EpsonメーカーXP-300の使用説明書/サービス説明書
ページ先へ移動 of 212
XP-300 User's Guide.
.
Contents XP-300 User's Guide.................................................................................................................................. 11 Product Basics .....................................................................
Copying ...................................................................................................................................................... 41 Copying Documents or Photos .............................................................
Cancelling Printing Using a Product Button ........................................................................................ 71 Scanning ...........................................................................................................
Using Memory Cards With Your Product .............................................................................................. 117 Inserting a Memory Card ...........................................................................................
Cleaning the Print Head Using a Computer Utility ................................................................... 148 Print Head Alignment .............................................................................................................
Product Icon Does Not Appear in Windows Taskbar ................................................................... 175 Error After Cartridge Replacement .............................................................................................. 175 Printing is Slow .
Scanned Image Edges are Cropped ........................................................................................... 191 Solving Memory Card Problems ..............................................................................................
.
XP-300 User's Guide Welcome to the XP-300 User's Guide . 11.
Product Basics See these sections to learn about the basic features of your product. Setting Up the Control Panel Product Parts Locations The Power Off Timer Epson Connect Solutions for Smartphones, Tablets, and More Setting Up the Control Panel See these sections to set up the control panel for use.
6 The start button 7 The stop button Parent topic: Setting Up the Control Panel Adjusting Control Panel Position You can adjust the position of the control panel to make it easier to use. • To raise the control panel, lift it up from the bottom. • To lower the control panel, squeeze the release bar and gently push the panel down.
4. Press the OK button. 5. Press the arrow buttons to select a language and press the OK button. 6. Press the home button to exit. Parent topic: Setting Up the Control Panel Selecting Wireless Network Settings From the Control Panel You can select or change wireless network settings using your product control panel.
3. Press the arrow buttons to select Wi-Fi Setup Wizard and press the OK button. 4. Press the arrow buttons to select the name of your wireless network and press the OK button. If you don't see your wireless network's name, you can enter it manually.
• To switch between ABC (uppercase), abc (lowercase), or 123 (numbers and symbols), press the home button. • To delete characters, press the left arrow. • When you finish entering characters, press the OK button. 6. If you want to print a network setup report, press the start button.
Product Parts - Top 1 Sheet feeder 2 Paper support 3 Output tray 4 Paper stopper 5 Feeder guard 6 Edge guide 17.
1 Document cover 2 Scanner glass 3 Control panel 4 Release bar (beneath) 5 Memory card slot 6 Memory card access light Parent topic: Product Parts Locations 18.
Product Parts - Inside 1 Scanner unit 2 Ink cartridge holder in home position Parent topic: Product Parts Locations 19.
Product Parts - Back 1 AC inlet 2 USB port Parent topic: Product Parts Locations The Power Off Timer The product turns off automatically if it is not used for a period of time after it enters sleep mode. You can adjust the time period before power off, but increasing the time reduces the product's energy efficiency.
3. Press the left or right arrow buttons to select Printer Setup and press the OK button. 4. Press left or right arrow buttons to select Power Off Timer and press the OK button. You see this screen: 5. Press the up or down arrow buttons to select the length of time after which you want the product to automatically turn off when it is not in use.
3. In the drop-down menu, select the length of time after which you want the product to automatically turn off when it is not in use. 4. Click Send . 5.
3. Select the length of time after which you want the product to automatically turn off when it is not in use as the Power Off Timer setting. 4. Click Apply .
1. Set up your product for network printing as described on the Start Here sheet. 2. If you did not already set up Email Print when you installed your product software, visit www.epson.com/connect to learn more about Email Print, check compatibility, and get detailed setup instructions.
1. Connect your device to the same wireless network that your Epson product is using. 2. Print a network status sheet. 3. Locate your product's IP address on the network status sheet. 4. Enter the IP address into the address bar of a web browser.
Loading Paper Before you print, load paper for the type of printing you will do. Loading Paper for Documents Loading Paper for Photos Loading Envelopes Paper Loading Capacity Available EPSON Papers Bo.
3. Pull out the output tray and open the paper stopper on the end. Note: If you print on legal-size or longer paper, leave the paper stopper closed. 4.
5. Insert paper, glossy or printable side up and short edge first, against the right side. If you are inserting a stack of paper, fan the sheets first and tap the stack on a flat surface to even the edges. 6. Slide the edge guide against the paper, but not too tightly.
• Load paper short edge first, no matter which way your document faces. • Load letterhead or pre-printed paper top edge first. • Do not load paper above the arrow mark inside the edge guide. • Check the paper package for any additional loading instructions.
3. Pull out the output tray and open the paper stopper on the end. 4. Slide the edge guide left. 30.
5. Insert paper, glossy or printable side up and short edge first, against the right side. If you are inserting a stack of paper, fan the sheets first and tap the stack on a flat surface to even the edges. 6. Slide the edge guide against the paper, but not too tightly.
• Load paper short edge first, no matter which way your photo faces. • Do not load paper above the arrow mark inside the edge guide. • Check the paper package for any additional loading instructions. Parent topic: Loading Paper Related references Paper Loading Capacity Loading Envelopes You can print on plain paper envelopes in this size: No.
3. Pull out the output tray and open the paper stopper on the end. 4. Slide the edge guide left. 33.
5. Load up to 10 envelopes against the right side. Load them printable side up and flap edge left. 6. Slide the edge guide against the envelopes, but not too tightly. 7. Flip the feeder guard back. Note: If you have trouble loading a stack of envelopes, press each envelope flat before loading it or load one envelope at a time.
