Extron electronicメーカーP/2 DA12 Seriesの使用説明書/サービス説明書
ページ先へ移動 of 32
User ’s Manual VGA Distribution Amplifiers 68-1475-01 Rev . A 04 08 P/2 DA8 and P/2 DA12 Series.
Pr ecautions This symbol is intended to alert the user of important opera ting and mainten ance (se rvicing ) instru ctions i n the literature provided with the equipment. This symbol is intended to alert the user of the presence of uninsulated dangerous voltage within the product’s enclosure that may present a risk of electric shock.
FCC Class A Notice This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules.
.
i P/2 DA8 and P/2 DA12 • T able of Contents i T able of Contents 68-1475-01 Rev A 04 08 All trademarks mentioned in this manual are the properties of their respective owners. Chapter One • Introduction .............................................
ii P/2 DA8 and P/2 DA12 • T able of Contents T able of Contents, cont’d.
P/2 DA8 and P/2 DA12 Series 1 Chapter One Intr oduction About this Manual Description of P/2 DA8 and P2 DA12 Series Features of P/2 DA8 and P2 DA12 Series.
P/2 DA8 and P/2 DA12 • Introduction Intr oduction 1-2 About This Manual This manual contains information about the Extron P/2 DA8, P/2 DA8 A, P/2 DA12 and P/2 DA12 A distribution amplifiers with instructions on how to mount, install, and operate these units.
P/2 DA8 and P/2 DA12 • Introduction 1-3 Features of P/2 DA8 and P/2 DA12 Series Bandwidth — 350 MHz (-3dB) RGB video bandwidth, fully loaded, which is compatible with resolutions fr om VGA to QXGA.
P/2 DA8 and P/2 DA12 • Introduction Introduction, cont’d 1-4.
P/2 DA8 and P/2 DA12 Series 2 Chapter T wo Installation and Operation Installation Overview Mounting the Distribution Amplifier Front Panel Features Rear Panel Features Operation T roubleshooting.
P/2 DA8 and P/2 DA12 • Installation and Operation Installation and Operation 2-2 Installation Overview The distribution amplifiers can be mounted on tabletops, in racks and under furniture. Thr ough-desk mounting is not recommended for these pr oducts.
P/2 DA8 and P/2 DA12 • Installation and Operation 2-3 overloading might have on overcurr ent protection and supply wiring. Give appropriate consideration to the equipment nameplate ratings when addressing this concern. 5 . Reliable earthing (grounding) — Maintain reliable grounding of rack-mounted equipment.
P/2 DA8 and P/2 DA12 • Installation and Operation Installation and Operation, cont’d 2-4 Under -desk mounting Mount the unit under a desk or podium using the optional Extron MBU 149 kit (part #70-222-01) as follows: 1 . Remove rubber feet if these have been installed on the bottom of the unit.
P/2 DA8 and P/2 DA12 • Installation and Operation 2-5.
P/2 DA8 and P/2 DA12 • Installation and Operation Installation and Operation, cont’d 2-6 Front Panel Featur es The front panels in the figur e below show the P/2 DA8 series (upper panel) and P/2 DA12 (lower panel).
P/2 DA8 and P/2 DA12 • Installation and Operation 2-7 Rear Panel Features All power , input and output connections are located on the r ear panels of all models, as shown in the figure below . L2 R L1 R L4 R L3 R L6 R L5 R L8 R L7 R 24 68 1 A3 57 8 7 6 5 4 3 2 INPUT VIDEO OUTPUTS AUDIO OUTPUTS MUTE 1 50/60 Hz 100-240V 0.
P/2 DA8 and P/2 DA12 • Installation and Operation Installation and Operation, cont’d 2-8 Operation After the distribution amplifier and its connected devices are powered up, the system is fully operational. If any pr oblems occur , ensure that the cables ar e properly r outed and connected.
