Alpineメーカーcda-7873の使用説明書/サービス説明書
ページ先へ移動 of 36
EN FR ES ES IT SE R R ALPINE ELECTRONICS, INC. Tokyo office: 1-1-8 Nishi Gotanda, Shinagawa-ku, Tokyo 141-8501, Japan Tel.: (03) 3494-1101 ALPINE ELECTRONICS OF AMERICA, INC. 19145 Gramercy Place, Torrance, California 90501, U.S.A. Tel.: 1-800-ALPINE-1 (1-800-257-4631) ALPINE ELECTRONICS OF CANADA, INC.
CD changer for CD A-7977/ CDA-7876/CD A-7875/CD A-7873 Changeur CD pour CD A-7977/ CDA-7876/CD A-7875/CD A-7873 Cambiador de CD para CD A-7977/ CDA-7876/CD A-7875/CD A-7873 CHA-S624 CD changer for CD .
1 -EN ENGLISH Contents Operating Instructions W ARNING W ARNING .................................................. 2 CA UTION ................................................... 2 PRECA UTIONS ......................................... 2 Basic Operation Detaching the Front Panel .
2 -EN WARNING This symbol means important instructions. Failure to heed them can result in serious injury or death. DO NOT OPERA TE ANY FUNCTION THA T T AKES YOUR A TTENTION A WA Y FROM SAFEL Y DRIVING YOUR VEHICLE. Any function that requires your prolonged attention should only be performed after coming to a complete stop.
3 -EN Never Attempt the Following Do not grip or pull out the disc while it is being pulled back into the player by the automatic reloading mechanism. Do not attempt to insert a disc into the unit when the unit power is of f. Inserting Discs Y our player accepts only one disc at a time for playback.
4 -EN Basic Operation PO WER MODE/BBE/ A udio Control RESET MUTE CLK ANGLE 8 9 Detaching the Fr ont P anel 1 Press and hold the PO WER button f or more than 3 seconds to turn off the power . 2 Press the (Release) button at upper left side until the front panel pops out.
5 -EN Displa y Angle Adjustment Mov able displa y The mov able displa y may be adjusted to 3 different angles depending upon user pref erence. 1 Press the ANGLE 89 button to adjust the angle of the mov able displa y . NOTES • The display will close a half minute after the ignition ke y is turned to the OFF position.
6 -EN Basic Operation SETUP CLK TUNE g DN f UP MODE/Audio Contr ol Dimmer Contr ol Set the DIMMER control to A UTO to decrease the illumination brightness of the unit with the head lights of the vehicle ON. This mode is useful if you feel the unit's bac klighting is too br ight at night.
7 -EN 3 Press the TUNE button to toggle mode between SUB-W ON and SUBW OFF . 4 Press the SETUP button after setting the SUB - W ON. 5 Press the MODE button repeatedly to select the SUB-W mode. Press the g DN or f UP b utton after selecting the SUB-W mode, and the subwoof er output phase is toggled SUBW NOR (0 °) or SUBW REV (180 °).
8 -EN Basic Operation 5 T o adjust the v olume, etc., first press the SOURCE button and select the A UX mode, then make the necessary adjustment. NOTE When using the V ersatile Link T erminal (KCA-410C), you can connect two external inputs. T o select the mode, pr ess the BAND b utton on the unit.
9 -EN → 60Hz ↔ 70Hz ↔ 80Hz ↔ 90Hz ← → 180Hz ↔ 150Hz ↔ 130Hz ↔ 100Hz ← 2-1 Setting the treb le Center frequency: Press g DN or f UP b utton to select the desired treble Center frequency . → 10kHz ↔ 12.5kHz ↔ 15kHz ↔ 17.5kHz ← Emphasizes the displa yed T re ble frequency ranges .
10 -EN Basic Operation f UP g DN B-FWD/DEFEA T DISP/B.OUT Setting Bass Forwar d The Bass F orward function shifts the lo w frequency's energy component to the front. This mov es the high energy , dynamic bass sound to the front sound stage. 1 Press the B-FWD b utton to activate the Bass F orward setting mode .
11 -EN Black out Mode On and Off CD A-7977 only When the Black out mode is tur ned on, the display will turn off to reduce power consumption. This additional power enhances the sound quality . 1 Press and hold the B.OUT button f or at least 3 seconds to star t the blac kout mode .
12 -EN Displa ying the Title/T ext It is possible to displa y the CD/Station title if the title has been pre viously inputted. For details, see Titling Disc/Stations (page 13). T ext inf or mation, such as the disc name and the trac k name, will be display ed if playing a CD te xt compatible disc.
13 -EN Titling Discs/Stations It is possible to title y our f av orite CD's or radio stations. 1 Press the TITLE button and select the title display mode . F or details, see Displa ying the Title/T ext (page 12). 2 Press and hold the TITLE b utton for at least 3 seconds.
14 -EN Radio Operation SOURCE B AND g DN f UP TUNE/A.ME Preset buttons (1 thr ogh 6) A utomatic Seek T uning 1 Press the SOURCE button until a r adio frequency appears in the displa y . 2 Press the BAND button repeatedly until the desired radio band is displa yed.
15 -EN Manual Storing of Station Presets 1 Select the radio band and tune in a desired radio station you wish to store in the preset memory . 2 Press and hold any one of the Preset b uttons (1 through 6) f or at least 2 seconds until the station frequency on the displa y blinks .