Paper Loading Capacity Paper type Load up to this many sheets Plain paper - Letter (8.5 × 11 inches Approximately 100 sheets* [216 × 279 mm])** Epson Bright White Paper 80 sheets Epson Presentation .
Paper Type Size Part number Sheet count Epson Bright White Paper Letter (8.5 × 11 inches S041586 500 [216 × 279 mm]) Epson Photo Paper Glossy 4 × 6 inches (102 × 152 mm) S041809 50 S042038 100 Letter (8.
Paper Type Size Part number Sheet count Epson Premium Presentation 8 × 10 inches (203 × 254 mm) S041467 50 Paper Matte Letter (8.5 × 11 inches S041257 50 [216 × 279 mm]) S042180 100 Epson Premium Presentation Letter (8.5 × 11 inches S041568 50 Paper Matte Double-sided [216 × 279 mm]) Epson Ultra Premium Presentation Letter (8.
Paper or Media Type Settings For this paper Select this paper Type or Media Type setting Plain paper Plain Paper/Bright White Paper Epson Bright White Paper Epson Presentation Paper Matte Epson Iron-o.
Placing Originals on the Product Follow the instructions here to place your original documents or photos on the product. Caution: Do not place anything on top of your product or use its cover as a writing surface to avoid damaging it.
Note: You can place multiple originals on the scanner glass. Just make sure they are at least 0.8 inch (20 mm) away from each other. 3. Close the document cover gently to keep your original in place.
Copying See the information here to copy documents or photos using your product. Note: Copies may not be exactly the same size as your originals. Copying Documents or Photos Copying Documents or Photos You can copy color or black-and-white documents or photos onto various sizes and types of paper, including Epson special papers.
• B&W : for black-and-white copies 7. To view the print settings for the copies, press the OK button. You see the current settings: 8. To change the print settings, press the down arrow button and select the necessary settings. 9. When you are ready to copy, press the start button.
2. Do the following as necessary to select settings: • To change the selected option for the current print setting, press the left or right arrow button and select the option you want.
Paper type loaded Paper Type setting Epson Premium Presentation Paper Matte Photo Paper Epson Premium Photo Paper Glossy Epson Premium Photo Paper Semi-gloss Epson Ultra Premium Photo Paper Glossy Parent topic: Selecting Print Settings for Copies Paper Size Settings - Copying Select the Paper Size setting that matches the paper you loaded.
Copying option Available settings Description Reduce/Enlarge Actual Size Copies at 100% size, unless you select a different percentage as the Custom Size setting Auto Fit Automatically sizes the image.
Printing From a Computer Before printing from your computer, make sure you have set up your product and installed its software as described on the Start Here sheet. Note: If you have an Internet connection, it is a good idea to check for updates to your product software on Epson's support website.
2. Select the print command in your application. Note: You may need to select a print icon on your screen, the Print option in the File menu, or another command. See your application's help utility for details. 3. If necessary, select your product name as the printer you want to use.
5. Select the type of paper you loaded as the Type setting. Note: The setting may not exactly match the name of your paper. Check the paper type settings list for details. 6. Select the size of the paper you loaded as the Size setting. Note: You can also select the User Defined setting to create a custom paper size.
Fix Photo Improves the color, contrast, and sharpness of flawed photos. Note: Fix Photo uses a sophisticated face recognition technology to optimize photos that include faces. For this to work, both eyes and the nose must be visible in the subject's face.
2. Select the Paper & Quality Options settings for your printout: • Select the type of paper you loaded. Note: Check the paper type settings list for details. • Select the print quality setting you want to use. Note: Check the print quality setting list for details.
Note: You must select a compatible borderless paper type and size to print without borders. Check the borderless paper compatibility list for details. 3. Select Portrait or Landscape as the orientation of your document or photo. Note: If you are printing an envelope, select Landscape .
Best Photo For photos and graphics with high print quality. Photo RPM For the best print quality, but the slowest print speed. Parent topic: Selecting Advanced Print Settings - Windows Advanced Print Options - Windows You can select any of the print options to customize your print.
ICM Lets you turn off color management in your printer software using the Off (No Color Adjustment) option. You can then manage color using only your application software.
• To print multiple pages on one sheet of paper, or print one image on multiple sheets of paper, select the Multi-Page checkbox and select the options you want.
2. Place your cursor over a Printing Presets option to view its list of settings. 3. Use any of the available options on the screen to control your printing presets.
2. Click OK or Print to start printing. Checking Print Status - Windows Parent topic: Printing with Windows Checking Print Status - Windows During printing, you see this window showing the progress of your print job. It allows you to control printing and check ink cartridge status.
• To cancel printing, click Stop . • To see print jobs lined up for printing, click Print Queue . • To check ink status, click Check Ink Levels .
3. Select the print settings you want to use as defaults in all your Windows programs. 4. Click OK . These settings are now the defaults selected for printing.
You see the printer settings window. 3. Click the Maintenance tab. You see the maintenance options: 4. Select the language you want to use as the Language setting. 5. Click OK to close the printer software window. The printer software screens appear in the language you selected the next time you access them.
Changing Automatic Update Options Your printer software for Windows automatically checks for updates to the product software. You can change how often the software checks for updates or disable this feature. 1. Right-click the product icon in the Windows taskbar.
