Garminメーカー100の使用説明書/サービス説明書
ページ先へ移動 of 26
Alpha ™ 100 and TT ™ 10 Owner’s Manual May 2013 190-01500-00_0B Printed in Taiwan.
All rights reserved. Under the copyright laws, this manual may not be copied, in whole or in part, without the written consent of Garmin. Garmin reserves the right to change or improve its products and to make changes in the content of this manual without obligation to notify any person or organization of such changes or improvements.
Table of Contents Getting Started ............................................................... 1 Setting Up the Alpha System ..................................................... 1 Device Overviews ..................................................
Setting an Alarm ...................................................................... 12 Starting the Countdown Timer ................................................. 12 Opening the Stopwatch ........................................................
Getting Started WARNING See the Important Safety and Product Information guide in the product box for product warnings and other important information. Setting Up the Alpha System NOTICE Avoid using a high-powered radio (greater than 5 watts) in close proximity to the device.
4 Press the battery into place. 5 Replace the battery cover, and turn the D-ring clockwise. Charging the Handheld Device NOTICE To prevent corrosion, thoroughly dry the mini-USB port, the weather cap, and the surrounding area before charging or connecting to a computer.
Dog Collar Device Setup Methods to Add a Dog to a Handheld Device If you purchased the collar and the handheld device separately, you must add the collar to the handheld device.
2 Select a dog. 3 Select Show Info > > Change Dog Type . 4 Select a dog type. Changing the Dog ID Before you can change the dog ID, the collar must be turned on and within range of the handheld device. If you are experiencing interference from other collars or handheld devices in the area, you might need to change the ID for the dog.
Tracking Your Dog on the Map Before you can track a dog or contact on the map, you must add them to the handheld device ( page 3 and page 8 ). You can view the dog's location and other contacts' locations on the map. 1 Select . 2 If necessary select and to zoom in and out of the map.
1 Select Setup > Location Alerts > Add Alert > Radius . 2 Select the unit of measurement. 3 Enter the radius distance, and select . Editing Location Alerts 1 Select Setup > Location Alerts . 2 Select an alert. 3 Select an option: • Select Disable to turn off notifications for this alert.
With plenty of repetition, consistency, patience, and a lot of praise, the dog should begin to obey these commands after several lessons. Each dog learns at a different rate, and some dogs may take longer to learn these commands.
dog as long as the key is held, for a maximum of 8 seconds. Your stimulations should typically be far shorter than 8 seconds. Continuous stimulation can be useful when first starting training with your dog. You can also train using a tone ( T ). When you select T for a key, the key press activates an audible tone instead of stimulation.
Changing Your Contact ID If you are experiencing interference from other collars or handheld devices in the area, you might need to change the contact ID for your handheld device. 1 Select Setup > Contacts > Pairing Setup > ID . 2 Select a contact ID that is not yet assigned to another device in the area.
3 Select > Average Location . 4 Move to the waypoint location. 5 Select Start . 6 Follow the on-screen instructions. 7 When the confidence status bar reaches 100%, select Save . For best results, collect 4 to 8 samples for the waypoint, waiting at least 90 minutes between samples.
2 Select TracBack . The map page opens with your route marked with a magenta line. 3 Navigate using the map ( page 11 ) or the compass ( page 11 ). Changing the Track Color 1 Select > Track Manager . 2 Select a track. 3 Select Set Color . 4 Select a color.
Where To? Menu You can use the Where To? menu to find a destination to navigate to. Not all Where To? categories are available in all areas and maps. Finding a Waypoint by Name 1 Select > Where To? > Waypoints > > Spell Search . 2 Enter the name.
Satellite Page The satellite page shows your current location, GPS accuracy, satellite locations, and signal strength. Changing the Satellite View By default, the satellite view is with North at the top. You can change the view of the satellites to be oriented with your current track toward the top of the screen.
Automotive Mode shows an automotive perspective with the direction of travel at the top. Guidance Text : Sets when the guidance text on the map is shown. Dashboard : Selects a dashboard to display on the map. Each dashboard shows different information about your route or your location.
Marine Alarm Setup : Sets alarms for when you exceed a specified drift distance while anchored, when you are off course by a specified distance, and when you enter water of a specific depth. Device Information Viewing Device Information You can view the unit ID, software version, and license agreement.
2 Use the slider to adjust the backlight level. The device may feel warm when the backlight setting is high. Adjusting the Backlight Timeout You can decrease the backlight timeout to maximize the battery life. 1 Select Setup > Display > Backlight Timeout .
Connecting the Collar to a Computer NOTICE To prevent corrosion, thoroughly dry the contacts on the collar and the surrounding area before connecting the charging clip. You can connect the collar to your computer to use with programs like BaseCamp. The collar is not a mass storage device.
Removing the Old Battery Before you replace the battery, you must remove all dirt, water, and debris from the device. Also, you need a small Phillips screwdriver. 1 Remove the six screws from the outer edges of the back plate. TIP: You should leave the two inner screws in place.
Bearing : The direction from your current location to a destination. You must be navigating for this data to appear. Cadence : The revolutions of the crank arm or strides per minute. Your device must be connected to a cadence accessory. Course : The direction from your starting location to a destination.
Index A accessories 1, 17 alarms clock 12 marine 14 proximity 12 tones 13 alerts dog 4 location 5, 6 almanacs 12 altimeter 14 calibrating 12 ANT+ sensors, pairing 17 A.
.
www.garmin.com/support 913-397-8200 1-800-800-1020 0808 238 0000 +44 870 850 1242 1-866-429-9296 +43 (0) 820 220 230 +32 2 672 52 54 +45 4810 5050 +358 9 6937 9758 + 331 55 69 33 99 +49 (0)180 6 42764.
デバイスGarmin 100の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Garmin 100をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはGarmin 100の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Garmin 100の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Garmin 100で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Garmin 100を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はGarmin 100の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Garmin 100に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちGarmin 100デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
