Alliance Laundry Systemsメーカー835HRの使用説明書/サービス説明書
ページ先へ移動 of 21
Alliance Fitness Treadmills Manufactured in the USA by: KEYS Fitness Products, LP P.O. Box 551239 Dallas, Texas 75239 www.keysfitness.com O WNER’S MANU AL Alliance 815/835HR TREADMILL.
2 T ABLE OF CONTENTS PAGE Table of Contents 2 Important Safety Information 3 Before You Start 4 Warm Up Exercises 5 Unpacking and Moving Instructions 6 Power Requirements 7 Console Functions and Descr.
3 Impor tant Saf ety Inf or ma tion NING! 1) WARNING: Before using this treadmill or st arting any exercise prog ram, consult your physician. This is especially important for persons over the age of 35 and /or persons with pre-existing health pro blems.
4 Bef or e Y ou Star t Thank you for purchasing an Al liance trea dmill! This qual ity product you have chosen was designed to meets y our needs for cardiovascular exercise. • Before you start, please read the Owner’ s Manual and becom e familiar with the operation of your new treadmill.
5 W ar m Up Ex er cises NING! WARM UP FIRST ! Warming up prepares the body fo r e xercise by increasing ci rculation, supplying more oxygen to the muscles and rais ing body temperatur e. Begin each workout with 5 to 10 minutes of stretching and light exercise to warm up.
6 Unpac king and Mo ving Instr uctions No Assembly Required! Alliance treadmills are shipped in one piece and fully assembled. After opening the box, remove any packing materials from the tr eadmill. Do not throw away any packing materials until the unit is working properly.
7 P o wer R equir ements WARNING! IMPROPER CONNEC TION OF THE EQUIPM ENT GROUNDING CO NNECTOR CAN RESULT IN A RISK OF AN ELECTRIC SHOCK. CH ECK WITH A QUALIFIED ELECTRICIAN OR SERVICE MAN IF YOU ARE IN DOUBT AS TO WHETHER THE PRODUCT IS PROPERLY GROUNDED.
8 Console Functions and Descriptions POWER - Press to on. Allow 6-8 seconds while the electronics perform a self check prior to pressing other START/STOP - This button starts the treadmill belt moving. There is a 4 second countdown built in as a safety feature to let you know the treadmill belt is about to start moving.
9 There are five display windo ws on the control panel to provide feedb ack information. TIME WINDOW • TIME: Indicates elapsed time after pressin g start in minutes and second s (0-99 minutes, 0-59 .
10 INCLINE WINDOW • INCLINE: Indicates incline in percent of grade 0-12% in 1 increments • PULSE (835HR Model Only): In dicates current heart rate • HEART “ ♥ ” (835HR Model only): In dicates control panel is receiving a signal from heart rate transmitter.
11 Pr og r am and Oper a ting Instr uctions QUICK ST ART / MANUAL MODE • Plug into a standard wall outlet (110-Volt AC, 15-amp circuit). • ATTACH THE RED SAFETY KEY TO CENTER OF CONSOLE . • Stand on the treadmill and straddle belt. • Press POWER button.
12 PROGRAM MODE • Plug into a standard wall outlet (110-Volt AC, 15-amp circuit). • ATTACH THE RED SAFETY KEY TO THE C ENTER OF THE CONSOLE . • Stand on the treadmill and straddle belt. • Press POWER button. Th ere will be an eight (8) s econd delay after pressing the POWER butt on bef ore data can be entered.
13 Pr og r am and Oper a ting Instr uctions Hear t Ra te Contr ol Instr uctions (835HR onl y) HEAR T RA TE PROGRAM MODE The Heart Rate program is designed to kee p your heart ra te a desire d level of “beats per minute” by auto matically adjusting the incline.
14 Pr og r am Pr ofiles The FAT BURN program is designed to vary treadmill elevation while maintaining a constant walking speed. Set the desired maxim um speed and incline, and the tread mill will automatically change the inclin e to the set amount, alternating in segments 2-3, 5-6, an d 8-9.
15 Belt Adjustment and T ension WARNING! Do not overtighten ro llers! This will cause premat ure roller bearing failure! Belt adjustment and tension perfor ms two functions: adj ustment for tension a nd centering. Your new treadmill comes pre-adjusted from t he factory for tension and centering.
16 Maintenance Instr uctions WARNING! Before performing any ma intenance to your treadmill, always unplug the power cord from the surge protector. CLEANING Routine cleaning of your Alliance Fitnes s treadmill will extend the life of your treadmi ll.
17 T roubleshooting Guide T readmill will not start. 1) Is the RED Safety Key Attached t o the Console? 2) Make sure the power cord is plugged into a surge protector, the surg e protector is plugged into a properly grounded outle t, and the surge protector is turned on.
18 KEY # PA RT # DESCRIPTION QTY KEY # PA RT # DESCRIPTION QTY 1 UP 3K ASSB UPRIGHT ASSEMBLY 1 53 08-000 4 CIRCUIT BREAKER 15 AMP 1 2 20-000 1 DECK ASSEMBLY 1 54 13-001 7 TELCO HARNESS FOR HEART RATE 1 3 20-000 3 ELEVATION ASSEMBL Y 1 55 11-000 2 REAR ELEVATION BUSHING 2 4 SES EXT S.
19 Exploded V iew.
20 Exploded V iew.
21 Alliance 815 and 835HR Treadmills manfactured by K EYS FITNESS PRODUC TS, LP – LIMITED WARRANTY PLEASE CONSULT YOUR PHYSIC IAN BEFORE USIN G THIS PRODUC T.
デバイスAlliance Laundry Systems 835HRの購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Alliance Laundry Systems 835HRをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはAlliance Laundry Systems 835HRの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Alliance Laundry Systems 835HRの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Alliance Laundry Systems 835HRで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Alliance Laundry Systems 835HRを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はAlliance Laundry Systems 835HRの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Alliance Laundry Systems 835HRに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちAlliance Laundry Systems 835HRデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。