Selecting Basic Print Settings - Mac OS X Selecting Page Setup Settings - Mac OS X Selecting Print Layout Options - Mac OS X Managing Color - Mac OS X Selecting Printing Preferences - Mac OS X Printin.
Note: The print window may look different, depending on the version of Mac OS X and the application you are using. 5. Select the Copies and Pages settings as necessary. Note: If you do not see these settings in the print window, check for them in your application before printing.
7. Select any application-specific settings that appear on the screen, such as those shown in the image above for the Preview application. 8. Select Print Settings from the pop-up menu.
9. Select the type of paper you loaded as the Media Type setting. Note: The setting may not exactly match the name of your paper. Check the paper type settings list for details. 10. Select the Print Quality setting you want to use. 11. Select any of the available print options.
Photo RPM For the best print quality, but the slowest print speed. Parent topic: Selecting Basic Print Settings - Mac OS X Print Options - Mac OS X You can select any of the print options to customize your print. Some options may be unavailable, depending on other settings you have chosen.
1. Select the size of the paper you loaded as the Paper Size setting. If you are printing a borderless photo, select the Borderless checkbox or a paper size with a Borderless option. You can also select a custom setting to create a custom paper size. Note: You must select a compatible borderless paper type and size to print without borders.
• To print multiple pages on one sheet of paper, select the number of pages in the Pages per Sheet pop-up menu. To arrange the print order of the pages, select a Layout Direction setting. • To print borders around each page on the sheet, select a line setting from the Border pop-up menu.
Note: The available settings on the Color Options menu depend on the option you selected on the Color Matching menu. 4. Select one of the available options.
Parent topic: Managing Color - Mac OS X Selecting Printing Preferences - Mac OS X You can select printing preferences that apply to all the print jobs you send to your product. 1. In the Apple menu or the Dock, select System Preferences . 2. Select Print & Fax or Print & Scan , select your product, and select Options & Supplies .
Quiet Mode Lessens noise during printing when you select Plain Paper/Bright White Paper as the paper Type or Media Type setting. Permit temporary black printing Allows you to print using black ink when a color ink cartridge is expended. High Speed Printing Speeds up printing, but may reduce print quality.
Checking Print Status - Mac OS X During printing, you can view the progress of your print job, control printing, and check ink cartridge status. 1. Click the printer icon when it appears in the Dock. You see the print status window: 2. Select the following options as necessary: • To cancel printing, click the print job and click Delete .
Scanning You can scan original documents or photos and save them as digital files. Starting a Scan Selecting Epson Scan Settings Scanning with Mac OS X 10.6/10.7/10.8 Using Image Capture Scanning Special Projects Starting a Scan After placing your original documents or photos on your product for scanning, start scanning using one of these methods.
4. Press the arrow buttons to select a scan option and press the OK button. • To PC saves your scan file directly to your computer or as an image capture in Mac OS X 10.6/10.7. • To PC (PDF) saves your scan as a PDF file to your computer or as an image capture in Mac OS X 10.
Changing Default Scan Button Settings Parent topic: Starting a Scan Changing Default Scan Button Settings You can view or change the default scan settings your product uses when you scan to your computer using the product buttons. You do this using the Event Manager program.
You see an Epson Scan window like this: Parent topic: Starting a Scan Related tasks Scanning with Mac OS X 10.6/10.7/10.8 Using Image Capture 75.
Related topics Selecting Epson Scan Settings Starting a Scan from a Scanning Program You can start Epson Scan from a scanning program to select scan settings, scan, and open the scanned image in the program.
Parent topic: Starting a Scan Related tasks Scanning with Mac OS X 10.6/10.7/10.8 Using Image Capture Related topics Selecting Epson Scan Settings 77.
Selecting Epson Scan Settings After starting Epson Scan, you can select settings in various modes to customize your scan. Scan Modes Selecting the Scan Mode Scanning in Full Auto Mode Scanning in Home.
Parent topic: Selecting Epson Scan Settings Related tasks Scanning in Full Auto Mode Scanning in Home Mode Scanning in Office Mode Scanning in Professional Mode Scanning in Full Auto Mode When you sca.
80.
2. To select image adjustment options or change your scanned file settings, click Customize , select the settings, and click OK . • To choose any of the available image adjustment options, select the checkbox for the option. • To change the scanned file settings, click File Save Settings .
Related tasks Selecting Scan File Settings Available Image Adjustments - Full Auto Mode You can select these image adjustment options in Epson Scan Full Auto Mode. Dust Removal Removes dust marks from your originals automatically. Color Restoration Restores the colors in faded photos automatically.
2. Select the Document Type setting that matches your original, such as Photograph or Text/Line Art . 3. Select the Image Type setting that matches your original.
4. Select the way you plan to use your scanned image as the Destination setting. (The Resolution setting is selected automatically based on the Destination setting you choose.) • Screen/Web : Select this option for images you will e-mail, view on a computer screen, or post on the web.
Selecting a Scan Area - Home Mode You can select a specific area in your preview image to include in your scanned image. You can select the entire image area or a portion of it. You can even select multiple scan areas to create multiple scanned images of different areas (Normal Preview mode only).
• Normal preview : Click the Auto Locate icon to create a marquee (dotted line) on the preview image. 86.