P/2 DA8 and P/2 DA12 • Installation and Operation 2-9 Video Input and Output Connections All models are able to accept RGBHV , RGBS, RGsB, RsGsBs, YUV (tri-level and bi-level sync), S-video and composite video, and resolutions fr om VGA (640 x 480) to QXGA (2048 x 1536).
P/2 DA8 and P/2 DA12 • Installation and Operation Installation and Operation, cont’d 2-10 Audio input For models P/2 DA8 A and P/2 DA12 A, use a female 3.5 mm mini T ip Ring Sleeve (TRS) connector to provide an unbalanced audio input. Switch off power to the distribution amplifier and audio source.
P/2 DA8 and P/2 DA12 • Installation and Operation 2-11 Unbalanced Stereo Output Tip NO GROUND HERE. Sleeve(s) Tip NO GROUND HERE. Balanced Stereo Output Tip Ring Sleeve(s) Tip Ring L R L R Left Right Left Right CAUTION For unbalanced audio , connect the sleeve(s) to the center contact ground.
P/2 DA8 and P/2 DA12 • Installation and Operation Installation and Operation, cont’d 2-12 T roubleshooting After input and display devices are connected to the distribution amplifier and all units are power ed up, the system is fully operational.
P/2 DA8 and P/2 DA12 Series A Appendix A Refer ence Information Specifications Included Parts Accessories.
P/2 DA8 and P/2 DA12 • Reference Information Refer ence Information A-2 Specifications Video Gain ................................................. Unity Bandwidth ...................................... 350 MHz (-3 dB) Video Input Number/signal type .
P/2 DA8 and P/2 DA12 • Reference Information A-3 Sync Input type ....................................... RGBHV , RGBS, RGsB, RsGsBs; bi-level and tri-level sync Output type .
P/2 DA8 and P/2 DA12 • Reference Information Reference Information, con t’d A-4 Audio — P/2 DA8 A, P/2 DA12 A Gain ................................................. Unbalanced output: 0 dB; Balanced output: + 6 dB Frequency r esponse ...........
P/2 DA8 and P/2 DA12 • Reference Information A-5 Contact closure pin configurations P/2 DA8 series................... A = mute all outputs, 1 = mute output 1, 2 = mute output 2, 3 = mute output 3,... 8 = mute output 8 P/2 DA12 series...............
P/2 DA8 and P/2 DA12 • Reference Information Reference Information, con t’d A-6 Included Parts Included Parts Part number P/2 DA8 60-891-02 or P/2 DA8 A 60-891-01 or P/2 DA12 60-893-02 or P/2 DA12 A 60-893-01 IEC Power Cord T weeker Rubber Feet (4) 3.
P/2 DA8 and P/2 DA12 • Reference Information A-7 Accessories Part number SY VGAM-RGBHVF , VGA male to BNC female molded adapter , various lengths 26-397-01 SY VGAM-RGBHVF , VGA male to BNC female pi.
P/2 DA8 and P/2 DA12 • Reference Information Reference Information, con t’d A-8.
FCC Class A Notice Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide r easonable protection against harmful interference when the equipment is operated in a commercial envir onment.
© 2008 Extron Electronics. All rights reserved. Extron Electronics, USA 1230 South Lewis Street Anaheim , CA 92805 800.633.9876 714.491.1500 FAX 714.491.1517 Extron Electronics, Europe Beeldschermweg 6C 3821 AH Amersfoort, The Netherlands +800.3987.6673 +31.
デバイスExtron electronic P/2 DA12 Seriesの購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Extron electronic P/2 DA12 Seriesをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはExtron electronic P/2 DA12 Seriesの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Extron electronic P/2 DA12 Seriesの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Extron electronic P/2 DA12 Seriesで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Extron electronic P/2 DA12 Seriesを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はExtron electronic P/2 DA12 Seriesの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Extron electronic P/2 DA12 Seriesに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちExtron electronic P/2 DA12 Seriesデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。