicable instructions. • Ignition (black spots or horizontal streaks that appear or a pic.
29 CONDITIONING GUIDELINES The following guidelines will help you to plan your ex- ercise program. For more detailed exercise informa- tion, obtain a reputable book or consult your physician.
30 SUGGESTED STRETCHES T he correct form for several basic stretches is shown at the right. Move slowly as you stretch—never bounce. 1 . Toe Touch Stretch Stand with your knees bent slightly and slowly bend forward from your hips. Allow your back and shoulders to relax as you reach down toward your toes as far as possible.
31 P ART LIST—Model No. EPTL09106.2 R1207A To locate the parts listed below, see the EXPLODED DRAWING attached in the center of this manual. K ey No.
Part No. 262678 R1207A Printed in USA © 2007 ICON IP, Inc. ORDERING REPLACEMENT P ARTS T o order replacement parts, see the front cover of this manual. To help us assist you, please be prepared to give the following information: • the MODEL NUMBER of the product (EPTL09106.
デバイスEpic Fitness EPTL09106.2の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Epic Fitness EPTL09106.2をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはEpic Fitness EPTL09106.2の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Epic Fitness EPTL09106.2の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Epic Fitness EPTL09106.2で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Epic Fitness EPTL09106.2を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はEpic Fitness EPTL09106.2の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Epic Fitness EPTL09106.2に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちEpic Fitness EPTL09106.2デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