2. Do the following, as necessary, to work with the selected scan area: • If the marquee is correct, continue with the next step. • To move the marquee, click inside the scan area and drag the marquee where you want it.
• Normal preview : To create additional marquees (up to 50), click the Copy Marquee icon to copy the existing marquee and paste it on the preview image. Note: If you draw multiple marquees, make sure you select the All button in the Preview window before you scan.
Dust Removal Removes dust marks from your originals automatically. Text Enhancement Sharpens the appearance of letters in text documents. Auto Area Segmentation Makes grayscale images clearer and text recognition more accurate by separating the text from the graphics.
3. Do the following, as necessary, to work with the selected scan area: • To move the marquee, click inside the scan area and drag the marquee where you want it. • To resize the scan area, place your cursor over the edge or corner of the marquee, then click and drag the edge where you want it.
4. To create a scanned image size that is not available in the Target Size list, click the Customize option. 5. Name the custom size, enter the size, click Save , and click OK . Then create a scan area on the preview image. The marquee is automatically proportioned for your custom scan size.
2. Select the Image Type setting that matches your original. 3. Select the Document Source setting indicating where you placed your original. 4. Select the Size and Orientation settings that match your original. 5. Select the Resolution setting you want to use for your scan.
Epson Scan previews your original and displays the result in a separate Preview window. 7. If desired, select the area in your preview image that you want to scan (scanned image area). 8. Select any of the image adjustment settings you want to use. Before making adjustments, click the image or scanned image area in the Preview window.
1. In the Preview window, click the Auto Locate icon to create a marquee (dotted line) on the preview image. 2. Do the following, as necessary, to work with the selected scan area: • If the marquee is correct, continue with the next step. • To move the marquee, click inside the scan area and drag the marquee where you want it.
• To resize the scan area, place your cursor over the edge or corner of the marquee, then click and drag the edges where you want them. (Hold down the Shift key as you resize the marquee to retain the same width/height proportions.
Descreening Removes the ripple pattern that might appear in subtly shaded image areas, such as skin tones. This option improves results when scanning magazines or newspapers. (The results of descreening do not appear in the preview image, only in your scanned image.
97.
2. Select the Document Type setting that matches your original, such as Reflective for documents or photos. 3. Select the Document Source setting indicating where you placed your original. 4. Select the specific type of original you are scanning as the Auto Exposure Type setting: Document or Photo .
Available Image Types - Professional Mode You can select these Image Type options in Epson Scan Professional Mode. 24-bit Color Select this setting for color photos. Color Smoothing Select this setting for color graphic images, such as charts or graphs.
• Thumbnail preview : Your scan area is selected automatically, but you can change it. Place your cursor in one corner of the desired scan area, then click and drag the cursor to the opposite corner to create a marquee (dotted line) on the preview image.
2. Do the following, as necessary, to work with the selected scan area: • If the marquee is correct, continue with the next step. • To move the marquee, click inside the scan area and drag the marquee where you want it.
• Normal preview : To create additional marquees (up to 50, if available), click the Copy Marquee icon to copy the existing marquee and paste it on the preview image.
Descreening Removes the ripple pattern that might appear in subtly shaded image areas, such as skin tones. This option improves results when scanning magazines or newspapers. (The results of descreening do not appear in the preview image, only in your scanned image.
Threshold Adjusts the level at which black areas in text and line art are delineated, improving text recognition in OCR (Optical Character Recognition) programs. Parent topic: Scanning in Professional Mode Selecting a Scan Size - Professional Mode You can reduce or enlarge the size of your image as you scan.
3. Do the following, as necessary, to work with the selected scan area: • To move the marquee, click inside the scan area and drag the marquee where you want it. • To resize the scan area, place your cursor over the edge or corner of the marquee, then click and drag the edge where you want it.
4. To create a scanned image size that is not available in the Target Size list, click the Customize option. 5. Name the custom size, enter the size, click Save , and click OK . Then create a scan area on the preview image. The marquee is automatically proportioned for your custom scan size.
• Unlock icon: Unlocks the width/height proportions of the scanned image size so you can adjust it without constraint. Parent topic: Scanning in Professional Mode Image Preview Guidelines You can preview your scanned image so you can adjust the scan settings using the preview as a guide.
Parent topic: Selecting Epson Scan Settings Selecting Scan File Settings You can select the location, name, and format of your scan file on the File Save Settings window. You can also select various optional settings that control how Epson Scan behaves when you scan and save files.
1. Do one of the following to select the folder in which you want to save your scanned image: • Click the button for one of the displayed folders. • Click the Other button, click the Browse or Choose button, and select a folder. 2. Type in a stem file name in the Prefix field.
PRINT Image Matching II (*.jpg or *.tif) File formats that include Epson PRINT Image Matching II data for enhanced quality and a wider color range (does not affect the way the image displays on the screen). TIFF (*.tif) A file format created for exchanging data between many programs, such as graphic and DTP software.
4. Select the Scan Mode setting indicating where you placed your original (if available). Select any other scan settings as necessary. 111.
5. Select the folder in which you want to save your scanned file in the Scan To pop-up menu. 6. Click Scan . Your scanned file is saved in the folder you selected.
1. Place your original on your product for scanning. 2. Start Epson Scan. 3. Select the scan mode you want to use. 4. Select the scan settings for your scan. 5. Preview your image. 6. When you finish selecting all your settings, click Scan . You see the File Save Settings window.