16 -EN CD Player Operation SOURCE c - / J Insert a disc with the label side facing up. → TUNER → CD → CD CHANGER ∗ f UP g DN M.I.X. REPEA T SCAN Pla ybac k 1 Press the c button. The mov able display will open. 2 Inser t a disc with the label side f acing up .
17 -EN Music Sensor (Skip) 1 Momentarily press the g DN button once during CD play to return to the beginning of the current trac k. If you wish to access the beginning of a track further back, repeatedly press until you reach the desired tr ack. Press the f UP b utton once to advance to the beginning of the ne xt trac k.
18 -EN Contr olling CD Changer (Optional) An optional 6-disc or 12-disc CD Changer ma y be connected to the CD A-7977/CDA-7876/CD A- 7875/CD A-7873 if it is Ai-NET compatib le.
19 -EN Multi-Changer Selection Alpine's Ai-NET system will suppor t up to 6 CD Changers. When operating two or more changers, the KCA-400C (Multi-Changer Switching de vice) must be used. If you use 1 Switching de vice, you can connect up to 4 CD Changers.
20 -EN XM Radio Operation SOURCE Preset buttons (1 thr ough 6) B AND TUNE f UP g DN SETUP Receiving XM Channels with the XM Receiver (Optional) XM Satellite Radio* is the ne xt generation of audio enter tainment, with up to 100 br and-new digital channels.
21 -EN Storing XM Channel Presets 1 Press the B AND button to select the desired band (XM1 or XM2) you w ant to store. 2 After tuning in the desired channel, press and hold any one of the Preset b uttons (1 thr ough 6) f or at least 2 seconds until the channel number on the displa y blinks .
22 -EN XM Radio Operation CA T f UP g DN TITLE Changing the Displa y T ext inf or mation, such as the channel name , ar tist name/f eature, and song/progr am title, is av ailable with each XM channel. The unit can displa y this text inf or mation as e xplained below .
23 -EN Remote Contr ol Operation 8 g DN Button Radio mode: SEEK (DN) Button CD mode: Press the button to go back to the beginning of the current trac k. 9 f UP Button Radio mode: SEEK (UP) Button CD mode: Press the button to adv ance to the beginning of the ne xt trac k.
24 -EN Battery Replacement CD A-7977/CDA-7876/CD A-7875 only Applicable battery: Use two “AAA” sized dr y batteries or equivalent. 1 Opening the battery cover Slide out the battery cover while firmly pressing the direction of arrow . 2 Replacing the battery Put the batteries in the case obser ving the polarities as illustrated.
25 -EN Information CD CD Play er/Changer not functioning. • Out of operating temperature range +50˚C (+120˚F) for CD. - Allo w the vehicle's interior (or trunk) temperature to cool. CD playbac k sound is wavering. • Moisture condensation in the CD Module.
26 -EN Indication for CD Pla yer • Protective circuit is acti vated due to high temperature. - The indicator will disappear when the temperature returns to within operation range. • No CD is inserted. - Insert a CD. • Although a disc is inserted, “T -- --- ” is displayed and the unit does not start to play or eject the disc.
27 -EN Specifications FM TUNER SECTION T uning Range 87.7 – 107.9 MHz Mono Usable Sensiti vity 9.3 dBf (0.8 µV/75 ohms) 50 dB Quieting Sensitivity 13.5 dBf (1.3 µV/75 ohms) Alternate Channel Selectivity 80 dB Signal-to-Noise Ratio 80 dB Stereo Separation 45 dB Capture Ratio 2.
28 -EN Installation and Connections Caution HA VE THE WIRING AND INST ALLA TION DONE BY EXPERTS. The wiring and installation of this unit requires special technical skill and experience. T o ensure safety , always contact the dealer where you purchased this product to hav e the work done.
29 -EN Installation Caution When you install this unit in your car , do not remov e the Detachable Front Panel. If the Detachable Front Panel is remov ed during installation, you might press too hard and warp the metal plate that holds it in place. 1 Slide the mounting slee ve into the dashboard.
30 -EN Installation and Connections Connections F or details on how to set the Subwoofer to ON/OFF , see “Subwoofer On and Of f” on page 6. Subwoofers T o amplifier or equalizer Ignition Key T o v.
31 -EN % Right Rear (+) Speaker Output Lead (Violet) (CD A-7876/CD A-7875/CD A-7873 only) & Left Rear (+) Speaker Output Lead (Green) (CD A-7876/CD A-7875/CD A-7873 only) ( Left Rear ( – ) Speak.
32 -EN.
Fidèles à leur engagement de ne fournir que des produits de qualité, ALPINE ELECTRONIQUE DE L'AMERIQUE INC. et ALPINE ELECTRONIQUE DU CANADA INC. (Alpine) sont heureuses de vous offrir cette garantie. Nous vous suggérons de le lire attentivement et en entier.
LIMITED W ARRANTY ALPINE ELECTRONICS OF AMERICA, INC. AND ALPINE OF CANADA INC. ("Alpine"), are dedicated to quality craftsmanship and are pleased to offer this Warranty. We suggest that you read it thoroughly. Should you have any questions, please contact your Dealer or Alpine at one of the telephone numbers listed below.
デバイスAlpine cda-7873の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Alpine cda-7873をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはAlpine cda-7873の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Alpine cda-7873の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Alpine cda-7873で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Alpine cda-7873を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はAlpine cda-7873の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Alpine cda-7873に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちAlpine cda-7873デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。