EpsonメーカーCX9475Faxの使用説明書/サービス説明書
ページ先へ移動 of 24
Epson Stylus CX9475Fax Start Here ®.
2 Unpack Unpack Caution: Do not open ink cartridge packages until you are ready to install the ink. Cartridges are vacuum packed to maintain reliability.
Turn On 3 Turn On 1. Connect the power cable. Caution: Do not connect to you r computer yet. 2. P ress the P On button..
4 Make Settings Make Settings 1. Select your language and country . Pre s s u or d to select the desired option: Pre s s OK when done. 2. F or the Daylight T ime setting, select Summer if your region uses D aylight Saving T ime and it’ s currently in effect.
Make Settings 5 4. U se the numeric keypad to set the date. 5. P ress u or d to select the time format, then press r . 6. U se the numeric keypad to set the time.
6 Install Ink Cart ridges Install Ink Cartridges Note: Don’t load paper before in stalling the ink cartridges. 1. Lift up the scanner . 2. Open the cartridge cover . 3. Shake the ink cartridges, then unpack them. 4. Remo ve only the yellow tape from each cartridge.
Install Ink Cartr idges 7 5. Insert the cartridges in the holder for each c olor . 6. P ress the cartridges down until they click. 7. Close the ink cartrid ge co ver and press it down until it clicks.
8 Load Paper 9. P ress the OK button to charge ink. Char ging takes about 2 minutes. Caution: Don’t turn off the CX9475Fax while the On light is flashing or you’ll waste ink. Load Paper 1. Open the paper support and pull up its extension. 2. Open the output tray .
Load Paper 9 4. Load paper against the right edge guide and behind the tab, with the printable side face up. Note: Don’t load the paper si deways; always load it short edge first.
10 Connect Phone Cord Connect Phone Cord T o use the CX9475F ax for faxing, connect the included phone cord from a telephone wall jack to the LINE port on the CX9475F ax. T o connect a telephone or answering machine, see the Quick Guide f or instructions.
Install Software and Set Up the Print Server 11 2. Secure the print server to the back of the all-in-one using the included hook- and-loop self stick tape.
12 Install Software and Set Up the Print Server Installing Software an d Connecting the Print Server Y ou need to install the drivers and other software for the all-in-one and print ser ver . F oll ow the on-screen instructions to connect and power on the print server .
Install Software and Set Up the Print Server 13 Configuring the Print Server with Easy Installation F ollow these steps to configure the print server and connect to your wireless network using standard settings: 1. When you see this window , select Easy Installa tion and click Next .
14 Install Software and Set Up the Print Server Configuring the Print Server with Advanced Installation F ollow these steps to configure the print server using custom settings: Note: If you’re installing the all-in-one in an Ad Hoc environment, see “Configuri ng the Print Server and Installing Software for Ad Hoc Mode” on page 15.
Configuring the Print Server and Installing Soft ware for Ad Hoc Mode 15 Configuring the Print Server and Installing Software for Ad Hoc Mode F ollow the instruction s in this section to set up the CX9475F ax for Ad Hoc mode. 1. Plug the included USB cable into the print server and your all-in-one.
16 Configuring the Print Server and Insta lling Software for Ad Hoc Mode 9. Select Wireless Setting from the menu on the left. 10. Enter a unique name for the print server in the ESSID field. 11. Click Next . 12. Select Save Setting from the menu on the left.
Using the Scanner and Card Reader 17 Using the Scanner and Card Reader Before y ou can use your all-in-one ’ s scanner and card reader , you need to connect to it using MFP Manager . When you ’ re done, disconnect from the all-in-one to allow other network users to access these functions.
18 Solving Problems Solving Problems Check the solutions below if you ’ re having trouble installing your all-in-one. The print server can ’ t be found ■ Make sur e that the print server is turned on and connected corr ectly . ■ Make sure the antenna is connected to the print server and that it is upright.
Solving Problems 19 ■ If your wireless access point has MAC addr ess filtering enabled, make sure you added the print ser ver ’ s MAC address to the list of all o wed devices to connect to the access point.
20 Where to Get Help Where to Get Help Epson Technical Support Int er net Sup po rt Visit E pson ’ s support website at epson.com/support and select your product for solutions to common problems. Y ou can download drivers and documentation, get F AQs and troubleshooting advice, or e-mail E pson with your questions.
Epson and Epson Stylus are re gistered trademarks, and Epso n Exceed Your Vision is a trademark of Seiko Epson Corporation. General Notice: Other product names used he rein are for identification purposes only and may be trademarks of their respective ow ners .
.
.
CPD-25134 Printed in USA.
デバイスEpson CX9475Faxの購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Epson CX9475Faxをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはEpson CX9475Faxの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Epson CX9475Faxの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Epson CX9475Faxで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Epson CX9475Faxを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はEpson CX9475Faxの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Epson CX9475Faxに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちEpson CX9475Faxデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。