8. Select any other settings you want to use on the File Save Settings window. Click the Options button to access additional settings. 9. Click OK . Epson Scan scans your document and you see this window: 10. Choose one of the following options on the screen: • If you are scanning only one page, click Save File .
Parent topic: Scanning Special Projects Related tasks Selecting the Scan Mode Selecting Scan File Settings Related topics Starting a Scan Selecting Epson Scan Settings Restoring Photo Colors as You Scan You can restore the colors in faded photos as you scan them using Epson Scan's Color Restoration setting.
Related tasks Selecting the Scan Mode Related topics Starting a Scan Selecting Epson Scan Settings 116.
Using Memory Cards With Your Product Follow the instructions here to work with a memory card inserted into your product. Inserting a Memory Card Printing from a Memory Card Transferring Photos on a Memory Card Inserting a Memory Card Insert only one memory card at a time into a memory card slot on your product.
Caution: Do not remove a memory card or turn off your product while the memory card access light is flashing or you may lose data from the memory card.
• microSDXC* • microSDHC* • microSD* Parent topic: Inserting a Memory Card Memory Card File Specifications You can insert memory cards in your product containing files that meet these specifications.
1 Memory card access light 2. If your product is connected to your computer using a USB cable, do one of the following: • Windows : Open the My Computer , Computer , or Windows Explorer utility. Then right-click the name of your memory card (listed as a removable disk) and select Eject .
3. Press the arrow buttons to scroll through your photos to display one that you want to view or print. 4. Press the arrow buttons to select one or more copies of the photo (up to 99). 5. To view additional photos and select others for printing, press the arrow buttons and repeat the selections above.
8. When you are ready to print, press the start button. Note: To cancel printing, press the stop button. Parent topic: Viewing and Printing Photos Related tasks Selecting Print Settings for Photos Dis.
Print Setting Options - Photo Mode Select these print settings options when printing photos displayed on the LCD screen. Print settings Available Options Description Paper Size Various paper sizes Ind.
Related tasks Removing a Memory Card Transferring Photos from a Memory Card to Your Computer You can transfer photos to and from a memory card inserted into your product's memory card slots and a computer connected to your product. Note: Do not transfer photos to and from a memory card while you are printing from the memory card.
Replacing Ink Cartridges When an ink cartridge is expended, you need to replace it. You may also need to replace a cartridge that is more than six months old, if your printouts do not look their best, even after cleaning and aligning the print head.
2. Press the OK button. You see this screen: Note: The display is different depending on which ink cartridges are low or expended, if any. Displayed ink levels are approximate. 3. Do one of the following: • If you are finished, select Back and press the OK button.
• If you want to replace an ink cartridge now, select Replace now and press the OK button. When you finish replacing cartridges, press the OK button again. Note: Depending on the color of the expended cartridge and how you are printing, you may be able to continue printing temporarily.
2. Replace or reinstall any ink cartridge indicated on the screen. Note: If any of the cartridges installed in the product is broken, incompatible with the product model, or improperly installed, Epson Status Monitor will not display an accurate cartridge status.
4. Deselect the See Low Ink Reminder alerts checkbox at the bottom of the screen. 5. To disable promotional offers, deselect the Display Epson Offers checkbox.
Related topics Printing With Black Ink and Expended Color Cartridges Checking Cartridge Status with Mac OS X You can check your cartridge status using a utility on your Mac. 1. Do one of the following: • Mac OS X 10.6/10.7/10.8 : In the Apple menu or the Dock, select System Preferences .
3. Do the following as necessary: • You can update the ink cartridge status by clicking Update . • Replace or reinstall any ink cartridge indicated on the screen. Note: Depending on the color of the expended cartridge and how you are printing, you may be able to continue printing temporarily.
Related tasks Removing and Installing Ink Cartridges Related topics Printing With Black Ink and Expended Color Cartridges Purchase Epson Ink Cartridges You can purchase genuine Epson ink and paper at Epson Supplies Central at www.epson.com/ink3 (U.S. sales) or www.
Removing and Installing Ink Cartridges Make sure you have your replacement cartridges handy before you begin. You must install new cartridges immediately after removing the old ones. Caution: Leave your old cartridges in the printer until you are ready to replace them to prevent the print head nozzles from drying out.
2. Lift up the scanner unit. Caution: Do not move the print head by hand; otherwise, you may damage your product. Do not touch the flat white cable inside the printer. 3. Squeeze the tab on the cartridge and lift the cartridge straight up to remove it.
4. Before opening the new cartridge package, shake it gently four or five times. Caution: Do not shake the cartridges after opening the packages, or ink may leak. 5. Remove the cartridge from the package. Caution: Do not touch the green chip on the cartridge.
Caution: Do not remove any other labels or seals, or ink will leak. 7. Insert the new cartridge into the holder and push it down until it clicks into place. 8. Press the OK button. 9. Lower the scanner unit. The print head moves to its home position and the printer starts charging the ink.
If you see an error screen telling you an ink cartridge is installed incorrectly, lift up the scanner unit and press the ink cartridge down until it clicks into place. When you're finished, press the OK button. If you remove a low or expended ink cartridge, you cannot re-install and use the cartridge.
2. Click the Ink Cartridge Replacement icon and follow the on-screen instructions to replace your ink cartridges as necessary. Parent topic: Replacing Ink Cartridges Related concepts Purchase Epson In.
Printing With Expended Color Cartridges - Windows Printing With Expended Color Cartridges - Mac OS X Parent topic: Replacing Ink Cartridges Printing With Expended Color Cartridges - Windows If you see.
1. Click the printer icon in the Dock. 2. If you see a message telling you that you can temporarily print with only black ink, click the Delete icon to cancel your print job. Note: If the message screen appears on another computer on a network, you may need to cancel the print job using the product control panel.
Note: The window appears only when you have selected Plain Paper/Bright White Paper as the paper type setting, and depends on other selected print settings.
Adjusting Print Quality If your print quality declines, you may need to run a utility to clean or align the print head. If running these utilities does not solve the problem, you may need to replace the ink cartridges.
3. Press the arrow buttons to select Setup and press the OK button. 4. Press the arrow buttons to select Maintenance and press the OK button. You see this screen: 5.
7. Check the printed pattern to see if there are gaps in the lines. Print head is clean Print head needs cleaning 8. Do one of the following: • If there are no gaps, select No and press the OK button. Press the stop button to exit. • If there are gaps or the pattern is faint, select Yes and press the OK button to continue.
2. Do one of the following: • Windows: Right-click the product icon in the Windows taskbar. • Mac OS X 10.6/10.7/10.8 : In the Apple menu or the Dock, select System Preferences . Select Print & Fax or Print & Scan , select your product, and select Options & Supplies .
Print head needs cleaning 6. If there are no gaps, click Finish . If there are gaps or the pattern is faint, clean the print head. Parent topic: Print Head Nozzle Check Related concepts Print Head Cleaning Print Head Cleaning If print quality has declined and the nozzle check pattern indicates clogged nozzles, you can clean the print head.
Related topics Replacing Ink Cartridges Cleaning the Print Head Using the Product Control Panel You can clean the print head using the control panel on your product. 1. Make sure no product lights are indicating errors. 2. Load a few sheets of plain paper in the product.
7. Select Nozzle Check and press the OK button to run a nozzle check to confirm that the print head is clean. If you don’t see any improvement after cleaning the print head up to 4 times, turn off the product and wait at least 6 hours. Then try cleaning the print head again.
3. Select Head Cleaning . You see a window like this: 4. Click Start to begin the cleaning cycle. The power light flashes throughout the cleaning cycle and stays on when the cleaning cycle is finished. Caution: Never turn off the product during a cleaning cycle or you may damage it.
Print head needs cleaning • If there are no gaps, click Finish . • If there are gaps or the pattern is faint, click Clean to clean the print head again. If you don’t see any improvement after cleaning the print head up to 4 times, turn off the product and wait at least 6 hours.
Aligning the Print Head Using the Product Control Panel Aligning the Print Head Using a Computer Utility Parent topic: Adjusting Print Quality Related concepts Print Head Cleaning Aligning the Print Head Using the Product Control Panel You can align the print head using the control panel on your product.
6. Press the start button to print an alignment sheet. Note: Do not cancel printing while you are printing a head alignment pattern. You see this screen: 7.
8. Check the printed pattern and press the arrow buttons to choose the number representing the best printed pattern for each set. Press the OK button after each selection. Parent topic: Print Head Alignment Aligning the Print Head Using a Computer Utility You can align the print head using a utility on your Windows computer or Mac.
5. Check the printed pattern and follow the instructions on the screen to choose the number representing the best printed pattern for each set. • After choosing each pattern number, click Next . • If no patterns are aligned in one or more of the sets, choose the closest one in each set and click Realignment .
2. Use the product control panel to make a copy, but without placing a document on the scanner glass. 3. Check the back of the ejected paper to see if it is clean.
Cleaning and Transporting Your Product See these sections if you need to clean or transport your product. Cleaning Your Product Transporting Your Product Cleaning Your Product To keep your product working at its best, you should clean it several times a year.
• Leave the ink cartridges installed. Removing the cartridges can dry out the print head and may prevent the product from printing. • Do not carry the product by its control panel; this may damage the product.
9. Lower the control panel by squeezing the release bar and gently pushing the panel down. Caution: Do not lower the control panel without first squeezing the release bar or you may damage your product. 10. Place the product in its original packing materials, if possible, or use equivalent materials with cushioning around the product.
Solving Problems Check these sections for solutions to problems you may have using your product. Checking for Software Updates Product Status Messages Running a Product Check Resetting Control Panel D.
Product Status Messages You can often diagnose problems with your product by checking the messages on its LCD screen. LCD code Condition/solution (E-01) A fatal error has occurred. Turn the product off and then back on again. If the error continues, check for a paper jam.
Related concepts Check Cartridge Status Related references Paper Jam Problems Where to Get Help Related topics Replacing Ink Cartridges Printing With Black Ink and Expended Color Cartridges Loading Paper Running a Product Check Running a product check helps you determine if your product is operating properly.
7. Press the start button. After the nozzle pattern prints, you see this screen: 8. Do the following, depending on the results of the product check: • If the page prints and the nozzle check pattern is complete, the product is operating properly.
Resetting Control Panel Defaults If you have a problem with settings on the product control panel, you can reset them to their factory defaults. You can choose which settings to reset or reset them all. 1. Press the home button, if necessary. 2. Press the arrow buttons to select Setup and press the OK button.
4. Press the arrow buttons to select one of these options and press the OK button: • Wi-Fi Settings : Resets all network settings. • All except Wi-Fi : Resets all control panel settings, except for network settings. • All Settings : Resets all control panel settings.
Software Installation Problems If you have problems while installing your product software, try these solutions: • Make sure your product is turned on and any necessary cables are securely connected at both ends. If you still have problems installing software, disconnect the cable and carefully follow the instructions on the Start Here sheet.
Note: Breakdown or repair of this product may cause loss of network data and settings. Epson is not responsible for backing up or recovering data and settings during or after the warranty period. We recommend that you make your own backup or print out your network data and settings.
Selecting Wireless Network Settings From the Control Panel Network Software Cannot Find Product on a Network If EpsonNet Setup cannot find your product on a network, try these solutions: • Make sure your product is turned on and connected to your network.
Note: Avoid placing your product near a microwave oven, 2.4 GHz cordless phone, or large metal object, such as a filing cabinet. • If you are connecting the product via EpsonNet Setup and the WiFi light on your product is not solid green, make sure your product software was installed correctly.
scanning software, such as ABBYY FineReader. To download Epson Scan, visit Epson's driver download site ( U.S. downloads or Canadian downloads ). Parent topic: Solving Network Problems Related to.
5. Press the start button to print the network status sheet. (Press the stop button if you want to cancel the operation.) Examine the settings shown on the network status sheet to diagnose any problems you have. Parent topic: Solving Network Problems Solving Copying Problems Check these solutions if you have problems copying with your product.
Related concepts Print Head Nozzle Check Print Head Cleaning Product Makes Noise When It Sits for a While Your product is performing routine maintenance. This is normal. Parent topic: Solving Copying Problems Solving Paper Problems Check these sections if you have problems using paper with your product.
Related references Paper Jam Problems Paper Loading Capacity Related topics Loading Paper Paper Jam Problems If you have problems with paper jams, try these solutions: 1. Cancel the print job from your computer, if necessary. 2. Gently pull out any jammed paper from the output tray and sheet feeder.
7. Carefully follow all paper loading instructions when you load new paper. Parent topic: Solving Paper Problems Related references Paper or Media Type Settings Related tasks Cancelling Printing Using.
Nothing Prints If you have sent a print job and nothing prints, try these solutions: • Make sure your product is turned on. • Make sure any interface cables are connected securely at both ends. • If you connected your product to a USB hub, make sure it is a first-tier hub.
Product Icon Does Not Appear in Windows Taskbar If you do not see your product icon in the Windows taskbar, first try restarting your computer. If that does not work, try this solution: 1. Do one of the following: • Windows 8 : Navigate to the Start screen, right-click the screen and select All apps .
Related topics Replacing Ink Cartridges Printing is Slow If printing becomes slow, try these solutions: • Make sure your system meets the requirements for your operating system. If you are printing a high- resolution image, you may need more than the minimum requirements.
Selecting Basic Print Settings - Mac OS X Solving Page Layout and Content Problems Check these sections if you have problems with the layout or content of your printed pages.
Related tasks Selecting Print Layout Options - Windows Selecting Basic Print Settings - Mac OS X Blank Pages Print If blank pages print unexpectedly, try these solutions: • Make sure you selected the correct paper size settings in your printing program and printer software.
Selecting Basic Print Settings - Mac OS X Related topics Loading Paper Border Appears on Borderless Prints If you see a border on borderless prints, try these solutions: • Make sure you are printing on a compatible borderless paper type and size. Note: Do not select a custom paper size for borderless prints.
select See what's printing , and select your product name again, if necessary. Right-click the stalled print job, click Cancel , and click Yes . • Windows 7 : Click and select Devices and Printers . Right-click your product name, select See what's printing , and select your product name again, if necessary.
Slanted Printout If your printouts are slanted, try these solutions: • Select a higher print quality setting in your printer software. • Align the print head.
• You may need to replace the ink cartridges. Parent topic: Solving Print Quality Problems Related concepts Print Head Cleaning Print Head Alignment Related references Paper or Media Type Settings R.
Note: Your product will not operate properly while tilted at an angle. Place it on a flat, stable surface that extends beyond the base of the product in all directions.
Related tasks Selecting Basic Print Settings - Windows Selecting Basic Print Settings - Mac OS X Cleaning the Paper Path Related topics Replacing Ink Cartridges Loading Paper Grainy Printout If your printouts are grainy, try these solutions: • Make sure you loaded the printable side of the paper correctly for your product.
• Run a nozzle check to see if any of the print head nozzles are clogged. Then clean the print head, if necessary. • The ink cartridges may be old or low on ink, and you may need to replace them. • Your printed colors can never exactly match your on-screen colors.
Note: With Mac OS X 10.6, 10.7, or 10.8, in addition to scanning with Image Capture, you can download and install Epson Scan scanning software. Epson Scan provides additional image adjustment and photo correction features for enhancing scanned images, and provides an interface for TWAIN-compliant OCR scanning software, such as ABBYY FineReader.
Parent topic: Solving Scanning Problems Related tasks Scanning with Mac OS X 10.6/10.7/10.8 Using Image Capture Related topics Starting a Scan Solving Scanned Image Quality Problems Check these sections if a scanned image on your computer screen has a quality problem.
Related tasks Placing Originals on the Scanner Glass Line of Dots Appears in All Scanned Images If a line of dots appears in all your scanned images, clean the scanner glass with a soft, dry, lint-free cloth or use a small amount of glass cleaner on the cloth, if necessary.
Related topics Selecting Epson Scan Settings Image Colors are Patchy at the Edges If you are scanning a thick or warped original, cover its edges with paper to block external light as you scan it.
Related topics Selecting Epson Scan Settings Image is Scanned Upside-Down Your product scans using the Auto Photo Orientation setting. This setting checks the preview image for faces, the sky, and other features, and then correctly rotates the photo when it is scanned, if necessary.
Related concepts Image Preview Guidelines Related tasks Selecting a Scan Area - Home Mode Selecting a Scan Area - Office Mode Selecting a Scan Area - Professional Mode Scanned Image Edges are Cropped If the edges of a scanned image are cropped, make sure your original is placed correctly for scanning.
Cannot View or Print Photos from a Memory Card If you cannot view or print photos from a memory card inserted in your product, try these solutions: • Make sure you have inserted only one memory card at a time. • Make sure your memory card is compatible with the product.
Related tasks Inserting a Memory Card Transferring Photos from a Memory Card to Your Computer When to Uninstall Your Product Software If you have a problem that requires you to uninstall and re-install your software, follow the instructions for your operating system.
• Windows 7 or Windows Vista : Open the Windows Control Panel utility. Select Programs and Features . (In Classic view, select Programs and click Uninstall a program .) Select Epson Event Manager and click Uninstall/Change . • Windows XP : Open the Windows Control Panel utility.
Note: If you uninstall the printer driver and your product name remains in the Print & Fax or Print & Scan window, select your product name and click the – (remove) icon to remove it.
Technical Specifications These sections list the technical specifications for your product. Note: Epson offers a recycling program for end of life products. Please go to www.epson.com/recycle for information on how to return your products for proper disposal.
Parent topic: Technical Specifications Mac System Requirements To use your product and its software, your Mac should use one of these operating systems: • Mac OS X 10.5.8 • Mac OS X 10.6.x • Mac OS X 10.7.x • Mac OS X 10.8.x Note: Visit Epson's support website at www.
Output resolution 50 to 4800, 7200, and 9600 dpi (50 to 4800 dpi in 1 dpi increments) Image data 16 bits per pixel per color internal 8 bits per pixel per color external Light source LED Parent topic:.
Envelopes Size No. 10 (4.1 × 9.5 inches [105 × 241 mm]) Paper types Plain paper Weight 20 lb (75 g/m 2 ) to 24 lb (90 g/m 2 ) Parent topic: Technical Specifications Printable Area Specifications Note: When printing borderless, quality may decline in the expanded printable area.
Envelopes 1 Left: 0.12 inch (3 mm) minimum 2 Bottom: 0.20 inch (5 mm) minimum 3 Top: 0.20 inch (5 mm) minimum 4 Right: 0.78 inch (20 mm) minimum Parent topic: Technical Specifications Ink Cartridge Specifications Note: We recommend that you use genuine Epson cartridges and do not refill them.
Cartridge life Opened package: 6 months Unopened package: do not use if the date on the package has expired Temperature Storage: –4 to 104 ºF (–20 to 40 ºC) 1 month at 104 ºF (40 ºC) Ink freezes at 10.
Compatible types SD SDHC SDXC miniSD* miniSDHC* miniSDXC* MicroSD* MicroSDHC* MicroSDXC* MultiMedia Card MMCplus MMCmobile* MMCmicro* Memory Stick Duo* Memory Stick PRO Duo* Memory Stick PRO-HG Duo* Memory Stick Micro* Magic Gate Memory Stick Duo* Media format DCF DCF (Design rule for Camera File system) version 1.
Width Stored: 15.4 inches (390 mm) Printing: 15.4 inches (390 mm) Depth Stored: 11.8 inches (300 mm) Printing: 20.8 inches (528 mm) Weight 9.3 lb (4.2 kg) (without ink cartridges and power cord) Paren.
Parent topic: Technical Specifications Interface Specifications Interface type Hi-Speed USB (Device Class for computers) Parent topic: Technical Specifications Network Interface Specifications Wireless LAN standard IEEE 802.11 b/g/n Wireless security WPA-PSK (TKIP/AES); WPA2 compliant with support for WPA/WPA2 Personal Frequency band 2.
modification of the product. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation of the device.
Notices Check these sections for important notices about your product. Note: Epson offers a recycling program for end of life products. Please go to www.
For Canadian Users This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations. Cet appareil numérique de la classe B respecte toutes les exigences du Règlement sur le materiel brouilleur du Canada.
ifupdown-0.6.8 kernel-2.6.18 lsp-arm-versatile926ejs-2.6.18_pro500 module-init-tools-3.2pre1 mount-2.12 net-tools-1.60 netbase-4.29 psmisc-21.5 readline-libs-5.
This printer product includes the open source software program "Net-SNMP" which applies the terms and conditions provided by owner of the copyright to the "Net-SNMP".
This printer product includes the open source software program "busybox- 1.2.2.1 " which applies the terms and conditions provided by owner of the copyright to the "busybox". linux-ftpd license This printer product includes the open source software program "linux-ftpd-0.
Parent topic: Notices Copyright Notice All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of Seiko Epson Corporation.
THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
デバイスEpson XP-300の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Epson XP-300をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはEpson XP-300の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Epson XP-300の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Epson XP-300で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Epson XP-300を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はEpson XP-300の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Epson XP-300に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちEpson XP-300デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
